Issue in WS based on FM with data declared as TABLES

Dear all,
I created enterprise WS with endpoint as function module. The FM has a date declared as TABLES. I see the table data under Output section of External and Internal view in SE80. Also the data is being exposed (check box set). However if I consume the WS either via ABAP consumer proxy or externally outside the SAP system (from JAVA app) the data which is declared as TABLES is not visible in RESPONSE from the WS.
Is this behavior feature? Shall I always declare (in case of custom FM) all the data as EXPORTING?
If so what about the SAP standard FMs? In this case do I need to always create custom Z* FM as wrapper?
thanks
m./

Please re-post if this is still an issue to the Business Objects Forum or purchase a case and have a dedicated support engineer work with you directly

Similar Messages

Work with data from a table of another SAP R/3 system

Hi,
I want to work with data from a table of another system. I know there's a function called 'RFC_READ_TABLE' but I don't know really how it works. What I want to do is to get data from that system and pass it to the one where I'm working in order I can continue working with this data in the report.
Besides, I'd like to select only the records that have some conditions.
I'd appreciate if someone could tell how to do it, whether with FM 'RFC_READ_TABLE' or in another way.
Thanks in advance,
Gerard
P.S: The systems are already connected in SM59

Yes, you can use RFC_read_table .You can pass the number of columns but I recommend you to bring all results in your internal table after that you can filter the records. Most of the time I have notice when you make RFC call with this FM to another system it works but it may also happen that other system controlling authorization and then it might give you nothing. As I face this problem on my last Project.
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Implement check for File Names with data into TRG table

hi,
I am trying to load the Multiple files names & Autonumber to oracle table T1 which is further loaded the auto-number with data to target table TRG. My problem is when the same name file comes again due to size then load it again. & also don't insert Target (TRG) table rows with same data while insert the only those records/rows which are not in Target Table(TRG) .. Is this standard approach. becoz in this way I thing loading Performance speed will b down??
Any other or best recommended approach???/
Thanks
Regards,
AMSIII
Edited by: AMSI on Dec 11, 2012 9:54 PM

Hey Jason,
Create a validation of type exists. in expression 1 put:
SELECT 1
FROM DUAL
WHERE UPPER(:P9_FILE) LIKE '%TEST.HTML';
{code}
change P9_FILE to your file browse item name and change '%TEST.HTML' to '%YOUR_FILE_NAME'
Hope this helps,
Tyson

Odd/Even pages with data from two tables

Hi Forum,
Can you please extend help/suggest with the following scenario:
I have two data tables and one table records needs to be printed on odd pages (Front page) and the other table records need to be printed on even pages (Back page). I need alternating front and back pages based on data records in the tables. Also second table will be having lesser records when compared with first table.
I'm able to get the alternating Odd/Even master pages. But the first table is being printed in both the odd/even pages first and then the second table is being printed in both the odd/even pages. How can I restrict the printing of the first table on odd page and second table on even page?
Thanks for your help/suggestions.
~Madan

You can play with pagination tab in your LCD tab, but I have never learnt enough to be able to use it effectively.
If I were in your shoes, I would alter the DDIC structures in the backend so you will only display it in the form, without any suicidal actions through the pagination, scripting or similar stuff.
How: If you need to alter pages, you can do that in your backend, right?
Like you can have a structure page with attributes:
- up/ front: data for the front page
- down/back: data for the back page
and you will alter the data in the table with this structure as a line in your ABAP program and will use to form to display the trnaformated data only.
Well... I don´t tell it is clear/right/ proper solution and cannot tell if there are any obstacles which will not let you use this scenario in your case, but you could consider this as an option...
Regards Otto

