Issue in loading specific columns from a file to teradata table using IKM
Hi,
Can any one help to resolve the issue in loading specific columns from text file to teradata table.
i tried using IKM file teradata and columns are getting displaced.
my requirement suppose i have 5 columns in file and i have to load only 3columns to table using IKM.
same thing can be achived using LKM file to teradata but i want use IKM.
please suggest me on this
Regards
Vinod
Hi,
I believe that the problem you are having is that you have a delimited file, of which you want to pick columns from position 2,3,5. In this case, ODI will pick the first 3 columns of a delimited file regardless of position.
For example, if you a tab delimited file with c1,c2,c3,c4,c5 columns, and you want only columns c2,c3,c5 - when mapping these in an ODI interface, and executing, you will actually pick up the data from c1,c2,c3 as these are the first three columns in the file (reading from left to right). You can ignore "columns" on the right hand side of a file, but not the left. E.g delimited file with c1,c2,c3,c4,c5. Only pick columns c1,c2 will give you data for the first 2 columns
Create a temporary table to load all the data from the file, and use you temp table to extract the data you require. Or you could get the file created with the first three columns as the columns you require.
Cheers
Bos
Edited by: Bos on Jan 18, 2011 1:06 PM
Similar Messages
-
SQL* Loader Loading specific column from CSV file to the table
Dear All,
Iam Loading specific column from .CSV file to the oracle table.
Could pls help how i can load only that cols into the table
Eg: CSV file having id, Frst_name,Last_name, Address,Phone,Insurance etc
out of this I want to load only Frst_name,Last_name columns to oracle table say fname and lname.
Thanks in Adv.
JunuLily,
I made some changes to your table def but you will get the idea
-- Table EMPLOYEE
CREATE TABLE EMPLOYEE
EMPID NUMBER NOT NULL,
EMPNICKNAME VARCHAR2(10 BYTE) NULL,
FNAME VARCHAR2(20 BYTE) NOT NULL,
MI VARCHAR2(20 BYTE) NULL,
LNAME VARCHAR2(20 BYTE) NOT NULL,
FULLNAME VARCHAR2(20 BYTE) NOT NULL,
HIREDATE DATE DEFAULT SYSDATE NOT NULL
-- data file employee.dat
1,amy,b,amy b
2,cindy,d,cindy d
3,eric,f,eric f
4,gary,h,gary
-- Control file : Employee.ctl ( you can use truncate, replace or append , see sqlldr for more options)
load data
Truncate into table employee
fields terminated by ","
optionally enclosed by '"'
TRAILING NULLCOLS
empId INTEGER EXTERNAL,
FName char(20),
LName char(20),
FullName char(30)
now to load use following or you can speicify infile in control fle
sqlldr username/passowrd control=employee.ctl data=employee.dat log=employee.log
{code}
Hope this help.
Regards -
How to load the data from .csv file to oracle table???
Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
Import data from text file to a table using t-sql
Hi,
I am trying to import data from a text file to a table using the below query but it is returning an error.
SELECT *, 2 FROM OPENROWSET(BULK 'W:\file.txt',
FORMATFILE = 'W:\format_file.xml', FIRSTROW = 1, LASTROW = 1) as f
The error is:
Bulk load data conversion error (truncation) for row 1, column 1 (COPYRIGHT_DETAIL_CODE).<BCPFORMAT xmlns="http://schemas.microsoft.com/sqlserver/2004/bulkload/format" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RECORD>
<FIELD ID="1" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="1" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="2" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="5" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="3" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="5" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="4" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="10" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="5" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="1" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="6" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="1" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="7" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="10" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="8" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="10" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="9" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="8" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="10" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="8" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="11" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="8" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="12" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="5" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="13" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="8" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="14" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="2" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="15" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="3" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="16" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="4" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="17" xsi:type="CharTerm" TERMINATOR="\r\n" MAX_LENGTH="43" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
</RECORD>
<ROW>
<COLUMN SOURCE="1" NAME="Name1" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="2" NAME="Name2" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="3" NAME="Name3" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="4" NAME="Name4" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="5" NAME="Name5" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="6" NAME="Name6" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="7" NAME="Name7" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="8" NAME="Name8" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="9" NAME="Name9" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="10" NAME="Name10" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="11" NAME="Name11" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="12" NAME="Name12" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="13" NAME="Name13" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="14" NAME="Name14" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="15" NAME="Name15" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="16" NAME="Name16" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="17" NAME="Name17" xsi:type="SQLVARYCHAR"/>
</ROW>
</BCPFORMAT>
The format file that I am using is just like the same one above.
