Isp server access problem in WRT120N

Hi there,
I just got WRT120N. working fine for internet. but just getting one probmel my isp has a local fileserver. address is http://10.25.5.53:801/ . Now i can't go to the site. when i try without the router it work fine but when i try with the router it just can't find the address.
Now i have no idea what to do.??
Any one help? Waiting...
Md. Riaz Uddin Masum
http://www.activelava.net
[email protected]
Contact Me Facebook Twitter
Chat masumnz masumonline masum98
Web Developer Play Ground google adsense on your joomla site
Latest tweet: @omiazad yaa sure about that
Follow @masumonline Reply Retweet 19:37 Feb-25
Get this email app!
My Playground
http://www.activelava.net

hi, i try your idea. but fail from the sky. no luck now on. Here is the details ifno.
My lan card is DHCP mode. i have to dial PPPOE to the isp. every thing fine. when i try with the router i connect to the internet but not on there file server. i stop NAT from my router. Try router DHCP on and off. try to assine IP on DNS. Nothing work. i know there server is on RadHat.
Here is the lan properties. when connected direct via DHCP.
Here is the properties when i dial pppoe.
One more thing i have to use a MAC provided by them. i did MAC clone but u know........ .
Waiting...
Md. Riaz Uddin Masum
http://www.activelava.net
[email protected]
Contact Me Facebook Twitter
Chat masumnz masumonline masum98
Web Developer Play Ground FTP and the LinkSys Router
Latest tweet: FTP and the LinkSys Router | Networking http://t.co/c4UFCvK
Follow @masumonline Reply Retweet 02:10 Feb-27
My Playground
http://www.activelava.net

Similar Messages

RE: Database (SQL-SERVER) access problem

Have you used NT Control Panel/ ODBC to set up the ODBC data source name?
You have to define the data source (database) SecTrade as well as the
driver to be used (SQL Server). This can be done by selecting the Add
button on the Data Sources screen in Control Panel/ ODBC.
Hope this helps.
Sanjay Murthi
Indus Consultancy Services, Inc.
From: Administrator
Sent: Wednesday, August 13, 1997 6:49 PM
To: "'[email protected]'"
Cc: murthis; thyagarajm; thyagarm; vasasm; chandraa
Subject: Database (SQL-SERVER) access problems
MCI Mail date/time: Mon Aug 11, 1997 10:28 pm EST
Source date/time: Mon, 11 Aug 1997 19:25:34 +0530
Hi Forte-Users,
We have a setup a Sql-Server database on a NT server. In the Forte
EConsole,
we have
setup a ODBC-type Resource for this server, named SERVER2_ODBC. This NT
server
is configured as a Client Node in the active Forte environment. Note
that
Server2 is not
the Forte server, but has Forte installed. There is another NT server
which
acts as the
Forte server. NODEMGR and Sql-Server are running on SERVER2.
In our application, we have a DBSession SO with the database source
as SERVER2_ODBC, Userid=ForteInstructor. When running the application,
Forte
throws an exception, the gist of it being as follows:
USER ERROR: (This error was converted)
Failed to connect to database: SecTrade, username: ForteInstructor.
[Microsoft][ODBC Driver Manager] Data source name not found and no
default
driver specified
We have tried
1) Installing ODBC drivers on the NT server (Server2)
2) Accessing local databases from Forte clients which works fine
3) Accessing the Sql-Server database through Isqlw (Sql-Server Client
s/w) -
It works.
Could someone suggest what we should try to get rid of this problem?
Thanks for any help,
Kishore Puvvada

Rajsarawat wrote:
Dear sir/mam,
I have installed sql server 2005 (server) and on another computer installed client. It installed successfully but on client side it does not seen, from where should i start it. so please send me procedure to install sql server 2005 on both side(client and server).You have to turn on network (external to your computer) access.
Under programs->sql server look for "surface"

