Issue while submitting concurrent program from OAPage

Hi Team,
In OApage in One LOV field is der. From that LOV we need to select one concurrent program and click next button. while clicking on the next button i am getting error like below
The data that defines the flexfield on this field may be inconsistent.
Inform your system administrator that the segment referred to by the flexfield bind variable
:$FLEX$.PFCPA_JOB_NUMBER.ID:NULL could not be found.
Make sure this variable references the segment or value set name of a prior segment
in the flexfield structure. This flexfield bind variable is in either a WHERE clause in a table-validated value set,
or in a default value for one of the segments of this flexfield.
Please help me in this issue.
Thanks,
Rajashekar

Similar Messages

Error While Submitting Concurrent Program

Hi all,
While submitting Concurrent Program in HRMS to check the Seeded Output,I am getting the following Message
app-fnd-00314 invalid printer ( not print ) and print style (ZA PS Portrait) combination.
Could someone please tell me How could I figure it out.
Thanks & Regards

914618 wrote:
Hi all,
While submitting Concurrent Program in HRMS to check the Seeded Output,I am getting the following Message
app-fnd-00314 invalid printer ( not print ) and print style (ZA PS Portrait) combination.
Could someone please tell me How could I figure it out.
Thanks & RegardsWhat is the type of the concurrent program?
Are you printing to specific printer or to noprint?
Please see the solution in these docs.
Accrual Reconciliation Report Errors With APP-FND-00314 Invalid Printer And Print Style Combination [ID 564009.1]
Cash/Bank Book Report Error APP-FND-00314: "invalid printer and print style inloc_bacs” [ID 551975.1]
Quarterly Tax Return Worksheet (Form 941) Fails With APP-FND-00314 [ID 307701.1]
Thanks,
Hussein

Issue while calling COBOL program from Component Interface in PeopleSoft HRMS 9.2

In HRMS 9.2, I am facing problem while calling the remote call function through component interface. In GP_ABS_EESS_REQ (Navigation Main Menu > Self Service > Time Reporting > Report Time > Absence Request) component, we have “Forecast Balance” button as shown below:
This button checks for eligibility for leave being applied. While using component interface, it executes FORCAST_PB field change event peoplecode which contains a remote call to a cobol program as below:
RemoteCall("PSRCCBL", "PSCOBOLPROG", "GPPOLRUN", "NET_RETURN_CD", &NET_RETURN_CD, "NET_TXN_ID", &NET_TXN_ID, "NET_TXN_NUM", &NET_TXN_NUM, "NET_MSG_ID", &NET_MSG_ID, "NET_MSG_PRM_CNT", &NET_MSG_PRM_CNT, "NET_MSG_PRM1", &NET_MSG_PRM1, "NET_MSG_PRM2", &NET_MSG_PRM2, "NET_MSG_PRM3", &NET_MSG_PRM3);
I am getting following error while executing it via component interface:
(2,148) - Think-time PeopleCode event (RemoteCall), but a SQL update has occurred in the commit interval. (2,148) FUNCLIB_GP_ABS.FCST_PB.FieldFormula Name:Abs_ForecastExec PCPC:5311 Statement:60
Called from:GP_ABS_EESS_REQ.GBL.DERIVED_ABS_SS.FCST_PB.FieldChange Statement:26
(91,34) - Error changing value. {Z_GP_ABS_EESS_REQ_CI.FCST_PB} (91,34)
(18,2) - Data being added conflicts with existing data. (18,2)
(91,37) - Error saving Component Interface. {Z_GP_ABS_EESS_REQ_CI} (91,37)
After commenting out this line of code, I was able to save the CI successfully. But I need to execute this statement before saving CI so that I can check the eligibility for leave being applied. Can anyone help me on this issue?

When I tried to read the file using `CAT -vt <filename>`, I could see that the file contains special characters such as ^M and ^I. This may be because of the file transfer mode(but I transferred in ASCII mode, still the special characters where appearing).
I opened a VI editor and pasted the same script. Save the file, tried to run the script, It was working fine.
I still didn't get how the special characters appeared. I used notepad++ as my editor.

