Isqlplus with oracle 8.1.7 on Solaris 9x86

I installed oracle 8.1.7 on Solaris 9x86, all is fine.
But I dont see any where that I could use isqlplus through nestcape.
Is there any way that I could start isqlplus through my browser.
Please help!!!

You mean that I can install isqlplus from oracle9i into my oracle8.1.7.You would need to install into a new Oracle9i-only directory (i.e. a
new ORACLE_HOME). The iSQL*Plus in it would be able to connect to
your existing 8.1.7 database using Oracle Net.
Unfortunately I see 9i is not supported on Solaris x86 (though 10g is
"projected".)
The French iSQL*Plus 8.1.7 document you refer to talks about the first
pre-production version of iSQL*Plus released. It cannot be
recommended for use, and is no longer available.
-- CJ

Similar Messages

Petstore 1.3 with Oracle 8.1.7 on Solaris 9 - deployment error

Hello,
I'm trying to get Petstore 1.3 shipped with WebLogic Server 7.0 to work with Oracle
8.1.7 on Solaris 9 with a third-party (Oracle) jdbc driver (classes12). I did
the following:
1) created a new connection pool with the correct Oracle database URL and driver
class name (oracle.jdbc.driver.OracleDriver), also user/password properties for
the Oracle db, and the WL server selected in targets;
2) created a database schema for Oracle based on the data in Pointbase and the
weblogic-cmp-rdbms-jar file as well as petstore_catalog_utf8.sql;
3) created a new tx datasource pointing to the Oracle conn pool;
4) modified the catalog component's ejb-jar.xml file's env-entry to contain CatalogOracleDAOImpl;
5) put weblogic.jar in the classpath;
6) used Java's dbping utility to check connection to the database via the Oracle
driver (works fine--no network adapter error or anything related).
I then rebuilt the ear files (build is successful), but when deploying get the
following error:
"Cannot deploy EJB AccountEJB from customerEjb.jar. Cannot find datasource for
JNDI datasource-petstorePool" and says to make sure the JNDI name and deployment
descriptors are correct (I checked the customer component's deployment descriptors
against the tx datasources' JNDI and they match).
What step(s) am I missing? Any suggestions on what else I need to modify would
be very much appreciated.
Thanks,
Beverly Claire

Beverly:
If you have 8.1, then you should be able to simply and easily create a
connection pool to petstore via the console.
The current error you encountering: "petstorePool does not exist" is
because either:
petstorePool is not defined or there was a failure when the pool was first
created trying to connect to the DBMS.
The full errror should be in the log file prior to the TXDatasource error.
Cheers
mbg
"Beverly Claire" <[email protected]> wrote in message
news:[email protected]...
>
Hello Rob,
Thanks for your reply. Yes, the tx datasource's JNDI name isdatasource-petstorePool.
The server log says that "petstorePool does not exist".
My conn pool contents:
Name: petstorePool
URL: jdbc:oracle:thin:@<replaced with db address>:<replaced with dbport>:<replaced
with db SID>
Driver Class Name: oracle.jdbc.driver.OracleDriver
Properties: user=<replaced with username*>
password=<replaced with password*>
*same username and password used to set up the Petstore tables in Oracledb.
>
My tx datasource contents:
Name: PetstoreDataSource
JNDI: datasource-petstorePool
Pool Name: petstorePool
No, actually we're not evaluating in the sense of just-trying-things-out.One
of our clients is considering an application server. They're relying on usfor
help in choosing which would be best. As of now, we are comparing BEA WLServer
7 and 8.1, Sun ONE Application Server 7 EE, Oracle 9i Application Server,and
Fujitsu Interstage v5 Application Server. For cluster testing andperformance
comparison purposes, we'd like to use the same J2EE Application across allservers,
and the obvious choice is Petstore 1.3. One aim is to smoothly connect toan Oracle
database. The other app servers provide setup scripts and databaseschemas for
Petstore-with-Oracle, so db conn and deployment are not a problem at all.As for
WL, we've been trying to get Petstore (both the version downloaded fromSun's
Java Blueprints and the version that shipped with WL 7) to work withOracle, but
no luck so far. It's getting a bit frustrating, given the ease with whichthings
worked out with the other app servers.
Yes, I've tried out Avitek MedRec for WL 8.1, and this time BEA has kindlymade
provisions for Oracle db, so connection to Oracle is not a problem. I'mhoping
BEA will come around to doing the same thing for Petstore, although I'mguessing
that won't be in the near future.
Any other suggestions would be much appreciated.
Thanks,
Bevery Claire

Isqlplus with oracle 11g

Sir,
I m having a problem with oracle 11g. I m having oracle 9i working is good with oracle 9i but from my installation of oracle 11g i cant find the url of isqlplus. can I work with browser in 11g or not for queries.