Proxy server access problems

Hello all, I'm hoping to find a network wizard for this one...
First let me say that I have no IT support from work as they do not support Mac hardware. And the team that set up the site for us to use have no interest or time in giving us any help getting this set up for Mac since it works for PC just fine. Man I hate living in a PC world.
So it is out of sheer stubbornness and love for my mac that I am trying find the answer to my dilemma, which is this:
Setting up my Mac to access a proxy server does not seem to be giving me the same results as setting my windows box to access the same proxy server; and I can't figure out why. Here are the details:
There is a social networking control panel that I need to log in to and administer for my work. The powers that be have set up IP filtering on that site as a means of security. Only an IP from inside the company's network can access the site.
I work from home and have an IP external to the company's network. To get around the problem of access to the site the administrators set up a Web Proxy for us to use.
To access the web proxy, we first have to set up a VPN session with the corporate network. This is done by logging in through a corporate portal, authenticating credentials, at which point a program called Network Connect makes the VPN connection. The proxy will not work without first making this connection.
The problem occurs trying to connect to the proxy. I login using Safari ok. Then I'll go to System Preferences > Network > Configure > Proxies and enter in the IP for the HTTP and HTTPS. I no longer have internet access at this point which I take to mean the proxy is not working for me.
If it helps, to get this to work on Windows, I take the following steps; Login to the coporate network via portal site using Internet Explorer. I go to Tools > Internet Options > Connections > LAN settings and enter in the IP for the proxy server. At which point I still have internet access and I can now access the site I need for my work.
I've always thought that whatever you could do on Windows, you could do on a Mac. It seems like this should be something simple; like some little nuance between how each OS works with proxy servers. I've tried a troubleshot a lot of different connection approaches but still nothing. I've got my fingers crossed here guys. Please help!

Then I'll go to System Preferences > Network > Configure > Proxies and enter in the IP for the HTTP and HTTPS. I no longer have internet access at this point which I take to mean the proxy is not working for me.
I do not know the answer to your query. But I do know that the things you enter into the Network Preferences act LOCALLY, and kill your connection. That is not where the stuff you want should be entered.

XI SERVER ACCESS PRoblem

When I try to access the XI Server, I am getting the startup failed error. Following is the general application onfo for that error. Any help greatly appreciated.
General
Startup status startup failed
Initial Exception com.sap.aii.utilxi.prop.api.PropertiesException: Unable to read configuration data (ExchangeProfile/aii.properties)
     at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:202)
     at com.sap.aii.utilxi.misc.api.AIIProperties.initServerMode(AIIProperties.java:355)
     at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:95)
     at com.sap.aii.ibrep.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:142)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:374)
     at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:201)
     at com.sap.aii.ib.web.clidist.JnlpServlet.handleFirstCall(JnlpServlet.java:286)
     at com.sap.aii.ib.web.clidist.JnlpServlet.doGet(JnlpServlet.java:91)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Last Exception com.sap.aii.utilxi.prop.api.PropertiesException: Unable to read configuration data (ExchangeProfile/aii.properties)
     at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:202)
     at com.sap.aii.utilxi.misc.api.AIIProperties.initServerMode(AIIProperties.java:355)
     at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:95)
     at com.sap.aii.ibrep.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:142)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:374)
     at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:201)
     at jsp_Main1102836130981._jspService(jsp_Main1102836130981.java:21)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:467)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:181)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Application ID REPOSITORY
Logging Implementation Dual SAP/AII Logging
Logging Context "", "", user=""
File Access
System root directory E:\usr\sap\PXI\SYS\global\xi\repository_server
Transport
Export directory E:\usr\sap\PXI\SYS\global\xi\repository_server\export
Import directory E:\usr\sap\PXI\SYS\global\xi\repository_server\import
Imported files directory E:\usr\sap\PXI\SYS\global\xi\repository_server\import\importedFiles

Hi,
Try to use the ip Adress.
http://10.10.10.10:50000/rep/start/index.jsp
When it works goto (only on Windows)
Windows/System32/drivers/etc -> "host" file.
and set
10.10.10.10(ip) Hostname
for example
10.120.102.11 myServer
So you can use the DNS Name on your Client to access the XI.
Regards,
Robin

The Lync Server Access Edge service not starting (ipconfig / certificate problem?)

