Issue with AP Auth List

Hi guys,
I'm havin problems joining an AP (3602I) to my controller (5508) when authorising MIC's against against my auth-list on the controller.
I have added the AP MAC address to the auth-list but the AP won't successfully join. The controller occasionally says "joined" and I can view it in the AP list, but the AP status is always UNKNOWN, whereby I will reset the AP and try again.
Any ideas?
Thanks.

show inv:
Burned-in MAC Address............................ E8:B7:48:A1:CD:A0
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 100
NAME: "Chassis"    , DESCR: "Cisco 5500 Series Wireless LAN Controller"
PID: AIR-CT5508-K9, VID: V01, SN: xxxxxxxxxx
AP sh ver:
AP78da.6e42.85ca#sh ver
Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 30-Jul-13 22:57 by prod_rel_team
ROM: Bootstrap program is C3600 boot loader
BOOTLDR: C3600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(23c)JY, RELEASE SOFTWARE (fc1)
AP78da.6e42.85ca uptime is 22 minutes
System returned to ROM by power-on
System image file is "flash:/ap3g2-k9w8-mx.152-4.JA1/ap3g2-k9w8-xx.152-4.JA1"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP3602I-E-K9 (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
Processor board ID FCZ1749J1KS
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 7.5.102.0
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 78:DA:6E:42:85:CA
Part Number                          : 73-14521-02
PCA Assembly Number                  : 800-37501-02
PCA Revision Number                  : A0
PCB Serial Number                    : FOC17444F2D
Top Assembly Part Number             : 800-35852-02
Top Assembly Serial Number           : FCZ1749J1KS
Top Revision Number                  : C0
Product/Model Number                 : AIR-CAP3602I-E-K9
Configuration register is 0x
WLC software version: 7.5.102.0
FUS: 7.0.112.21
Thanks again Scott.

Similar Messages

Hi am having issues with getting the list of users from the Active Director

Hi am having issues with getting the list of users from the Active Directory, can anyone help me with this!

Hi Jason,
Try this:
1. In Ultiboard select Tools>>Netlist Editor>>Pins, press the Delete button
2. Select all nets in the Select the Net to Delete dialog and then press the Delete button. This will clear all nets in the layout, don't worry all traces, parts are still on the design.
3. Go to Multisim and select Transfer>>Forward annotate to Ultiboard. This will add all nets that you removed back and it should fix the pin problem
Tien P.
National Instruments

Flex Table Add Row Issue with Dynamic Entry Lists in Visual Composer

All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
Freek

Hi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni

Flex Table Add Row Issue with Dynamic Entry Lists

All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
Freek

Hi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni

LCM issues with Workflow, Task Lists, etc.

I have found several issues with migrating certain artifacts using LCM v11.1.1.3. Note that I have admin rights in all systems, and that there are no special characters involved. So...
1) Workflow: when migrating Planning Units all of them migrated, including their statuses. But not all PU comments (<annotation>) and logs (<log>) nodes migrated. It happened to almost all users - some who had 1-2 comments in the source system haven't got any in the target one, some got migrated only few (e.g. out of 5 in source, they got 3 in target). Since it happened to all users, it doesn't seem to be security. I have also checked (for those who partially failed) some other nodes, sequence, action, process state - they all seem to be OK. One curiosity I've spotted in few cases, is that in source LCM file (.xml) "priorOwner" node has the name of the user I am investigating, while in the target file (taken after the migration), for that same PU, that node is empty, actually says "null".
Any ideas why this might be happening?
2) Task Lists: when exporting TLs (in LCM) on occassion <dataForm> node in XML file would be missing for the task that actually has it attached. Again, no special characters are used, and I am admin. Then I tried to use TaskListDefUtil, and even if that list has required node, when I try to import, the task is still not attached to the form. I had to delete all TLs, then use Util files to reimport.
Anyone with similar experiences?
smilo

I had issues with tasks lists using LCM in instances where parent task name was same as child task or a task has same name planning web forms. You might also find issues with exporting webforms with business rules attached to forms where form is on plan type A and business rule is on plan type B. In this case, after LCM import, plan B business rule will lose location reference to correct plan type and get associated with web form plan type. In this case you will need to attach business rules again.

