Issue in using QT library

Hi
I am new to QT development.
I am trying to write an application with QT 5.0 and when i make a call to GetMoviePropertyAtom(), the container returned to me is NULL.
The 'movie' that was sent as an input parameter was created using NewMovieFromFile().
My aim is to change the path(reference) to the main media embedded in the QT file.
Please advise.
Thanks
Deva

i think you have to use guided navigation for this. create two reports first is the one you are having currently and second is the one in which remove the presentation variable from the column formula. i.e. the same report with no aggregation applied.
Now create a dummy report and make it return value only when the presentation variable value is not equal to max or min. guide the report to navigate between the first and second report based on the result of the dummy report.

Similar Messages

Issues with using my iPhoto library on my external hard drive. Very slow to open and pictures disappear in thumbnail view.

I have recently transferred my iPhoto Library to my external hard drive (WD MyBook Live) and have some questions. Since I have done this and used the "alt + option" to select it as my default library I have been having some issues. When using the library on the external drive as my default drive it takes a very long time to load compared to when it was on my macbook's hard drive. Is this normal? Also, once it does load the thumbnails are only viewable when scrolling quickly through the photos and they are very blurry. However, if I were to select one randomly (because of this problem I have no way of knowing which one I'm selecting) it brings it up in the edit view and it is a crystal clear picture.
Is there a way to fix these issues? I'd love to be able to use the iPhoto Library off the external drive to free up space on my macbook but if it isn't going to work as streamlined as it would on my macbook hard drive. I have not yet deleted the original iPhoto Library from my macbook because I did not want to do so until I knew the new iPhoto library on the external drive was working properly. Does this make a difference?
Please help!

The problem lies with occasional dropouts that can corrupt the library's database files if they are being written to as the time of dropout. It's the nature of wireless networks. If you have a very strong signal throughout and are willing to take a chance then go for it.
But as for the speed, it must be iPhoto 11 and it's complexity causing the slowness. I had tried using a library on an EHD connected to my iMac from my laptop wirelessly with iPhoto 7 or 8 and it was pretty fast. I think it was 7 before faces and places came into being.
Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html to improve wireless performance, etc.
OT

I to use iphoto library manager to save corrupted iphoto and each time it saves some and the first time it brings up iphoto, iphone goes into "not responding" mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2.

I've had issues with my iPhoto "not responding" and as a result I am attempting to save my photos to an external hard drive using iPhoto library Manager but each time I start the program it saves some, and then when it starts iPhoto, iPhoto then goes into not responding mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2. I have completed all of the photo library first aid steps several times, but it makes no difference, iphoto eventually goes to "not responding." Initial issues started with Time Machine back ups stopping because of iphoto. Thanks......

Do you have a back up?
If you're just trying to recover the photos you can do that much more simply:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Originals' or 'Masters'. (varies according to the version of iPhoto)
Your photos are inside - these are the originals as imported from your camera.

How to use Call library function node for a function in dll with VOID data type

Hi All,
I would like to ask for your kind help,
I am facing an issue with the call library node.
I have a C++ function(stdcall), which has void as data type
error code XXXX(hwnd, lID, getValue, *void data1, *void data2)
the data1 and data2 types are always changing depending upoin the value of "getValue".
Primarily i can use call library node multiple times and adapt each node according to the data types of data1 and data2, and extract the values and use in the code. Here is no issue. Real question is:
My question:
How can i just use one time call library node and make a case depending upon the "getvalue", which will control the data type of data1 and data2. Here i really looking for solutions.
My trials:
i used varaints as input to the call libray node for data1 and data2, and selected Parameters in call libraby node as " Adapt to type". here labview just crashed.
i really appreciate your feedbackand suggestions.
Thanks
Kutbuddin
Solved!
Go to Solution.
Attachments:
Clipboard02.jpg ‏103 KB

A variant is a very specific LabVIEW datatype (really a C++ type object internally) and trying to pass that to a function, which excepts a flat memory pointer there, for sure will crash very quickly.
As to endianess, yes Unflatten will be able to adjust for endianess, which in this case however is most likely exectly NOT what you want. So make sure that the you select native type for the endianess input on Unflatten from String. LabVIEW internally works with whatever is the native endianess, as will most likely your C++ DLL. The platform independent big endian format does only come into play when you receive data streams over some streaming interface like a network connection. Here it is desirable to use an endian format that is independent from the actual platform that generates and consumes the data stream. LabVIEWs default endianes is big endian here.
But as long as you pass data directly to native components like DLLs there is no difference in endianess between what LabVIEW uses and what those components use.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Using External Library in a DC problem (SP16)