-
Exporting specific columns from XLS file to a new XLS or XLSX file using powershell
The scenario is that i have a file that our server is constantly dumping data to on a daily basis and out of all the data i only need 2 columns. I need to be a able to automate this because i need to generate a monthly report based on those two columns.
That being said, i need to be able to extract two full columns from datafile1.xls to newdatafile.xlsx. If it would be easier if the original file is CSV i can easily save the data in CSV format instead of XLS.
Thanks in advance.I see, im having a hard time executing the script, i keep getting the following error:
'""Microsoft.Jet.OLEDB.4.0"
has not been registered.";'
and
when i try to run it like this i dont get any errors BUT nothing happens:
C:\Windows\syswow64\rundll32.exe "C:\Program Files\Common Files\System\Ole DB\oledb32.dll",c:\temp\t.ps1
This is the code, which to tell you the truth im not really that familiar with :\
$strFileName = "C:\temp\original\styles.xls"
$strSheetName = 'STYLES$'
$strProvider = "Provider=Microsoft.Jet.OLEDB.4.0"
$strDataSource = "Data Source = $strFileName"
$strExtend = "Extended Properties=Excel 8.0"
$strQuery = "Select STYLE CODE , LAST UPDATE from [$strSheetName]"
$objConn = New-Object System.Data.OleDb.OleDbConnection("$strProvider;$strDataSource;$strExtend")
$sqlCommand = New-Object System.Data.OleDb.OleDbCommand($strQuery)
$sqlCommand.Connection = $objConn
$objConn.open()
$DataReader = $sqlCommand.ExecuteReader()
While($DataReader.read())
$ComputerName = $DataReader[0].Tostring()
"Querying $computerName ..."
Get-WmiObject -Class Win32_Bios -computername $ComputerName
$dataReader.close()
$objConn.close()
For both PowerShell or VBScript you are missing the libraries. You need to download and install the ACE drivers.
Search for ACE drivers.
¯\_(ツ)_/¯ -
Exporting data from text file to a table using utl_file
Dear all,
I have a text file as below and i have a table having 12 columns. Now i need to insert this text file into the table story_books.
CREATE TABLE story_books
book_id NUMBER,
Category VARCHAR2(100 BYTE),
Book_type VARCHAR2(100 BYTE),
Name VARCHAR2(700 BYTE),
Location VARCHAR2(700 BYTE),
Ownership_code VARCHAR2(700 BYTE),
Author VARCHAR2(700 BYTE),
Less_Sel_fact VARCHAR2(700 BYTE),
Reason VARCHAR2(700 BYTE),
Buying VARCHAR2(700 BYTE),
Suspected Book VARCHAR2(700 BYTE),
Conditions VARCHAR2(700 BYTE)
-------------------------text file---------------
Books Out Table: Books
Book. Type Name Location Ownership Code
Story SL hyd SS-HYD
Known Author: Unknown
Less Selling Factors: Thunderstorms
Reason: Unknown
Buying (if applicable):
Not Applicable
Suspected Book:
Unknown
Conditions to increace sales:
Advertisement in all areas
i was able to read the data and storing if it is in the same line.But i dont know how to read below data
Book. Type Name Location Ownership Code
Story SL hyd SS-HYD
In this data i have to search for 'Book. type' and then i need to save the word 'Story' to the column 'Book_type'
Then i need to search for 'Name' and i need to save 'SL' into the column into 'Name'
Then i need to search for 'Location' and i need to save 'hyd' into the column into 'Location'
I was able to extract the data if it is in below format using utl_file.get_line
Known Author: Unknown
Less Selling Factors: Thunderstorms
Reason: Unknown
Any one can explain me how to solve the above criteria.
Thanks in advance.Dear all,
I have a text file as below and i have a table having 12 columns. Now i need to insert this text file into the table story_books.
CREATE TABLE story_books
book_id NUMBER,
Category VARCHAR2(100 BYTE),
Book_type VARCHAR2(100 BYTE),
Name VARCHAR2(700 BYTE),
Location VARCHAR2(700 BYTE),
Ownership_code VARCHAR2(700 BYTE),
Author VARCHAR2(700 BYTE),
Less_Sel_fact VARCHAR2(700 BYTE),
Reason VARCHAR2(700 BYTE),
Buying VARCHAR2(700 BYTE),
Suspected Book VARCHAR2(700 BYTE),
Conditions VARCHAR2(700 BYTE)
-------------------------text file---------------
Books Out Table: Books
Book. Type Name Location Ownership Code
Story SL hyd SS-HYD
Known Author: Unknown
Less Selling Factors: Thunderstorms
Reason: Unknown
Buying (if applicable):
Not Applicable
Suspected Book:
Unknown
Conditions to increace sales:
Advertisement in all areas
i was able to read the data and storing if it is in the same line.But i dont know how to read below data
Book. Type Name Location Ownership Code
Story SL hyd SS-HYD
In this data i have to search for 'Book. type' and then i need to save the word 'Story' to the column 'Book_type'
Then i need to search for 'Name' and i need to save 'SL' into the column into 'Name'
Then i need to search for 'Location' and i need to save 'hyd' into the column into 'Location'
I was able to extract the data if it is in below format using utl_file.get_line
Known Author: Unknown
Less Selling Factors: Thunderstorms
Reason: Unknown
Any one can explain me how to solve the above criteria.