Contacts issues - send contacts to at&t phone book or sim card? and un able to unsync email contact list with phone contact list

I have had several issues with my contacts on this phone. I cannot figure out how to send my contacts to the at&t phone book or to my sim card. The options/menu button in contacts is completely useless. It should give me the option on the sim card to transfer contacts form one list to another. I have already written on another forum about the contact list not letting me unsync one of my email contact lists and how I have 3 copies of all of my contacts because my email contacts are mixed in with my phone contacts.
BB really needs to fix this issue with the contact list because it is beyond frustrating. I even downloaded the new BB software today and it still hasn't been fixed.

OK...so this post is strictly about wanting to send your contacts to the SIM. That capability is one at a time only. And there's a reason for that.
The BB Address Book is robust, allowing you to have one name with multiple phone numbers and addresses. The SIM phonebook, on the other hand, is much less capable...if, for instance, you have one contact with three phone numbers in your BB Address Book, the SIM phonebook would require three separate entries to contain the same data (with the obvious duplication of the name on three separate records).
So, I must ask...why on earth do you want to send your contacts to your SIM? There are much better methods for moving your contacts from the BB to somewhere else...
Let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

Issue with the presence indicator in list/library web part.

When viewing a user field (Created By, Modified By or a custom People column) through the list web part (either through the default page /Forms/AllItems.aspx or a custom web part page using a list/library) the presence indicator always says presence unknown.
However if I go to the Site Permissions on the same site, or My Site or a custom page using a modified core search results web part I wrote the presence indicator works fine. I can't find any errors being reported on the server.
Looking at the rendered code the list web part generates:
<IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn_48683,type=smtp alt="No presence information" src="/_layouts/images/blank.gif" border=0 sip="[email protected]">
Locations where the presence indicator works the code is:
<IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn{20140822-1752-098D-8C11-188AD0B8B8B6},type=sip alt=Available src="http://portal.mydomain.com/_layouts/images/imnon.png" border=0 sip="[email protected]" valign="middle">
It appears that the List web part is not detecting that the users have a sip address and they appear to be rendered using smtp instead. It's also odd that the list web part is pulling the correct sip address while the one that works is pulling the
email address, not the sip address stored in the user profile. I spent considerable time going through the xslt to try and figure how the tag is rendered but I haven't been able to figure it out.
We are using Cisco Jabber 9.2.3 for IM, I don't know if that should make a difference or not. It's working fine in other parts of SharePoint and in Outlook. Running SharePoint Dec 2011 CU (14.0.6114.5000) with MS Office 2010 SP2 installed on the client. Tested
in IE 9.0/10/11.
Any ideas?