Hi,
I've been trying to get the example that Valery is outlining in his <a href="/people/valery.silaev/blog/2005/09/14/a-bit-of-impractical-scripting-for-web-dynpro">Blog</a>.
I've done it exactly as Valery says, but I can't get it to work. I create the External Library DC, add the jar to Public Part (purpose Assembly) and build. Builds ok.
I then proceed to creating the J2EE Library. It is created ok. I then add the External Lib I just created to Used DCs. This goes ok. I build the DC. There are warnings:
Warning: Warning: Source folder does not exist, will be ignored: server
Plugin initialized in 0.03 seconds
Warning: No runtime information available for development component type External Library (sap.com), cannot validate runtime dependency.
And:
createDeployArchive:
     [mkdir] Created dir: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\t\C2CEFADCC9470A9F87865E9894AAE426\sdaprep
       [cda] Creating descriptor server/provider.xml ...
       [cda] WARNING: Ignoring invalid runtime dependency on js/jars (orion.com), type External Library
I've tried nearly every combination of Dependency Types When adding the used DC to J2EE DC. The jar never ends up in the SDA file in gen\default\deploy or jar in gen\default\public. I only get different types of warnings.
Here is the whole build.log:
Apr 7, 2006 8:48:00 AM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] WARNING: js/lib: built with warnings orion.com/js/lib(MyComponents) in variant "default" (0.753 sec) :
Build log -
Development Component Build (2006-04-07 08:48:00)
Component name: js/lib
Component vendor: orion.com
SC compartment: MyComponents
Configuration: LocalDevelopment
Location: local
Source code location: jarpak@UFIES-JARPAK
DC root folder: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\DCs\orion.com\js\lib\_comp\
DC type: J2EE Server Component
DC subtype: Library
Host: UFIES-JARPAK
DC Model check:
          [dcmake] All used DCs are available locally
          [dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/addLib"
          [dcmake] validating dependency to public part "Tokenizer" of DC "orion.com/js/jars"
          [dcmake] DC model check OK
Start build plugin:
          [dcmake] using build plugin: sap.com/tc/bi/bp/addLib
          [dcmake] starting build plugin from : C:\Program Files\SAP\JDT\eclipse\plugins\com.sap.tc.ap\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\addLib\_comp\gen\default\public\addLib\
Build Plugin 'J2EE Library', Version 6.40 SP 16 (630_VAL_REL, built on 2006-02-13 00:17:07 CET)
   development component: js/lib (orion.com)
      software component: MyComponents (demo.sap.com)
                location: local
                    type: J2EE Server Component, subtype Library
           build variant: default
         source location: jarpak@UFIES-JARPAK
       plugin start time: 2006-04-07 08:48:00 GMT+02:00 (EEST)
                 Java VM: Java HotSpot(TM) Client VM, 1.4.2_03-b02 (Sun Microsystems Inc.)
General options:
convert *.xlf to *.properties: yes
include sources for debugging: yes
Warning: Warning: Source folder does not exist, will be ignored: server
Plugin initialized in 0.03 seconds
Warning: No runtime information available for development component type External Library (sap.com), cannot validate runtime dependency.
Preparing data context..
No 'default' JDK defined, will use running VM.
Data context prepared in 0 seconds
Executing macro file..
Using macro file:     C:\Program Files\SAP\JDT\eclipse\plugins\com.sap.tc.ap\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\addLib\_comp\gen\default\public\addLib\macros\build.vm
Creating output file: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\DCs\orion.com\js\lib\_comp\gen\default\logs\build.xml
Macro file executed in 0.482 seconds
Starting Ant..
Using build file:     C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\DCs\orion.com\js\lib\_comp\gen\default\logs\build.xml
Using build target:   build
Generation folder:    C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\t\C2CEFADCC9470A9F87865E9894AAE426
Using Ant version:    1.5.4
prepare:
     [mkdir] Created dir: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\DCs\orion.com\js\lib\_comp\gen\default\deploy
     [mkdir] Created dir: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\t\C2CEFADCC9470A9F87865E9894AAE426\int-pp
     [mkdir] Created dir: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\t\C2CEFADCC9470A9F87865E9894AAE426\sda
compile:
createPublicParts:
createDeployArchive:
     [mkdir] Created dir: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\t\C2CEFADCC9470A9F87865E9894AAE426\sdaprep
       [cda] Creating descriptor server/provider.xml ...
       [cda] WARNING: Ignoring invalid runtime dependency on js/jars (orion.com), type External Library
packDeployArchive:
[srcpacker] Creating source archive
[srcpacker] No sources available for packing, no archive will be created.
     [timer] Source archive creation finished in 0.02 seconds
    [jarsap] Info: JarSAP version 20041217.1600
    [jarsap] Info: JarSAPProcessing version 20060104.1634 / JarSL version 20060106.1831
    [jarsap] Property jarsap.info.dir is not set.
    [jarsap] Building: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\DCs\orion.com\js\lib\_comp\gen\default\deploy\orion.comjslib.sda with compression
     [timer] JarSAP finished in 0.03 seconds
build:
Ant runtime 0.161 seconds
Ant build finished with WARNINGS
Build plugin finished at 2006-04-07 08:48:00 GMT+02:00 (EEST)
Total build plugin runtime: 0.693 seconds
Build finished with WARNING
What am I doing wrong ?
Kind Regards,
Jari Pakarinen