Ora-0000 when submitting a concurrent program from DB trigger

Hello,
I am getting following error when submitting a concurrent program from a trigger.
ORA-20002: ORA-20026: 10322991ORA-0000: normal, successful completion
ORA-06512: at "APPS.NPX_RUN_PICKR", line 63
ORA-04088: error during execution of trigger 'APPS.NPX_RUN_PICKR'Though, this indicates normal successful completion, it does not generate any request_id. Nor, it launches the concurrent request.
Below is the trigger code. Any idea why this is happening? Thanks, R
CREATE OR REPLACE TRIGGER APPS.NPX_RUN_PICKR
AFTER INSERT
ON APPS.NPX_PICK_RELEASE
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
   p_printer        VARCHAR2 (240);
      p_print_flag     BOOLEAN;
      --concurrent_request variables
      l_request_id     NUMBER;
      --initializing variables
      l_app_id         NUMBER;
      l_resp_id        NUMBER;
      --pick_release variables
      v_out            VARCHAR2 (500);
      lorg number;
     errx varchar2(2000);
     p_message varchar2(2000);
     result boolean;
   BEGIN
      p_printer := fnd_profile.VALUE ('PRINTER');
      p_print_flag :=
         fnd_request.set_print_options (p_printer,                  -- printer
                                        'LANDSCAPE',                  -- style
                                        0,                           -- copies
                                        TRUE,                   -- save output
                                        ''                   -- print together
                                       result:= FND_Request.Set_Mode(TRUE);
      l_request_id :=
         fnd_request.submit_request (application      => 'NPX',
                                     program          => 'NPXIBOXPICK',
                                     description      => NULL,
                                     start_time       => NULL,
                                     sub_request      => FALSE,
                                     argument1 => :New.order_number,
                                     argument2 => :New.org_id
      IF l_request_id = 0
      THEN
         errx := sqlerrm;
         p_message :=:New.Order_Number ||errx;
                  raise_application_error
                   (-20026, p_message);
      end if;
exception when others then
errx := sqlerrm;
raise_application_error(-20002,errx);
end;

Hello Hussein,
It is 11.5.10.2.
The line 63 represents following block
IF l_request_id = 0
      THEN
         errx := sqlerrm;
         p_message :=:New.Order_Number ||errx;
                  raise_application_error
                   (-20026, p_message);
      end if;Thanks,
R

Unable to use the Copy function while submitting the program for XML output

Hi
when i submit the concurrent program with XML output type, getting the output..
when i submit he concurrent program using the copy button not able to get the output,
my observation
while submitting the program the xml template is not called....
Diagnostics--> view xml -- able to view the ouput.
do let me know if any of the steps is missing while registration in the xml responsibility..
this is only with the custom conc program.. the standard program is working fine...
do help me out..
Regards
Yram

It's really a little difficult to answer your question without a bit more information. What version of JDeveloper are you using? What's your technology stack?
If this is JDeveloper 11+g+, with the Fusion technology stack, you can use a technique like the one described here:
http://groundside.com/blog/GrantRonald.php?title=jdeveloper_11_business_services_cascadin&more=1&c=1&tb=1&pb=1
If it's JDeveloper 10.1.3, with the default Web technology stack, look here:
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#62
If, as it looks like, this is really a question about generic JSPs (no JSF), you might actually have a bit more success on a generic JSP forum--using scriptlets hasn't really been best practices within JDev since...well, since JSTL became available, really. That was a number of years ago.
Like I said, there's really no direct way to use Javascript output in a scriptlet--unless you mean something like storing Javascript output in a hidden field, and using the value in a scriptlet on the next request. But by the time Javascript runs, any scriptlet from the current request will already have executed.

