Issue on the Data Form - Implied Sharing

Hello,
We have a data form on which the user can drill down till Level 0 Customer in rows to input data. The issue is for some customers when the user is trying to input the data at Level 0 Customer it is not saving the input number but was getting overridden with the parent value automatically. If the user was inputting at parent customer it was filling the same value to the level 0 customer too.
When I checked in the outline...I noticed that these were the Customers that had only a single child and I am guessing that this is happening because of the implied share property. I am not sure if there could be any other reason for this to happen. If I am wrong please do correct me.
Now I know if you change the property of the parent customer to Never Share it might resolve the issue.But the problem here is - there are a lot of such customers. And every month we do get new customers that could belong to the same case. It would be tough to manually go and change the property to Never Share for all those Customers and keep a track of it. It might be a maintenance issue.
So are there any other solutions? Can we somehow resolve it? Please let me know your suggestions or ideas on what you think would be the best way to get this fixed.
Any ideas are appreciated.
Thank you !
~ Adella

Thanks a lot Robb for your suggestions.
Yes you are right since both the parent and the children are set to store in our outline more blocks are being created.
Taking the parent off the data form might not be the best solution as there are many such customers and in that case they might have to keep a track to not include such parents on the dataform specially while designing it..and also then its like some of the customers will show parent and children both and some only children in rows. I think they wouldnt like it and it might hurt consistency. But yes I will surely check on the option of turning on the Implied Sharing in the Essbase.cfg
Thanks once again !
~ Adella

Similar Messages

5200: Error executing query: The data form grid is invalid.

Hi,
I am getting this error " 5200: Error executing query: The data form grid is invalid. Verify that all members selected are in Essbase. Check log for details.
com.hyperion.planning.HspException;hasPovDims=1;povXML=<?xml version="1.0"?><datasources><datasource name="Profit " dsid="228af2c3_129ca3dd85c_-77b1" allowEdit="1"><dim name="Period" dimIndex="1" dsName="Profit " keyDimName="Period" memberName="Apr" displayName="Period: Apr"/><dim name="Year" dimIndex="2" dsName="Profit " keyDimName="Year" memberName="FY10" displayName="Year: FY10"/><dim name="Entity" dimIndex="5" dsName="Profit " keyDimName="Entity" memberName="9999" displayName="Entity: 9999"/></datasource></datasources>"
I have checked that both the systems essbase and planning are same. nothing's different. still i cannot find the exact reason why the report is not working.
can any please help me.
btw, i am using Hyperion Planning 9.3.1
Thanks,
BIMS

Hi
You probably deleted some members from outline that are used by report
I would recommend you to open you report/grid via rep.client and try to find which elements are abcent
Regards
Alexander
Edited by: Softperson on 19/8/2010 17:38

The data form form name is invalid. Check log for details

Hi all,
i have just built a planning application from scratch and created my first form.
i have encountered the error "The data form <form name> is invalid. Check log for details "
and i have checked the log file.
It reads as follows
Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled.
An error [1012703] occurred in Spreadsheet Extractor.
Spreadsheet Extractor Elapsed Time : [0] seconds
Spreadsheet Extractor Big Block Allocs -- Dyn.Calc.Cache : [0] non-Dyn.Calc.Cache : [0]
Transaction [ 0x60001( 0x4d8030e5.0xa0280 ) ] aborted due to status [1012703].
User [admin] set active on database [Plan1]
Can any one suggest me how to handle this.
Thanks in advance

user9192499 wrote:
Hi all,
i have just built a planning application from scratch and created my first form.
i have encountered the error "The data form <form name> is invalid. Check log for details "
and i have checked the log file.
It reads as follows
Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled.
An error [1012703] occurred in Spreadsheet Extractor.
Spreadsheet Extractor Elapsed Time : [0] seconds
Spreadsheet Extractor Big Block Allocs -- Dyn.Calc.Cache : [0] non-Dyn.Calc.Cache : [0]
Transaction [ 0x60001( 0x4d8030e5.0xa0280 ) ] aborted due to status [1012703].
User [admin] set active on database [Plan1]
Can any one suggest me how to handle this.
Thanks in advance
ERROR 1012703
*"Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled."*
There is an error in a formula(s), therefore, no calculations will work. The problem is that when you have the outline open in Edit mode and you try to 'Validate', it does not identify any of these errors, nor does it write it to a log. However, you can go one by one and validate each formula. So any time you delete a member or modify a member name, be sure that this member is not included in any formula.
Regards,
Prabhas

The data form is invalid. Please Check log for details.

