Issue copying Macusers files to external disc

Hello everybody,
My Macbook pro wouldn't turn on. I booted to the installation DVD and installed OS X to the external drive. Once the installation was done, I was able to access my laptop without any problem and I retrieved all my files from the USERS Folder.
I tried to copy my old files to the external disk, before formatting the system’s internal drive and reinstalling OS X. However, at every attempt, I’d get “some data can’t bet read or written (Error Code -36)”. I ran a Verify/Repair Disk Permissions and this is what I got:
Awaiting your feedback.
Thanks

The image you posted looks like you tried repairing permissions on a shared volume and not on your computer. Yet, you said you retrieved your files successfully. In any event the errors reported are not really critical at this time because you need to reformat the hard drive in your MBP before you can restore your saved data.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer.  Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the  "C" key.  Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.)  Click on the Partition tab in the DU main window.  Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer.  Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X.  You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
After installing you can restore your files from the external drive on which you backed them up.

Similar Messages

  • How do I get my itunes to access music files on external disc hooked up to my imac?

    how do I get my itunes to access music files on external disc hooked up to my imac?

    assuming copy to ... when adding to library is checkmarked in preferences > advanced, drag the files from the external into an open iTunes window while holding the option (⌥) key.

  • Can't Copy Large Files To External Drive

    This is driving me nuts. I'm running 10.4.11 with an external Newer Tech Ministack 320GB hard drive that's only ten weeks old. Yesterday I downloaded some large (50mb or so) QuickTime files to my desktop, which is to say my internal drive. I then tried to copy them to my external drive, since that's where I keep my movie files since they take up so much room. One copied over without any trouble, but numerous attempts to copy the others result in the process freezing after anywhere from 1/4 to 3/4 of the data has been copied, or else I get the "error 36" message. My first thought was that the external drive was failing, but I can copy small movie files (10mb or so) back and forth between the two drives with no problem. What's the point of having a large external drive if you can't use it for your large files? Repaired permissions on both drives, no improvement.

    I have repaired permissions and run disk repair on the internal drive as well. Yes, I've played the clips in their entirety, but I'm going to do it again and look for any hiccups. That's an interesting theory and I want to check it out.
    It has occurred to me that a workaround, although it by no means addresses the underlying problem, is to use QuickTime Pro to chop the clips up into several smaller files, copy them to the external drive, and then reassemble them via QuickTime Pro on the external drive.
    FWIW, I neglected to mention (although I don't know if it's pertinent or not) that immediately after installing the external drive ten weeks ago I used SuperDuper to clone my entire internal drive onto the external firewire drive. I then erased the movies from the internal drive, which was bumping up against maximum capacity. I am able to boot from the external drive, and I want to retain this capacity should the internal drive (which is, after all, six and a half years old) fail.

  • Error -36 when trying to copy AVI files from External Drive to Mac

    Hi
    Hoping for some help with a problem I appreciate others have faced.
    I bought a new video camera recently and have just tried to copy the AVI files from the first few videos to my mac but am getting the error code 36 that states the files cannot be read or written.
    The format of the camera is MS-DOS (FAT 32) but when I tried changing it to MAC OS Extended it did something to the camera so the mac could then not recognise it when I tried to re-connect it via the USB port.
    I've been able to copy the files onto my friends Windows laptop no problem so don't believe them to be corrupt.
    Have also tried the dot_clean fix but this didn't work.
    Could there be another reason for the error? Any help or advice would be much appreciated.
    Thanks