Hello,
can I work with browser in 11g When you install Oracle 11g you have also APEX (this is a new feature) which is an Application to develop and deploy Web Interface:
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b32258/start.htm#BEHFIBJD
http://www.oracle.com/technetwork/developer-tools/apex/overview/index.html
More over, from the URL of the EM Database Controle Home page you have a Link to open a SQL Worksheet.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Oct 10, 2010 3:38 PM

Protocol Error, WL 5.10 Sp10 with Oracle 8.1.7 on Solaris 8

When i start the weblogic server the server can't make a connection Pool to the
oracle 8.1.7 dbms. When i try with the same configuration to connect to an oracle
8.1.5 dbms the server create an connection pool.
The errornessage is following text
java.sql.SQLException: Protocol violation
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.sql.SQLException.<init>(SQLException.java:82)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:639)
at oracle.jdbc.ttc7.O3log.receive2nd(Compiled Code)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:218)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:156)
at oracle.jdbc.driver.OracleDrweblogic.jdbc.connectionPool.dpwnPool=\
url=jdbc:oracle:thin:@DB:dpwn,\
driver=oracle.jdbc.driver.OracleDriver,\
initialCapacity=5,\
maxCapacity=100,\
allowShrinking=true,\
shrinkPeriodMins=15,\
testTable=dpwn_test,\
refreshTestMinutes=1,\
testConnsOnReserve=true,\
props=user=*****;password=*****
iver.getConnectionInstance(OracleDriver.java:231)
the oracledriver in the weblogic.properties
I don't now what else i can try to make an connection pool

You mean that I can install isqlplus from oracle9i into my oracle8.1.7.You would need to install into a new Oracle9i-only directory (i.e. a
new ORACLE_HOME). The iSQL*Plus in it would be able to connect to
your existing 8.1.7 database using Oracle Net.
Unfortunately I see 9i is not supported on Solaris x86 (though 10g is
"projected".)
The French iSQL*Plus 8.1.7 document you refer to talks about the first
pre-production version of iSQL*Plus released. It cannot be
recommended for use, and is no longer available.
-- CJ

On Sun fire v490 - Solaris 10 with Oracle 8.1.7.4 & Sybase 12.0

Hi,
We are going to upgrade our server with this configuration -
Sun Fire V490     2 x 1.05 GHz UltraSPARC IV CPU
8096MB RAM     2 x73GB local disk
2x FC 2GB Sun/QLogic HBAs
DAT72
On one machine we will have Sun Solaris v10 with
Oracle DB v8.1.7.4 & Second one will be Sun Solaris v10 with Sybase DB v12.0.0.6.
Now our question is - Sun fire have Hyper-thread CPUs �� will the O/S and databases (Oracle and Sybase) view the proposed system as a true 4 CPU platform? Will parameters used to tune the database such as Sybase max online engines still operate in the same manner as before?
Our old machine configuration was - Sun E450     4x400MHz CPU     1024MB RAM     2 x18; 8x36GB disks

Questions on Oracle and Sybase should be directed to a database forum, this forum is for Sun hardware support.
Here is a link to a DB forum I look at from time to time:
http://www.dbforums.com/index.php
The topic of tuning Oracle or Solaris is way beyond the scope of this forum, I have attempted to go into it before but didn't get any feedback and I would only like to spend lots of time on it if I was being paid!!! On the memory side, keep in mind that Oracle 9i 64-bit can address a maximum of 2 ^ 64 ( 16777216 TB ) memory, prior to that the DBA had to define memory parameters in init.ora. To be honest the last time I worked with a Oracle 8 database I shut a HP K class server down permanently that had been migrated to Oracle 9i on Solaris by an Oracle consultant and I can't remember all the tuning trick etc.

Which version of Weblogic on Solaris is compatible with Oracle 8.1.7 - Unicode?

Hi folks,
We want upgrade WLS 4.5.1 to one of the last version of WLS, but also we are
planing upgrade Oracle to 8.1.7 version and migrate the character set of the
database to UTF8 (Unicode),
so we need to know which versions of WLS are compatible with Oracle 8.1.7
and Unicode as Character Set.
Thanks in advance.
Moises Moreno.

Hi Moises Moreno
The latest version of weblogic server is 6.1 with service pack 1. This version
supports oracle 8.1.7 on major unix platforms viz., solaris(2.6,2.7,2.8),
hp-unix(11.0,11.0i), linux7.1, Aix4.3.3 and on windows platforms viz.,
NTwithsp5, 2000.
BEA jdrivers are having Multibyte character set support (UTF8).
Note : Weblogic server 5.1 with SP10 also supports oracle 8.1.7.
FMI : http://www.weblogic.com/platforms/index.html#jdbc
Thanks & Regards
BEA Customer Support
Moises Moreno wrote:
Hi folks,
We want upgrade WLS 4.5.1 to one of the last version of WLS, but also we are
planing upgrade Oracle to 8.1.7 version and migrate the character set of the
database to UTF8 (Unicode),
so we need to know which versions of WLS are compatible with Oracle 8.1.7
and Unicode as Character Set.
Thanks in advance.
Moises Moreno.

