Issue in SOAP PI  Scenario(With Load Test)

Hi all,
we are in the middle of load testing,
Scenario: SOAP> PI....
here are the findings,
1. when the size of the xml is for say upto 60 line items, the message gets to PI and gets processed.
2. when the size of the xml is for 100 lineitems , the message doesn't even log @ PI in the AF/ IE.......but the caller of the service gets back a blank response after 2 minutes.
Can someone throw light into what direction i have to look into,
ive looked even in the server logs, don't know whr else to look. Can some1 tellme wher to look @ or what approach that i should take?

Hello hankovak jovani ,
We are doing SOAP testing using XML SPY editor , after creating the webservice in ID and we have dowloaded the WSDL,  uploaded the WSDL into XML SPY and send a request from XMLspy to PI .. it says empty response has sent , We tried changing the XML file but it did not worked
I have checked in runtimework bench ..message id generated but there was no payload in that.
Can you please help me by sharing the procudure how to do this testing or the way forward to over come this problem ?
Waiting for your response....
Thanks
Sangeet

Similar Messages

  • File-Soap-File scenario with asynch - synch bridge

    Hi,
    I am new to PI and I'm trying to develop a FIle-SOAP-File scenario with asynch-synch bridge. These are the components in my integration builder:
    Business Component to act as both the sender and receiver
    1 outbound communication channel to pick up the file from ftp server
    1 SOAP communication channel
    1 inbound communication channel to write file to the ftp server
    receiver determination
    interface determination
    sender agreement
    receiver agreement
    In my outbound channel, I am using:
    Processing sequence:
    1     AF_Modules/RequestResponseBean                Local Enterprise Bean     1
    2     CallSapAdapter                                                         Local Enterprise Bean     2
    3     AF_Modules/ResponseOnewayBean                Local Enterprise Bean     3
    Module configuration:
    1     passThrough                         true
    3     receiverChannel                        inbound communication channel to write file to the ftp server
    3     receiverService                         Business component where the channel above is found.
    When I run the scenario, I am able to get the file from ftp server, map it to SOAP format according to the wsdl, forward the message to SOAP adapter, send it to web service, get the response back from web service, map the data to a regular file format. However, it fails to write back to the ftp server.  I am getting Java null pointer error at AF_Modules/ResponseOnewayBean.
    2010-07-28 15:48:01     Information     SOAP: completed the processing
    2010-07-28 15:48:01     Information     SOAP: continuing to response message 2ce3ec60-9a9a-11df-b109-00145ec5c1ae
    2010-07-28 15:48:01     Information     The message was successfully delivered to the application using connection SOAP_http://sap.com/xi/XI/System.
    2010-07-28 15:48:01     Information     The message status was set to DLVD.
    2010-07-28 15:48:02     Information     The message was successfully transmitted to endpoint http://vs06cs01.sce.com:8000/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System.
    2010-07-28 15:48:02     Information     The message status was set to DLVD.
    2010-07-28 15:48:02     Information     The application sent the message synchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
    2010-07-28 15:48:02     Information     MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
    2010-07-28 15:48:02     Error     MP: exception caught with cause java.lang.NullPointerException:
    2010-07-28 15:48:02     Error     File processing failed with java.lang.NullPointerException:
    Had anyone encountered this error? Any suggestions is greatly appreciated.
    Thanks.

    Thanks for the replies. I checked my module parameters and I realized that i entered the wrond business service. I fixed that and ensure that all 3 channels are running.
    I ran the scenario again and it does not give me Java Null pointer exception. However, it gives me a different errror.
    2010-07-29 08:52:31     Information     The message status was set to DLVD.
    2010-07-29 08:52:31     Information     MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
    2010-07-29 08:52:31     Error     MP: exception caught with cause com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
    2010-07-29 08:52:31     Error     File processing failed with com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
    I am trying to check all my settings again. Any pointers regarding the errors above?
    Thank you.

