Issue at Clearing
Hi Guys
I am trying to clear a customer using F-32 and I keep getting the below error:
The entry 0004 is missing in table T052
I went to the Customer master and checked the payment term and verified that it exists in OBB8 - and it does.
So what can i be missing?
Thank you
Rukshana
Hi
Check this
Error F5100 for table T052
Thank You,
Similar Messages
-
Hi,
I have a issue in clearing this vendor it says "Exchange rate accounts are incomplete for account 240040 currency USD" where i can do the necessary changes.please guide the path.
GKPHi,
Check <b>'Exchange rate difference key</b>' for that GL account in control data tab.
you should tell the system that USD price difference goes to which GL acccount.
Best Regards
Ashsih Jain -
Bill Accounting issue frieght clearing provision account is not getting
Hello Experts
Subjcet: Bill Accounting issue frieght clearing provision account is not getting cleared at the time of accounting.
Error in ZIVA for invoice parking and ZIVB for invoice posting
my user tying to post the invoice through ZIVB with reference of PO number . So at the time of posting this transaction he is getting error like Balance not zero: 651.25 debits: 1,378.75 credits: 2,030.00
that difference amount stands for freight clearing - 651.25
Before that he was posted to ZIVA for Invoice parking with reference of PO
Can any body give me suggestion on the same
Thanks and Regards
vamsiThanks for all
my problem was resolved
regards
vamsi -
I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.
You can send it in to them: https://expresslane.apple.com/GetproductgroupList.action?PRKEYS=PF3
-
Issue while clearing open items with a payment advice
I have created a payment advice to clear open items on a customer. As part of testing, I have created 2 items in the payment advice. Both are short payments for the open items.
In the first line item, I am short paying an open item by entering the reference number. (XBLNR) in AVIP-XBLNR.
In the second line item, I am short paying an open item by entering the assignment number. ZUONR in AVIP-ZUONR.
I am using F-28 for my clearing. I have noticed a very strange issue where in the program will place the residual amount in the residual amount column against the appropriate line item for the first item. Where as for the second item, it does recognize the open item and brings it in the clearing screen but does not put the residual amount in the residual amount column. Due to this, the new line item in the clearing document does not have a link to its original line item.
This has started happening all of a sudden. I am unsure what might have caused this. Please let me know if you need additional information.
ThanksInclude - MF05BFO0
FORM op_pruefen
Context:
WHEN 'K'.
ENHANCEMENT-POINT mf05bfo0_02 SPOTS es_sapmf05b.
Create an enhancement here and add this code
IF SY-TCODE = 'FB1K'.
T041A-AUGLV = 'AUSGZAHL'.
ENDIF. -
Issue while clearing open line items
Hi team,
While clearing open line items for vendors, customers, and GL's system is posting new line items. It should post without new line items. Example
Customer is having debit and credit line items with same amount i am going to clearing manually thru f-32 here sytem is posting new document with new line items. It should post without line items. I have selected Negetive postings permited check box in OBY6. I have not selected check box in document types. Do i need to change in document type also or i missed anything in settings pls help me to overcome this issue.
Regards,
Nagaraju.Dear:
The option to create a clearing document WITH or WITHOUT line items depend on the fields of the structure KONTAB_1ST if all the fields are equal in the documents the clearing document will be generated and posted without line items
Please check OSS note 95077. Check the settings in
IMG >Financial Accounting (New) >General Ledger Accounting (New) >
Business Transactions >Document Splitting >Activate Document Splitting
Check the following link for the same
F.13 clearing Document contains Lineitems
Regards -
Issue with clearing internal table
Hi Gurus,
I am working on an issue, where when we run a std. report we see social number of the employee on the output screen, when I debugged the program I found that there are 2 internal tables where we are putting this SSN. I tried to clear the SSN at the both the places like:
loop at it_table.
clear it_table-SSN.
Endloop.
but still when I ran the report I am seeing social there. so can you please give me any idea of what I am doing wrong?
Thanks,
Rajeev GuptaHi rajeev,
even after ur clearing if the field is still populating it means again its filling the particular field in the later place.
1) keep ur code and while debuging just click on watchpoint and give ur field name go with f8 it will take u to the place the field is filling..
2) below that place clear that field and modify the table.. -
Issue with clearing the Differences in 999 storage type in HU managed S.Loc
Hi Experts,
We are trying to writeoff the differences stocks which are there in 999 storage type, but getting an error message 'Quantity difference document line item for HU's' with Message class L6 & Message number 606. Any idea how this can be resolved?
