Issue: Datacontrol using webservice

Hi Gurus,
I am new to ADF technology. I have created a datacontrol using webservice and using that webservice datacontrol, i have also created a ADF page and it is successfully invoked the webservice.
But for some reason wsdl location has been changed to another server. Now the challenge is to change the wsdl location in datacontrol. I have edit the previous Datacontrol and provide the new webservice wsdl.
but it is not working now means ADF page is unable to invoke the service :(
Is there any other places to change the wsdl location. Any suggestion would be helpful to me.
Thanks in advance
Sharmistha.

Hi,
Check following will useful
http://blogs.oracle.com/shay/entry/updateinsert_with_adf_web_serv
http://docs.oracle.com/cd/B31017_01/core.1013/b28764/web_services003.htm
http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_52/jdtut_11r2_52_6.html

Similar Messages

Dependent combo boxes using webservice

Hi All,
I'm trying to create a depended combo boxes using af:selectOneChoice, using webservice datacontrol. When i try to change the value of the first combo box which has hard coded values (eg. Continent), The depended combo box (eg.Country) is empty. (which is returned via webservice) When i again change the value of the first combo box, I get the corresponding values(Countries) generated. The very first time when a value is selected is not binded to the model. Why is this happening and how to overcome this issue. I tried using the value change listener and assigned the current value to binding but there was no change in the behaviour.

Thanks for your response Frank. The Sample worked fine. But when i try to implement the same i ran into issues.
First, I created a combo box for continents and a managed bean.
<af:selectOneChoice label="Region" id="soc1" autoSubmit="true"
                              valueChangeListener="#{locateBean.setRegion}">
            <af:selectItem label="Asia" value="Asia" id="si3"/>
            <af:selectItem label="Europe" value="Europe" id="si2"/>
            <af:selectItem label="NA" value="NA" id="si1"/>
          </af:selectOneChoice>Then I created a combo box for countries using the webservice data control.
          <af:selectOneChoice value="#{bindings.Country.inputValue}"
                              label="Country"
                              required="#{bindings.Country.hints.mandatory}"
                              shortDesc="#{bindings.Country.hints.tooltip}"
                              id="soc2" partialTriggers="soc1">
            <f:selectItems value="#{bindings.Country.items}" id="si4"/>
          </af:selectOneChoice>In the managed bean as
    public void setRegion(ValueChangeEvent event) {
        this.region = (String)event.getNewValue();
    }1. When i run and select an continent, the values are not getting populated in the country combo box. If i refresh the page or select another value for the continent, then its is getting populated.
2. When i tried to execute the operation manually at pagedef on value change event,
        OperationBinding operBinding = getBindings().getOperationBinding("GetCountryList");
        operBinding.execute();I'm getting an warning as <FacesCtrlListBinding> <getInputValue> ADFv: Could not find selected item matching value Afghanistan of type: java.lang.String in the list-of-values.Why the value binded to the managed bean or model is not getting updated for the first time. Is this the expected behavior.

Issues with using utl_http with Oracle Wallet

Hello Everyone,
We are experimenting with Oracle wallet and utl_http and are attempting to do an https transfer and we are facing some problems. I will appreciate your help greatly if you can advise on what could be wrong. We are on db version 10.2.0.1 and Unix HP-UX. The intention ping an https url and get a simple 200 response. Future development would include get/post XML documents from that url and other interesting stuff. I understand that utl_http with Oracle wallet can be used for this purpose.
The wallet has been created and the ewallet.p12 exists. We downloaded the SSL certificate from the url's website and uploaded into the wallet.
Everything works if I put in a url with plain http. However, it does not work with an HTTP*S* url.
With HTTPS when I run the below code I get the following error. Again, greatly appreciate your time and help because this is the first time we are using Oracle wallet manager and do not know where to go from here.
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1029
ORA-29268: HTTP client error
declare
url varchar2(225);
req utl_http.req;
resp utl_http.resp;
my_proxy BOOLEAN;
name varchar2(2000);
value varchar2(2000);
V_proxy VARCHAR2(2000);
v_n_proxy varchar2(2000);
v_msg varchar2(100);
v_len PLS_INTEGER := 1000;
BEGIN
-- Turn off checking of status code.
utl_http.set_response_error_check(FALSE);
--Set proxy server
utl_http.set_proxy('my-proxy');
utl_http.set_wallet('file:<full Unix path to the wallet on DB server>','wallet998');
req := utl_http.begin_request('https://service.ariba.com/service/transaction/cxml.asp');
--Set proxy authentication
utl_http.set_authentication(req, 'myproxyid', 'myproxypswd','Basic',TRUE); -- Use HTTP Basic
resp := utl_http.get_response(req);
FOR i IN 1..utl_http.get_header_count(resp) LOOP
utl_http.get_header(resp, i, name, value);
dbms_output.put_line(name || ': ' || value);
END LOOP;
utl_http.end_response(resp);
exception
when others then
dbms_output.put_line(sqlerrm);
END;