Hi,
There is an issue with SP16 in using External library DC.
Go through this Jars not included in J2EE Library DC SDA. This thread deals with the same issue.
Hope this helps.
Regards,
Rathna.

Plugin issue after using SignPlugin and Reader-enabling

Hi all,
I would like to ask for a help with plugin that we have developed for Adobe Reader.
We are running into an issue with the plug-in and I was hoping that you can help me out. It looks like plug-in works perfectly in the Acrobat but we have an issue with getting it to work with Reader as described below. I would greatly appreciate your help.
We have a problem with plugin after signing it using RIKLA certificate provided by Adobe and Reader-enabling.
Our plugin has been developed to allow users to sign PDF XML data from Reader user interface using custom library (sign library) and msxml3.dll library ( to transform PDF form XML into custom XML format). Plugin target is Adobe Reader 9 and it has been tested using Adobe Acrobat 9 earlier. Recently we received RIKLA certification key and after we tried to sign plugin and use it in Reader we started to have problems.
Plug-in, compiled directly from source code and installed in Adobe Acrobat 9 is working correctly. We haven’t experienced any issues and everything seems to be working properly.
The same plug-in signed using SignPlugin tools from Acrobat SDK 9.1 (command SignPlugin -kp keypairFileName -cf Reader_Integrated_Key_FileName MyPlugin.api) and RIKLA key is not working correctly in Adobe Reader 9.
The problem appears when plugin is trying to access external library msxml3.dll and execute createProcessor() function. The same function work properly in Adobe Acrobat 9 before sing plug-in with RIKLA key.
Below there is fragment with code that doesn’t work in Adobe Reader after reader-enabling but works in Adobe Acrobat.
Plug-in crushes in line pProcessor = pTemplate->createProcessor();.
try{
pProcessor = pTemplate->createProcessor();
} catch(_com_error &e) {
printf("Error setting XSL style sheet : %s\n",
         (const char*)_bstr_t(e.Description()));
AVAlertNote("Error setting XSL style sheet");
AVAlertNote(e.Description());
exit(-1);
Code that we use in catch() block lets us know that error source is “msxml3.dll” library.
As we have discovered problem occurs only after Reader-enabling .api plugin file. Clear compiled .api file works properly in Adobe Acrobat 9 without any problems.
We would like to know if you have experienced any similar issues? If yes, what have caused them?
Why same plugin is working in Acrobat 9 before signing and after signing using provided certificate it stops working?
Are there any restrictions of using external libraries in Reader that are not working there, and these restrictions are not obeyed in Acrobat?
Any help would be greatly appreciated.

Hi Irosent,
Is there a way that Acrobat and Reader differentiate between library initialization?
Would it be useful if I place any part of code or project configuration for you so maybe you will be able to help?
Libraries that we use (our own dll files) we place in windows/system32 folder (there also exists msxml3.dll file that we use).
Here are preprocessor definitions that we have defined:
_AFXDLL
_USERDLL
READER_PLUGIN
NDEBUG
WIN_PLATFORM
WIN32
_WINDOWS
WIN_ENV
ACRO_SDK_LEVEL=0x00090000
As for library msxml3.dll that we use in code we have:
#import <msxml3.dll> named_guids
using namespace MSXML2;
MSXML2::IXMLDOMDocumentPtr
          pXml(MSXML2::CLSID_DOMDocument);
MSXML2::IXMLDOMDocumentPtr
          pXslt(CLSID_FreeThreadedDOMDocument);
IXSLTemplatePtr pTemplate(CLSID_XSLTemplate);
IXSLProcessorPtr pProcessor;
Later there is a part of code that I have posted in first post and where plugin crashes.
I would really appreciate your help.