  • IDoc to soap synchronous scenario with BPM

    Hi,
    I am working on IDoc to soap synchronous scenario using BPM. Here i am facing lot of soap exceptions in my production system. I handled the exceptions. The data getting excuted for the first time, the same data(just changed the description)is giving exceptions for the second time. Please let me know why the exceptions are getting, and different type of exceptions and solutions for the same.(Blog also is fine)
    Thanks & Regards,
    Pragathi.

    The data getting excuted for the first time, the same data(just changed the description)is giving exceptions for the second
    time.
    Ideally you should not get an exception for the same data....can you tell is the description and where are you getting the exception...is it a part of the SOAP message or some object?
    An exception might have occured because the description would be something unacceptable by the target application.
    and different type of exceptions and solutions for the same
    there would be many blogs....your thread would be spammed...better make a search on SDN with exception text that you are getting.
    Regards,
    Abhishek.

  • Automatic Goods Issue in Outbound delivery scenario with resp to Shipment

    Hi,
    Could you please explain me, how  Automatic Goods Issue happens in Outbound delivery scenario process and in shipment process.
    Is there any transaction for this?
    Can we use VL23 for Automatic Goods Issue in Shipment process? or is it only for Outbound delivery scenario?
    How  we schedule a background job by using VL23- transaction, how we create variants on what selection criteria?
    Could you please explain me in detail?
    Thanks A lot.

    Hi Anil,
    VL23 is to schedule Out bound Goods issue.Check once T.code VL06O.
    Thanks,
    Sree.Manam

  • Automatic Goods Issue in Outbound delivery scenario with Shipment

    Hi,
    Could you please explain me how to Automatic Goods Issue happens in Outbound delivery scenario and in shipment process.
    Is there any transaction for this?
    Can we use VL23 for Automatic Goods Issue in Shipment process? or is it only for Outbound delivery scenario?
    How schedule a background job by using VL23- transaction, how we create variants on what selection criteria?
    Could you please explain me in detail?
    Thanks A lot.

    Hi Anil,
    VL23 is to schedule Out bound Goods issue.Check once T.code VL06O.
    Thanks,
    Sree.Manam

  • OATS Load Test - Wild Card

    Hi,
    Could anyone assist me with the following plz:
    We have a scenario in Load Testing where we run a test for users with exactly the same data on the input page.
    When we change the data & make it different for each user, the test falls over.
    Any thoughts, ideas, & assistance will be greatly appreciated.
    Rgds,
    Ben

    Hi Jean,
    Our application contains customised retail webcenter portal on which retail application is hosted.This portal application is not able to scale up more than 10 users.I had created portal application without the customised framework and then for a similar usecase it is able to scale upto more than 50 users but once it hits 100 VU mark it starts giving errors.If it were an issue with client tokens or login,I would have been able to have more than 1 user at a time.It seems to be an issue with custom framework developed on top of webcenter portal.I have faced a similar issue while testing for this app with jmeter also.I was able to test for the webcenter portal app without any customisation for more than 100 concurrent users. But I was not able to test for more than 1 user for customised retail webcenter portal
    Thanks,
    Ritesh
    Edited by: user766882 on Aug 21, 2012 8:25 AM
    Edited by: user766882 on Aug 21, 2012 8:33 AM

  • Unable to capture the Citrix network response time using OATS Load testing.

    Unable to capture the Citrix network response time using OATS Load testing. Here is the scenario " in our project users logs into Citrix network and select the Hyperion application and does the Transaction and the Clients wants us to simulate the same scenario for load testing. We have scripted starting from Citrix Login and then launching Hyperion application. But the time taken to launch the Hyperion Application from Citrix network has not been captured whereas Hyperion Transaction time have been recorded. Can any help to resolve this issue ASAP?

