Issue with complete refresh on materialized view when using rownum
Hi all,
I had an issue with rownum when using complete refresh
I am using rownum when creating materialized view and it is generation correctly.But the issue was when i am refreshing the same ,rownum was not getting sorted in ascending order.
anyone had come across this scenario
rownum is determined as the row is output, so "order by rownum" does literally nothing.
http://docs.oracle.com/cd/B19306_01/server.102/b14200/pseudocolumns009.htm
Similar Messages
-
Issue with creation of a materialized view
Hi,
I have a SQL query that works fine.
But when I create a materialized view using the query, a few columns in the MV do not get populated at all.
What could be the issue here?
regards
PremHi,
Thanks for the reply. Here is the code.
CREATE MATERIALIZED VIEW EDW.MV_OPPTY_ACTIVITY_AGG
TABLESPACE EDW_DIM_DAT
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
REFRESH COMPLETE ON DEMAND
WITH PRIMARY KEY
AS
select
OPPTY_ID OPPTY_ID,
OPPORTUNITY_KEY OPPORTUNITY_KEY,
oppty_number oppty_number ,
SALES_CONSULTANT_HIST_KEY SALES_CONSULTANT_HIST_KEY ,
company_add_source_key company_add_source_key,
SALES_CONSULTANT_ID SALES_CONSULTANT_ID,
ACTIVITY_TYPE ACTIVITY_TYPE ,
activity_DATE activity_DATE ,
LAST_MODIFIED_DATE LAST_MODIFIED_DATE ,
CUSTOMER_FLAG CUSTOMER_FLAG,
SALES_EMPLOYEE_HIST_KEY,
milestone_KEY,
oppty_milestone_name_hist stage_name,
oppty_milestone_id_hist stage_id,
milestone_prob prob_to_close,
start_date oppty_start_date,
oppty_close_date oppty_close_date,
end_date oppty_end_date,
sum(DURATION) TOTAL_DURATION,
sum (CASE WHEN ACTIVITY_type IN ('CU14', 'CU15', 'CU16', 'CU17',
'CU18', 'CU19', 'CU20', 'CU21') THEN DURATION ELSE 0 END ) CQM_DURATION,
sum (CASE WHEN ACTIVITY_type = 'CU01' THEN DURATION ELSE 0 END ) TRADE_SEM_DURATION,
sum( CASE WHEN ACTIVITY_type = 'CU02' THEN DURATION ELSE 0 END ) RFP_RFI_DURATION,
sum( CASE WHEN ACTIVITY_type = 'CU03' THEN DURATION ELSE 0 END ) INFO_GATH_DURATION,
sum( CASE WHEN ACTIVITY_type = 'CU04' THEN DURATION ELSE 0 END ) PREP_DURATION,
sum( CASE WHEN ACTIVITY_type = 'CU05' THEN DURATION ELSE 0 END ) PRES_DEMO_DURATION,
sum( CASE WHEN ACTIVITY_type = 'CU06' THEN DURATION ELSE 0 END ) POC_DURATION,
sum ( CASE WHEN ACTIVITY_type = 'CU07' THEN DURATION ELSE 0 END ) PRE_CUST_SUPP_DURATION,
sum( CASE WHEN ACTIVITY_type = 'CU08' THEN DURATION ELSE 0 END ) POST_CUST_SUPP_DURATION,
sum( CASE WHEN ACTIVITY_type = 'CU09' THEN DURATION ELSE 0 END ) PARTNER_SUPP_DURATION,
sum( CASE WHEN ACTIVITY_type = 'CU10' THEN DURATION ELSE 0 END ) TRAVEL_DURATION,
sum( CASE WHEN ACTIVITY_type = 'CU11' THEN DURATION ELSE 0 END ) KEYCODES_DURATION,
sum( CASE WHEN ACTIVITY_type = 'CU12' THEN DURATION ELSE 0 END ) SI_SUPP_DURATION,
sum ( CASE WHEN ACTIVITY_type = 'CU13' THEN DURATION ELSE 0 END ) CHANNEL_SUPP_DURATION,
sum( CASE WHEN ACTIVITY_type = 'CU23' THEN DURATION ELSE 0 END ) MIGRATION_DURATION ,
max(LICENSE_USD) LICENSE_USD ,
MAX(LICENSE_LOCAL) LICENSE_LOCAL,
MAX(maintAINANCE_usd) maintAINANCE_usd,
MAX(maintAINANCE_LOCAL) maintAINANCE_LOCAL,
MAX(TRAINING_USD) training_usd,
MAX(TRAINING_LOCAL) training_LOCAL,
MAX(CONSULTING_USD) consulting_usd,
MAX(CONSULTING_LOCAL) consulting_LOCAL,
MAX(RENEWALS_USD) renewals_usd ,
MAX(RENEWAL_local) RENEWAL_local,
max(LOBANALYTICS2_LOCAL) epm_local,
max(LOBDATAINTEGRATION2_LOCAL) eim_local,
max(IDD_AMOUNT_LOCAL) idd_local,
max(ONDEMAND_AMOUNT_LOCAL) ondemand_local,