Drop Down list in table with data from database table

Hi,
I have created an interactive form in WD ABAP.
In Context tab I have created the nodes as follows:
ZSOHEADER node with cardinality 1..1
|-> MATERIAL node with cardinality 0..n. Under MATERIAL node there are 2 attrib. MAKTX and MATNR.
I am fetching data from MARA table into an internal table IT_MARA.
The node MATERIAL is bound to internal table IT_MARA.
I have created a table with property ' Body rows vary depending on data ' .
I have only one row in table. The first cell of the row is a drop down field.
I have bind the field to the node MATERIAL->DATA->MAKTX.
Now the issue is even though I have created only one row in my table, in preview it is creating as many rows in the table as the no.of records in the internal table.
I want only one row with the drop down list containing all values of the internal table.
Kindly suggest what to do.
Regards,
Vinod

Hi,
In the WebDynpro Context, in the main node create another node like A1 with cardinality 0..n and in this node create attributes TEXT and VALUE.
Now goto method and in that method using code wizard read the node A1.
And use the below code snippet sample in your program, i.e. code this under respective method of the webdynpro.
*Declare the TYPES
TYPES : BEGIN OF TY_TABLE,
TEXT TYPE SOMETYPE,
VALUE TYPE SOMETYPE,
END OF TY_UOM.
*Define Internal Table and work area.
DATA : IT_TABLE TYPE STANDARD TABLE OF TY_TABLE INITIAL SIZE 0,
WA_TABLE TYPE TY_TABLE.
SELECT TEXT VALUE FROM TABLENAME INTO TABLE IT_TABLE.
lr_node_info->bind_table( IT_TABLE ).
And in the Adobe Form Layout
Go to Menu of the Adobe LiveCycle Designer:
Tools>Options..>DataBinding
In that window you just check the Show Dynamic properties Check Box.
Now for the Drop Down go the binding tab in object palette and click on the list items and there specify the Internal Table and specify the text as the internal table text field and value as internal table value field.
OR
From the WebDynpro Native Library Palette use the Value Help Drop Down and in object pallette goto binding tab and provide the form interface binding. Before this in the WebDynpro goto Context and for the particular field under the properties provide the search help as dictionary search help and specify the name of the dictionary search help.
OR
We have another method of setting the Text and Value to the DDL directly in the WebDynpro by coding in the methods, I dont have much knowledge on this.
Regards
Pradeep Goli

Update column based on sum of data from another table

Hi We had two tables.
Table 1: matusetrans
ITEMNUM Location Quantity transdate
AM1324 AM1 2 12-4-12
AM1324 AM1 2 15-5-12
AM1324 AM1 3 10-6-12
AM1324 AM1 4 5-1-13
AM1324 AM1 2 13-3-13
AM1324 AM2 3 2-5-12
AM1324 AM2 2 12-7-12
AM1324 AM2 1 13-2-13
Table 2: Inventory
ITEMNUM STORELOC lastyear currentyear
AM1324 AM1 need sum(quantity) here need sum(quantity)
AM1324 AM2 need sum(quantity) here need sum(quantity)
We have to update the last year and current year columns with sum of quantities for each item from matusetrans table based on date at different location in Inventory table.
we had nearly 13,000 records(itemnum's with different location) in inventory table in DB we have to update entire records.
Any help...How to write an sql queries to update lastyear and currentyear columns with sum of quantities based on itemnum and location in Inventory table
Thanks
Edit/Delete Message

Try this
SQL> select * from matusetrans;
ITEMNU LOC   QUANTITY TRANSDATE
AM1324 AM1          2 12-APR-12
AM1324 AM1          2 15-MAY-12
AM1324 AM1          3 10-JUN-12
AM1324 AM1          4 05-JAN-13
AM1324 AM1          2 13-MAR-13
AM1324 AM2          3 02-MAY-12
AM1324 AM2          2 12-JUL-12
AM1324 AM2          1 13-FEB-13
8 rows selected.
SQL> select * from inventory;
ITEMNU STO   LASTYEAR CURRENTYEAR
AM1324 AM1          0           0
AM1324 AM2          0           0
SQL> merge into inventory i
2 using (
3            select itemnum
4                 , location
5                 , sum(decode(extract(year from transdate), extract(year from sysdate), quantity)) currentyear
6                 , sum(decode(extract(year from transdate), extract(year from add_months(sysdate, -12)), quantity)) lastyear
7              from matusetrans
8             group
9                by itemnum
10                 , location
11        ) t
12     on (
13           i.itemnum = t.itemnum and
14           i.storeloc = t.location
15        )
16 when matched then
17    update set i.lastyear = t.lastyear
18             , i.currentyear = t.currentyear
19 /
2 rows merged.
SQL> select * from inventory;
ITEMNU STO   LASTYEAR CURRENTYEAR
AM1324 AM1          7           6
AM1324 AM2          5           1
SQL>