Cannot access iphoto: Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5

Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5 or 6 times already and end up with the same result. NOTHING...
Library Upgrader IS NOT WORKING. Please help

Thx Leonie,
Surprisingly, I just went to the crash reporter and there were no reports re: the iPhoto issue. This is the only report I found, which I not sure is related to the iPhoto issue:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>OSBuild</key>
<string>10.10.2:14C109</string>
<key>appRecords</key>
<array>
<array>
<string>AppRecord</string>
<string>DiskImageMounter</string>
<string>com.apple.DiskImageMounter</string>
<string>396</string>
<string>10.10.1</string>
<integer>7</integer>
<integer>0</integer>
<integer>1</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
</array>
<array>
<string>AppRecord</string>
<string>com.apple.ncplugin.weather</string>
<string>com.apple.ncplugin.weather</string>
<string>32.3</string>
<string>1.0</string>
As for the TimeCapsule indeed, I use it as an extended drive but I'm surprised it would be considered a FAT-32 formatted drive as this is an Apple device.
I asked the apple reps if I could use the TimeCapsule for such purpose and no one raised a concern. It's also surprising that I didn't have an issue with this prior to the upgrade to OS X Yosemite.
Having said the above, thank you for your help - if the TimeCapsule is indeed the issue, perhaps I can solve the issue by transferring the iphoto library to an OS extended hard drive.

Problem while using cewolf library with jsf jboss.

Hi Guys,
I am trying to use cewolf library to generate graphs in my web application based on jsf. But I am getting the following exception.
I have pointed down that cewolf. jar file is causing the problem.
javax.servlet.ServletException: #{LoginBean.validateUser}: javax.faces.el.EvaluationException: javax.ejb.NoSuchObjectLocalException: Object Not Found ; CausedByException is:
     Receive timed out
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:209)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
root cause
javax.faces.FacesException: #{LoginBean.validateUser}: javax.faces.el.EvaluationException: javax.ejb.NoSuchObjectLocalException: Object Not Found ; CausedByException is:
     Receive timed out
     com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:78)
     javax.faces.component.UICommand.broadcast(UICommand.java:312)
     javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
     javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
     com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
And this login pages does not at all uses the cewolf library.

Hello, Reena
Your process flow seems to be correct in term of getting/freeing memory.
Following error
The problem occurs after executing the procedure for 5000 records and I get the error
ORA-04031: unable to allocate 4176 bytes of shared memory ("shared pool","unknown object","sga
heap","library cache")may be caused by memory leaks in xdk or memory fragmentation(due to get/free memory cycle)
To find out if this is an memory leak issue you could try to monitor V$SGASTAT from one session while running your batch process in another session.
To prevent (or lower its impact) fragmentation issues try to PIN objects, and adjust java_pool_size and shared_pool_reserved_size.
Anyway, counsult your Oracle DBA.
Oracle version 8.1.7.0.0I think, you should apply database patch first of all. The latest one (8.1.7.4.x) could be accured from Metalink.