I tried this using plsql ...
declare
SOAP_URL constant varchar2(1000) := 'http://125.21.166.27/cordys/com.eibus.web.soap.Gateway.wcp?organization=o=WIPRO,cn=cordys,o=itgi.co.in';
request UTL_HTTP.req;
begin
dbms_output.put_line('Begin Request');
request := UTL_HTTP.begin_request(SOAP_URL,'POST',UTL_HTTP.HTTP_VERSION_1_1);
dbms_output.put_line('After Request');
exception
when others then
dbms_output.put_line('Error : '||sqlerrm);
end;The output was ...
Begin Request
Error : ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1029
ORA-12535: TNS:operation timed outIt seems to be an issue with the webservice, plz check if its available & allowing requests.

Image not displayed in html output used webservice to store in a location

hi
we have used webservices to store the pdf and html outputs but the problem is when we are seeing the preview in the bi publisher we can see the image in pdf and html but when we run through webservices and see the output files that are stored in some location image in the html output is not displayed but in the pdf we can see the image.
i have used the direct insertion image option in the header section. is the problem because i have used the direct insertion.
can you give the idea how to import logo from an external location so that we can check the if it is problem with direct insertion or problem with the webservice as we are storing the output files outside the catlog but it may not be wrong because in pdf we can see the image.
I am not having any idea how to solve thsi issue..
Sorry to bother you with these many questions
Thanks in Advance
Have a Nice day.

Please state which BI Publisher version you are using.
In case it is 10g then please always test the application with the latest patch first!.
BTW today there is been a new patch 11846804 released for 10.1.3.4.1 (March 2011).
regards
Jorge

ADOBE FORMS using Webservice

Hi Experts,
I have a problem with Adobe Forms Using webservice. I created RFC where it saves data from Adobe Forms to a customized table and exposed it as webservice. From the SOA manager, I copied the generated link pasted in the dataconnection in Adobe Lifecycle designer, but whenever I generate the form I keep receiving this error:
"http:// erpwrk1.corp.com:8000/sap/bc/srt/wsdl/bndg_DFA46DE60CFOD33F19F21005056C00008/wsdl11/allinone/ws_policy/document?sap-client=001". Check that the path is correct and that the file is a valid wsdl file.
I already activated services from SICF in relation SOAP runtime. What could be the cause of the problem and how to fix the problem?
Thanks A Lot!
Mae

Hi Ma. Angelica A. Estacio,
From the SOA manager, I copied the generated link pasted in the dataconnection in Adobe Lifecycle designer, but whenever I generate the form I keep receiving this error: Check that the path is correct and that the file is a valid wsdl file and hence i cannot finish the data connection wizard.
From the above posts, it looks like you have resolved the issue. But can you please let me know how did you resolve it ?
Did you check any SAP transaction to find the above mentioned checkbox?
Please revert as this has become critical now.
You can mail me your response on [email protected]
Regards,
Rohit Gugale

SAP Cloud for Customer & SAP ECC/CRM OnPremise integration using WebServices!

Hello All,
I would like to ask if anyone has really created a working integration scenario between a Cloud Solution & an ECC/CRM OnPremise solution?
We are trying to build some prototypes for this, however, due to connectivity errors/issues, unable to proceed.
I'm looking for information on:
> What certificates precisely are needed on both Cloud & OnPrem systems?
> What configuration if any is required on Cloud & OnPrem solution, except for communication system/arrangements on Cloud solution?
> Any use case if available from anyone which can demo integration between Cloud solution & ECC/CRM OnPremise solution.
I'd really appreciate responses on this.
Many Thanks
Ankur