How to export Tables along with Data and also Tables without data

Hi All,
I have a strange situation here. I have a 2 existing schema's under one database. Now the client wants to have 4 more schema's to incorporate the new branches of his company.
I want to know whether is it possible for me to run an expdp command by which i can have the data from the mentioned tables and only table structure of the remaining along with remaining database objects (procedure,functions,triggers,views,sequences etc).
Since there are some 32 Master tables, whose data i need to capture in db dump in order to run the batch under new schema and the remaining tables will be populated with data from the new branch employees hence the need is for table’s structure only.

Hi,
you should run two different import comand.
The first import with only metadata, just to recreate the structure.
With the second import you will import data only for the tables you need.
I think this is the simplier solution.
Acr

How to Create new database (copy all table with data excluding 2 table )with existing database.

Please follow the scenario:
using C#
1) current database file name is DB20122013.
when user click on new year button
2)Create backup copy of current database
3)New database should create with all table(excluding table "Dailytemp" and "DailyMain") with data and database name as DB20132014.
Musakkhir Sayyed.

Hi,
I hope, below stored procedure is useful for your scenario.
CREATE PROC Create_New_Database
( @DBNAME VARCHAR(550)
)AS
Test : Exec [Create_New_Database] @DBNAME='DB20122013'
BEGIN TRY
SET NOCOUNT ON
DECLARE @sql VARCHAR(MAX), @DBNAME_NEW VARCHAR(550),@num int
IF EXISTS(SELECT 1 FROM sys.databases WHERE name=@DBNAME) AND ISNUMERIC(RIGHT(@DBNAME,4))=1
BEGIN
SELECT @num= RIGHT(@DBNAME,4)
SELECT @DBNAME_NEW='DB'+CAST(@num AS VARCHAR(10))+''+CAST(@num+1 AS VARCHAR(10))
IF EXISTS(SELECT 1 FROM sys.databases WHERE name=@DBNAME_NEW)
BEGIN
SELECT @DBNAME_NEW+' database already exists'
END
ELSE
BEGIN
SET @sql='USE '+@DBNAME+' '+' backup database '+@DBNAME+' to disk = ''C:\'+@DBNAME+'.bak'' '
+' restore database '+@DBNAME_NEW+' from disk = ''C:\'+@DBNAME+'.bak'''
+' with move '''+@DBNAME+''' to ''C:\'+@DBNAME+'_data.mdf'' ,
move '''+@DBNAME+'_log'' to ''C:\'+@DBNAME+'_log.log'''
EXEC (@sql)
SET @sql=''
SET @sql=' USE '+@DBNAME_NEW+' IF EXISTS(SELECT 1 FROM SYS.TABLES WHERE NAME=''Dailytemp'')
BEGIN DROP TABLE Dailytemp END IF EXISTS(SELECT 1 FROM SYS.TABLES WHERE NAME=''DailyMain'')
BEGIN DROP TABLE DailyMain END '
EXEC (@sql)
END
END
ELSE
BEGIN
SELECT 'Database is now found or Database name does not mach the scenario'
END
SET NOCOUNT OFF
END TRY
BEGIN CATCH
DECLARE @ErrorMessage NVARCHAR(4000)
DECLARE @ErrorSeverity INT
DECLARE @ErrorState INT
SELECT @ErrorMessage = ERROR_MESSAGE(), @ErrorSeverity = ERROR_SEVERITY(),@ErrorState = ERROR_STATE()
RAISERROR (@ErrorMessage,@ErrorSeverity,@ErrorState )
END CATCH;
GO
Regards,
RAMBHARATH

To populate dynamically created int table with data from other table

Hi everybody,
I have already created an internal table dynamically, but now want to populate it with data from another IT depending on the plant name.
My dynamic int table contains fields with plant name like '8001' ,'8002' and so on.
no I want to read data from the other table and depending on bwkey which contains similar data like plant name , want to append to this new dynamic int table through read key statement.
I cannot reference the field name hard coded as it does not allow field symbol reference to be hard coded.
Pls help.

