SQL 2000 AND SQL 2005 ON THE SAME SERVER

Hi all ,
I have an installation of SAP4.7SR1 /MSSQL2000 on a windows 2003 server.
I want to install SAP SOLUTION MANAGER 4.0 /MSSQL2005 on the same server ... it is possible that two version of SQL ( 2000 and 2005 ) coexists on the same server ? It's sufficent to install SQL into two different directory ?
Thank's a lot.
Antonio Voce.

Hi,
yes it is possible to install SQL2000 and SQL2005 on same server but there are certain special considerations that you should be aware of
look at following blog
http://blogs.msdn.com/sqlblog/archive/2006/09/27/co-existence-of-sql-2005-with-sql-2000.aspx
also look http://msdn2.microsoft.com/en-us/library/ms143694.aspx
but in case of SAP Installation i prefered that to upgarde SQL2000 to SQL2005 then install solman 4.0
regards,
kaushal

Similar Messages

Can SQL 2000 and SQL 2005 drivers co-exist in PI?

Hi,
Currently in our PI environment, we have JDBC Adapter connections to SQL 2000 database servers for which the Driver has already been installed.
For connecting to new SQL 2005 database servers, I understand that we have to install the SQL 2005 drivers. I also came to know that SQL 2005 Driver is backward compatible and supports JDBC connection to SQL 2000 server.
But the question I have is whether both the SQL 2000 and SQL 2005 drivers can be installed together in a way that connection to SQL 2000 use the 2000 driver and the connection to 2005 uses 2005 Driver.
(They have different connection strings)
Many thanks in advance,
Regards,
Rosie Sasidharan

The SQL Server 2005 JDBC driver is far better than the SQL Server 2000 JDBC driver. The 2005 JDBC driver primarily consists for one file, sqljdbc.jar. ( if you want to use windows authentication there is another file you would need based on your platform x64 vs x86 called sqljdbc_auth.dll. If in the connect string you list ;integratedSecurity=true which means integrated security would be used and this second file would be required. The 2000 driver did not support integrated security.
The SQL 2000 JDBC driver was made up of the 3 jar files:
msbase.jar,mssqlserver.jar and msutil.jar.
If you want to use a Microsoft JDBC driver to connect to SQL Server 2005, than you should use the 2005 driver, sqljdbc.jar.
Follow the instructions in point 1 of the note #831162 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 JDBC Adapter questions 1 and 13.
Since the jar are different I assume you can use the both drivers, but it doesnt make sense.

Can we run 11g RAC and 12c RAC in the same server?

There is a requirement to run 11g RAC and 12C RAC in the same server for a year or so and then remove 11g RAC?
Current setup:
HP-unix 3 node RAC on 11g R2
4CPU
64 GB RAM
3 TB SAN storage
no ASM
Upgrade setup:
HP-unix 3 node RAC on 12C RAC
8CPU
128 GB RAM
6+ TB SAN storage
ASM
We are asked to use the same server and upgrade Hardware to install and run 12C RAC. What are the implications of running RAC in the same server/nodes?
Thank you for your time!

Hi,
The following table shows you the compatibility between various versions:
Clusterware
ASM
DB
Certified
12.1
12.1
12.1
Y
12.1
12.1
11.2(a)
Y
12.1
12.1
11.1(a)
Y
12.1
12.1
10.2(a)
Y
11.2
11.2(b)
11.2
Y
11.2
11.2(b)
11.1
Y
11.2
11.2(b)
10.2
Y
11.1
11.1
11.1(c)
Y
11.1
11.1
10.2
Y
11.1
11.1
10.1
Y
11.1
10.2
11.1
Y
11.1
10.2
10.2
Y
11.1
10.2
10.1
Y
11.1
10.1(d)
11.1
Y
11.1
10.1(d)
10.2
Y
11.1
10.1
10.1
Y
10.2
10.2
10.2
Y
10.2
10.2
10.1
Y
10.2
10.1(d)
10.2
Y
10.2
10.1
10.1
Y
10.1
10.1
10.1
Y
(a) Pre-12.1 database instances require an ASM instance resident on the same node as the database instance. Pre-12.1 database instances cannot leverage the implicit HA of Flex ASM.
Oracle Clusterware (CRS/GI) - ASM - Database Version Compatibility (Doc ID 337737.1)

Problems with Sent mail and multiple accounts on the same server

I have 2 different email accounts that are on the same server. Regardless of the account from which I send the email, all of the sent messages end up in the same sent folder. Is there a way to force the sent messages to go into their correct Sent folder?