hey guys,
I am trying to install lync server 2010 for the first time. After installing everying i have a problem on the edge server, the Lync Server Access Edge services doesn't want to start and is giving specific error:
The Lync Server Access Edge service terminated with service-specific error %%-2146762480.
i have searched in the forums, i only read that it might have something to do with the ip config or the certificates, but i have no idea what exactly.
I have the following servers:
sql server (domain member)
Archive server (domain member)
Monitoring server (domain member)
and the edge server (not a domain member)
this edge server has two nics, one with a internal address and one with a public address.
for the internet side i used an internal AD CA for a certificate, for the external side i used a go daddy certificate.
does anyone has any idea? i am happy to provide additional information.
thx, JW

Hey Tim,
thanks for helping me. I am using one IP address externally. And if i understand correctly i am using port 443, 444 and 5061 (as suggested automatically by the topology builder)
internally i used an internal CA and external i used a godaddy multidomein certificate, as we are planning to use multiple domains on it. i used the wizard from the setup. i ran a request. In the wizard i see then the follwing Subject names and
subject alternate names:
sip.domain1.xx
webconf.domain1.xx
and then in the next screen i can check other domains, so i checked also the other domains:
domain2.xx
domain3.xx
domain4.xx
domain1.xx (also the first domain is here and i checked it to be sure)
while i was gathering this information i noticed that the certificate wizard says that the external ede certifciate status = invalid. So there is my problem mostlikely. Although i do not understand why it is invalid.
So when using 1 ip address externally you will need to change the ports in your topology.
Under Edge Pools - > Right click your edge pool and click edit, down near the bottom make sure "Enable seperate FQDN and ip address for web etc...) is UNCHECKED.
the first FQDN, sip.domain.com port 443(TLS), the other 2 for webconf and av just change the port numbers. so when you request your 2 certs the only names will be the pool FQDN and sip.domain and your other sip domains. on your router/gateway open the 3
ports you selected from Outbound -> Inbound. for your external DNS sip.domain -> external IP address going to your firewall/gateway.
note that your edge server is not on the domain so you will need to edit your hosts file and add your frontend pool/server internal ip address and FQDN server name.
When you get "invalid" for the certificate what cert is it? the internal CA or GoDaddy?

How do I enter UserID and password to access my pasworded space on ISP server

I need to view and upload files to my web page space on my ISP server. I can connect using "ftp.(ISP).com but must enter my UserID and password to get to my files. How do I do this in Firefox?

You can prefix the URL with the username to force Firefox to display a connection pop-up.
*http://[email protected]/
*ftp://[email protected]/

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

Non-SysAdmins get error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.

I have a SQL 2008 R2 system (10.50.4000) where I'm having problems connecting any user that is not a SysAdmin. Example: I setup a new SQL Login to use Windows Authentication and grant that user db_datareader on the target database. The user attempts
to connect using Excel client or Access or SQL Management Studio and receives Error 18456. The SQL Server Logs shows Error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
The strange part is that if I temporarily grant the user the sysadmin server role then the user can connect successfully and retrieve data. But, if I take away that sysadmin server role then the user can no longer connect but again receives the Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
We've turned off UAC on the client machine to see if that was the problem, but no change.
I have dropped and re-added the user's SQL Login (and the related database user login info). No success.
The Ring Buffers output shows:
The Calling API Name: LookupAccountSidInternal
API Name: LookupAccountSid
Error Code: 0x534
Thanks for any help.
-Walt

Yes, you understand correctly. The user is logging onto a workstation (not the server) with a Windows Authenticated id. The user is using either Excel or Access or SSMS and connecting to the server using a Windows Authenticated SQL Login account.
If the account has sysadmin role (which is only for testing) then the connection is successful. If I take away sysadmin role from the account then the connection is unsuccessful and the SQL Server Log shows Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
(SQL Authentication is not an option here. I must use Windows Authentication).
Any other troubleshooting assistance you can offer would be appreciated. Thanks.
-Walt

JNDI NIS object access problem

JNDI NIS object access problem:
Hi all,
After long fight, i'm now able to connect to my NIS server on my network. the initial context factory is 'com.sun.jndi.nis.NISCtxFactory' and provider url are given and i obtain namingennumeration of items in the NIS directory.
purpose of my project:
using ypcat command we can view the services,passwd,host... objects in unix.
my project requirement is that i shd open this 'services' object in java (using JNDI probably) and shd access its content.
i'm able to obtain the object and the type of this object is 'NISCtxServices' defined in 'com.sun.jndi.nis.NISCtxFactory' package, but all the classes and methods except some are not public and so im not able to use almost all the methods in this class 'NISCtxServices' .
Can any one help me in accessing the information inside this object.
Thanks in advance! and i'm waiting!