Thanks in advance. -
HELP:Loading XMLtype column from xml file using SQLLOADER
Hi,
My table structure is
crtd_date date,
xml_doc XMLType
I have to insert the data dynamically from sqlloader,is it possible? - if it possible please help with controlfile.
i wrote the controlfile like
LOAD DATA
INTO TABLE drvt_xml replace
XMLType(xmldoc)
FIELDS TERMINATED BY ',' optionally enclosed by '"'
crtd_date SYSDATE,
fname filler char,
xmldoc lobfile(fname) terminated by eof
)Hi,
I am having the same issue wer u able to write the control file and did it work?
If yes pls post ur control file.
Thanks in advance!! -
Load XML-data from large file into plain table
We have to load data from an XML file to a relational table row by row.
The structure of the data is very simple:
<ROOT>
<repReport>
<KNZ>XY</KNZ>
<LA>test123</LA>
<Ident>AA20</Ident>
</repReport>
<repReport>
</repReport>
</ROOT>.
The table econtains the fields KNZ, LA, Ident, ...
If the file is small the following PL/SQL-code works fine:
CREATE OR REPLACE PROCEDURE Loadxml_Epd AS
fil BFILE ;
len INTEGER;
insrow INTEGER;
ctxHdl NUMBER;
buffer_c CLOB ;
amt NUMBER := dbms_lob.lobmaxsize;
src_offset NUMBER := 1 ;
dst_offset NUMBER := 1 ;
lang_ctx NUMBER := dbms_lob.default_lang_ctx;
warning NUMBER;
errNo NUMBER;
errMsg VARCHAR2(1999);
BEGIN
fil := BFILENAME('XML_DIR','200412MKBReport.xml');
DBMS_LOB.OPEN(fil, DBMS_LOB.LOB_READONLY);
len := DBMS_LOB.GETLENGTH(fil);
INSERT INTO INIT_CLOB(init) VALUES( EMPTY_CLOB())
RETURNING init INTO buffer_c;
dbms_lob.loadfromfile(buffer_c,fil, amt, dst_offset, src_offset);
ctxHdl := dbms_xmlsave.newContext ('SST_XML_EPD');
dbms_xmlsave.setRowTag (ctxHdl , 'repReport');
dbms_xmlsave.SetIgnoreCase(ctxHdl , 1);
dbms_xmlsave.SetSqlToXmlnameEscaping (ctxHdl , TRUE);
dbms_xmlsave.propagateOriginalException(ctxHdl , TRUE);
dbms_xmlsave.SetCommitBatch(ctxHdl , 1);
dbms_xmlsave.SetBatchSize(ctxHdl , 1);
insrow := DBMS_XMLSAVE.insertXML(ctxHdl,buffer_c);
DBMS_OUTPUT.PUT_LINE('Anzahl Sätze:' || TO_CHAR(insrow,'999999999'));
IF DBMS_LOB.ISOPEN(fil) = 1 THEN
DBMS_LOB.CLOSE(fil);
END IF;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(SQLCODE);
errMsg := SQLERRM;
DBMS_OUTPUT.PUT_LINE(SUBSTR(errMsg,1,2000));
IF DBMS_LOB.ISOPEN(fil) = 1 THEN
DBMS_LOB.CLOSE(fil);
END IF;
END;
But if the file is larger (50 MB in our case) this does not work. In various documents we found that we have to use another sort of XML-parser but we did not find any example how this is really done.
Does anybody have an example how to load this data that is as simple as our problem?We have to load data from an XML file to a relational table row by row.
The structure of the data is very simple:
<ROOT>
<repReport>
<KNZ>XY</KNZ>
<LA>test123</LA>
<Ident>AA20</Ident>
</repReport>
<repReport>
</repReport>
</ROOT>.
The table econtains the fields KNZ, LA, Ident, ...