In the Finder, go to ~/Library/Mail/. With that folder open, do Edit > Select All (⌘A), then Edit > Copy (⌘C), and paste it in your reply to this post, to let me see the names of the files and folders present at the root level of the Mail folder.
Before actually posting that information, you may edit it so that the file/folder names do not reveal any details you wish to keep private, e.g. you may replace any real username with "username" to hide your real email address if you wish; similarly, you may disguise any domain names you don't want to be revealed. Try to be consistent in how you disguise those details, though, as we may need to refer to them in subsequent posts.
Now, go to ~/Library/Mail/Mailboxes/. With that folder open, repeat the process to let me see the names of the files and folders it contains. Again, you may disguise any mailbox names you wish to keep private. Be careful to not alter any suffixes, though.
Finally, for the two accounts involved in the problem, locate the account folders within ~/Library/Mail/ -- their name begins with the account type (POP, IMAP, Mac), followed by the account username and the incoming mail server. For each account folder, repeat the process to let me see the names of the files and folders it contains.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder. You can easily locate any of the folders referred to in this post by copying the file path here, doing Go > Go to Folder in the Finder, and pasting the file path there.

Can I install 9i database and 9i AS on the same server ?

Dear Forum,
We need to install Oracle 9i database(9.2.0.1.0) 64-bits
and Oracle 9i Application Server (9.0.2.0.1) on the same Server machine with the following features:
Machine: SunFire 6800, 4 CPU, 8 GB RAM
OS: Solaris 9 8/03
Is it possible?
Will we have problems or conflicts with the ports numbers?
Please, any aditional comments or recommendations will be welcome!!!!
Best regards,
Alfredo

Hi Alfredo,
If you are planning to install an infrastructure as part of your application server, you might run into a port conflict for the TNS listener. The easiest way of solving this is to move the non-infrastructure database listener to another port.
A number of things like these are handled automatically in later releases. You do know that 9.0.2 is old and desupported, right?
Regards,
Mathias

FMS 3.5 on Server 2012 R2 and with Wowza on the same server

Hi there,
Is it possible to have my old FMS 3.5 on the same server as I have Wowza 3.6 installed?
The server is windows Server 2012 R2.
I have installed the FMS, but it does not start up after installation, and the bat-files cannot start/stop the service either. It doesn't make a difference if I go to Services to start them up manually, the sample files still doesn't work.
Any suggestions?
Thanks in advance
HC

Hi Hans Christian RVN,
FMS 3.5 is not supported on Win 2012 R2. You may want to give it a spin on the supported platforms listed at https://www.adobe.com/support/documentation/en/flashmediaserver/357/FMS_357_Release_Notes. pdf.
~Ashish

SCCM - Branch Distribution point and Management point on the same server

Hi All,
Would like to know if any other SCCM roles like management point , distribution can be installed on the same server on which a branch distribution point is installed?
Rgs,

Hi,
Branch Distribution Points no longer exist in Configuration Manager 2012 and above.
I'm assuming you want to install additional roles on an existing server that is currently only acting as a Distribution Point and the answer is yes, this is possible, but it depends on which other roles you want to install and there will probably be some
prerequisites needed.
Can you elaborate on which roles you are considering installing?
Steven Hodson | http://www.stevenhodson.com | @_hodders

Internet Sales ISA (R/3 Edition) and SAP EP on the same server ?