We don't have a Lync server and I don't have the software available. Are you saying just having Lync installed even though it won't work might help?
I did some more digging and believe that this is an issue with the XsltListViewWebPart. If I go to the UserInformationList the web part used to render the list is the ListViewWebPart and the presence indicator works there. Also our environment
was migrated from 2007 and there are a number of pages that are using the old ListViewWebPart and the presence indicator works fine in this part. If edit the page and add the same list library to it, it's added as a XsltListViewWebPart and the presence
indicator does not work.
The presence control is not rendered by the xsl files used by the webpart. I modified the xsl to display the raw xml and the html code for the presence is part of the xml. I'm guessing this can't be changed and is part of how SharePoint is rendering
the data for the XsltListViewWebPart. You can see the Editor and CheckoutUser lines have the html code embedded in the data.
<Row
ID="60"
PermMask="0x7fffffffffffffff"
HTML_x0020_File_x0020_Type=""
File_x0020_Type="xlsx"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapall="icxlsx.png|Microsoft Excel|SharePoint.OpenDocuments"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapcon="SharePoint.OpenDocuments"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapico="icxlsx.png"
serverurl.progid="1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
ile_x0020_Type.progid="SharePoint.OpenDocuments.3"
File_x0020_Type.url="FALSE"
FSObjType="0"
FileRef="/sites/BPIT/Shared Documents/Database Sizes.xlsx"
FileRef.urlencode="%2Fsites%2FBPIT%2FShared%20Documents%2FDatabase%20Sizes%2Exlsx"
FileRef.urlencodeasurl="/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
FileLeafRef="Database Sizes.xlsx"
FileLeafRef.Name="Database Sizes"
FileLeafRef.Suffix="xlsx"
CheckoutUser="<a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_77,type=smtp'/></a><a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a>"
CheckoutUser.id="526"
CheckoutUser.title="Ian Howe"
CheckoutUser.span="<a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a><img border="0" height="1" width="3" src="/_layouts/images/blank.gif"/><a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_78,type=smtp'/></a>"
CheckedOutUserId="526"
IsCheckedoutToLocal="0"
Created_x0020_Date="0;#2014-08-22 09:47:01"
Created_x0020_Date.ifnew=""
ContentTypeId="0x0101000AE0EC76CD0DB743B42D2FE022EAA6DC"
Modified="8/22/2014 10:51 AM"
Editor="<a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_79,type=smtp'/></a><a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a>"
Editor.id="526"
Editor.title="Ian Howe"
Editor.span="<a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a><img border="0" height="1" width="3" src="/_layouts/images/blank.gif"/><a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_80,type=smtp'/></a>"
ecb.dispex="return DispEx(this,event,'TRUE','FALSE','FALSE','SharePoint.OpenDocuments.3','0','SharePoint.OpenDocuments','','1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx','526','526','1','0','0x7fffffffffffffff','','')" />
I just find it strange that the old ListViewWebPart works. Our SP environment has not been patched to the latest version, I'll try that next and see if it makes a difference.

IS there a way to fix the issue with text list boxes where they shift (empty space is smaller than the text size) when two text lsit boxes are side by side?

Currently I have a webpage I designed for a company where I have multiple text list boxes side by side for the purpose of displaying data in each one based on a category in the database. So a text list box for the primary key, name, serial number, etc. I have to use Firefox as it typically works best for printing and functionality for the page. The single issue we are having is that in Firefox if the field is null as far as text the text are shrinks meaning all the data in that list box shifts up and is no longer in line with its congruent data in the other text list boxes. In other browsers that's not a problem and everything stays lined up regardless of whether there's text in the box or not.
Unfortunately I cannot provide a link but if contacted I will provide screen shots.

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. 
http://forums.mozillazine.org/viewforum.php?f=25 
You'll need to register and login to be able to post in that forum.

List of issues with DM6.0

Here's my list of issues with Desktop Manager 6 that I would like to see addressed.
1) No minimize to system tray. This isn't a huge deal but I'd like to see it return.
2) Halt incoming e-mail to device when connected. This needs to come back. I don't need my Blackberry buzzing on my desk every two minutes when I'm sitting in front of my e-mail client.
3) Folder sync selection. My mail server has rules that automatically sort incoming e-mails into different folders. I'm pretty sure practically everybody in an enterprise e-mail environment does this. In previous versions of DM, there was an option to choose which folders to sync. This is now gone, although I believe because these settings end up stored on the BES server my settings have remained for now. Moving forward, I can't change any of them without talking to our BES administrator.
4) Automatic backup is broken. I've set DM to automatically backup my device "Weekly" when it is connected. What actually happens is every time I connect my blackberry it gets backed up - this can happen multiple times in one day. Pretty useless.
5) Mass storage mode settings on blackberry are bypassed. I have my bb set to prompt whether I want to enable mass storage mode when I connect it. Now, when I connect my bb it immediately enters mass storage mode without a prompt on the device or on the desktop. I have this configured because if you use any kind of custom ringtone, even if it is stored on the internal memory and not on the media card, as soon as mass storage mode is enabled the bb cannot access the files internally and ringtones default back to a standard generic one. I can no longer wander away from my desk and hear my phone ringing and identify that it is my phone.
That's my current (growing) list of issues. I will update with more, if anyone wants to confirm these issues or add others I will add to the list as well.

you need to add media administration is non existent without Roxio Media Manager. You can no longer pick and choose which files to exchange. Synching is the only option.
Also, if media files are encrypted, DM 6 cannot read them. This was dealt with in Roxio Manager by simply inputing the encryption password...