max(LOBANALYTICS2_usd) epm_usd,
max(LOBDATAINTEGRATION2_usd) eim_usd,
max(IDD_AMOUNT_usd) idd_usd,
max(ONDEMAND_AMOUNT_usd) ondemand_usd
FROM edw.sales_consulting_activity_fct t1 ,
select
o.oppty_id_number,
o.oppty_id,
O.OPPORTUNITY_KEY,
LICENSE_USD LICENSE_USD ,
LICENSE_LOCAL LICENSE_LOCAL,
o.FYM_USD maintAINANCE_usd,
o.FYM_LOCAL maintAINANCE_LOCAL,
o.TRAINING_USD training_usd,
o.TRAINING_LOCAL training_LOCAL,
o.CONSULTING_USD consulting_usd,
o.CONSULTING_LOCAL consulting_LOCAL,
o.RENEWAL_USD renewals_usd ,
o.RENEWAL_local RENEWAL_local ,
o.LOBANALYTICS2_LOCAL,
o.LOBANALYTICS2_usd,
o.LOBDATAINTEGRATION2_LOCAL,
o.IDD_AMOUNT_LOCAL,
o.ONDEMAND_AMOUNT_LOCAL,
o.LOBDATAINTEGRATION2_usd,
o.IDD_AMOUNT_usd,
o.ONDEMAND_AMOUNT_usd
from edw.opportunity_hist_fact o
where o.SOURCE_SYSTEM='SFDC'
and upper(status)='ACTIVE'
and o.last_modified_date = (select max(last_modified_date )from edw.opportunity_hist_fact o2 where o.opportunity_key = o2.opportunity_key))T2,
( Select activity_key,OPPTY_ID_NUMBER, MIL.milestone_KEY,MIL.milestone_name oppty_milestone_name_hist,milestone_id
oppty_milestone_id_hist, milestone_prob,start_date,oppty_close_date,end_date FROM
EDW.opportunity_hist_fact OPP,
edw.milestone MIL,
edw.sales_consulting_activity_fct act WHERE
ACTIVITY_DATE >=start_date (+) and activity_date <=opp.last_modified_date(+)
and OPP.OPPTY_ID_NUMBER (+) =act.OPPTY_NUMBER
and OPP.milestone_key =MIL.milestone_key(+) ) T3
where t1.oppty_NUMBER (+) =T2.OPPTY_ID_NUMBER
and t1.activity_key=t3.activity_key
--and oppty_number ='279749'
GROUP BY OPPTY_ID,
oppty_number,
OPPORTUNITY_KEY,
SALES_CONSULTANT_HIST_KEY ,
company_add_source_key,
SALES_CONSULTANT_ID,
SALES_EMPLOYEE_HIST_KEY,
ACTIVITY_TYPE ,
ACTIVITY_DATE ,
LAST_MODIFIED_DATE,
CUSTOMER_FLAG,
milestone_KEY,
oppty_milestone_name_hist,
oppty_milestone_id_hist,
milestone_prob,
start_date,
oppty_close_date,
end_date;
Regards,
Prem -
Update sequence wrong in Materialized view when using refresh group
Hi,
I made a trigger (for each row) on a materialized view(replication data from a master table in in a different database), which is refreshed by a refresh group (exec dbms_refresh.refresh('"...). However, the update order/sequence is important and must be handled (by the trigger) in the same order how the updates where done in the master table. Unfortunately the updates in the materialized view are NOT in the same order. The trigger is fired in a wrong order.
I am using database version 10.2.0
Does anybody reconize this problem, Is there a solution for this problem ( with keeping the refresh group mechanisme)?
Thanks
Regards
Jurnrownum is determined as the row is output, so "order by rownum" does literally nothing.
http://docs.oracle.com/cd/B19306_01/server.102/b14200/pseudocolumns009.htm -
Graphic Styles - issue with creates style expanding to background when used
I have created a background style to use as a wire frame, and having created it, every time I use it the frame expands to the back ground size?
Thank you Peter and Amebr for your assistance. I ended up using RH Multilevel List Style, configured, and created an identical List Style in Word. I created a Single and a Multilevel (e.g., Level = bullet, Level 2 = squares); their challenge is matching RH indents with Word Indents... It's sort of a bear since RH does not have the Format Paragraph option (ref. drop-down) like Word Lists - Numbering functionality.