Problem running a concurrent program from Reports

Hi,
I've come across a problem while running a concurrent program from Reports. The report is executed OK and at the end, I call a concurrent program by firing fnd_request.submit_request. I catch then the req_id returned and it gives me 0. I tried to replace the concurrent program, which is a UNIX shell script, with just a simple script that echos "hello", but anyway, I get 0 as return value from fnd_request.submit_request.
The next step I tried to set apps_initialize with proper vUSER_ID, vRESP_ID and vRESP_APPL_ID, but did not get away with that. My last try was to hardcode vUSER_ID to a sysadmin user, in case this was rights-related issue but did not work as well.
Am now looking into a possibility of actually getting the error, why it failes. I found some posts where FND_MESSAGE.RETRIEVE and FND_MESSAGE are used but this apparently does not work under Reports (am using reports builder v. 9.2.0.4.0).
Any suggestions how to solve this issue?
Thanks,
David Lacina.

Hi,
Make sure that the concurrent program you are calling exists (case sensitive) and is enabled.
Create a PL/SQL package and use that to call your request - the you'll be able to use fnd_message.
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

I want to submit a concurrent program from pl/sql. Please help me.

Dear all,
I want to submit a concurrent program from pl/sql. But I failed. Please help me.
Detail:
I create a concurrent program in 'Cash Management, Vision Operations (USA)' responsibility. And it be submitted success in EBS.
Then
I create a test script in pl/sql. And use 'FND_GLOBAL.APPS_INITIALIZE' to initialize ebs, then use 'FND_REQUEST.SUBMIT_REQUEST' to submit
the consurrent program, But the procedure aways return 0.
I cannot found the reason. Please help me.Thanks.
Attached informations may describe the problem:
1.The concurrenct submitted success in EBS.
request_id = 4750655 (Sorry, I dont know how to add pictures.)
2.The initialize informations which from SQL.
SELECT FCR.REQUESTED_BY USER_ID
,FCR.RESPONSIBILITY_ID
,FCR.RESPONSIBILITY_APPLICATION_ID
,FA.APPLICATION_SHORT_NAME
,FCP.CONCURRENT_PROGRAM_NAME
FROM FND_CONCURRENT_REQUESTS FCR
,FND_APPLICATION FA
,FND_CONCURRENT_PROGRAMS FCP
WHERE FCR.PROGRAM_APPLICATION_ID = FA.APPLICATION_ID
AND FCR.CONCURRENT_PROGRAM_ID = FCP.CONCURRENT_PROGRAM_ID
AND FCR.REQUEST_ID = 4750655;
Result: user_id = 1318;
responsibility_id = 50579;
application_id = 260;
application_short_name = 'CE';
program_short_name = 'CALLK009';
3.The test script code.

-- Created on 2008/10/22 by ERIC
declare
-- Local variables here
Wv_conc_req_id VARCHAR2(10) DEFAULT NULL;
BEGIN
FND_GLOBAL.APPS_INITIALIZE(
1318
,50579
,260
Wv_conc_req_id := FND_REQUEST.SUBMIT_REQUEST(
'CE'
,'CALLK009'
,NULL
,SYSDATE
,FALSE
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
, CHR(0), CHR(0), CHR(0), CHR(0), CHR(0)
DBMS_OUTPUT.PUT_LINE(Wv_conc_req_id);
COMMIT;
end;
4.The concurrent program code.
create or replace package body CALLTEST is
PROCEDURE T1(PvO_errbuf OUT VARCHAR2
,PvO_retcode OUT VARCHAR2)
IS
BEGIN
FND_FILE.PUT_LINE(fnd_file.log, 'TEST');
END;
end CALLTEST;


Can you check from which schema you are executing FND_REQUEST? You can try as follows;
Connect to your required schema, create a synonym on apps.fnd_request, connect from apps and finally execute grant all on apps.fnd_request to all.
You can check for relevance from Doc ID: Note:147495.1
Please do keep in the mind the soultion above should be applied to a test/dev EBS instance first.
I hope this would be of help.
Saad

Problem in calling order import concurrent program from BPEL

Hi all,
Iam doing a sales order creation in oracle apps using Apps Adapter.
I have successfully inserted the order into the interface tables using an Apps adapter.
Now I need to run Order Import program from BPEL to move the data from interface tables to the base tables for which i use another Apps Adapter.
When I invoke the OEIMP concurrent program from BPEL ,request id is returned.But the concurrent program fails showing incomplete parameters.
But it works when I invoke it from the front end in oracle apps.
I think the problem lies in passing the inputs to the concurrent program from the BPEL.
Any help to solve the issue will be appreciated.
Thanks,
goutam