Long list of issues with CP5 project

I've been working on a project for the past few weeks and its nearing completion. A couple of things have happened which seem to have completely messed up the project. On the surface all looks well but when you actually use it, major usability issues emerge. I've listed the problems below. Would appreciate any advice if possible. Am using CP5 (latest update applied) on an XP pc.
1. Throughout the project development I've been publishing to html to test it. All was working fine until I decided to trial a scorm export. When I selected Quiz Preferences to enable scorm reporting, CP locked up. I was then presented with the top strip of the Preferences menu window with the rest missing. This was a blue strip which ran right across the screen and onto my second monitor. I couldn't close it or escape it, or select anything beneath. So I had to force quit, no choice really.
2. After the force quit I restarted CP and managed to enable scorm reporting. I tested an export (to zip), deployed on my Moodle site and all worked fine. I then noticed I needed to change a few details so went ahead and made these (all I added was a title for the scorm manifest). When I exported again, I ran into problems with my embedded flv videos, saying they were corrupt (which they weren't). I eventually got round this by exporting the zip to its own folder (had been exporting to the main folder containing the CP project file... obviously not a good thing). The exported scorm file is about 74MB.
3. After all the above issues with the videos were sorted, I tested the scorm export and immediately ran into a whole rang of problems. Every single object that had a fade in & out affect had to have it removed as they were greyed out. My embedded videos were barely visable, looking like they'd been set to a 20% opacity in Pshop. Could still be played though, if you could find the play button. The opening slide decided to immediately fade once the scorm pack launched, despite never setting to do anything of the sort. I had to take a copy of another slide and recreate the front slide, then delete the old one. This seems to have fixed that issue. Now my final slide (which follows on from a Quiz Result slide) has decided to do an immediate fade in & out, so you can't read the text. Again I never told it to do that. All objects on the page have effects/transitions off but this hasn't had any affect at all.
4. I have also found a very very odd pattern of behaviour with Click boxes used as links to web sites. I have 8 links on a slide (text boxes with text blue colour & click boxes overlaying). Clicking on the 1st two links works fine, opens them in a new window. Clicking on the 3rd, nothing happens. A 2nd click loads the web page. When you close it you find yourself on the next slide and have to go back. The same pattern occurs for the next 3 links. Very very odd.
5. The other really annoying problem is with my next & back buttons. If I navigate through the package and then click back a few slides (or even go back 1 slide), I can't go forward again. I have to refresh the page. I've also found if I go back to the opening slide its greys outs completely, nothings visable. Again you have to guess when the next button is to move forward. The nav buttons are simple set to "go to next slide" and ticked infinite. This problem completely ruins the who package making it unuseable.
I'm starting to think something has corrupted my project. If its not that then its CP being buggy. One thing I do know is its one of the most sluggish Adobe apps I've ever used. If I can't fix these issues the course won't be useable and I'll have to start from scratch with something else.

Hi there. Welcome to the forum. Sounds like you've had a bad day.
Since no one else has chimed in yet, I'm going to suggest that you get rid of your Preferences file and let Captivate regenerate this, just in case it resolves some of the glitches. This preference file can get corrupted and cause all kinds of weird behaviour. So what I'm suggesting here might sound a bit radical but it's often proven to be successful for Cp weirdness issues.
Here's an explanation I've copied from another post by the eminent Captiv8tr:
You might try clobbering the preferences file. If you look in the following location, you should find the file named captivate_40.dat. Just Close Captivate, delete the file and restart Captivate.
To locate this file, right-click your Start button and choose Explore. This should easily get you in the general area. If you look at the parent folder you should see Application Data. (you may need to configure Windows Explorer to show you this folder) Inside the Application Data folder should be an Adobe folder. And inside the Adobe folder should be the Adobe Captivate folder. And inside this folder should be the file.