I can see that for this product/batch combination there is another HU in packing area 923 which is acting as a SU because the item level details are deleted for this HU. Could this be the issue for the errror? Would need some pointers to clear this stocks.
Thanks,
HarishThe item details of the HU seems to be have deleted, causing the difference between HU, IM/WM stocks. We have deleted the HU using HUMO & then the HU difference quantity was posted using HUDIFF.
Thanks,
Harish -
Issue with clearing previous record while uploading through LSMW
Hi friends,
I have created lsmw for hiring action using transaction PA40. i have a tab delimited flat file, when i run the lsmw script the first record is uploaded perfectly. However the upload halts for the second record, coz the previous record still remanins, is there an issue with the recording or do i need to clear anything?. How do i resolve this one and continue uploading other records.
Regards,
QuaviHi Friend,
In the LSMW, Under the User menu you have Display Read Program and Display Conversion Program select this and open the respective program you feel having problem and put a break point in the Loop statement and debug. I will help you to identify the problem to resolve.
Rgds,
Jey -
End Planning Run After Order Selection - issue not clearing down all plans
Hi,
We are using the CTM Profile with "End Planning Run After Order Selection" ticked in the basic settings tab in order to clear down previous CTM runs. So we have a CTM deletion profile.
The issue is that it requires more than one execution to clear down the Planned Orders / Purchase Requisitions. You execute the Deletion CTM Profile once and it will clear down some of the Purchase Requisitions and Planned Orders and leave some still in place. You then have to execute the deletion CTM profile one or two more times in order to delete the remaining Planned Orders / Purchase Requisitions.
This is clearly not realiable for a batch process to clear down plans. Has anyone else experienced this and does anyone have a solution. The solution cannot be based on RLCDELETE or /SAPAPO/DELETE_PP_ORDER
MarkHi,
Can you check your planning mode and deletion mode combination defined in the ctm profile.
Prerequisties for deleting the orders:
u2022 They are within the planning and deletion periods
u2022 They do not have pegging relationships with demands outside of the planning period
They lie outside of the production horizon, stock transfer horizon and the planned delivery time
In addition, all location products of an order must be included in the Master Data Selection so that CTM can
delete the order. Also, CTM cannot delete any manually fixed orders.
If you have selected the SNP Order order type in the CTM profile, CTM cannot delete any PP/DS orders. This
restriction is also valid the other way round for the PP/DS Order order type. If you select this order type, CTM also
deletes SNP orders.
Thanks,
nandha -
I Pad Air, I OS 8, just download several days. having issues with; screen reerts to a previous screen without input. 2 On Google Earth cannot get street view in "some instances", Okay on regular computer. 3. Unable to clear off screen, which causes problems trying to get to diferent website.
Whenever I say I "Rebooted" I always did a shut down/start up. Not a restart.
What you said works as a temporary fix, but I don't want to keep doing it because:
1) The drive makes a noise when the computer is shut down indicating the drive was disconnected improperly.
2) I don't want to shut my computer off after every use, nor do I only want to back up my computer once every few days. -
Issues in Clearing for Electronic Bank statement
Hello friends
Can somebody help me with my Issue.
We have a Main Bank Account 220000 and Bank Clearing Account 220001. Ther is a advance payment account 139000. Now we make payment using 139000. Entry pass is
139000 DR
220001 CR. This line item has a field text which is populated by word ADV
now when i process bank statement using t-code ff.5 entry pass by system is
220000 CR - Main Bank Account
220001 DR - Bank Clearing account. Note to payee field ahs this word ADV in the bank statement.
now i want system to clear entries in account 220001 which has a word ADv in common... how can i achieve this...
Thanks
SanjeevHello All
We have a report which has all its rows with explode function. Normally the report will look like this
Accounts Rec total
4000
5000
6000.. etc
Someone has changes some thing and the same reports is displayed ina diff format
Accounts Rec total
4000, 5000, 6000
Can someone help me to know what triggers this horizontal display
thanks
Sanjeev -
Issue with Clear widget and spotlight search.
Why does the widget from Clear not work? All it does is show quotes from people. Why does it not show my list? (I assume that that is what it is supposed to do).
Also, every time I go into settings>general>Spotlight search, and try to turn on Spotlight Suggestions and Bing Web Results, they turn them selves off as soon as I leav that screen. How can I get them to stay on?Hi,
For metadata, which metadata are you not seeing? Are they custom properties within the PDF, and have you checked if you have crawled properties matching these?