    Hi keerthi,
    1. I have pasted the code for the first issue
    web
                             .button(
                                       122,
                                       "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                             .click();
                        adf
                        .table(
                                  "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                        .columnSort("Ascending", "Name" );
         }

  • Load test SharePoint Online

    I'm putting in a critical solution for a company using SharePoint Online. It's pretty much out of the box, but the customer insists that a load-testing exercise takes place to ensure that when they go live with it, it will cope with their number of users
    without falling over or slowing down too much. Test cases are fairly simple: browse to the site, search, open a document, maybe occasionally edit a document or upload a new one. Usage will be fairly intense from their point of view but nothing that I can see
    SPO having any trouble with whatsoever. However I have to prove it.
    Has anyone found a load-testing application that will work with SharePoint Online? The test platform must run on local machines to simulate requests coming from the company, so cloud-based testing is out. I have been trying with VS2013 Ultimate, and have
    managed to get it to authenticate just one time, but mostly it refuses.
    An automated test tool would also be useful for future regression testing.

    The problem with "load testing" SPO is that you'll be throttled fairly quickly with a high load (similar to being throttled when attempting to migrate GBs of content to SPO). Since you cannot have any impact on the environment anyways, you would
    have to contact Microsoft if you encountered a performance issue, but load testing isn't going to be an accurate gauge of that.
    Trevor Seward
    Follow or contact me at...
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • VS Load Test : Unable to execute a 672 hour load test

    Hi Team,
    We keep running endurance tests for a very long time and today we tried to run a 28 day test (672 hours). However below ERROR keeps coming and we can not proceed with load test.
    Error occurred running test. Could not run load test <loadtestname> on agent <agentname>. Number must be either non negative and less than or equal to Int32.MaxValue or -1.
    Parameter Name : millisecondsTimout
    However, we are able to run a 590 hours load test. but problem is seen only we go around 600 something duration.
    Other Details:
    VS Version : 2012
    Rig Setup ? : No
    Run Type : Local Run
    Please let me know if you need any more details
    Thanks and Regards,
    Gaurav

    Hi Gaurav,
    According to your description, please you share me the load test error log.
    In addition, I suggest you try to create a yourself testsetting file and then add more time and then call the testsetting file run the load test check this issue again.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • ATS Load Testing and adf.view.rich.automation.ENABLED for ADF apps

    In oder to test ADF applications with Load Testing Module, is it required to set the adf.view.rich.automation.ENABLED clause to True in web.xml file or it's only for Functional testing?.
    Thanks,
    Carlos.

    Hey Carlos ^^
    You only need to set the web.xml for functional test script.
    JB

  • Synchronous File- Soap scenario with fault message

    Hi!
    I have a File to Soap synchronous scenario.
    All is right when no exception is returned by the web service.
    I want to use fault messages to catch thoses exceptions, so I have added fault message in message interfaces and in the mapping program in the interface mapping.
    Now, when the web service return an exception like :
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
       <soap-env:Body>
          <soap-env:Fault>
             <faultcode>soap-env:Client</faultcode>
             <faultstring xml:lang="en">NOT_CREATED</faultstring>
             <detail>
                <n0:Z_WS_CREATE_WAGON.Exception xmlns:n0="urn:sap-com:document:sap:rfc:functions">
                   <Name>NOT_CREATED</Name>
                   <Text> does not have packaging material type and is therefore not a pack.mat.</Text>
                   <Message>
                      <ID>HUSELECT</ID>
                      <Number>041</Number>
                   </Message>
                </n0:Z_WS_CREATE_WAGON.Exception>
             </detail>
          </soap-env:Fault>
       </soap-env:Body>
    </soap-env:Envelope>
    I get the following error :
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
       <SAP:Category>XIServer</SAP:Category>
       <SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
       <SAP:P1>http://www.arcelormittal.com/radis/rad IM_RAD_to_ZWsCreateWagon</SAP:P1>
       <SAP:P2 />
       <SAP:P3 />
       <SAP:P4 />
       <SAP:AdditionalText />
       <SAP:ApplicationFaultMessage namespace="" />
       <SAP:Stack>Interface mapping http://www.arcelormittal.com/radis/rad IM_RAD_to_ZWsCreateWagon does not exist in runtime cache</SAP:Stack>
       <SAP:Retry>N</SAP:Retry>
    </SAP:Error>
    My mapping program for fault message is well defined (I tested it with the exception message received from the web service).
    I have also refresh caches, but without success...
    Can anyone help me ?
    Thanks in advance,
    Laurence