Hi,
Check the code below:
REPORT ztestdyn.
TYPE-POOLS : slis.
TABLES: yyle0003.
DATA:
g_exit    TYPE c,
g_save    VALUE 'A',               "For parameter I_SAVE
g_repid   LIKE sy-repid,           "For program name
g_variant TYPE disvariant.         "For parameter IS_VARIANT
*Tables
DATA: d_ref TYPE REF TO data,
        d_ref1 TYPE REF TO data,
        i_alv_cat1 TYPE TABLE OF lvc_s_fcat,
        ls_alv_cat1 LIKE LINE OF i_alv_cat1.
DATA: BEGIN OF total_tab OCCURS 0 ,
        tknum TYPE yyle0003-tknum,
        quantity TYPE p, "yyle0003-QUANTITY,
        END OF total_tab.
DATA: BEGIN OF g_scandata_tab OCCURS 0.
          INCLUDE STRUCTURE yyle0003.
DATA: END OF g_scandata_tab.
DATA: g_yyle0003_tab LIKE yyle0003 OCCURS 0 WITH HEADER LINE.
DATA: g_itab1 TYPE TABLE OF yyle0003.
DATA: wa_itab1 LIKE g_scandata_tab.
TYPES: BEGIN OF itab2,
         tknum TYPE yyle0003-tknum,
         vhilm TYPE yyle0003-vhilm,
         quantity TYPE p,
         END OF itab2.
DATA: g_itab3 TYPE TABLE OF itab2.
DATA: wa_itab3 TYPE itab2.
DATA: g_itab5 TYPE TABLE OF itab2.
DATA: wa_itab5 TYPE itab2.
DATA: g_itab4 TYPE TABLE OF itab2.
DATA: wa_itab4 TYPE itab2.
DATA: gv_wa TYPE REF TO data.
DATA : wa_tab TYPE itab2.
DATA: BEGIN OF itab6 OCCURS 0,
         vhilm TYPE yyle0003-vhilm,
         quantity TYPE p,
         END OF itab6.
******************Start of Internal Table Definition *******************
DATA:
        g_custom_container_0100 TYPE REF TO cl_gui_custom_container,
        g_alv_grid_0100    TYPE REF TO cl_gui_alv_grid,
        g_container_0100   TYPE scrfname VALUE 'LIST',
        g_mylayout         TYPE lvc_s_layo,
        ok_code            LIKE sy-ucomm.
FIELD-SYMBOLS :<f_fs> TYPE table,
                 <f_fs11> TYPE table,
                 <f_fs1> TYPE table,
                 <f_fs3> TYPE ANY,
                 <f_fs4> TYPE ANY,
                 <f_field> TYPE ANY,
                 <f_fs5> TYPE ANY.
FIELD-SYMBOLS: <fs_wa> TYPE ANY.
DATA: l_var TYPE i,
        l_i   TYPE i.
DATA: l_var1 TYPE char20,
        l_var2 TYPE char20.
DATA: l_TOTAL TYPE I,
      L_FILL TYPE i,
      L_TOT TYPE I.
DATA: l_int TYPE i,
       l_sum TYPE i.
FIELD-SYMBOLS: <f_fs2> TYPE itab2, "
                 <f_fs6> TYPE ANY,
                 <f_fs7> TYPE ANY.
DATA: l_var3 TYPE char15.
DATA: l_quant TYPE p.
FIELD-SYMBOLS: <f_fs8> LIKE itab6, "
                 <f_fs9> TYPE ANY,
                 <f_fs10> TYPE ANY.
FIELD-SYMBOLS : <f_fs12> TYPE ANY,
                  <f_fs13> TYPE ANY.
SORT g_scandata_tab BY tknum vhilm.
LOOP AT g_scandata_tab INTO wa_itab1.
    MOVE-CORRESPONDING wa_itab1 TO wa_itab3.
    APPEND wa_itab3 TO g_itab3.
ENDLOOP.
LOOP AT g_itab3 INTO wa_itab3.
    COLLECT wa_itab3 INTO g_itab4.
ENDLOOP.
LOOP AT g_itab4 INTO wa_itab4.
    MOVE-CORRESPONDING wa_itab4 TO wa_itab5.
    MOVE-CORRESPONDING wa_itab4 TO itab6.
    APPEND wa_itab5 TO g_itab5.
    COLLECT itab6.
ENDLOOP.
CLEAR wa_itab3.
SORT g_itab4 BY tknum vhilm.
DELETE ADJACENT DUPLICATES FROM g_itab4 COMPARING vhilm.
DESCRIBE TABLE g_itab4 LINES l_var.
l_i = '2'.
ls_alv_cat1-fieldname = 'TKNUM'.
ls_alv_cat1-col_pos = 1.
ls_alv_cat1-coltext ='ShipmentNo.'.
APPEND ls_alv_cat1 TO i_alv_cat1.
DATA: l_var4(10) TYPE c,
        l_var5(10) TYPE c,
        l_fieldname(20) TYPE c..
LOOP AT g_itab4 INTO wa_itab4.
    IF l_var >= 1.
      CONDENSE wa_itab4-vhilm NO-GAPS.
      ls_alv_cat1-fieldname = wa_itab4-vhilm. "l_fieldname.