    BDAqua wrote:
    I hear 3rd Party, or HW Raid 0/1/5/10 are OK, but 6 months is the absolute most I got out of my many screaming RAID setups before they completely lost it!
    Bummer. I'm not really doing this for speed though, just for total storage volume and constant, worry-free, no-brainer back-up. I guess RIAD in general is something I need to study up on. Would a simple mirror of one 500GB drive to another (back-up) - and do that twice - be a better, more reliable way to go?
    I've used Tri-Backup3/4 for years for Backups, it's fast, automatic, reliable, works in the background if you wish...
    Back-up software always seemed to have some kind of a hiccup to it, but I'll certainly look into Tri-Backup3/4. I used to Retrospect years ago, a rather fussy thing if I recall.
    Now, on the Safe Mode boot - not a success BUT a different result!
    I got the -36 again, but this time it was the external drive FILE that errored, not the OS-resident drive.
    In other words, pre-Safe Mode the error said "...because some data in "ZillaHAL" could not be read or written." (ZillaHAL is my OS-X drive).
    In Safe, it read, "...because some data in "WinXP Pro.vmem" could not be read or written."
    "WinXP Pro.vmem" is the virtual machine file - which basically is a simple Mac volume (folder) containing all of the files to run my XP virtual machine.
    Also, this time, a file* did manage to remain on the external drive whereas before, after the error, no file at all remained.
    * a generic icon appears, but it shows a size of 16+GBs. The actual file is 18.13GB - I did manage to shrink it down the other day (from it's previous 25GB).
    Well, that's it for now. I'll be away for three days, so don't mind me if I cannot reply back for a spell.
    Thanks BD,
    mp

  • Copy large files to external hard drive

    How do I copy files fromone external hard drive to another external hard drive via mac book air

    Gregory Taddeo wrote:
    How do I copy files fromone external hard drive to another external hard drive via mac book air
    If its from one drive TO A BLANK / NEW HD, and its a LOT of files (400+ GB)
    then just use Superduper cloning software to copy it all in one click and sit back and let it work
    free to use
    http://www.shirt-pocket.com/SuperDuper/superduperdescription.html

  • Problems copying large files to external disks

    I have a lot of media and so multiple USB and network based external hard disks.
    I'm having trouble with two in particular that are recent buys. I initially mounted them via a USB hub onto my Time Capsule, but when I had errors, I've now tried mounting them directly to my MacBook Air - and for comparison directly to a Windows laptop.
    And I'm only having problems when it's a Mac doing the copying (MBA to either USB mounted via Time Capsule or directly USB mounted on the MBA).
    The problem is that the drive appears to behave OK for initial copies - but I'm trying to put a set of old movies (captured from a VCR ages ago that I'd recorded off TV) onto one of the drives and (a) it takes ages to copy and (b) eventually I get a write failure. The specific error message is
    The Finder can't complete the operation because some data in "" can't be written. (Error code -36)
    I"ve tried a whole variety of setups - as I've said via Time Capsule and directly mounted. I also wondered if the file system on the drive would make a difference. Out of the box it was formatted with FAT32 and when that failed I've now reformatted with MacOS file system - which I would have thought would give better compatibility (and I've read that FAT32 has a large file size limit - although I think it's 4GB and while I do have one file at 4.04GB, it's not failing the copy on that file).
    I've also connected the drive (when formatted FAT32) to a Windows laptop and (a) it copies faster and (b) it copies successfully.
    Any suggestions for this? Is there some kind of large file (all are >1GB) copy issue with USB mounted devices in OSX?

    As I mentioned in my original post while the disks were originally formatted FAT32 I reformatted then and changed them to Mac OS Extended (Journaled) so that isn't the issue. I still have the problem with the disks using Apple format.
    I've noticed that if I do the copy in pieces, it seems to work. I.e. if I select the full set of 45GB in one copy and paste operation (dragging and dropping using Finder) it fails part way through.
    But if I copy 3/4 movies at a time going back until I have copied all of them then I can get all of them on the disk.
    It suggests to me it's some kind of issue with copying and pasting a very large amount of data in Snow Leopard?

  • Very slow copying of files to external hard drive

    Dear all,
    I've been finding that my MacBook Pro (a 2007 model running Snow Leopard) is extremely slow to copy files over to an external hard drive. The hard drive is connected via Firewire and is perfectly fine with my (Tiger) desktop G5. When I say slow, I mean that the progress monitor is counting in individual bytes.
    Any ideas?
    Thanks in advance,
    Roger