It's because JFrame does not have a public progessbar variable, only your subclass has that.
//change this
JFrame frame = new ProgressBarDemo();
//to this
ProgressBarDemo frame = new ProgressBarDemo();

EXCH2013: How to leave messages at ISP server?

Using Exchange 2013 SP1 and it serves both roles. It is not in deployment yet as we are still testing. Currently we have a problem trying to receive mail (have not been able to since testing started) and we got to thinking we need a contingency plan should
Exchange stop receiving mail for a period of time so that users could go to the ISP's webmail interface to see their mail. Plus, once we get the receive working we still want to have this "backup" to compare to for some period of time.
We use SMTP to send and receive mail using the default connectors. Is there a setting to allow messages to remain at our ISP's server after they are brought into the mailboxes?
Or is this controlled at the ISP?
Thank you!

Hi,
For the ISP server, I suggest contact your ISP Support to double confirm whether this goal can be achieved.
According to your description, I notice that you are suffering "Can't Receive" issue with the new Exchange server 2013 SP1. Please correct me if I have anything misunderstand.
Suggestions:
1. How is the impact, can't receive internally/externally or both? All external domains or some specific domains?
2. Please make sure the DNS can be solved.
3. Please make sure Port 25 is available.
4. Please double confirm the Receive Connector settings. More details to refer:
Receive Connectors
http://technet.microsoft.com/en-us/library/aa996395(v=exchg.150).aspx
5. Please check whether the external senders get NDRs, and any related Error/Warning/Information messages in App Log. If yes, please paste the details without sensitive information for the further troubleshooting.
6. Also suggest try to open a new thread on "Can't receive" issue, so that you can get more targeted suggestions.
Thanks
Mavis
Mavis Huang
TechNet Community Support

How deploy my application in isp server how give javaderby backup to isp

hi master
sir i use stuido creator with derby database
sir test this web application in my computer that give me right result
sir how i deploy my this application in isp server,
which file i give to isp that they past in thier server and give me address that i use on net
how i give database to isp how i get backup of java derby and how add new table in java derby
please give me idea
thank's
aamir

I am new at this also, so I don't know if this helps... It is based on what I had experienced with...
There should be a "webapps" directory in any tomcat installation, I don't think it matters if it is a Linux server or NT server or a local box.
We put the WAR file inside the webapps directory, and I believed we had to restart the Tomcat service for tomcat to "recognize" the change and then automatically "expand" the war file. Accessing it from the Web will not cause the WAR file to expand... I think :D I don't think your "web hosting" company would have given you "admin" right to restart tomcat unless he/she is a good friend of yours; so you might have to ask them to do it for you... I know it sounds stupid, but I also think that tomcat need to connect with another server such as Apache, so Apache need to be running also (or some Web server that can deal connect to Tomcat); do you know what web server is running on this web hosting? I would assume Apache, but I am always paranoid about these things:D
Anyway, that's as much as I know about the subject...

Token-based server access validation failed with an infrastructure error

Hi
We have a new Win 2008 Enterprise x64 server running SQL 2008
When we try to connect to the server using Windows Authentication, from a user account which is a domain administrator, we get the following message:
"Token-based server access validation failed with an infrastructure error"
What needs to be configured here for this to work ?
Thanks
Bruce