If the file is small the following PL/SQL-code works fine:
CREATE OR REPLACE PROCEDURE Loadxml_Epd AS
fil BFILE ;
len INTEGER;
insrow INTEGER;
ctxHdl NUMBER;
buffer_c CLOB ;
amt NUMBER := dbms_lob.lobmaxsize;
src_offset NUMBER := 1 ;
dst_offset NUMBER := 1 ;
lang_ctx NUMBER := dbms_lob.default_lang_ctx;
warning NUMBER;
errNo NUMBER;
errMsg VARCHAR2(1999);
BEGIN
fil := BFILENAME('XML_DIR','200412MKBReport.xml');
DBMS_LOB.OPEN(fil, DBMS_LOB.LOB_READONLY);
len := DBMS_LOB.GETLENGTH(fil);
INSERT INTO INIT_CLOB(init) VALUES( EMPTY_CLOB())
RETURNING init INTO buffer_c;
dbms_lob.loadfromfile(buffer_c,fil, amt, dst_offset, src_offset);
ctxHdl := dbms_xmlsave.newContext ('SST_XML_EPD');
dbms_xmlsave.setRowTag (ctxHdl , 'repReport');
dbms_xmlsave.SetIgnoreCase(ctxHdl , 1);
dbms_xmlsave.SetSqlToXmlnameEscaping (ctxHdl , TRUE);
dbms_xmlsave.propagateOriginalException(ctxHdl , TRUE);
dbms_xmlsave.SetCommitBatch(ctxHdl , 1);
dbms_xmlsave.SetBatchSize(ctxHdl , 1);
insrow := DBMS_XMLSAVE.insertXML(ctxHdl,buffer_c);
DBMS_OUTPUT.PUT_LINE('Anzahl Sätze:' || TO_CHAR(insrow,'999999999'));
IF DBMS_LOB.ISOPEN(fil) = 1 THEN
DBMS_LOB.CLOSE(fil);
END IF;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(SQLCODE);
errMsg := SQLERRM;
DBMS_OUTPUT.PUT_LINE(SUBSTR(errMsg,1,2000));
IF DBMS_LOB.ISOPEN(fil) = 1 THEN
DBMS_LOB.CLOSE(fil);
END IF;
END;
But if the file is larger (50 MB in our case) this does not work. In various documents we found that we have to use another sort of XML-parser but we did not find any example how this is really done.
Does anybody have an example how to load this data that is as simple as our problem? -
Loading Date fields from flat file to Oracle tables
Hi,
I have a flat file with a few date columns. I have given the format for the date field while creating the data store for the flat file. The format I used is 'YYYY-MM-DD'.
But I get an error when I execute it after associating the module with LKM & IKM.
The error message is as follows:
org.apache.bsf.BSFException: exception from Jython: Traceback (innermost last):
File "<string>", line 3, in ?
OS command has signalled errors
Can anyone help me out.
ThanksAt the time of DataStore creation. You take that date field as string.
After this, in interface, when you map this date field with table field. You should use CONVERT(<field name>,DATE) in expression editor. -
How to pass parameters to the Control file while loading the data from flat file to staging table
Thanks in advance
Hi ,
LOADDATA statement is required at the beginning of the control file.
INFILE: INFILE keyword is used to specify location of the datafile or datafiles.
INFILE* specifies that the data is found in the control file and not in an external file. INFILE ‘$FILE’, can be used to send the filepath and filename as a parameter when registered as a concurrent program.
INFILE ‘/home/vision/kap/import2.csv’ specifies the filepath and the filename.
Hope this will help you...... -
pls send ans for this
1b5595eb-fcfc-48cc-90d2-43ba913ea79f wrote:
pls send ans for this
use any text editor to eliminate the dot before loading -
Data Load from XML file to Oracle Table
Hi,
I am trying to load data from XML file to Oracle table using DBMS_XMLStore utility.I have performed the prerequisites like creating the directory from APPS user, grant read/write to directory, placing the data file on folder on apps tier, created a procedure ‘insertXML’ to load the data based on metalink note (Note ID: 396573.1 How to Insert XML by passing a file Instead of using Embedded XML). I am running the procedure thru below anonymous block to insert the data in the table.
Anonymous block
declare
begin
insertXML('XMLDIR', 'results.xml', 'employee_results');
end;
I am getting below error after running the anonymous block.
Error : ORA-22288: file or LOB operation FILEOPEN failed”
Cause : The operation attempted on the file or LOB failed.
Action: See the next error message in the error stack for more detailed
information. Also, verify that the file or LOB exists and that
the necessary privileges are set for the specified operation. If
the error still persists, report the error to the DBA.
I searched this error on metalink and found DOC ID 1556652.1 . I Ran the script provided in the document. PFA the script.