Install oracle 9.2.0 with SAP 4.6C SR2 in Solaris 10

Hi, I'm hopeless with the installation of SAP.
I'm going to try to explain oneself.
I'm installing a SAP 4.6 C with Oracle 9.2.0 and under Solaris 10.
After I've installed Oracle and checked its available, I continue with the installation of SAP, and I have a problem in the step DBCREATEDB_IND_ORA :
DBCREATEDB_IND_ORA
IMAGE: http://s2.subirimagenes.com/otros/previo/thump_4162989clipimage002.jpg
In advance thank you.

hello, I have been following your advices and I have made the installation from the beginning and I have an error iin the penultimate step of the installation (RFCRADDBDIF_IND_IND) and I don't find any solution:
WARNING 2010-03-18 17:46:37 RFCRADDBDIF_IND_IND CRfcOpen:0
    RfcOpen() failed, trying again in 60 seconds.
Creating Database-Specific Objects with RFC
To ensure correct SAP System operation, the program RADDBDIF must be started
in the SAP System after the database load. The program generates
database-specific objects.
This step starts RADDBDIF wih a remote function call (RFC) to the SAP System
as the user DDIC.
When executing the remote function call, the SAP System User DDIC tries to log
on with the default password.
This will fail if DDIC's password has been changed. In this case you have to
provide the actual password of DDIC.
Please enter the password. >
I've tried with 19920607 and I can't continue:
ERROR 2010-03-18 17:59:04 InstController Action:0
    Step RFCRADDBDIF_IND_IND could not be performed.
ERROR 2010-03-18 17:59:07 Main
    Installation failed.
ERROR 2010-03-18 17:59:07 Main
    Installation aborted.
Any idea?

Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0

Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi

Hi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho

Upgrade to Solaris 8 with Oracle 8.0.6

Hi forum,
on a Sparc-Server with Oracle 8.0.6 we want to upgrade from Solaris 7 to Solaris 8. Do we need to upgrade Oracle first or is Oracle 8.0.6 supportet on Solaris 8 ?
Thanks
Hans-Peter

> Our organisation has been running SAP R/3 4.6C on Solaris 8 with Oracle 8i database. We are considering an upgrade to SAP ECC 6.0.
Oh.. you're aware of the fact, that Oracle 8 as well as Solaris 8 is out of support?
I would do it like (if you need/want to stay on the same hardware):
- upgrade Oracle 8 (I hope your run 8.1.7.4) to Oracle 9.2.0.8
- upgrade Solaris 8 to Solaris 10
- upgrade Oracle 9.2.0.8 to Oracle 10.2.0.4 + latest interim patches
- use kernel 46D_EX2
- upgrade the 4.6c to ERP 6.0
Be aware, that, if you plan to use Java applications (such as the Enterprise Portal or other Netweaer related appliation), the ERP 6.0 must be converted to Unicode.
Markus

Solaris Cluster 3.2 with Oracle 11i R2 oracle agent installation question

Hi all!
I'm new in clustering and trying to build a two-node cluster in my lab. At the moment i've successfully installed cluster software and oracle on the nodes and now i'm trying to integrate cluster with oracle DB. Unfortunately, i couldn't find the documentation about this task. Can anyone give me an URL, where to look? By the way: i tried to find something here: http://docs.sun.com/app/docs/doc/820-7360/fxjbo?a=view but found info only about Oracle RAC and nothing else, but i'm trying to build cluster without RAC - just only with solaris cluster.

Hi,
You might run into trouble with 11gR2 right now. You need to wait until the nxt patch for th eHA Oracle agent is avialble, or use 11gR1 at the moment.
Sorry for the bad news.
Detlef

Upgrading from solaris 9 to 10, with oracle installed

Hi
Friends i have salaries 9 on the my machine with oracle and web server configured,
Now i want to upgrade to solaris 10, any effect to oracle,
Cheer's
Rajendra Prasad

It should work. You can use live upgrade method but needed some space. If upgrade fails ( should not be ) you can always revert back to original setup.
But be ready for installation of same version of Oracle , if needed. No need to say backup is must for OS and Oracle.
You should well aware SMF before upgrdation.
Mahendra Rajgude

Want to install BI 7.0 on existing portal system with oracle Solaris 10

Hi gurus
I want to install (BI 7.0, solaris10, oracle) system on existing portal system with oracle and solaris 10 OS....
kindly let me know the how to add and create the project in already existing system for new BI system...is there any specific or need to care ful to install one more system on the same instance..
Thanks in advance

Hi balaji,
If you portal version is 7 then proceed as follows.
BI 7.0 required ABAP and Java engine.
You can install the ABAP part alone and then use the existing portal that you have currently for BI also.
Apply the BI-JAVA related support packs in the portal.
Establish the connectivity between BI-EP as it is required for BEx Web application.
For establishing the connectivity refer
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00c4742a-3a4b-2b10-b4ae-b03d08bcde6e
Use this following link for reference for further reference.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/004e5f27-374b-2b10-4da9-894986fd04c7
regards,
chandru.