    I've tried again with a different cable and the firewire 400 (which is certainly what I'm using) still proves appallingly slow when I'm trying to copy files from my MacBook to the drive. The other way round (External HD to computer) is just fine.
    Sounds like a hardware problem. In order to troubleshoot it, you'd need to try a different FW HD. If it did the same thing, it would suggest an issue with the MBP's FW port/bus. If it worked fine, then it would suggest an issue with the first FW HD, likely with the circuitry, as has been surmised before (the HD itself may be just fine, and could be transferred into a different enclosure).
    I would try firewire 800, but assume that you can't have a connector which is 800 one end and 400 the other: both HDs are firewire 400 and I want to carry on using them ...
    800 is backwards compatible with 400, so you actually can, but it will operate at the 400 speed; in any case, no reason to mess with that here.
    One of my HDs, a later model, has a USB connector built in. I tried copying from the MacBook to the HD using the USB and it was very fast.
    Sounds like you've narrowed it down to a FW issue, as described above.
    I'm wondering whether this is, as one of the other correspondents surmises, an OSX 6.3 problem ...?
    I strongly doubt it. I'm on 10.6.3 and have done SuperDuper backups/Time Machine backups/large file transfers, and all have behaved just as they did before 10.6.3. I read all the posts that come through here, and there is no widespread issue (normally, when something like that happens, there will be many posts about it; if fact, there are usually many posts after any major update/upgrade, when people believe the update/upgrade has done something to their machines, but I've been surprised at the low number after 10.6.3, at least here in this forum, and 10.6.3 was a very large update).
    Would be very interested to know your informed thoughts.
    Some thoughts:
    -as mentioned above, try a different FW HD on that same MBP port to determine if the port is operating correctly.
    -if the port does function properly, get a new enclosure and install the HD from the FW enclosure (USB enclosures, if you're satisfied with their speed, are very inexpensive, sometimes as low as $10 or so). Check out Macsales, Newegg and Amazon for some ideas/examples, or if you want to see hundreds of them, google it.
    -if the port is the issue, you may want to get used to using USB or get a FW800 HD enclosure. Obviously there is no guarantee the FW800 port/bus is functioning properly, but I think the odds would be good.
    Message was edited by: tjk

  • Copying large files to external hard drive won't work

    I tried looking for this all over google and here, and i could only find old threads that didn't end up with a clear answer, so i decided to post one of my own for the first time.
    Basically, I have folders of music and movies that i'm trying to move over to the external hard drive (2tb WD my book studio using firewire 800) and at one point during the copy, the finder copy window will get stuck and won't move any further. So the copy doesn't go on, and even if i try to cancel it only the beachball starts rolling and finder won't respond until i restart or unplug my external.
    The weird thing is that even when I was copying a few folders that weren't too big, around 2gb or so, it did the same thing. BUT when i took 3 individual avi files that were around 3gb it copied fine.
    I really don't understand what's going on, and I want to just take the entire folder, let it copy, and go do something else rather than sit here moving file after file.
    Does anyone have any idea as to what's happening? I'm not sure whether to blame my imac or my external. external does time machine back ups fine tho.. I have it split into 2 partitions, one for tm and one as a FAT drive. Any help would be great! Thanks!

    All right. So let's say your hard drive is named 'WD MyBook' or something like that.
    Let's also say the folder you're trying to copy is your Documents folder.
    In Terminal, you'd type:
    sudo ditto pathToDocuments pathToWDMyBook
    Now obviously, those are fake paths and don't actually represent where those things are, but that's to illustrate the syntax you need to use.
    Your external drive path will be something like this:
    /Volumes/WD\ MyBook
    The trick here is that if there's a space in the name of the drive, you need to substitute a "\ " for the space. You can also put single quotes around the whole thing like this: '/Volumes/WD MyBook'
    Everything here is case sensitive. You can also drag the icon for the external drive into the Terminal window, and it will paste the path into Terminal for you.
    So the full example would turn out to be:
    sudo ditto /Users/yourusername/Documents /Volumes/WD\ MyBook
    If you wanted to make sure everything went into a specific folder on your external, you'd need to add that to the path you specify. For instance, if you want everything to go into a folder named Backup on your external, the command would then be:
    sudo ditto /Users/yourusername/Documents /Volumes/WD\ MyBook/Backup
    Either way,
    sudo ditto source destination
    That's it, just spaces between everything. Like I said before, you don't need the sudo necessarily, depends what you're copying.
    I don't know if that makes any sense, I'm a little out of it today. Let me know if you need further clarification on any of that, or let me know what you're copying/where it's going and I can probably help you with the syntax. Or just drag and drop! It's easy.