Also, attaching a document that list down the steps that I have followed.
Please check and let me know if I am missing something in the process. Please help to get this resolve.
Regards,
SankalpThanks Bashar for your prompt response.
I ran the insert statement but encountered error,below are the error details. statement.
Error report -
SQL Error: ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.XMLTYPE", line 296
ORA-06512: at line 1
22288. 00000 - "file or LOB operation %s failed\n%s"
*Cause: The operation attempted on the file or LOB failed.
*Action: See the next error message in the error stack for more detailed
information. Also, verify that the file or LOB exists and that
the necessary privileges are set for the specified operation. If
the error still persists, report the error to the DBA.
INSERT statement I ran
INSERT INTO employee_results (USERNAME,FIRSTNAME,LASTNAME,STATUS)
SELECT *
FROM XMLTABLE('/Results/Users/User'
PASSING XMLTYPE(BFILENAME('XMLDIR', 'results.xml'),
NLS_CHARSET_ID('CHAR_CS'))
COLUMNS USERNAME NUMBER(4) PATH 'USERNAME',
FIRSTNAME VARCHAR2(10) PATH 'FIRSTNAME',
LASTNAME NUMBER(7,2) PATH 'LASTNAME',
STATUS VARCHAR2(14) PATH 'STATUS'
Regards,
Sankalp -
How to load empty column from flatfiles to tables in oracle using aql*loade
HI,,
i am trying to load data from flat files to oracle tables using sql*loader. i got empty column to load. while i am trying it is throwing an error as null colums canot load...
plz help me with this...
Thanks in adavnce..I believe you need to use 'trailing nullcols' as a parameter in your sql loader command.
See example below:
LOAD DATA
INFILE *
INTO TABLE load_delimited_data
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
( data1,
data2
BEGINDATA
11111,AAAAAAAAAA
22222,"A,B,C,D,"
{code} -
Loading the data from a text file to a table using pl/sql
Hi Experts,
I want to load the data from a text (sample1.txt) file to a table using pl/sql
I have used the below pl/sql code
declare
f utl_file.file_type;
s varchar2(200);
c number := 0;
begin
f := utl_file.fopen('TRY','sample1.txt','R');
loop
utl_file.get_line(f,s);
insert into sampletable (a,b,c) values (s,s,s);
c := c + 1;
end loop;
exception
when NO_DATA_FOUND then
utl_file.fclose(f);
dbms_output.put_line('No. of rows inserted : ' || c);
end;
and my sample1.txt file looks like
1
2
3
The data is getting inserted, with below manner
select * from sampletable;
A B C
1 1 1
2 2 2
3 3 3
I want the data to get inserted as
A B C
1 2 3
The text file that I have is having three lines, and each line's first value should go to each column
Please help...
Thanksdeclare
f utl_file.file_type;
s1 varchar2(200);
s2 varchar2(200);
s3 varchar2(200);
c number := 0;
begin
f := utl_file.fopen('TRY','sample1.txt','R');
utl_file.get_line(f,s1);
utl_file.get_line(f,s2);
utl_file.get_line(f,s3);
insert into sampletable (a,b,c) values (s1,s2,s3);
c := c + 1;
utl_file.fclose(f);
exception
when NO_DATA_FOUND then
if utl_file.is_open(f) then utl_file.fclose(f); ens if;
dbms_output.put_line('No. of rows inserted : ' || c);
end;SY.
Maybe you are looking for
-
How to force Captals in a text field..
Any Ideas please? Also i have a date filed which is set to Australain English and the format comes out correct. BUT I also have a barcode that uses the same infomation but comes out in the wrong format. Any help with any of these is greatly appricate
-
My question is about abobe reader for android jelly bean. running a site techblis.com most of readers claims that Adobe reader working well on all android versions axcept jellybean, for downloading i'hv shared a googl's play link: https://play.google
-
hi, <b>How to create connection pooling in WAS for SAP R/3 System.</b> I have written session bean for Creating SalesOrder in SAP Using JCO. my application will create 100 connection objects if 100 Client Calls for my SessionBean .so that i need t
-
Export iCal calendars with AppleScript
How might I do this? Since the iCal ics files aren't in a neat and tidy place anymore, now I have to export. Can anybody help? Thanks so much! -Ben
-
Split large file : Recordset per message
Hi experts, I have a large file that I want to split: flat file -XI. This is an exemple of file : HEADER;XYZ;123;123456 DETAIL;XYZ;123;123456 DETAIL;XYZ;123;123456 DETAIL;XYZ;123;123456 DETAIL;XYZ;123;123456 TRAILER;XYZ;123;456 Every splited file sho