    Hey Laurence,
    A File adapter is aysnchronous u cant use for synchrous because it cant acknwlodge the response it gets or itt sends.
    regarding two asynchoronus
    1. file to SOAP asychn.
    2. triggger the second one if SOAP has exception then pass the error from SOAP to New File.
    using BPM we have to use Transportion level acknowledgments
    please reward points if it helps
    Regards
    Sreeram.G.Reddy

  • How can i set different number of iterations for different scenario profiles that we add to "AutoPilot" in load testing of OATS

    Hi,
    I have few set of load test scenarios, I would like to add each of these test scenarios to "AutoPilot" and run each different scenario profile at different number of iterations.
    As in Oracle Load Testing the "Set Up AutoPilot" tab I see  a section like this "Iterations played by each user: ", which says run these many iterations for every virtual user of all profile added under "Submitted Profile Scenario". So is there any thing like that to set different iterations for every scenario profile added in Autopilot.
    Thanks in advance

    It's not a built-in feature to override a page's styles on a tab-by-tab or site-by-site basis, but perhaps someone has created an add-on for this?
    It also is possible to create style rules for particular sites and to apply them using either a userContent.css file or the Stylish extension. The Greasemonkey extension allows you to use JavaScript on a site-by-site basis, which provides further opportunity for customization. But these would take time and lots of testing to develop and perfect (and perfection might not be possible)...
    Regarding size, does the zoom feature help solve that part? In case you aren't familiar with the keyboard and mouse shortcuts for quickly changing the zoom level on a page, this article might be useful: [[Font size and zoom - increase the size of web pages]].

  • Need help with File to SOAP sync scenario: NO_BACK_SYSTEM_IN_HOPLIST

    Hello,
    I am setting up a new scenario where I get an XML file with PI, send that content via sync SOAP receiver call and direct the result of the web service response to SAP (just back to file as intermediate step).
    So far I have the transaction working to the SOAP adapter receiver request / response. I see the correct approval response coming in my SOAP channel (RWB AE payload), but this message gets stuck there before routing back to my receiver interface and mappings.
    General setup:
    FILE Sender to SYNC OB SI.
    OB SI Request is my source message type and Response is my final message output type.
    OM Source is this Sync OB SI. Target is a SOAP Sync IB SI. Request Mapping program matches the source file message type and target SOAP layout. Response Mapping matches SOAP response and Target is my final file layout.
    Routing for Sync OB SI ID uses this OM for Sync IB SI.
    SYNC IB SI has Request and REsponse messages mapping the external SOAP call.
    When I test the configuration I get success.
    When I send messages through I get error in the adapter about this NO_BACK_SYSTEM_IN_HOPLIST (therefore the response message is not making it back into the IE so that it can be mapped again and forwarded).
    Complete error message from RWB Adapter Log "Transmitting the message to endpoint http://[myhostname]:[myport]/sap/xi/engine?type=entry using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: NO_BACK_SYSTEM_IN_HOPLIST:." and the next line is "Received XI System Error. ErrorCode: NO_BACK_SYSTEM_IN_HOPLIST ErrorText: null ErrorStack: Legacy system to which acknowledgment message is to be sent is missing in hoplist (with wasread=false)"
    Any ideas for me? (fyi not using BPM).
    Regards, Aaron Myers

    Hi AAron,
    Looks like this problem has occured before. There are SAP Notes recommended. Below are some helpful links.
    http://scn.sap.com/thread/848913
    http://scn.sap.com/message/4659941#4659941
    Thanks,
    Divya.