We already have an SAP Portal (SAP EP) in place and we are planning to do a pilot deployment of the E-Selling R/3 Edition: is it technicaly possible to deploy then on the same SAP WAS server / cluster ?
If yes, what would be the limitation or reason motivating not to do it.
Thank you

Thank you for your answer!
How did you solve the SSO more specifically? You created an URL iView from scratch and assigned it to a specific system? Did you also to maintain any parameters or how did you get pass the login screen? Does that work automatically?
Furthermore, did you use the link ".../b2b/b2b/init.do" as URL or some other? Because I once saw one ending differently...
Kind regards,
Christine

IBCM internet and intranet management on the same server

Could anyone help me see what I am missing? We are trying to test setting up IBCM using the same management point as the intranet clients. We have already successfully implemented PKI for intranet clients because we were bringing in a MacBook Air. We have
an external URL coming through reverse proxy and forwarded to our internal server. I can navigate to
https://sccmext.domain.com/sms_mp/.sms_aut?MPlist and get 403 access denied I also get that when I am on prem and navigate to the local server
The CcmMessging.log has errors regarding post to
https://sccmext.domain.com/ccm_system/request failed with 0x87d00231
I think this has something to do with certificates... I have a SCCM Web certificate for the internal server hostname and another certificate for the external name coming through the reverse proxy.
I have the internet FQDN on the site system properties, MP and DP are set to allow internet and intranet based clients...

Here are some entries before and after that entry above:
10.7.29.195 GET / - 443 - 10.7.29.81 - 200 0 0 778 0
10.7.29.195 GET / - 443 - 10.7.29.82 - 200 0 0 778 0
10.7.29.195 GET / - 80 - 10.7.29.82 - 200 0 0 701 0
10.7.29.195 GET / - 80 - 10.7.29.81 - 200 0 0 701 0
10.7.29.195 GET / - 443 - 10.7.29.81 - 200 0 0 778 0
10.7.29.195 GET / - 443 - 10.7.29.82 - 200 0 0 778 0
10.7.29.195 CCM_POST /ccm_system/request - 443 - 10.7.29.9 ccmhttp 403 7 5 1466 15
10.7.29.195 GET / - 80 - 10.7.29.82 - 200 0 0 701 0
10.7.29.195 GET / - 80 - 10.7.29.81 - 200 0 0 701 0
10.7.29.195 GET / - 443 - 10.7.29.81 - 200 0 0 778 0
10.7.29.195 GET / - 443 - 10.7.29.82 - 200 0 0 778 0
These are from the IIS log file .195 is the SCCM site server, 81 and 82 are the reverse proxy servers. Sorry if I am not answering questions accurately, this is getting into parts of SCCM I am not familiar with at all.

Need urgent on installation of Spatial and R12 data in the same server

Hi
This is Hanumantha. I am getting problem with Geo Spatial data type objects manuplating from Apps.
Geo spatial data is installed in Navteq database in one server. R12 application is installed in another server. Through data base link in APPS, I am able to access Navteq tables data, procedures etc. But I can't manuplate the objects data like Varrays and object types from apps throgh db link from navteq.
Instead created the procedure which will decompose the object type to "primitive types" (number, date, varchar2,.) which is accessing from apps. But hz_locations , Geometry column will have data type SDO_GEOMETRY and I cant update with primitive data type (number, date, varchar2..).
Kindly please help us reconstucting to the SDO_GEOMETRY object using primitive data types.
OR
Is there any possiblity of installing Navteq database(GeoSpatial data) and R12 applications data together in the one server.
Could please any help on the above as soon as possible?
Thanks in Advance.
Thanks,
Hanumantha

Could you give me an example of this update rutine?

Crystal Report 8.5 and 9 installed on the same box

Is it possible to have Crystal Report 8 and 9 installed on the same server?