      ls_alv_cat1-col_pos = l_i.
      ls_alv_cat1-coltext = wa_itab4-vhilm.
      ls_alv_cat1-do_sum ='X'.
      APPEND ls_alv_cat1 TO i_alv_cat1.
      CLEAR : ls_alv_cat1, l_fieldname.
      l_i = l_i + 1.
    ENDIF.
    AT LAST.
      ls_alv_cat1-fieldname = 'TOTAL'. "l_fieldname.
      ls_alv_cat1-col_pos = l_i.
      ls_alv_cat1-coltext = 'TOTAL'.
      ls_alv_cat1-do_sum ='X'.
      APPEND ls_alv_cat1 TO i_alv_cat1.
      CLEAR : ls_alv_cat1, l_fieldname.
    ENDAT.
    SORT i_alv_cat1 BY fieldname.
    DELETE ADJACENT DUPLICATES FROM i_alv_cat1.
ENDLOOP.
SORT i_alv_cat1 BY col_pos.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = i_alv_cat1
    IMPORTING
      ep_table = d_ref.
ASSIGN d_ref->* TO <f_fs>.
CREATE DATA gv_wa LIKE LINE OF <f_fs>.
ASSIGN gv_wa->* TO <fs_wa>.
DELETE ADJACENT DUPLICATES FROM <f_fs> COMPARING ALL FIELDS.
    LOOP AT itab6.
    CLEAR wa_itab5.
    wa_itab5-tknum = 'Total'.
    MOVE-CORRESPONDING itab6 TO wa_itab5.
    APPEND wa_itab5 TO g_itab5.
    CLEAR wa_itab5.
ENDLOOP.
     DESCRIBE TABLE g_itab5 LINES L_TOT.
       LOOP AT TOTAL_TAB.
      L_TOTAL = L_TOTAL + total_tab-quantity.
     ENDLOOP.
LOOP AT g_final ASSIGNING <f_fs2>.
    ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <f_fs2> TO <f_fs6>.
    ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <fs_wa> TO <f_fs7>.
    <f_fs7> = <f_fs6>.
    CONDENSE <f_fs2>-vhilm NO-GAPS.
    ASSIGN COMPONENT 'VHILM' OF STRUCTURE <f_fs2> TO <f_fs3>.
    ASSIGN COMPONENT 3 OF STRUCTURE <f_fs2> TO <f_fs4>.
    MOVE <f_fs3> TO l_var1.
    ASSIGN COMPONENT l_var1 OF STRUCTURE <fs_wa> TO <f_fs5>.
    <f_fs5> = <f_fs4>.
    CLEAR total_tab-quantity.
    READ TABLE total_tab WITH KEY tknum = <f_fs6>.
    IF sy-subrc = 0.
      ASSIGN total_tab-quantity TO <f_fs12>.
      ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <fs_wa> TO <f_fs13>.
      <f_fs13> = <f_fs12>.
    ENDIF.
    L_FILL = L_FILL + 1.
    IF L_FILL = L_TOT.
     ASSIGN L_TOTAL TO <f_fs12>.
      ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <fs_wa> TO <f_fs13>.
      <f_fs13> = <f_fs12>.
    ENDIF.
    AT END OF <f_fs2>-tknum.
      APPEND <fs_wa> TO <f_fs>.
      CLEAR <fs_wa>.
    ENDAT.
ENDLOOP.
CLEAR: <f_fs6>,
          <f_fs7>.
CLEAR <fs_wa>.
CALL SCREEN 0100.
*&      Module STATUS_0100 OUTPUT
      text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ZVKS'.
SET TITLEBAR 'ZVKS'.
CHECK sy-ucomm IS INITIAL.
SORT g_scandata_tab BY tknum vhilm.
CREATE OBJECT g_custom_container_0100
         EXPORTING container_name = g_container_0100
         EXCEPTIONS
           cntl_error = 1
           cntl_system_error = 2
           create_error = 3
           lifetime_error = 4
           lifetime_dynpro_dynpro_link = 5.
CREATE OBJECT g_alv_grid_0100
         EXPORTING i_parent = g_custom_container_0100.
g_mylayout-grid_title = 'Display Scanning data'.
CALL METHOD g_alv_grid_0100->set_table_for_first_display
    CHANGING
      it_outtab                     = <f_fs>
      it_fieldcatalog               = i_alv_cat1
                EXCEPTIONS
                  invalid_parameter_combination = 1
                  program_error                 = 2
                  too_many_lines                = 3
                  OTHERS                        = 4.
IF sy-subrc <> 0.
              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
Regards
Kannaiah