  • SOAP RECEIVER SCENARIO PORT ISSUE

    Hi gurus,
    we are testing a proxy to soap synchron scenario and cannot get response from receiver. We have a firewall issue and need to open required ports.
    Which ports should we open? 50000? 80?
    Kind Regards,
    PM

    Hi Peter,
    SOAP communication uses HTTP protocol, so messages are transferred over 80 or 443 port by default, depending on whether you use HTTP or HTTPS communication, correspondingly.
    Hope this helps,
    Greg

  • ATS load testing for E-Business Suite using IE8 issue

    Hi,
    I am trying to record a load testing script using Oracle Application testing SUite for E-Business Suite R12.1.3 application. When I start recording I get a pop up asking me to change/disable XSS filter in IE8. I have altready done that and restarted the browser. But the same pop up message comes up.
    My queries are:
    1) Is ATS 9.3 supported for use with Internet Explorer 8? I am using Windows 7
    2) How can I overcome this issue so that I can records EBS script in openscript.
    I have run the runDiagnosis.bat file under openscript install folder and the output is as follows:
    10:40:17,892 INFO [Application] Log files stored in: C:\OracleATS\logs\odt
    10:40:17,905 INFO [DiagnosisExecutor] Starting diagnosis...
    10:40:17,908 INFO [DiagnosisExecutor] Log files for all diagnosis categories are stored in: "C:\OracleATS\logs\odt"
    10:40:18,105 INFO [DiagnosisExecutor] Environment Info - Date Tue Oct 11 10:40:17 BST 2011
    Windows Vista 6.1 , x86
    OpenScript
    Internet Explorer 8.0.7600.16385
    FireFox 7.0.1
    10:40:18,108 INFO [DiagnosisExecutor] Openscript install directory: C:\OracleATS\openScript
    10:40:18,117 DEBUG [DiagnosisExecutor] Diagnosing Oracle EBS/Forms Functional Testing - Forms FT Diagnoser
    10:40:18,532 ERROR [Forms FT Diagnoser] JInitiator was not found on the system.
    10:40:18,537 INFO [Installer] JRE option cache is available: false
    10:40:18,541 ERROR [Installer] Failed to backup JRE options! FormsFT helper installation will continue...
    java.io.FileNotFoundException: C:\Users\Rian\AppData\Roaming\Sun\Java\Deployment\deployment.properties (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.oats.scripting.modules.forms.common.utility.FileUtility.copyFile(FileUtility.java:26)
         at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatchImpl(Installer.java:119)
         at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatch(Installer.java:105)
         at oracle.oats.scripting.modules.forms.common.helperInstaller.WindowsInstaller.installJREPatch(WindowsInstaller.java:68)
         at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.doInstall(Installer.java:75)
         at oracle.oats.scripting.modules.formsFT.common.api.internal.helperInstaller.InstallerManager.doInstall(InstallerManager.java:130)
         at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.checkFormFTHelperInstallation(FormsFTDiagnoser.java:141)
         at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.diagnose(FormsFTDiagnoser.java:50)
         at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:146)
         at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:90)
         at oracle.oats.scripting.diagnosisTool.Application.runSilently(Application.java:191)
         at oracle.oats.scripting.diagnosisTool.Application.run(Application.java:90)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.eclipse.equinox.internal.app.EclipseAppContainer.callMethodWithException(EclipseAppContainer.java:574)
         at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:195)
         at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
         at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
         at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
         at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