  • Can't copy large files to external hard drive

    I have a 500gb western digital my book home edition with firewire/usb/esata connections. I want to copy some large video files (1gb and higher) to this external drive but I keep getting this message: "sorry, theoperation could not be completed because an unexpected error occured (error code-1309)."
    what is the dealio?

    You have to erase the full drive (not the partition) which is why it is better to click on drive icon, then PARTITION tab, and set to new partition(s).
    Click on OPTIONS.... below and set it to something other than Master Boot Record.
    Click APPLY and then go back and apply the new partition scheme. You can also click SECURITY OPTIONS to zero or do 7-way write erase, but I don't think you actually need to.
    Using Disk Utility to format drives should be in "Disk Utility 101". Even the Help menu in Disk Utility has what you need to format, initialize and use all the features. Use the instructions for how to setup a drive for TimeMachine would be excellent also.
    http://www.apple.com/support/leopard/timemachine/

  • Macbook pro 10.6 Copying larger files to external

    I'm stuck. I am trying to copy MOV and MTS files from one hard drive to another. I keep getting an error message. Here are the facts:
    Macbook Pro
    OS 10.6.8
    Hitachi hard drive 2tb
    Copying MOV and MTS files
    Hitachi has been formatted many times to Mac OS extended (journaled). One time I even tried creating 1 partition with the same.
    I am dragging and dropping the files
    I am able to move smaller files (pdf, doc, ai) up to about 50mb with no problem.
    After a file results in an error it is impossible to copy anything else to the drive no matter how small
    Also, the Hitachi will not eject after and I have to unplug it to get it off line.
    I was able to plug in another drive I have here (different brand) and copy everything I wanted to that but I need another dedicated backup of the files.
    I spent quite a bit of time reading on similar problems and practically everyone has a problem because they are formatted in FAT32. That is not the case here. What am I doing wrong? Is there a way to find out if there is something wrong with this drive?

    kwmlr439 wrote:
    CSOUND Read the title please:
    Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
    The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
    10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
    Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
    Message was edited by: Shootist007
    Message was edited by: Shootist007

  • Finder issues when copying large amount of files to external drive

    When copying large amount of data over firewire 800, finder gives me an error that a file is in use and locks the drive up. I have to force eject. When I reopen the drive, there are a bunch of 0kb files sitting in the directory that did not get copied over. This is happens on multiple drives. I've attached a screen shot of what things look like when I reopen the drive after forcing an eject. Sometime I have to relaunch finder to get back up and running correctly. I've repaired permissions for what it's worth.
    10.6.8, by the way, 2.93 12-core, 48gb of ram, fully up to date. This has been happening for a long time, just now trying to find a solution

    Scott Oliphant wrote:
    iomega, lacie, 500GB, 1TB, etc, seems to be drive independent. I've formatted and started over with several of the drives and same thing. If I copy the files over in smaller chunks (say, 70GB) as opposed to 600GB, the problem does not happen. It's like finder is holding on to some of the info when it puts it's "ghost" on the destination drive before it's copied over and keeping the file locked when it tries to write over it.
    This may be a stretch since I have no experience with iomega and no recent experience with LaCie drives, but the different results if transfers are large or small may be a tip-off.
    I ran into something similar with Seagate GoFlex drives and the problem was heat. Virtually none of these drives are ventilated properly (i.e, no fans and not much, if any, air flow) and with extended use, they get really hot and start to generate errors. Seagate's solution is to shut the drive down when not actually in use, which doesn't always play nice with Macs. Your drives may use a different technique for temperature control, or maybe none at all. Relatively small data transfers will allow the drives to recover; very large transfers won't, and to make things worse, as the drive heats up, the transfer rate will often slow down because of the errors. That can be seen if you leave Activity Monitor open and watch the transfer rate over time (a method which Seagate tech support said was worthless because Activity Monitor was unreliable and GoFlex drives had no heat problem).
    If that's what's wrong, there really isn't any solution except using the smaller chunks of data which you've found works.