Issue while using SUBPARTITION clause in the MERGE statement in PLSQL Code

Hello All,
I am using the below code to update specific sub-partition data using oracle merge statements.
I am getting the sub-partition name and passing this as a string to the sub-partition clause.
The Merge statement is failing stating that the specified sub-partition does not exist. But the sub-partition do exists for the table.
We are using Oracle 11gr2 database.
Below is the code which I am using to populate the data.
declare
ln_min_batchkey PLS_INTEGER;
ln_max_batchkey PLS_INTEGER;
lv_partition_name VARCHAR2 (32767);
lv_subpartition_name VARCHAR2 (32767);
begin
FOR m1 IN ( SELECT (year_val + 1) AS year_val, year_val AS orig_year_val
FROM ( SELECT DISTINCT
TO_CHAR (batch_create_dt, 'YYYY') year_val
FROM stores_comm_mob_sub_temp
ORDER BY 1)
ORDER BY year_val)
LOOP
lv_partition_name :=
scmsa_handset_mobility_data_build.fn_get_partition_name (
p_table_name => 'STORES_COMM_MOB_SUB_INFO',
p_search_string => m1.year_val);
FOR m2
IN (SELECT DISTINCT
'M' || TO_CHAR (batch_create_dt, 'MM') AS month_val
FROM stores_comm_mob_sub_temp
WHERE TO_CHAR (batch_create_dt, 'YYYY') = m1.orig_year_val)
LOOP
lv_subpartition_name :=
scmsa_handset_mobility_data_build.fn_get_subpartition_name (
p_table_name => 'STORES_COMM_MOB_SUB_INFO',
p_partition_name => lv_partition_name,
p_search_string => m2.month_val);
                    DBMS_OUTPUT.PUT_LINE('The lv_subpartition_name => '||lv_subpartition_name||' and lv_partition_name=> '||lv_partition_name);
IF lv_subpartition_name IS NULL
THEN
                         DBMS_OUTPUT.PUT_LINE('INSIDE IF => '||m2.month_val);
INSERT INTO STORES_COMM_MOB_SUB_INFO T1 (
t1.ntlogin,
t1.first_name,
t1.last_name,
t1.job_title,
t1.store_id,
t1.batch_create_dt)
SELECT t2.ntlogin,
t2.first_name,
t2.last_name,
t2.job_title,
t2.store_id,
t2.batch_create_dt
FROM stores_comm_mob_sub_temp t2
WHERE TO_CHAR (batch_create_dt, 'YYYY') = m1.orig_year_val
AND 'M' || TO_CHAR (batch_create_dt, 'MM') =
m2.month_val;
ELSIF lv_subpartition_name IS NOT NULL
THEN
                    DBMS_OUTPUT.PUT_LINE('INSIDE ELSIF => '||m2.month_val);
MERGE INTO (SELECT *
FROM stores_comm_mob_sub_info
SUBPARTITION (lv_subpartition_name)) T1 --> Issue Here
USING (SELECT *
FROM stores_comm_mob_sub_temp
WHERE TO_CHAR (batch_create_dt, 'YYYY') =
m1.orig_year_val
AND 'M' || TO_CHAR (batch_create_dt, 'MM') =
m2.month_val) T2
ON (T1.store_id = T2.store_id
AND T1.ntlogin = T2.ntlogin)
WHEN MATCHED
THEN
UPDATE SET
t1.postpaid_totalqty =
(NVL (t1.postpaid_totalqty, 0)
+ NVL (t2.postpaid_totalqty, 0)),
t1.sales_transaction_dt =
GREATEST (
NVL (t1.sales_transaction_dt,
t2.sales_transaction_dt),
NVL (t2.sales_transaction_dt,
t1.sales_transaction_dt)),
t1.batch_create_dt =
GREATEST (
NVL (t1.batch_create_dt, t2.batch_create_dt),
NVL (t2.batch_create_dt, t1.batch_create_dt))
WHEN NOT MATCHED
THEN
INSERT (t1.ntlogin,
t1.first_name,
t1.last_name,
t1.job_title,
t1.store_id,
t1.batch_create_dt)
VALUES (t2.ntlogin,
t2.first_name,
t2.last_name,
t2.job_title,
t2.store_id,
t2.batch_create_dt);
END IF;
END LOOP;
END LOOP;
COMMIT;
end;
Much appreciate your inputs here.
Thanks,
MK.
(SORRY TO POST THE SAME QUESTION TWICE).
Edited by: Maddy on May 23, 2013 10:20 PM

Duplicate question

Issue in using presentation variable as filter condition in the reports

Hi,
I have an issue in using presentation variable as filter condition in my reports the details are as follows:
Details :
We want to implement the Max and Min variables through Presentation variables only.we do not want to implement it through session variables in this case.
We have two variables MIN and MAX to be used as Presentation Variables,for a column of the report (which is a quantity),so that the user wants to see the data for this column within a particular range.i.e the Min and the Max.This part has been implemented well . The issue is when the user wants to see the full data.In that case we will not pass any values to these two Presentation Variable or in other words we are not restricting the report data so we are not passing any value to the variables,this is when the report is throwing the error. we want to leave this variables blank in that case.but this is giving error.
Please suggest how can I overcome this issue.
Thanks in Advance.
Regards,
Praveen

i think you have to use guided navigation for this. create two reports first is the one you are having currently and second is the one in which remove the presentation variable from the column formula. i.e. the same report with no aggregation applied.
Now create a dummy report and make it return value only when the presentation variable value is not equal to max or min. guide the report to navigate between the first and second report based on the result of the dummy report.

Any issues with using LDAP on LINUX for GRC 5.2 UME?