Thanks Sathya for the response.
https://scn.sap.com/community/cloud/blog/2013/10/10/new-e-learning-for-i
ntegration-of-sap-cloud-for-customer-with-sap-erp-and-sa
p-crm-now-available : Not working! => Please check & confirm.
Just to give you our background...we are SAP Cloud Partners & VARs, hence we are building few prototypes for Customer Demos & POC.
Per my understanding, its just one of the OnPrem system, either an ECC OnPrem or CRM OnPrem that you can integrate with one C4C tenant at a time, i.e. to one single tenant. In our case, we are trying to integrate ECC OnPrem with C4C system.
We are in the process of deploying SAP PI as the middleware platform for integration between C4C & ECC/CRM OnPrem., which is going to take few more weeks.
SAP HCI will be the other approach, but we are currently not familiar with that, hence we have a trial to start in coming week for SAP HCI, so this is going to take some time as well.
Hence, WebService is the only currently available option for us to build these prototypes, POC for Customer Demos, to show working integration scenarios between ECC OnPrem & C4C system.
We have been facing some technical issues after setting up necessary communication systems/arrangements on C4C system & trying to do a WS call from SDK also we get error when we do a ping test from within C4C system to check connection.
Has SAP developed any WS integration between C4C & either of the ECC or CRM OnPrem system? Or is it just PI & HCI which SAP has for integration?
I'd truly appreciate if you can guide us on creating few integration scenarios (Working ones of course ) using Webservice between C4C & ECC OnPrem system.
Many Thanks
Ankur

Can I use Webservices SDK for scheduling Reports?

Hi All,
I have a requirement to use Webservices SDK. The process flow is explained as below:-
PeopleSoft calls Java component which schedules the BO Reports by calling BO program Objects. I was using BOE SDK before. But SAP advised to move to Webservices SDK as to remove CORBA connection issues.
Can I use Webservices SDK for scheduling Reports?
Please update.
Thanks,
Anu

Its possible to schedule reports from web services SDK. Its stated in the Web services SDK Doc.

Error while using Webservice.

Hi All,
we have one scenario SOAP to RFC ,where 3rd party using WEbservice to send the data using SOAP adapter to PI .
But now when 3rd party trying to send the data through websevice they are getting error message ' javax.xml.ws.soap.SOAPFaultException: Server Error' and message not reached to PI .
When I tried from my end from Altova XML SPY i m getting following error .
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>System Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context/>
<code>RCVR_DETERMINATION.MESSAGE_INCOMPLETE</code>
<text>Message is incomplete. No Sender found</text>
</s:SystemError>
/detail>
</SOAP:Fault>
</SOAP:Body>
Any idea where will be error present.
any little help towards solving the issue will be very helpful.

Hi,
the SOAP sender channel can be addressed with:
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
See as well [Configuring the Sender SOAP Adapter|http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm]
Obviously the "sender" is missing. Please check your wsdl for that and recreate it.
Regards,
Udo

Unable to load webservice using webservice action block

Hi,
I am trying to call a webservice using xMII 11.5 .My webservice url is http://machinename/Test/Service1.asmx?wsdl.This webservice is invoked using internetexplorer.When I try to configure this using webservice action block I am getting the error message stating "SOAP service could not be loaded.White spaces are required between public id and system id".
Can anyone help me on this issue.

Hi,
You go through the following threads:
https://forums.sdn.sap.com/click.jspa?searchID=14545521&messageID=5310227
https://forums.sdn.sap.com/click.jspa?searchID=14545521&messageID=5765282
https://forums.sdn.sap.com/click.jspa?searchID=14545521&messageID=5803591
Hope this will help you.
Thanks,
Manisha