Laundry list of issues with ARD 3

I am running the client on aprx 200 systems across multiple subnets (our network is arranged with floor by floor subnets). I was having the very same issues with ARD 2 (and 1 for that matter).
Cannot update client from 2.2 to 3 on multiple systems.
the command either stalls at the "preparing to copy" prompt or fails after the copy finished . I have updated about 2/3 of he 2.2 clients but cannot get the last ones to go.
All Computer list does not refreshing properly.
is there a way to force a refresh of the list? the refresh button does nothing.
Cannot generate reports from the version 3 clients.
I have re-installed ARD
cannot set a remote task server.
I put the server in the field and it blanks the field.

"Cannot update client from 2.2 to 3 on multiple systems."
Ensure the clients are running 10.3.9 or later. If not, update them.
"cannot set a remote task server."
Are you using a second copy of RD Admin application? You cannot use an installed copy of ARD with the same serial number as your installation. You must purchase an additional license.

List of issues with patch level

Is there a list of application errors reported for each patch level?
When working with SAP R/3, there is a SAP note released for each patch level which states the changes delivered in that patch as well as what fixes are delivered. Therefore, it is easy to see what application errors exist in each patch level. Is there something similar for SAP Business One?

There are also notes for those Lists of issues with each patch level for B1. What is your B1 version and PL?
Thanks,
Gordon

[svn:fx-trunk] 12982: Fix for issue with exposing accessible names for combobox list items

Revision: 12982
Revision: 12982
Author:   [email protected]
Date:     2009-12-15 20:44:23 -0800 (Tue, 15 Dec 2009)
Log Message:
Fix for issue with exposing accessible names for combobox list items
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ComboBoxAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ListBaseAccImpl.as

Add this to the end of your nav p CSS selector at Line 209 of your HTML file, after 'background-repeat...':
margin-bottom: -2px;
Your nav p will then look like this:
nav p {
          font-size: 90%;
          font-weight: bold;
          color: #FFC;
          background-color: #090;
          text-align: right;
          padding-top: 5px;
          padding-right: 20px;
          padding-bottom: 5px;
          border-bottom-width: 2px;
          border-bottom-style: solid;
          border-bottom-color: #060;
          background-image: url(images/background.png);
          background-repeat: repeat-x;
          margin-bottom: -2px;

Perfomance issue with SharePoint List.

Current System:
Our application (for submitting and publishing articles) is using WSS 3.0
to store content and host workflows.
Article content like PDFs, Images & Videos are stored in a SharePoint document library.
There is also a list in which we have configured a custom state machine workflow. While creating an list SP item from the UI, instance of the configured workflow instance will be triggered and start monitoring.
Each article belongs to a Journal. We have TBs of data stored in content databases. Initially there was only one site collection (“http://<myweb:8080>/ArtcleLibrary”) and entire article data was storing it the same document library.
Later we decided to split the document library based on journal.
To achieve better scalability, we have now changed the application architecture by creating site collection for each journal and keep article content (there are many articles in a journal) in corresponding site collections. We have added more content databases
and sites collections are equally distributed among these Dbs.
Now it is like (“http://<myweb:8080>/<journalID>/ ArtcleLibrary”)
Actual Problem:
We have achieved scalability in the case of content management by splitting document libraries among different site collections and content databases.
But still the SP list for managing workflow is in the initial site collection (“http://<myweb>:8080/WorkflowTasks”). This single list contains now 60,000 items (=60,000 workflow instances) even if we deleted completed list items older than 3 months.
We have performance issues with the current workflow list. It is taking time (avg 20s) to create/read list item from the SP List. Sometimes items are not getting created in the list item.
From MSDN I came to know than there are recommended count for items in SPList (2000
or 5000 items).
What is the best solution to solve the above performance issue with SharePoint list?
Whether the above mentioned our approach to document library will work for SP list also (means split current SP List and keep in each Journal site collection)?
Please advise.

Hi Andrew,
Thanks for your post.
I still have some doubts.
If we go like this, will OWSTIMER be able to handle workflows (custom workflow is attached to SP List) of these many site collections. We have now more than 600 site collections.

Issue with AP Auth List

Similar Messages

Maybe you are looking for