Our company is converting our LDAP servers from AIX to LINUX. The DNS name used in our UME connection should not change. Are there any issues with using LDAP on LINUX? We are currently on GRC 5.2 SP9 (in the middle of upgrading to SP12).
Also, I have been trying to connect our test UME system to a test LDAP box that has already been converted to LINUX but keep getting a 'connection failed' error when I try to test it.
Do you have to reboot the server to test changing the LDAP connections? I've been trying it by going into UME, pulling up the LDAP tab, hitting the Modify button, entering the new userid and password for test LDAP, and hitting the Test Connection button. I've verified that this userid and password is correct for test LDAP.
Is there a way to get more information about why the connection failed?
Thanks.

I've been told by our LDAP Support group that none of the other configuration settings should have to be changed. I should only have to change the id and password to connect to a test version of LDAP instead of our regular connection to the production LDAP.
Can you test a connection for a different userid/password without having to reboot/restart the server? Do I need to change these two settings, save then, reboot/restart, and then do the Test Connection button?
Thanks.

Issues with using relative links in Captivate 8

Is anyone else having issues with using relative links in Captivate 8? These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the situation... We have courses that are made up of multiple lessons which as separate Captivate files. Within those lessons are buttons to link to external documents (which live in a shared document folder), demonstrations, etc. We use relative links because we post these to our amazon servers and we also sell them to clients where they can post them on their own web servers or in their LMS. SO we can't put in full paths for the links or we'd have to change them constantly. So an example is that the link for a button might be "../Document/nameofdoc.pdf" This would be going to a user guide or something that is posted in the "Document" folder that lives at the same level as the lesson's folder. But now, all of the sudden, none of our bazillion links is working. And I've tried buttons, hyperlinks, and even the old click box. Nothing works with relative links. And I did check the permissions on every file and folder on our Amazon server to verify nothing changed there as well. Any suggestions?

I have the same issue with relative links using Captivate 8. I am trying to load Captivate modules into an LMS using relative links to document files within the LMS. The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
Help?

Issues with using the output redirection character with newer NXOS versions?

Has anyone seen any issues with using the output redirection character with newer NXOS versions?
Am receiving "Error 0x40870004 while copying."
Simply copying a file from bootflash to tftp is ok.
This occurs for both 3CDaemon and Tftpd32 softwares.
Have tried it on multiple switches - same issue.
Any known bugs?
thanks!
The following is an example of bad (NXOS4.1.1b) and good (SANOS3.2.1a)
MDS2# sho ver | inc system
system:    version 4.1(1b)
system image file is:    bootflash:///m9200-s2ek9-mz.4.1.1b.bin
system compile time:     10/7/2008 13:00:00 [10/11/2008 09:52:55]
MDS2# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
TFTP put operation failed:Access violation
Error 0x40870004 while copying tftp://10.73.54.194/
MDS2# copy bootflash:cpu_logfile tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP put operation was successful
MDS2#
ck-ci9216-001# sho ver | inc system
system:    version 3.2(1a)
system image file is:    bootflash:/m9200-ek9-mz.3.2.1a.bin
system compile time:     9/25/2007 18:00:00 [10/06/2007 06:46:51]
ck-ci9216-001# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
|
TFTP put operation was successful

Please check with new version of TFTPD 32 server. The error may be due to older version of TFPT server, the new version available solved this error. Files are getting uploaded with no issues.
1. Download tftpd32b.zip from:
http://tftpd32.jounin.net/tftpd32_download.html
2. Copy the tftpd32b.zip file into an empty directory and extract it.
3. Copy the file you want to transver into the directory containing tftpd32.exe.
4. Run tftpd32.exe from that directory. The "Base Directory" field should show the path to the directory containing the file you want to transfer.
At this point, the tftpserver is ready to begin serving files. As devices request files, the main tftpd32 window will log the requests.
Best Regards...

I have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

Chris, I believe this link may have the information you're looking for. Welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300432

Can I move my iTunes music to a device with a different Apple ID using iTunes library on desktop?

I'm going to be getting a new iPhone real soon and I'm going to create a new Apple ID. The one that I'm currently using now will be handed over to another with respected agreements. I was just wondering if I could still move the music purchases with this ID to my phone that will have a different one using iTunes library on desktop.
Possible?
Any help would be greatly appreciated. No "yeah, I have this problem too" posts because that is completely unhelpful, thank you.

You can move the song files into a different iTunes library and sync them to a new device, but they will remain associated with the original Apple ID.
(109462)

Issue in using QT library

Similar Messages

Maybe you are looking for