Hi Michael,
You can install Crystal Report 8.5 and 9 on same box.
However, there are chances that dll may conflict and few issues may occur.
Try to install on different harddrives.
Regards,
Shweta

Upgrade windows 2000 t o windows 2005 and sql 2000 to sql 2005

Dear People,
i have not actually done any upgradestill now, i have task where i need to upgrade existing sap system.The sap has already been upgraded, now my task is to upgrade operating system and database
requirement:
windows 2000 to windows 2003
sql 2000 to sql 2005
the above should be done by the procedure recommended by sap only, so im wondering where i can find the information and tools for uprading both O/S and DB.
Help
Raj

I personally would not do a Windows upgrade, Windows can be very picky when it comes to 3rd party SCSI/FC drives you may experience bluescreens during the update after the second boot etc.
I would backup the system and install the operating system from scratch and do a system copy instead.
For your database upgrade, there's a guide at
http://service.sap.com/instguides
--> Other documentation
--> Database upgrades
Markus

Lync 2013 and SQL 2012 on the same server

Hi,
I'm in the process of migrating Lync 2010 to Lync 2013. I have a clean install of Windows Server 2012 R2. Is it possible to install Lync 2013 and SQL 2012 on the same server or does it have to be on separate servers.
Thanks
P

Configure Separated SQL Server to use in an Enterprise deployment of Lync Server. Standard Edition servers use a collocated SQL Server Express version of SQL Server that is right sized for the workloads of a Standard Edition server.
Also you can refer below link
http://technet.microsoft.com/en-us/library/gg425848.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

SCCM central site and primary site use the same SQL SERVER with two Instance.

Hi Guys,
I want deploy SCCM 2012 central site and primary site in my domain. But Only one Sql server for me. Any one can tell me how to install the central site server and primary site server with the same SQL SERVER with two instance.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sean Xiao
TechNet Community Support

Although you can install like the configuration you said above, we do not recommend you do it this way. If your SQL box has problems, all the data will go away and you will not have data redundancy.
You need to configure the different SQL Port and SQL Broke service port e.g.
SQL port 4023 SQL Broke Service port 4022 for CAS instance
SQL port 4024 SQL Broke Service port 4021 for PRI instance
Juke Chou
TechNet Community Support
I agree with Johan and this configuration should not be used. But I want to clarify that the default ports for "SQL port" (actually, SQL over TCP) is 1433 and the SQL Broker Service uses 4022. The configuration above should work but the "correct" would be
to use 1433 and 4022 for the CAS and 10434 and 4023 for the Primary :)
You can read more about Network Ports used by Configuration Manager here
http://technet.microsoft.com/en-us/library/hh427328.aspx#BKMK_CommunicationPorts
/Tim
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

Database restore from SQL 2000 to SQL 2005 for SBO 2005B

Hi Everyone,
I am facing some problems in regards to the restore of SBO Database from SQL 2000 to SQL 2005.
Let me explain you the problem.
See I am using SAP B1 2005B with patch level 38 in my laptop with SQL 2000. I have made an company in this and done work in it as a production company and now I want to restore this company in the server which has SQL 2005. How to do it.
I have taken a backup in my laptop from SAP B1 Server Suite Manager which has SQL 2000 and sucessfully backed up but when I am trying to restore in the server which has SQL 2005 I am getting the following error in SQL 2005 in server :-
Restore failed for Server 'DXBAP001'. (Microsoft.SqlServer.Smo)
System.Data.SqlClient.SqlError: Directory lookup for the file "C:\Program Files\Microsoft SQL Server\MSSQL\data\SBO_DCHAR.mdf" failed with the operating system error 3(The system cannot find the path specified.). (Microsoft.SqlServer.Smo)
Please let me know the solution for it.
Thanks in Advance.
Regards,
Kawish Junaid Mazhari

Hi,
In SQL 2005 create a database and name as the 200 one was (though any name would do). when you create the database note the location of the .mdb and .ldf file.
once this had created right click on your new database > tasks > restore database
in the new window select from device and point it to your .bak file created from your 2000 system, ensure you put a tick in the restore box on the new line.
in the options tab tick overwrite database, and, change the file locations in the restore as directory to the file locations of the new database. the file names must be the same too.
you can change the original file names after the restore.
that should do the trick.
thanks,
mike

SQL 2000 AND SQL 2005 ON THE SAME SERVER

Similar Messages

Maybe you are looking for