  • Error code 36 when copying files to external hard drive!

    I keep getting this error when I try to copy files to my external hard drives. It is the same error no matter what drive I use. It says it cannot perform the operation because the data cannot be written - like there is a permissions problem, but I checked all the files, and there is no permission problems. The file sizes are small .iff and .jpg --- There is not more than 10 characters in the naming, so what is going on? I have folders inside of folders, and it will not copy - but if I go into the folders and copy each file one at a time, by itself, it works. I don't get it? Anybody have any thoughts?

    a very common issue caused by a bug in snow leopard finder when dealing with FAT formatted drives. see this link for details and a fix
    http://discussions.apple.com/thread.jspa?messageID=11122044&#11122044

  • I can't open my iphoto library on an external disk (78 gb ntfs); if i copy the files on the iMac the file is smaller and not usable. how can i recover my photo?

    hi all,
    i'm using the last version of iPhoto and i save my library on a western digital external USB drive; the drive is formatted in NTFS; i usually use tuxera to access and browse the files.
    Unfortunately, i don't know why, i access this drive in read only mode, so iPhoto doesn't accept the library any more; i tried to copy the library on the iMac but the copied file is really smaller (54 gb instead on the 78 on the drive), and iphoto doesn't accept it.
    i need to find a solution and to recover my library, i've no other copies?!
    tuxera doesn't open any other ntfs drive i think the problem is there, but i have to finf other solutions to recover my photos.
    thank you all for any suggestion.

    This problem is entirely due to this:
    the drive is formatted in NTFS
    iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.
    Do you get any error messages when you try and copy the file back to your Mac?
    Do you have a back up?

  • Copying large file sets to external drives hangs copy process

    Hi all,
    Goal: to move large media file libraries for iTunes, iPhoto, and iMovie to external drives. Will move this drive as a media drive for a new iMac 2013. I am attempting to consolidate many old drives over the years and consolidate to newer and larger drives.
    Hardware: moving from a Mac Pro 2010 to variety of USB and other drives for use with a 2013 iMac.  The example below is from the boot drive of the Mac Pro. Today, the target drive was a 3 TB Seagate GoFlex ? USB 3 drive formatted as HFS+ Journaled. All drives are this format. I was using the Seagate drive on both the MacPro USB 2 and the iMac USB 3. I also use a NitroAV Firewire and USB hub to connect 3-4 USB and FW drives to the Mac Pro.
    OS: Mac OS X 10.9.1 on Mac Pro 2010
    Problem: Today--trying to copy large file sets such as iTunes, iPhoto libs, iMovie events from internal Mac drives to external drive(s) will hang the copy process (forever). This seems to mostly happen with very large batches of files: for example, an entire folder of iMovie events, the iTunes library; the iPhoto library. Symptom is that the process starts and then hangs at a variety of different points, never completing the copy. Requires a force quit of Finder and then a hard power reboot of the Mac. Recent examples today were (a) a hang at 3 Gb for a 72 Gb iTunes file; (b) hang at 13 Gb for same 72 Gb iTunes file; (c) hang at 61 Gb for a 290 Gb iPhoto file. In the past, I have had similar drive-copying issues from a variety of USB 2, USB 3 and FW drives (old and new) mostly on the Mac Pro 2010. The libraries and programs seem to run fine with no errors. Small folder copying is rarely an issue. Drives are not making weird noises. Drives were checked for permissions and repairs. Early trip to Genius Bar did not find any hardware issues on the internal drives.
    I seem to get these "dropoff" of hard drives unmounting themselves and other drive-copy hangs more often than I should. These drives seem to be ok much of the time but they do drop off here and there.
    Attempted solutions today: (1) Turned off all networking on Mac -- Ethernet and WiFi. This appeared to work and allowed the 72 Gb iTunes file to fully copy without an issue. However, on the next several attempts to copy the iPhoto and the hangs returned (at 16 and then 61 Gb) with no additional workarounds. (2) Restart changes the amount of copying per instance but still hangs. (3) Last line of a crash report said "Thunderbolt" but the Mac Pro had no Thunderbolt or Mini Display Port. I did format the Seagate drive on the new iMac that has Thunderbolt. ???
    Related threads were slightly different. Any thoughts or solutions would be appreciated. Better copy software than Apple's Finder? I want the new Mac to be clean and thus did not do data migration. Should I do that only for the iPhoto library? I'm stumped.
    It seems like more and more people will need to large media file sets to external drives as they load up more and more iPhone movies (my thing) and buy new Macs with smaller Flash storage. Why can't the copy process just "skip" the parts of the thing it can't copy and continue the process? Put an X on the photos/movies that didn't make it?
    Thanks -- John