Data Grid - issues resizing width of columns and with data refresh and sort

SQLDeveloper 1215 on Windows XP professional
Database : various 9.2
In the table data tab there are a few minor issues our developers have highlighted.
1) There seems to be a minimum column width in the data display. This restricts flexibility in reviewing the data, esp. where the data length is less than the minimum column width.
2) If a column is resized or the column order is changed and a refresh or a new filter is applied then the columns are restored to their original position and size making it frustrating to run more than one query via the GUI.
3) There is no quick sort option by clicking on the column heading which would be useful.

I am still seeing this minimum column width in SQL Developer production (v1467) and I haven't seen any other posts relating to this. I have seen this all of the grids that I have looked at, including all of the grid based sub-tabs for the Object tabs (ie Columns, Data, Indexes, Constraints, etc) and the SQL Worksheet results tab.
It is very obvious with the Column Name and Data Type columns of the Table Columns tab - the Column Name column can be shrunk to truncate values but the Data Type column can only be shrunk to about the twice the width of the widest value.
Can anyone in development provide any comments about why we have this minimum width and how the minimum width is actually calculated?

Issue with Data binding in Table with Parameters

When we bind the table rows with parameter 'select', the data is not displayed in the table. Check the snippix file created for this issue: url: http://veui5infra.dhcp.wdf.sap.corp:8080/snippix/#70874
But the same parameter works with the odata service:
http://10.66.186.12:8000/OnlineShoppingAnalysis/Services/Analysis_Date_Range.xsodata/Sales_Periodwise?$select=Product_Name,Quantity
Credentials:
user: System
Password: Abcd1234

I'm not able to access your service,so I can't test it.
You could try to do a read operation on your model and add the result to a new JSON model which you can bind on to your table:
var sServiceUrl ="http://services.odata.org/Northwind/Northwind.svc";
var oModel = new sap.ui.model.odata.ODataModel(sServiceUrl);
var oModelJson = new sap.ui.model.json.JSONModel();
oModel.read("/Customers", null, {select: "Product_Name,Quantity"} , true, function(oData, oResponse){
        oModelJson.setData(oData.results);
sap.ui.getCore().setModel(oModelJson, "Model");
    },function(){
        alert("Read failed");});
OpenUI5 SDK - Demo Kit
Documentation/AdvancedTopics/DataBinding/ODataWrite – SAPUI5 Wiki (TIP CORE User Interface)
Kind regards,
Wouter

Problems with Date Type in Table View

Hello.
Following problem:
I have to make a Table View with some data. One Colum is Type of Date!
Now I used Table View Iterators to change the backgroundcolor of some cells.
Sample:
WHEN 4.
     DATA: col4_text TYPE REF TO CL_HTMLB_TEXTVIEW.
    CREATE OBJECT col4_text.
    col4_text->text = M_ROWREF->DATE1.