After generating my print document mu Bullet style reads "Normal (Web)"; even though the RH CSS Wizard recognized Word List Style I created (Ref. Font: Symbol, Font color: Black, Indent: Left: 0.15", Hanging: 0.25", Outline numbered + Level: 1 +, Numbering Style: Bullet + Aligned at: 0.15" + Indent at: 0.4", Priority: 100, Based on: No List.
Question: Would anyone out there know why is when I highlight my bullet list to verify the correct Style (with the Styles pane open) and I see the "Normal (Web)" [its Style type = Paragraph and Style based on = Normal) is selected? If it came through (from Rh) as a true Multilevel List Style, I should not see anything.
Happy Holidays!
~PM -
Fast refresh of materialized view
Hi All,
This is my first posting on this forum, so I hope I don't step on anyone's toes as I wade into a problem that I am experiencing.
I have a number of either join-only or single table aggregate materialized views that I have experienced problems with. All the views are setup for FAST REFRESH ON DEMAND but I'm hitting an error if I execute a COMPLETE refresh of the view when I've done an ALTER SESSION ENABLE PARALLEL DML. The error I get is:
ERROR at line 1:
ORA-30439: refresh of 'DTKTGT.CTNS_PER_HR_VOL_AGG_MV' failed because of ORA-32320: REFRESH FAST of "DTKTGT"."CTNS_PER_HR_VOL_AGG_MV" unsupported after cointainer table PMOPs
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 814
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 872
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 852
ORA-06512: at "DTKTGT.MV_REFRESH", line 21
ORA-06512: at line 2
Any help anyone could provide would be greatly appreciated as every now and then, a COMPLETE refresh is unavoidable and using the ENABLE PARALLEL DML makes the refresh run a lot faster than without the ALTER SESSION.
GaryThis forum only is for questions relating to the use of OLAP Option. I would post your question on the database forum.
Keith Laker
Oracle Data Warehouse Product Management
OLAP Blog: http://oracleOLAP.blogspot.com/
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
DM Blog: http://oracledmt.blogspot.com/
OWB Blog : http://blogs.oracle.com/warehousebuilder/
OWB Wiki : http://wiki.oracle.com/page/Oracle+Warehouse+Builder
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html -
Hi there,
i've got a question to the refreshment of materialized views: when updating or inserting / deleting data of some specific tables, my materialized view should be updated.
First of all, i though to make that happen by using triggers on the specific table and the DBMS_MVIEW.REFRESH() mechanism. But as i have read pretty often, it isn't recommended doing that with triggers.
But how can I get what I want :-)
Thank a lot for your answers,
Martin
Edited by: 949697 on Mar 4, 2013 1:11 AMThanks for your answers,
the case with FAST REFRESH doesn't work. Our materialized are very complex and are using e.g subselect-statments, analytic functions,UNION, Order, Group by.... According to the documentation, we can't use the FAST REFRESH.
Using the REFRESH ON COMMIT could be possible. Having a look at the documentation, there is one interesting sentence: A REFRESH ON COMMIT materialized view is refreshed automatically when a transaction that does DML to one of the materialized view's detail tables commits
What are the materialized view's detail tables? Are that all tables in the FROM-Part of the query?
Martin -
Fast refresh on MATERIALIZED VIEW
Oracle 10 g R2 (10.2.0.5)
CREATE MATERIALIZED VIEW scott.mv_test
TABLESPACE users
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
REFRESH FORCE ON DEMAND
WITH PRIMARY KEY
AS
Select ....
I have this MV, when I do the FAST refersh as follows , I am getting error
SQL> execute DBMS_MVIEW.REFRESH( 'MV_TEST','f');
BEGIN DBMS_MVIEW.REFRESH( 'MV_TEST','f'); END;
ERROR at line 1:
ORA-12004: REFRESH FAST cannot be used for materialized view "SCOTT"."MV_TEST"
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2251
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2457
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2426
ORA-06512: at line 1
But it's working with Complete refresh.
Is that expecte, any help would be appreciated.