Hi,
I am encountering the same error message but it is more around the login, this problem happens only on one server but it is fine on another three, my investigation show it is a ghost SID associated with AD user account
Background
    1- An Active Directory (AD) account was created for a user [Domain\UserA]
    2- A SQL login was created for the account above and then granted access to a number of databases
    3- The AD account was renamed/modified to [Domain\UserB]
    At this stage the user would encounter an error when connecting to the server
    The sql log show this error message
    Error: 18456, Severity: 14, State: 11.
    Message
    Login failed for user 'domain\user'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors.     [CLIENT: xxx]
Action on Server 1 SQL (the one with the problem)
    1- Dropped the user from the databases
    2- Re-Created the login from the windows account [Domain\UserB]
    3- Created the user in the respective databases
    But the user still unable to connect to the server
Investigation
    On server 1, the SID of the user in SYSUSERS was Matching SYSLOGINS and matches with result of SUSER_SID(Domain\UserA)
    But it does not match the SID in the AD
    The rest of the servers all have the correct SIDs
    When I use SUSER_SNAME(Incorrect-Sid) and SUSER_SNAME(Correct-Sid) on this server they both return [Domain\UserB]
    The problematic server is always returning the incorrect SID when recreating the user login and when using SUSER_SID(Domain\UserA) as if it is cached somewhere.
I can't specify the SID when creating the SQL login because it is using the Windows account
Your ideas on how to fix this problem are much appreciated
Regards,
DGL

Unable to download Error getting License. License Server Communication Problem: E_ACT_NOT_READY. Cannot open ebooks on my Adobe DE. How do I fix this?

Unable to download Error getting License. License Server Communication Problem: E_ACT_NOT_READY. Cannot open ebooks on my Adobe DE. How do I fix this?

I had the exact same problem & this worked for me. All I needed was the first step. Good luck!!!! (copied from another thread):
"Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help, and indeed installation can even trigger this state.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
Another is "E_AUTH_NOT_READY"
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0

TFS 2013: Access problem when adding a AD group to members

Hi there!
I have a big access problem. It seems I cant log into TFS if I add a AD group to a collection but I can log in if I add single users from the same group.
EDIT: The group I want to add is from another domain. Maybe thats the reason for the problem?
Any ideas? I dont want to add 150 users one by one ;)

Hi John
I will try to answer your questions :)
There’s two domains, TFSdomain and Userdomain, right? - Yes
The TFSdomain one way trust to Userdomain? - Yes
If you add a single account(Userdomain) into your TFS Server, this single account(Userdomain) can connect to TFS Web Access or your account can connect to TFS Web Access? Your account and this single account(Userdomain) are not the same account? -
I have two accounts, one User domain accout and one TFS domain account that is TFS administrator. If I use the TFS domain account to add the User domain account as a project group member this user domain account will be able to access the TFS web access
from the user domain.
If you add an AD group(Userdomain) into your TFS Server, the user in this AD group(Userdomain) will cannot access TFS Web Access or your account cannot access TFS Web Access? Your account and this user are the same account? Or your account included in this
AD group(Userdomain) too? - The user domain:s "domain users" group includes my user domain account. If I add the user domain:s "domain users" group as a project group member in TFS (with my domain user) my user domain account will
not be able to access the TFS web access from the user domain.
When connect to TFS Web Access failed, what’s the error message you received? - There is no error message, I am only asked to log in again.
If you cannot access TFS Web Access, how did you add AD group(Userdomain) into your TFS Server? Or once you added the AD group(Userdomain) into TFS Server, you will cannot access TFS Web Access immediately? Your account is a Userdomain user? -
I added it with my TFS user domain administer account
The scenario is as follows:
I have a one way trust from tfs domain to user domain.
I add a user domain account as a project group member in TFS. Now this account is granted access to the project using the TFS web access client.
I remove the user again.
I add the users domain:s "domain users" group (where my user domain account is included) as a project group member in TFS. Now my user account is
not granted access to the project using the TFS web access client.
Hope this will spread some light on the problem.
Thanks Stefan

I get the following error message "Error getting License. License Server Communication Problem: E_ACT_NOT_READY"

I get the following error message "Error getting License. License Server Communication Problem: E_ACT_NOT_READY"

success. ADE 4.0 is to be avoided. It crashed after my solution.
The solution is trash the activation.dat preference file.
Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.
If you are using 10.7, see Access hidden library files | Mac OS 10.7 and later.
I reinstalled ADE 3.0 and life is good.
The Error getting License. License Server Communication Problem: E_ACT_NOT_READY
on yosemite was bogus.

Isp server access problem in WRT120N

Similar Messages

Maybe you are looking for