       If mod_vari = 1.
        p_style = 'cellDesign:POSITIVE'.
     ENDIF.
But now I have the problem that this columm´s date is not formated: 20050112 but I want it this way: 01.12.2005.
How can I handle this problem? newbie

This one throw me for a loop as well coming from a non SAP background but here's a nice little code sample that you will find to be quite useful all the world over
data: lt_date type string,
      lt_tmp type string,
      lt_sep type string.
lt_sep = '.'
* You already have your date but for the example not
* so this is why I use the lt_date
lt_date = '20050112'.
CONCATENATE
lt_date+4(2)
lt_date+6(2)
lt_date+0(4)
INTO lt_tmp SEPARATED BY lt_sep.
* Now you can give lt_tmp to your output of your cell
For the cell output you can double check the various weblogs on the subject "Iterator".
You can play around with the lines after CONCATENATE to put the date in the format you want.

How to update with data on two table

Hi,
I'm having below problem:
Table 1: T_UTR(bdate,rec,id,channel,invoice,prod,proc_date)
Table2: t_upd_utr(bdate,rec,id,channel,invoice,prod)
I want to update data in t_utr like below:
update t_utr set proc_date=sysdate,invoice=t_upd_utr.invoice
where
t_utr.bdate=t_upd_utr.bdate
And t_utr.rec=t_upd_utr.rec
And t_utr.id=t_upd_utr.id
And t_utr.channel=t_upd_utr.channel
And t_utr.invoice=t_upd_utr.invoice
And t_utr.prod=t_upd_utr.prod
I'm not able to do so with join as join is not possible in update statement.
Pls advice how can I achieve the above update with least complexity
Thanks
Deepak

update T_UTR
set proc_date=sysdate,
invoice=(select t_upd_utr.invoice where t_utr.bdate=t_upd_utr.bdate
And t_utr.rec=t_upd_utr.rec
And t_utr.id=t_upd_utr.id
And t_utr.channel=t_upd_utr.channel
And t_utr.invoice=t_upd_utr.invoice
And t_utr.prod=t_upd_utr.prod)
If you want filter then you can apply filter in where condition in Main update statement.

Creating a Query with Data from 4 Tables.

Hey guys. I'm having a small problem figuring out the best way for me to handle this query.
I'm trying to make a query which outputs the amount of appointments a GP has furfilled, and the total amount allowed.
I have 4 tables, for each I'm just gonna list the relevent columns:
Appointment: ID, Patient_ID.
Patient: ID, GP_ID.
GP: ID, Trust_ID.
Trust: ID, Quota.
Appointment table has 400 entries (2 per patient atm).
Patient table has 200 entries.
GP Table has 30 entries (GP's can be assigned to more than one person) .
Trust table has 6 entries.
What I need to do is, look at the appointment table and get the number of times each patient has an appointment.
Go through the patient table, and find out which GP the patient in the appointment belongs to.
Add each occurance to the correct GP.
Find out which Trust each GP belongs to, and add the total for each GP to the correct Trust.
Check the quota in the Trust table, to see if the total is more than the allowed.
I can't seem to think of an easy or simple way for me to do this. Can anyone help please? Many thanks.