Issue while using SUBPARTITION clause in the MERGE statement in PLSQL Code

Hello All,
I am using the below code to update specific sub-partition data using oracle merge statements.
I am getting the sub-partition name and passing this as a string to the sub-partition clause.
The Merge statement is failing stating that the specified sub-partition does not exist. But the sub-partition do exists for the table.
We are using Oracle 11gr2 database.
Below is the code which I am using to populate the data.
declare
ln_min_batchkey PLS_INTEGER;
ln_max_batchkey PLS_INTEGER;
lv_partition_name VARCHAR2 (32767);
lv_subpartition_name VARCHAR2 (32767);
begin
FOR m1 IN ( SELECT (year_val + 1) AS year_val, year_val AS orig_year_val
FROM ( SELECT DISTINCT
TO_CHAR (batch_create_dt, 'YYYY') year_val
FROM stores_comm_mob_sub_temp
ORDER BY 1)
ORDER BY year_val)
LOOP
lv_partition_name :=
scmsa_handset_mobility_data_build.fn_get_partition_name (
p_table_name => 'STORES_COMM_MOB_SUB_INFO',
p_search_string => m1.year_val);
FOR m2
IN (SELECT DISTINCT
'M' || TO_CHAR (batch_create_dt, 'MM') AS month_val
FROM stores_comm_mob_sub_temp
WHERE TO_CHAR (batch_create_dt, 'YYYY') = m1.orig_year_val)
LOOP
lv_subpartition_name :=
scmsa_handset_mobility_data_build.fn_get_subpartition_name (
p_table_name => 'STORES_COMM_MOB_SUB_INFO',
p_partition_name => lv_partition_name,
p_search_string => m2.month_val);
                    DBMS_OUTPUT.PUT_LINE('The lv_subpartition_name => '||lv_subpartition_name||' and lv_partition_name=> '||lv_partition_name);
IF lv_subpartition_name IS NULL
THEN
                         DBMS_OUTPUT.PUT_LINE('INSIDE IF => '||m2.month_val);
INSERT INTO STORES_COMM_MOB_SUB_INFO T1 (
t1.ntlogin,
t1.first_name,
t1.last_name,
t1.job_title,
t1.store_id,
t1.batch_create_dt)
SELECT t2.ntlogin,
t2.first_name,
t2.last_name,
t2.job_title,
t2.store_id,
t2.batch_create_dt
FROM stores_comm_mob_sub_temp t2
WHERE TO_CHAR (batch_create_dt, 'YYYY') = m1.orig_year_val
AND 'M' || TO_CHAR (batch_create_dt, 'MM') =
m2.month_val;
ELSIF lv_subpartition_name IS NOT NULL
THEN
                    DBMS_OUTPUT.PUT_LINE('INSIDE ELSIF => '||m2.month_val);
MERGE INTO (SELECT *
FROM stores_comm_mob_sub_info
SUBPARTITION (lv_subpartition_name)) T1 --> Issue Here
USING (SELECT *
FROM stores_comm_mob_sub_temp
WHERE TO_CHAR (batch_create_dt, 'YYYY') =
m1.orig_year_val
AND 'M' || TO_CHAR (batch_create_dt, 'MM') =
m2.month_val) T2
ON (T1.store_id = T2.store_id
AND T1.ntlogin = T2.ntlogin)
WHEN MATCHED
THEN
UPDATE SET
t1.postpaid_totalqty =
(NVL (t1.postpaid_totalqty, 0)
+ NVL (t2.postpaid_totalqty, 0)),
t1.sales_transaction_dt =
GREATEST (
NVL (t1.sales_transaction_dt,
t2.sales_transaction_dt),
NVL (t2.sales_transaction_dt,
t1.sales_transaction_dt)),
t1.batch_create_dt =
GREATEST (
NVL (t1.batch_create_dt, t2.batch_create_dt),
NVL (t2.batch_create_dt, t1.batch_create_dt))
WHEN NOT MATCHED
THEN
INSERT (t1.ntlogin,
t1.first_name,
t1.last_name,
t1.job_title,
t1.store_id,
t1.batch_create_dt)
VALUES (t2.ntlogin,
t2.first_name,
t2.last_name,
t2.job_title,
t2.store_id,
t2.batch_create_dt);
END IF;
END LOOP;
END LOOP;
COMMIT;
end;
Much appreciate your inputs here.
Thanks,
MK.
(SORRY TO POST THE SAME QUESTION TWICE).
Edited by: Maddy on May 23, 2013 10:20 PM

Duplicate question

Issue in using presentation variable as filter condition in the reports

Hi,
I have an issue in using presentation variable as filter condition in my reports the details are as follows:
Details :
We want to implement the Max and Min variables through Presentation variables only.we do not want to implement it through session variables in this case.
We have two variables MIN and MAX to be used as Presentation Variables,for a column of the report (which is a quantity),so that the user wants to see the data for this column within a particular range.i.e the Min and the Max.This part has been implemented well . The issue is when the user wants to see the full data.In that case we will not pass any values to these two Presentation Variable or in other words we are not restricting the report data so we are not passing any value to the variables,this is when the report is throwing the error. we want to leave this variables blank in that case.but this is giving error.
Please suggest how can I overcome this issue.
Thanks in Advance.
Regards,
Praveen

i think you have to use guided navigation for this. create two reports first is the one you are having currently and second is the one in which remove the presentation variable from the column formula. i.e. the same report with no aggregation applied.
Now create a dummy report and make it return value only when the presentation variable value is not equal to max or min. guide the report to navigate between the first and second report based on the result of the dummy report.

Any issues with using LDAP on LINUX for GRC 5.2 UME?