Previously, I was passing the values to the concurrent program variables through ASSIGN component,which resulted in some namespace issues.Then I replaced it with TRANSFORM component.
Also,First I assigned the values to the concurrent program variables as 'Vision Operations'(operating_unit), 'Online'(order_source) ,No (validate_only), No (validate_desc_flex) which are mandatory and just left non mandatory variables without assigning values.
I changed those values as *'204','0','N','N'*. And also set non mandatory variables value as EMPTY.
After doing all these I found the concurrent program catches all the parameter values correctly, and the records got imported from interface tables to the base tables.Thus the sales order got created successfully.
Thanks,
goutam

Trying to invoking Concurrent Program from BPEL (How to change Resp n WSDL)

Hi,
I am trying to invoke a concurrent program from my BPEL process using Oracle Apps adapter. When i am using this adapter, it is not showing the required concurrent program in open interface folder. It showing only few but not one which i am trying to invoke. Can anybody explain me what is the issue with my apps adapter.
I am using apps schema for adapter.
Please explain me the below Queries.
1. Is apps schema enough to configure and get the required concurrent program for adapters?.
2. After creating apps adapter, in wsdl file it is showing apps user as : SYSTEM and Responsibility as : System Administrator. How can i change this responsibility to the required responsibility whihc can run my concurrent program.
I am not sure about system administrator responsibility can able to run the required concurrent program.
Regards,
Rs.

First of all does this scenario occur again.
"Works first/second time. Later gives this error."
After you restart the SOA server are you able to reproduce this scenario?
As already pointed out and from the error message, database connection is reset.
If you find this error again, try this out.
em -> home / oc4j_soa -> Administration -> JDBC Resources
Use the "Test Connection" option for the Connection Pool that you are using for your database JNDI.
It comes back and say "Connection to "XYZCP" established successfully." it is good to use.
Run the BPEL process again and once you find the error, come back and test the connection.
If it comes back with Error, diagnose based on the error message received.
Cheers
Kalidass Mookkaiah
http://oraclebpelindepth.blogspot.com/

XML Pub enabled concurrent program --- from self-service responsibility

How do I run XML publisher enabled concurrent programs from a self-serivce responsiblity?
Is there any document/whitepaper on this issue?
Thanks

Same way as you define any other concurrent program.
Define Executable based on this JCP. Concurrent>Program>executable
Create report Definition based on this executable from Concurrent>Program>Define.
Include this report definition to respective report set.

Run Child Concurrent Program from Main Concurrent Program

Hi,
I'm trying to run Child Concurrent Program from the Main Concurrent Program as below, could you suggest me on below.
Database:10g
Main_Concurrent_Program
=================
1) Will update staging table XXID_PO_ITM with Batch_id = 1,2,3,4,5
This staging table has 1000 rows, so every 200 rows will be updated with one of the above batch_id
This logic is working.
Child_Concurrent_Program
================
2) Above Main Concurrent Program should call below Child_Concurrent_Program.
This Child_Concurrent_Program will have parameter batch_id (based on above batch_id)
So, this Child_Concurrent_Program should kick off with batch_id = 1
Simillarly, Child_Concurrent_Program should kick off with batch_id = 2
Child_Concurrent_Program should kick off with batch_id = 3
Child_Concurrent_Program should kick off with batch_id = 4
Child_Concurrent_Program should kick off with batch_id = 5
Could you give me some suggestions on this?
Thanks.