Sun Solaris with Oracle 8i &java 1.3

i am going to work on Sun solaris with Oracle 8i
in Java platform
is there any major issue to this combination
pls , help me out to -> [email protected]
Thanks in advance
oviya

I've been able to get Apache_1.3.(9|11|12)+PHP-(3.0.1[45]|4.0b4pl1)+Oracle-8.1.5.0.2 to work (OCI8 API calls) but with much difficulty.
Compiling was pretty straightforward. I used APXS to load the PHP module. However, when I start Apache with the PHP modules loaded and added, Apache would die (no hints, etc.) What I did was start Apache without PHP loaded, reconfigure in PHP once Apache started and THEN restart apache. This works for me. Kinda tedious, though. And the time when Apache is running without support for PHP would allow anyone to see my PHP code with my database password.
(Incidentally, how should I configure Apache so it doesn't serve files which end in .php[3] unless it was through the PHP module?)
I've emailed the Apache OCI8 module developers about it (Stig and Thies) so I hope it'll be resolved soon.

Installation BOBJ XI 3 on UNIX ( Sun Solaris ) with Oracle database

Hi All,
I want to deploy and install BOBJ XI Enterprise 3.1 on Sun Solaris with oracle database.
My question is, do we need to add some oracle licenses stuff in BOBJ XI Enterprise server or we just using a connection from Sun Solaris to oracle database ?
Pls Advise,
Rgds,
Denny

Hi Denny,
the risk is the same whatever DB server you are using. Once you have a setup where more than one application access the server, overload caused by one application can influence the performance of the other ones. You have to check if your DB vendor offers tools to monitor and limit the load on your DB server. But we are talking hypothetically now. I would recommend to check what's the actual load on your oracle DB server. If the server is not working at the limit (let's over 80% all the time), then I think that you can try to install BOBJ also in an existing oracle instance on the oracle server. You can reduce the risk and make the maintenance easier if you setup a dedicated oracle instance on your DB server just for the BOBJ repository.
Regards,
Stratos

Ifsmgr on solaris 2.6 errors with oracle.ifs...IfsApp

When I attempt to start ifsmgr I get the following error.
oracle.ifs.clients.admintool.client.IfsApp
Did I miss anything during the installation process?
-Krish

Hello:
I have the same problem with an only Adaptec AHA-2940, but it is bigger....i can't install Solaris with this problem.
I am sure that it isn't hardware problem becouse i have 3 IBM PC Servers 315 and i have the same problem with all them.
Some help would be very grateful.
Hello,
I have an intel box running Solaris 2.6 with Oracle
8.i.
There are 2 SCSI cards. The first one has the
following devices. [0 = Seagate 9.5gig drive] [4 =
Seagate tape drive] [6 = TEAC cdrom] [7 = adaptec 2940
SCSI card].
The Second has the following devices. [0 = Seagate
9.5gig drive] [1 = Seagate 9.5gig drive] [7 = Adaptec
2040 SCSI card].
Solaris is partitioned as followed. 1 root drive. 1
/opt drive. And 1 /backup drive.
My problem is periodically we get Transport errors.
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4 (adp1):
Dec 2 08:15:45 HAFC unix: timeout: abort
request, target=1 lun=0
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4 (adp1):
Dec 2 08:15:45 HAFC unix: timeout: abort device,
target=1 lun=0
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4 (adp1):
Dec 2 08:15:45 HAFC unix: timeout: reset target,
target=1 lun=0
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4 (adp1):
Dec 2 08:15:45 HAFC unix: timeout: early
timeout, target=1 lun=0
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4/cmdk@1,0 (Disk8):
Dec 2 08:15:45 HAFC unix: SCSI transport failed:
reason 'incomplete': retrying command
Like this. When they come it is by the thousands.
Sometimes locking up the system. Many times the errors
indicate a disk and give a block error or two. If I
replace the disk. The problem usually goes away.
Sometimes replacing the cable clears the problem.
Sometimes this happens when there is no real activity
on the server. I have applied patch 111031-01 witch
was supposed to fix this problem. But it hasnt. Unless
I have bad hardware. Is it possible?

Isqlplus with oracle 8.1.7 on Solaris 9x86

Similar Messages

Maybe you are looking for