         at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
         at org.eclipse.core.launcher.Main.main(Main.java:30)
    10:40:22,867 WARN [Installer] FormsFT Helper is installed without cache
    java.io.FileNotFoundException: C:\Users\Rian\AppData\Roaming\Sun\Java\Deployment\deployment.properties (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.oats.scripting.modules.forms.common.utility.FileUtility.copyFile(FileUtility.java:26)
         at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatchImpl(Installer.java:193)
         at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatch(Installer.java:105)
         at oracle.oats.scripting.modules.forms.common.helperInstaller.WindowsInstaller.installJREPatch(WindowsInstaller.java:68)
         at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.doInstall(Installer.java:75)
         at oracle.oats.scripting.modules.formsFT.common.api.internal.helperInstaller.InstallerManager.doInstall(InstallerManager.java:130)
         at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.checkFormFTHelperInstallation(FormsFTDiagnoser.java:141)
         at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.diagnose(FormsFTDiagnoser.java:50)
         at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:146)
         at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:90)
         at oracle.oats.scripting.diagnosisTool.Application.runSilently(Application.java:191)
         at oracle.oats.scripting.diagnosisTool.Application.run(Application.java:90)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.eclipse.equinox.internal.app.EclipseAppContainer.callMethodWithException(EclipseAppContainer.java:574)
         at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:195)
         at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
         at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
         at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
         at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
         at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
         at org.eclipse.core.launcher.Main.main(Main.java:30)
    10:40:22,936 INFO [Installer] JRE option cache is available: false
    10:40:24,044 DEBUG [DiagnosisExecutor] Diagnosed Oracle EBS/Forms Functional Testing - Forms FT Diagnoser. Analyzing results.
    10:40:24,063 DEBUG [DiagnosisExecutor] Diagnosing Sun JRE Version 1.6.0_24
    10:40:24,077 DEBUG [DiagnosisExecutor] Diagnosing Forms FT Helper Installation
    10:40:24,080 DEBUG [DiagnosisExecutor] Diagnosing Web Functional Testing - IE Helper
    10:40:24,238 INFO [IEBhoUtil] DotNet Framework found. Version is 4.0.30319
    10:40:24,404 INFO [RunCommand] [Cmd execute] cmd.exe /C C:\Windows\Microsoft.NET\Framework\v4.0.30319\regasm.exe
    10:40:26,187 INFO [IEBhoUtil] DotNet Framework works well.
    10:40:26,318 INFO [IEBhoUtil] OpenScript IE Toolbar/BHO is found.
    10:40:26,458 INFO [RunCommand] [Cmd execute] cmd.exe /C "C:\OracleATS\openScript\Oracle IE ToolBar\OpenScriptToolBar.exe"
    10:40:27,357 ERROR [IEBhoUtil] Run Oracle IE Toolbar error:Attempted to perform an unauthorized operation.
    10:40:27,594 INFO [IEBhoUtil] IE Enhanced Security Administrator Setting: null
    10:40:27,675 INFO [IEBhoUtil] IE Enhanced Security Users Setting: null
    10:40:27,677 INFO [IEBhoUtil] IE Enhanced Security Settings Disabled
    10:40:27,681 DEBUG [DiagnosisExecutor] Diagnosed Web Functional Testing - IE Helper. Analyzing results.
    10:40:27,683 DEBUG [DiagnosisExecutor] Diagnosing .NET Framework
    10:40:27,685 DEBUG [DiagnosisExecutor] Diagnosing IE Helper Installation
    10:40:27,686 DEBUG [DiagnosisExecutor] Diagnosing IE Helper Accessibility
    10:40:27,687 ERROR [DiagnosisExecutor] Failure found when diagnosing Web Functional Testing IE Helper
    10:40:27,689 DEBUG [DiagnosisExecutor] Trying to fix IE Helper Accessibility