Check with FND_SUBMIT for submitting a concurrent job using child dependecies. Keep in mind, that once you call the API ... it spawns it's own thread and and becomes an autonomous process. Control is no longer maintained within the calling package.
procedure submit_interface_data(p_schedule_date in date,p_mm_header_id in number,p_req_id out number)
is
v_user_id number;
v_application_id number;
v_responsibility_id number;
begin
 select user_id
 into v_user_id
 from fnd_user
 where user_name = 'USER123';
 select application_id,
 responsibility_id
 into v_application_id,
 v_responsibility_id
 from fnd_responsibility_tl
 where responsibility_name = 'General Warehouse';
fnd_global.apps_initialize(v_user_id,v_responsibility_id,v_application_id);
p_req_id := fnd_request.submit_request ( application => 'XYZ',
 program => 'MOVE_CONC_SHORT_NAME',
 description => null,
 start_time => p_schedule_date,
 sub_request => false,
 argument1 => p_mm_header_id);
commit;
exception
when others
 then
 spl_log_pub.write_exception(transaction_id => null,
 transaction_type => null,
 error_message => '<some error message>' ||
 'sqlcode: ' || sqlcode ||
 'sqlerrm: ' || sqlerrm);
end submit_interface_data;Edited by: sreese on May 18, 2012 3:16 PM

FNDLOAD: How to remove a concurrent program from a request group

Hi,
I want to remove a concurrent program from a request group using FNDLOAD utility. Since impacted environment is Production (controlled environment) I do not want to remove concurrent program manually from the request group. Is there a way to use FNDLOAD utility for this purpose or some other means?
Environment: Oracle EBS R12.1.1
OS: Linux
Thanks,
Nitin

Hi,
Unfortunately this CP cannot be disabled as it has to be removed from certain RGs but not all. Also removing it through RG forms is always an option but production gatekeepers won't allow to do that. I would have done that in a min.
If FNDLOAD is not an option then I guess only other option is pl/sql script.
Best regards,
Nitin

How to call a concurrent program from a Custom JSP page.

Hi,
I have a custom JSP page which i have deployed by creating a form function with the path of the JSP Page
and added the JSP Page to the OA_HTML top.
Now, i need to call a concurrent program from the JSP Page, i have all the parameters in my page and i am using the standard class as below:
ConcurrentRequest cr= new ConcurrentRequest(con);
int requestId= cr.submitRequest("XXINV",programName,null,null,false,vec);
I have verified my connection object and it is OK but i am getting the exception that user is not set to run the program.
I tried the below code in my JSP page and getting -1 for all test variables :-
int userId = wctx.getUserId();
int respApplId = wctx.getRespApplId();
int respId = wctx.getRespId();
I think i need to set the context in JSP page to run the program..
Pls help ....
Regards
Saurabh Jaiswal

Hi,
Thanks for the reply,,,
This is a possible solution but this will allow to run the program anyhow.
But the procedure which i call thru callable statement will start with
fnd_global.apps_initialize (3825, 50603, 704);
fnd_request.submit_request API call.
Now, the values of user and Responsibilty is required in the program and it changes.
With this approach we have to hardcode the user and resp.
The same JSP page is attached to other responsibilities and there the concurrent program would get fired as if fired from the resp Id hardcoded as above.
Need to capture user Id and RespId.
How can i set the apps Context in JSP page???
Regards
Saurabh Jaiswal

How to EXPORT a concurrent program from one instance to another

Hi,
I am new to EBS.
How to EXPORT a concurrent program from one instance to another. I dont want to use FNDLOAD.
Is there any other way from where we can export the concurrent program to anothere instance from CLIENT connection server.
Thanks
Asis

Hi;
What is EBS version? Why you dont use FNDLOAD?
Pelase see below thread
Move concurrent program to prod
Move concurrent program to prod
Regard
Helios

How to run a Concurrent Program from the back end?

Hi,
How to run a Concurrent Program from the back end?
Is it Possible to see that Concuurent Request id which we run from the back end, in the front end?
If yes, then Please Give reply how to write the code
Thanks in Advance,
Bharathi.S

This is documented in Chapter 20 of the Application Developers Guide http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121devg.pdf. These MOS Docs also have some information available
221542.1 - Sample Code for FND_SUBMIT and FND_REQUEST API's
235359.1 - How to Launch Planning Data Pull MSCPDP using FND_REQUEST.SUBMIT_REQUEST
HTH
Srini

Issue while submitting concurrent program from OAPage

Similar Messages

Maybe you are looking for