Hi.
Recently i have migrated an application from scratch onto same datasource where application earlier was hosting on. i have deleted the application and making use of same datasource i have created the application again and migrated the artefacts and imported,refreshed and loaded the data into essbase db, once after the migration am not able to open some data forms and after the essbase restart i am able to some and others are still giving the same error message as earlier "The data form is invalid Please check log for details.".
Could anyone help on this. have gone through different otn answers but unable to reach at point.
Thanks
Amith

Try Oracle Support:
Error "1012703 Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled" During Calculation (Doc ID 744529.1)
or
Error: "Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled." (Doc ID 593227.1)
Cheers
John
http://john-goodwin.blogspot.com/

The data Form is invalid. Check log for details.

Hi All,
I am getting the following error, when I try to open a form.
The data form 1. Current Year Forecast Input Form is invalid. Check log for details.
Could you please let us know the path of the log file.
Thanks & Regards,
Sravan Kumar.

Hi,
If you want to know what patch release you are you, then log into planning directly and click help > about
The latest patch is :- 7229787 — You cannot open a Planning data form in Smart View, if in Planning preferences, the property for Indentation of Members on Page Display is set to Indent based on hierarchy.
I believe John was referring to this bug which was resolved in patch 9.3.1.1.6 :-
7229787 — You cannot open a Planning data form in Smart View, if in Planning preferences, the property for Indentation of Members on Page Display is set to Indent based on hierarchy.
Cheers
John
http://john-goodwin.blogspot.com/

Can SPM 2.1 or 3.0 BI standard data model read the data form existing BI P

Hi,
I am curious to find out, can SPM 2.1 or 3.0 BI standard data model read the data form existing BI Procurement (Cubes and DSO's) with no customization mapping?
i know SPM 2.0 do not have that flexibility (Standard data model can read from BI), we would have to map transformation.
I would appreciate your response..
Rgds,
Mahesh

Hi Mahesh,
What you can do in SPM30 is create an export datasource for existing BI objects and use them as direct datasource in SPM using template mapping.
Direct transformations from BI object to SPM objects is not provided.
Regards,
Divyesh

The data form formname is currently in use and is locked by user username

We run planning 931 on weblogic 91 and sometimes our administrators find our forms locked. So the are not able to edit them.
The following message appears +“the data form <formname> is currently in use and is locked by user <username>”.+
Off course it always happens with users who are not available themselves to unlock the form for others. ;-)
Only a planning windows service restart unlockes this. In our case the form is not unlocked after 2 hours.
I found this phrase via google. It suggests that there is a certain (time) propertie which unlockes the form after a given period.
Does anyone know where to set this property? Or to solve this otherwise.
Only one person at a time can use the Add a Row function on a particular form. When you have the form open, everyone else is locked out. If you close the form (using the X) instead of cancelling it, it will remain locked by you for the next two hours, even though it's not on your screen anymore. If this happens, you will be the only one who can reopen the form. You can unlock the form by reopening it and then clicking the Cancel button to exit properly.

no solution found. A restart of the services did the job. Hopefully this is not necessary again.

I want to store the data form the PWM and the value of the changing duty cycle into a file simultaneously and continually

i want to store the data form the PWM and the value of the changing duty cycle into a file simultaneously and continually but having problem.Please can anyone help out.
Attachments:
data.vi ‏60 KB

Hello,
Have you looked at the "Write Binary File.vi" and "Read Binary File.vi" examples?
They give you a good clue as how to write and read arrays to and from binary files.
For your data it means that you could put the two data items to write in an array and write the array to file, for the read its important to in what sequence the number were written to file.
Kind regards,
André
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

Having trouble assigning the Data Type to Shared Variables

I have some type definitions that I need to use as shared variables. When making the shared variable, I create it and then name it. I then select "From Custom Control..." in the Data Type field and select the applicable type definition. The problem is that it displays some other type definition. Am I doing something wrong? I am using LV v.8.6. I don't recall having this problem with v.8.5.1.