    10:40:27,691 INFO [IE Helper] Try to fix an issue: IE Helper Accessibility
    10:40:27,860 INFO [IEBhoUtil] OpenScript IE BHO/Toolbar has been enabled.
    10:40:27,864 INFO [DiagnosisExecutor] Auto-fixed IE Helper Accessibility
    10:40:27,866 DEBUG [DiagnosisExecutor] Diagnosing IE Helper Conflict
    10:40:27,869 DEBUG [DiagnosisExecutor] Diagnosing IE Zoom Factor
    10:40:27,871 DEBUG [DiagnosisExecutor] Diagnosing IE Enhanced Security Setting
    10:40:27,982 DEBUG [DiagnosisExecutor] Diagnosing Web Functional Testing - Firefox Helper
    10:40:28,076 INFO [FFExtUtil] OpenScript WebDom Firefox extension is already installed.
    10:40:28,156 INFO [FFExtUtil] OpenScript WebDom Add-on is compatible with the installed Firefox 7.0.1
    10:40:28,174 INFO [FFExtUtil] Firefox profiles are found.
    10:40:28,179 INFO [FFExtUtil] Firefox profiles are found.
    10:40:28,182 DEBUG [DiagnosisExecutor] Diagnosed Web Functional Testing - Firefox Helper. Analyzing results.
    10:40:28,191 DEBUG [DiagnosisExecutor] Diagnosing Firefox Helper Installation
    10:40:28,193 DEBUG [DiagnosisExecutor] Diagnosing Firefox Version
    10:40:28,199 DEBUG [DiagnosisExecutor] Diagnosing Firefox Helper Accessibility
    10:40:28,201 DEBUG [DiagnosisExecutor] Diagnosing Reset Firefox content preferences.
    10:40:28,207 DEBUG [DiagnosisExecutor] Diagnosing Operating System - WebDom Platform Diagnosor
    10:40:30,798 DEBUG [DiagnosisExecutor] Diagnosed Operating System - WebDom Platform Diagnosor. Analyzing results.
    10:40:30,801 DEBUG [DiagnosisExecutor] Diagnosing Environment Variables
    10:40:30,803 DEBUG [DiagnosisExecutor] Diagnosing IE Toolbar/BHO Remover
    10:40:30,806 DEBUG [DiagnosisExecutor] Diagnosing Oracle EBS/Forms Load Testing - Forms LT Diagnoser
    10:40:31,647 DEBUG [Forms LT Diagnoser] Proxy settings for Sun Java 1.5 and higher are set correctly to "Use Browser Settings". Proxy settings for older versions of Sun Java and JInitiator should be manually verified.
    10:40:31,650 DEBUG [DiagnosisExecutor] Diagnosed Oracle EBS/Forms Load Testing - Forms LT Diagnoser. Analyzing results.
    10:40:31,654 DEBUG [DiagnosisExecutor] Diagnosing IE8 XSS Security Settings
    10:40:31,655 ERROR [DiagnosisExecutor] Failure found when diagnosing Oracle EBS/Forms Load Testing Forms LT Diagnoser
    10:40:31,659 DEBUG [DiagnosisExecutor] Trying to fix IE8 XSS Security Settings
    10:40:31,671 ERROR [DiagnosisExecutor] Did not auto-fix the problem.
    10:40:31,674 ERROR [DiagnosisExecutor] Suggestion for fixing: Local intranet: XSS Filter is disabled
    Trusted sites: XSS Filter is enabled
    Internet: XSS Filter is disabled
    Restricted sites: XSS Filter is enabled
    To Change setting:
    Go to Tools > Internet Options and Choose Security Tab
    Select the Zone to modify and Press Custom level
    Find Enable XSS filter Setting - Select Disable and click Ok
    10:40:31,680 DEBUG [DiagnosisExecutor] Diagnosing Sun Java proxy settings
    10:40:31,683 DEBUG [DiagnosisExecutor] Diagnosing Helper Service - Helper Service
    10:40:32,282 DEBUG [DiagnosisExecutor] Diagnosed Helper Service - Helper Service. Analyzing results.
    10:40:32,284 DEBUG [DiagnosisExecutor] Diagnosing Helper Service Installation
    10:40:32,287 DEBUG [DiagnosisExecutor] Diagnosing Helper Service Status
    10:40:32,289 DEBUG [DiagnosisExecutor] Diagnosing Helper Service Connection
    10:40:32,612 DEBUG [DiagnosisExecutor] No Eclipse configuration .log file available.
    10:40:32,774 INFO [DiagnosisExecutor] Diagnosis Complete.
    Please advise.
    regards
    CP

    Hello
    1/ ATS 9.3 is supported with IE8, not IE9 at the moment
    2/ Did you disable xss settings for the four different security zones?
    You can also try to add the EBS url to the trusted sites and disable xss settings for that zone only.
    Let us know and good luck
    JB

Maybe you are looking for