Hi,
That sounds like a job for JOIN.
To check the quotas against the total, use the SUM function; either the aggregate SUM or the analytic SUM, depending on your requirements.
Sorry this answer is so vague, but that's the bes I can do with the information provided so far.
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved. In this case, between 2 and 10 rows of data per table should be enough to show what you need to do.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Always say which version of Oracle you're using.

HELP Filling a datagrid with data from various tables

MHI, this is simple.
I have 2 tables.
ORDERS and CLIENTS.
table ORDERS are columns: order_id, client_id, status
table CLIENTS are columns: client_id, client_name
my datagrid would have the columsn: order_id, client_name, status.
Thats all. I can't simply do it in Flex. HELP PLEASE.
These are my approaches:
1 - tried to create a new array collection with mixed data from these 2 tables to use as dataprovider in the datagrid.
even the ac is [Bindable], the datagrid won't update. Probably Im creating the ac in a wrong way.
2 - tried to use the ORDERS table call responder lastResult property (that works out to fill the data grid) and add a new colounm (client_name) within each item inside the ORDERS array collection.
I'm not able to ADD a property/field/column inside the ac. Of course, when I use .addItem, it will create a new "order" not a new "order.property"
if something like: ac.source[i].push({client_name:clientName}) worked...
My goals are simple. To fill the datagrid with those data.
Ah.. i almost forgot...
supose CLIENTS have 1000 registers.
I don't have to bring all those registers within flex to look for only one ID to retrieve a name to fill the orders datagrid, right?
THANKS A LOT
btp~

Ok, this is my first approach:
this function is an auto-generated event that happens when I drag a databank operator over a datagrid. Datagrid's dataprovider IS set to "orders":
(in my browser, the following messed lines only show decent while editting. Maybe copy it into a editor to better visualize: )
protected function getOrders_pagedResult_resultHandler(event:ResultEvent):void { orders = getOrders_pagedResult.lastResult //1 - this was previous declared as a Bindable Array Collection. var ta:Array = new Array; for (var t:String in event.result) { var tp:Array = new Array(); tp.push(getOrders_pagedResult.lastResult[t].order_id); //is it any difference to get data like in THIS LINE tp.push(event.result[t].status) //or THIS? var cn:String = getClientsByID(event.result[t].client_id); //this won't work in time. The getClientsByID delays to get data. var obj:Object = {client_name:cn}; //so cn, in this line, will be "null". How can I handle this? tp.push(obj); ta.push(tp) } orders.source.push(ta) //this is what I wanted datagrid to show, but it doesn't. //if I leave the first statement, everything above is ignored //if I comment the first line, datagrid shows nothing. }
I realize that the code above won't work because the properties inside each item won't have a "label" to datagrid to call in dataField property...I don't know how to do that. I thought by creating an object (like the obj above) it would work... it wont.
My getClientsByID is a modificated auto-generated function which doesn't work properly:
(in my browser, the following messed lines only show decent while editting. Maybe copy it into a editor to better visualize: )
protected function getClientsByID(itemID:int):String { getClientsByIDResult.token = clientsService.getClientsByID(itemID); return(getClientsByIDResult.lastResult.name); }
It seems it doesn't work (returns null) because the function runs faster than the call responder result.
Creating a listener for everything seems to be not the best practice, but a band-aid...
Again.
I should create a class in php to return the "ready-to-use" data. Ok?
Thanks a lot for your comments. Do I miss any important part of the code?
Btp~

Issue in WS based on FM with data declared as TABLES

Similar Messages

Maybe you are looking for