I know there's issue with last modified on PDF's (http://sharepointfieldnotes.blogspot.no/2013/05/understanding-and-getting-sharepoint.html)
Thanks,
Mikael Svenson
Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
http://techmikael.blogspot.com/
Author of Working with FAST Search Server 2010 for SharePoint -
Hi All,
My program displays an idoc list(screen 100). Then if user selects any row in the method
gets the index no and details of that idoc are displayed in another screen(screen 200) .
Then control returns to this screen again. Now if user selects any row from idoc list (screen 100) then data is displayed along with data from previous screen .
In PBO of screen 200 : some code is :
create object go_docking
exporting
dynnr = '200'
extension = 65
side = cl_gui_docking_container=>dock_at_top.
create object go_grid_detail
exporting
i_parent = go_docking.
some code
create object go_custom_cont
exporting
container_name = 'DISPLAY_IDOC_CONTENT_200'.
create object go_grid_detail
exporting
i_parent = go_custom_cont.
some more code
call method go_grid_detail->set_table_for_first_display
exporting
is_layout = gs_layout
it_toolbar_excluding = lt_exclude
changing
it_fieldcatalog = fieldcatalog1
create object go_docking
exporting
dynnr = '200'
extension = 65
side = cl_gui_docking_container=>dock_at_bottom.
create object go_grid_detail
exporting
i_parent = go_docking.
In PAI of 200 screen i have used :
some code
free go_grid_detail.
free go_custom_cont.
go_docking->free( ). free go_docking.
After freeing all data and on call of screen 200 from screen 100 still it shows data from which was there previously on screen 200.
How can clear all previous data . Even i have free the docking still not working .
Kindly please help.Hi,
if go_grid_detail is type ref to cl_gui_alv_grid, call go_grid_detail->free( ) before container->free( ).
Regards,
Clemens -
Issue in clearing workflow notification
Hi,
Oracle EBS:11.5.10.2
OS: AIX 5.3
after resolving the workflow issue i had a stopped queue of of around 5000 mails.
to purge that queue I followed the oracle Action plan.
1. Stop Workflow Agent Listeners and Mailers
2. Find the tablespace where indexes on corrid for queue tables are created :
select distinct tablespace_name
from dba_indexes,dba_queues
where index_name like 'WF%N1'
and table_name=queue_table
and name like 'WF%';
3.
update wf_notifications
set mail_status = 'SENT'
where status in ('OPEN', 'CANCELED')
and mail_status in ('MAIL', 'INVALID')
commit;
4. Rebuild mailer's queue :
sqlplus apps/APPSpw @$FND_TOP/patch/115/sql/wfntfqup APPS APPSpw APPLSYS
when i reuild the queue I am facing with the error:
error faced while running the script(rebuild mailers queue)
PL/SQL procedure successfully completed.
Elapsed: 00:00:02.67
Commit complete.
Elapsed: 00:00:00.01
PL/SQL procedure successfully completed.
Elapsed: 00:00:03.93
Commit complete.
Elapsed: 00:00:00.00
declare
ERROR at line 1:
ORA-20000: Oracle Error = -942 - ORA-00942: table or view does not exist
ORA-06512: at line 281
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
appldev@ebtstdb on /ebdevdbh/app/ebprdappl/fnd/11.5.0/patch/115/sql #
regards,ERROR at line 1:
ORA-20000: Oracle Error = -942 - ORA-00942: table or view does not exist
ORA-06512: at line 281Please check line 281 of the script to find out what table/view (object) the script is complaining about.
Thanks,
Hussein
Maybe you are looking for
-
I am going to ****.
Well I managed to break my roommates macbook pro screen. We're studying abroad in the netherlands currently, we live in a small room. I tripped over my chair and in an attempt not to fall attempted to grab onto something... I grabbed onto his macbook
-
Quicktime 7.1 will not install
anyone else having this problem? when i try to install the 7.1 update it says "There were errors installing this software. Please try installing again". with all the problems it sounds like people are having with this release, i'm not too unhappy tha
-
Error with BC App Module Passivation
We are seeing an error when BC4J is trying to passivate an application module. It is attempting to persist its state to a databse. It works fine when deployed to the integrated WebLogic instance in JDev, and when deployed to a single standalone WebLo
-
Dear All, I have problem about fscommand. I have 3 modules flash in .swf file. first module is menu frame, program and guide. I create execute file for program.swf and menu.swf, now I have file flash: menu.exe program.exe guide.exe File 'program' and
-
After years of pc _ell! I made the switch. 4 times!!!!. First, I sent my oldest daughter of to school with an iBook G4, then my son a Mac mini, then my youngest daughter a Macbook and today I ordered a loaded iMac for Mom and Dad. In the brief time i