Hi Hunter,
All the custom controls are set to Type Def. Since sending my question, I noticed that the system uses the first similarly used custom control and it's name. For example, I have several clusters that each have four numeric controls in them. When creating a shared variable for each of the various clusters, it uses the first custom control that was set up as a shared variable. I hope this makes sense to you. I have not had a chance to see if the shared variables are working because I have other issues to deal with first.
What troubles me is that I don't recall seeing this with v.8.5.1.
I suppose I could and perhaps should use a common type def for all similarly used shared variables.
Dave

Data Extraction issue from the data source 2LIS_08TRTLP

Hi All,
We are facing one issue in time of extraction from data source 2LIS_08TRTLP(Shipment Delivery Item Data per Stage) in BW. For some out bound delivery no. Gross weight(BRGEW) is coming zero though there is value showing in the source system(ECC) in VL03 and in LIPS table. BRGEW (Gross weight) which is directly mapped in BW infosource. There is no restriction in the extraction and 0 is coming for this field in the first layer extraction.Even in the PSA all values are zero.
We have checked those delivery , delivery is being split into batch . But not the all split delivery is
giving this problem.
With Thanks
Shatadru

Yes I have done the same means I have filled setup table for those shipment no related to that delivery no and checked in the RSA 3 and required value is coming in RSA3 a. That means there is no problem in the Extractor .But I can not pull the data now in BW as it is in Production and every day delta comes .But the in the first layer ODS there is no value for that entry which was previously loaded(Though there is no routine and any restriction).
But I have one observation in the data source that particular field is in INVERSION marked in the Source. But that particular delivery for which it is giving is not canceled or returned or rejected. PGI created for that delivery and delivery status is completed for that.

Issue with the data of attachment of the mail with FM 'SO_NEW_DOCUMENT_ATT'

Hi Gurus,
I am developing my program in SAP R/3 4.7 system.
I have a requirement to attach a txt file to the email. I am able to attach the file and fill the contents of the file.
But the issue is with the data in the file. There are no line breaks in the data of file and all the words are saperated by space.
For EG: If I have filled 2 records(line1,line2) in the internal table provided to content_bin field, the data in the attachment looks like this.
l i n e 1 l i n e 2
but I want the data to be like below:
line1
line2
Below is my code:
Fill the document data and get size of attachment
     DATA:w_cnt TYPE i.
    DATA: WA_ATTACH LIKE LINE OF P_ATTACHMENT.
DESCRIBE TABLE p_attachment LINES w_cnt.
READ TABLE p_attachment INTO WA_ATTACH INDEX w_cnt.
Fill the document data and get size of attachment
gd_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( WA_ATTACH ).
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'EMAIL'.
gd_doc_data-obj_descr = sub.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Create attachment notification
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num   = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type   = 'RAW'.
it_packing_list-obj_descr = 'Job Log'.
it_packing_list-obj_name   = 'Job log'.
it_packing_list-doc_size   = it_packing_list-body_num * 255.
APPEND it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
loop at i_t_list_of_emailids INTO i_t_list_of_emailids_wa.
it_receivers-receiver = i_t_list_of_emailids_wa-emailid.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
it_receivers-express    = 'X'.
append it_receivers.
ENDLOOP.
data:   new_object_id like sofolenti1-object_id.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
            COMMIT_WORK                = 'X'
       importing
            sent_to_all                = gd_sent_all
            new_object_id              = new_object_id
       tables
            packing_list               = it_packing_list
            contents_bin               = p_attachment
            contents_txt               = it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
Kindly let me know to procedure to solve the iisue
Thanks in advance,
Kiran Kumar K

Hi Kira,
you can try to use a CR_LF to separate the records.
constants: con_cret type c value cl_abap_char_utilities=>CR_LF.
And when you append your record to the internal table add to the end the con_cret.
LOOP AT t_build into wa_charekpo.
    CONCATENATE wa_charekpo-order wa_charekpo-kunnr
                wa_charekpo-sel
           INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.

Hi my mum has recently gotten a white iphone4 and i have a black iphone4 we both would really want to switch over our phones with each other i was just wondering if there would be any issues would the data contract be switched over???

please can someone help me i have got a black iphone 4 and my mum has got a white iphone 4 we would like to switch both of our phones with each other we are just worried if the data services and our contracts will be switched over we dont care about our phone music and contacts ok thankyou

Most carrers won't care if you change phones as long as you are payng for al the services they require. Since you both have iPhones, it probably won't be an issue, but since we don't know who your carrier is we can't say it they will have a problem with you making that change or not. The only way to make certain it won't be a problem is to contact your carrier...