    I'm having a similar problem.  I'm using a MacBook Pro 2012 with a 500GB SSD as the main drive, 1TB internal drive (removed the optical drive), and also tried running from a Sandisk Ultra 64GB Micro SDXC card with the beta version of Mavericks.
    I have a HUGE 1TB Final Cut Pro library that I need to get off my LaCie Thunderbolt drive and moved to a 3TB WD USB 3.0 drive.  Every time I've tried to copy it the process would hang at some point, roughly 20% of the way through, then my MacBook would eventually restart on its own.  No luck getting the file copied.  Now I'm trying to create a disk image using disk utility to get the file from the Thunderbolt drive and saved to the 3TB WD drive. It's been running for half an hour so far and appears that it could take as long a 5 hours to complete.
    Doing the copy via disk image was a shot in the dark and I'm not sure how well it will work if I need to actually use the files again. I'll post my results after I see what's happened.

  • System hangs when copying large quantity of files from external HD

    A little background:
    I was having some problems with the original OS (10.4.1), including periodic freezes. I bought the Mac Box Set '09 and installed Snow Leopard (10.6.5), but ran into some problems and in the process had to reformat my internal hard drive. I backed up all of my photos (~16GB), Documents (~1.5GB) and Music (~50GB) on a WD external hard drive (My Passport 750GB).
    *The problem*: After the 10.6.5 install, the computer works great (no random freezing when I click around in Finder), but I am having trouble copying files back to the internal HD from the external. I can copy up to about 1GB at a time without any problems, but any time I try to copy more than that, the system hangs (first the spinning disk cursor, then it totally freezes) and I have to do a hard reset. I have tried copying a number of different folders (pictures and music), and the same holds true: small folders with a few files copy without a hitch, but any time I try to copy a lot of files at once: freeze city. This problem occurs whether I am using Finder to copy the files or iPhoto/iTunes to import them.
    I have verified both disks using the Disk Utility AND restructured/verified them using DiskWarrior. I also had no problem copying all of my files from My Passport to a second external HD using this MacBook, so I assume the Passport is fine. Is this a physical problem with my internal HD? If so, why can't DiskWarrior or DiskUtility catch it? I just noticed that there is an internal HD recall for this model of macbook, although I have never gotten the question mark on startup that would qualify me for a replacement HD from Apple. Maybe it's a problem with Snow Leopard... I would love to know if anyone has had this problem before or has some advice.
    Thanks,
    Sam

    External USB/FW drives 'falling off' or drives spinning down (going to sleep) and I would assume since you have been running 10.4 that the Passport might be older model, perhaps not the latest firmware, maybe not compatible with Macs and with Snow Leopard.
    Obviously you want FW800 but for some, USB worked where FW fails.
    Hard Reset: do you have another hard drive to boot from to run Disk Warrior? is that updated to 4.2 or later? you never want to run DW from CD. Else, boot from OS X 10.6.5; or Single User and run FSCK. HFS+ doesn't take kindly to hard restarts even though a Safe Boot helps a little, that isn't as good as FSCK or one of the other options.
    Disk Warrior Rebuild is more thorough, but if you hold OPTION while clicking on REBUILD it brings up more choices. And you want to scan the full hard drive.
    Going back to Aug/Sept 2009, there were a lot of threads about external hard drive issues. Wish I could point to a good one.

Maybe you are looking for