Our company is converting our LDAP servers from AIX to LINUX. The DNS name used in our UME connection should not change. Are there any issues with using LDAP on LINUX? We are currently on GRC 5.2 SP9 (in the middle of upgrading to SP12).
Also, I have been trying to connect our test UME system to a test LDAP box that has already been converted to LINUX but keep getting a 'connection failed' error when I try to test it.
Do you have to reboot the server to test changing the LDAP connections? I've been trying it by going into UME, pulling up the LDAP tab, hitting the Modify button, entering the new userid and password for test LDAP, and hitting the Test Connection button. I've verified that this userid and password is correct for test LDAP.
Is there a way to get more information about why the connection failed?
Thanks.

I've been told by our LDAP Support group that none of the other configuration settings should have to be changed. I should only have to change the id and password to connect to a test version of LDAP instead of our regular connection to the production LDAP.
Can you test a connection for a different userid/password without having to reboot/restart the server? Do I need to change these two settings, save then, reboot/restart, and then do the Test Connection button?
Thanks.

Issues with using relative links in Captivate 8

Is anyone else having issues with using relative links in Captivate 8? These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the situation... We have courses that are made up of multiple lessons which as separate Captivate files. Within those lessons are buttons to link to external documents (which live in a shared document folder), demonstrations, etc. We use relative links because we post these to our amazon servers and we also sell them to clients where they can post them on their own web servers or in their LMS. SO we can't put in full paths for the links or we'd have to change them constantly. So an example is that the link for a button might be "../Document/nameofdoc.pdf" This would be going to a user guide or something that is posted in the "Document" folder that lives at the same level as the lesson's folder. But now, all of the sudden, none of our bazillion links is working. And I've tried buttons, hyperlinks, and even the old click box. Nothing works with relative links. And I did check the permissions on every file and folder on our Amazon server to verify nothing changed there as well. Any suggestions?

I have the same issue with relative links using Captivate 8. I am trying to load Captivate modules into an LMS using relative links to document files within the LMS. The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
Help?

Issues with using the output redirection character with newer NXOS versions?

Has anyone seen any issues with using the output redirection character with newer NXOS versions?
Am receiving "Error 0x40870004 while copying."
Simply copying a file from bootflash to tftp is ok.
This occurs for both 3CDaemon and Tftpd32 softwares.
Have tried it on multiple switches - same issue.
Any known bugs?
thanks!
The following is an example of bad (NXOS4.1.1b) and good (SANOS3.2.1a)
MDS2# sho ver | inc system
system:    version 4.1(1b)
system image file is:    bootflash:///m9200-s2ek9-mz.4.1.1b.bin
system compile time:     10/7/2008 13:00:00 [10/11/2008 09:52:55]
MDS2# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
TFTP put operation failed:Access violation
Error 0x40870004 while copying tftp://10.73.54.194/
MDS2# copy bootflash:cpu_logfile tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP put operation was successful
MDS2#
ck-ci9216-001# sho ver | inc system
system:    version 3.2(1a)
system image file is:    bootflash:/m9200-ek9-mz.3.2.1a.bin
system compile time:     9/25/2007 18:00:00 [10/06/2007 06:46:51]
ck-ci9216-001# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
|
TFTP put operation was successful

Please check with new version of TFTPD 32 server. The error may be due to older version of TFPT server, the new version available solved this error. Files are getting uploaded with no issues.
1. Download tftpd32b.zip from:
http://tftpd32.jounin.net/tftpd32_download.html
2. Copy the tftpd32b.zip file into an empty directory and extract it.
3. Copy the file you want to transver into the directory containing tftpd32.exe.
4. Run tftpd32.exe from that directory. The "Base Directory" field should show the path to the directory containing the file you want to transfer.
At this point, the tftpserver is ready to begin serving files. As devices request files, the main tftpd32 window will log the requests.
Best Regards...

Issue with use of Function Module GUI_UPLOAD

Hi Experts,
I have an issue in using the Function Module GUI_UPLOAD for uploading the contents of an Excel file on the Presentation Server to an internal table in an ABAP Program.
My file consists of around 300 records but the FM succeeds in uploading only the first 6 lines to the Internal Table specified while calling the FM.
I dont have any idea why this happens. Any pointers in this direction will be helpful.
Thanks in advance.
Regards,
Keerthi

Hi,
Kindly go through this link below:
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=60655105
Hope it helps you
Regards
Mansi

Issue: Datacontrol using webservice

Similar Messages

Maybe you are looking for