Issue with the date format

Hi,
I have a query which uses other schema data using dblinks. I am facing performance issues with the query. I have the following condition in where clause
c.src_data_dt BETWEEN TO_DATE('01-MAR-2009 00:00:00','dd-mon-yyyy hh24:mi:ss')
AND TO_DATE('31-JUL-2009 23:59:59','dd-mon-yyyy hh24:mi:ss')
TO avoid this performance issue, I have been asked to replace that with the following..
c.src_data_dt BETWEEN '01-MAR-2009 00:00:00' AND '31-JUL-2009 23:59:59'
But if I used like this, I Am getting the following error.
ORA-01830: date format picture ends before converting entire input string.
How can I resolve this error?
Thanks
Kaliappan

kaliappan wrote:
DATEThen your original approach is the correct one.
You should ask the individual who told you to modify it for performance reasons 'why', as there will be no performance benefit from converting the DATE column into a string (which is what would have to happen if you queried the way you were told).

Write Access to the data form

Hi ,
I have created a dataform and would like to enter the data in the form .
I have created few users but these users do not appear when i select a data form and click assign access.
Please let me know what needs to be done.
Thanks & Regards,
vijaya

Hi ,
Following error in coming when i type esscmd in the command prompt .
Essbase Command Mode Interface - Release 9.3.1 (ESB9.3.1.0.0B181)
Copyright (c) 1991, 2007, Oracle and/or its affiliates. All rights reserved.
U.S. Patent Number 5,359,724
U.S. Patent Number 6,317,750
Failed in GCInit(). Return code [10]
Using ARBORPATH [C:\Hyperion\AnalyticServices;C:\Hyperion/common/EssbaseRTC/9
1]
ARBORPATH dump: C(43) :(3a) \(5c) H(48) y(79) p(70) e(65) r(72) i(69) o(6f) n
) \(5c) A(41) n(6e) a(61) l(6c) y(79) t(74) i(69) c(63) S(53) e(65) r(72) v(7
i(69) c(63) e(65) s(73) ;(3b) C(43) :(3a) \(5c) H(48) y(79) p(70) e(65) r(72)
69) o(6f) n(6e) /(2f) c(63) o(6f) m(6d) m(6d) o(6f) n(6e) /(2f) E(45) s(73) s
) b(62) a(61) s(73) e(65) R(52) T(54) C(43) /(2f) 9(39) .(2e) 3(33) .(2e) 1(3
Path to locale files passed to GCInit() was [C:\Hyperion\AnalyticServices;C:\
erion/common/EssbaseRTC/9.3.1\locale]
ESSLANG variable set to [English_UnitedStates.Latin1@Binary]
Could not find the locale files at specified location
Thanks & Regards,
Vijaya

Issue with the Data Type 'Number' in Business Objects

Hi,
I have an Object in the Universe where the Data Type of the Object is a number. This Column pertaining to this Object has certain values in the database out of which there is a 17 Digit Value which is 00000000031101165.
Now, when trying to retreive the same value through Business Objects it is getting rounded off to 00000000031101200 automatically when trying to view in Webi and when trying to retreive the same in Designer/Deski, it displays as 0.000000003110116E+16.
So, I would like to know if there is any other alternative in trying to retreive the Original Value that would not round off. Also, do we have any Limitation for the Data Type Number in Business Objects? The Version we are on is XI3.1.
Note: There are no functions that are used on this Object at the Universe Level and would not like to use any functions here.

What is the underlying database?
It looks like the data is considered to have two decimals, but is rounded to zero decimals.
Only you don't see the number formatting.
Is this a BW query?
Is this a calculated keyfigure?
In the query you can specify the rounding you want and it is also possible to specify it on an infoobject level.
Check those settings...
Hope this helps,
Marianne
PS. Oh, and about the formatting, you can specify a default object format in the universe and override it on the final client (WebI, Crystal)

Issue on the Data Form - Implied Sharing

Similar Messages

Maybe you are looking for