Thanks,ORA-12004: REFRESH FAST cannot be used for materialized view "string"."string"
Cause: The materialized view log does not exist or cannot be used. PCT refresh is also not enabled on the materialized view
Action: Use just REFRESH, which will reinstantiate the entire table. If a materialized view log exists and the form of the materialized view allows the use of a materialized view log or PCT refresh is possible after a given set of changes, REFRESH FAST will be available starting the next time the materialized view is refreshed.http://ora-12004.ora-code.com/ -
Fast Refresh Nested Materialized View problem in ORACLE 9i 9.2.0.7
Hello
My problem is in creating fast refresh nested materialized view in oracle 9i
In below is an example of my problem
( I need to say when I run this example in Oracle 11g all things is OK )
create table ali.alitest1(id number primary key,n1 number,n2 number);
create table ali.alitest2(id number primary key,n3 number);
CREATE MATERIALIZED VIEW LOG ON ali.alitest1 WITH ROWID,PRIMARY KEY ,SEQUENCE
(n1,n2)
INCLUDING NEW VALUES;
CREATE MATERIALIZED VIEW LOG ON ali.alitest2 WITH ROWID,PRIMARY KEY ,SEQUENCE
(n3)
INCLUDING NEW VALUES;
CREATE MATERIALIZED VIEW ali.alitest1_mv
REFRESH WITH PRIMARY KEY FAST
AS
select id,n1 from ali.alitest1;
CREATE MATERIALIZED VIEW LOG ON ali.alitest1_mv WITH ROWID,PRIMARY KEY ,SEQUENCE
(n1)
INCLUDING NEW VALUES;
CREATE MATERIALIZED VIEW ali.alitest2_mv
REFRESH WITH PRIMARY KEY FAST
AS
select t1.id,t1.n1,t2.n3,t1.rowid "t1_rowid",t2.rowid "t2_rowid" from ali.alitest1_mv t1,ali.alitest2 t2 where t1.id=t2.id;
SQL Error: ORA-12053: this is not a valid nested materialized view
12053. 00000 - "this is not a valid nested materialized view"
*Cause: The list of objects in the FROM clause of the definition of this
materialized view had some dependencies upon each other.
*Action: Refer to the documentation to see which types of nesting are valid.
do you know what is problem ?
thanksTake look for this link :
http://rwijk.blogspot.com/2009/08/fast-refreshable-materialized-view.html -
Problem with replication based on materialized view
Problem with replication based on materialized view...
Given:
1. Source: S-1
2. Targets: T-1, T-2
3. DB links: from T-1 to S-1, from T-2 to S-1
Required replicate table TBL on S-1 to T-1, T-2 via db links.
On S-1 was created materialized view log with PK on TBL. On T-1, T-2 were created mat.views as "on prebuilt table refresh fast on demand". In case of get "ORA-12034: materialized view log younger than last refresh" or initial load - perform complete refresh. Initial load on T-1 takes about 1 hour, on T-2 - about 12 hours. Refresh is executed via job with minutely interval. If refresh is running then it is not performed.
Problem: after initial load on T-1 performs fast refresh, but on T-2 raised ORA-12034 and complete performs again.
What's wrong?34MCA2K2, Google lover?
I confess perhaps I gave a little info.
View log was created before MV.
It was the first initial load.
No refresh failed.
No DDL.
No purge log.
Not warehouse.
There is no such behavior for MVs on another sites.
P.S. I ask help someone who knows what's wrong or who faced with it or can me follow by usefull link.
P.P.S. It's a pity that there is no button "Useless answer" -
How can I manually refresh a Materialized View
Hi,
There's a materialized view created in 2006 as under:
CREATE MATERIALIZED VIEW "schema"."mv_name"
USING INDEX
REFRESH FAST ON DEMAND
WITH PRIMARY KEY USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE AS SELECT * FROM "table_name@dblink;
The problem is that the last refresh was done in Aug. I want to manually refresh this materialized view right now as there is a procedure based on this MV and its not showing the right data as the above materialized view has not been refreshed, so the data for this month is not showing.
Please let me know how I can refresh that MV right now.
Also do I need to change the refresh option. How can I change it so that the MV refreshes itself every second.
ThanksAlso do I need to change the refresh option. How can
I change it so that the MV refreshes itself every
second. Every second? Why do you want to do that?? Perhaps waht you really want is refresh the MV on commit. -
Materialized view (fast refresh mode) + Materialized view log on another DB
Hi all,
I created a materizalied view using this script :
CREATE MATERIALIZED VIEW GIPS.DOSSIER_MEDICAL_MV2
TABLESPACE GIPS_T
NOCACHE
NOLOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
USING INDEX
TABLESPACE GIPS_I
+ REFRESH FAST ON DEMAND +
START WITH TO_DATE('11-janv.-2011 16:00:00','dd-mon-yyyy hh24:mi:ss')
NEXT sysdate (1/96)+
AS
SELECT N0_SEQ_BLOB_PDF,
EXAM_ID,
MPR,
RSM,
rub,
date_deb,
SPE,
commentaire,
SPR,
MEP,
MSJ,
TTD,
exam_type
FROM DOSSIER_MEDICAL@dbdoc_lk
WHERE DOSSIER_MEDICAL.EXAM_TYPE IN ('TELEM', 'SCANNER', 'EPPO_SECMED');
So you can see I'm using a dblink in the select statement ( DBDOC_LK )
On the DB referenced by this dblink, I created a materialized view log using this script :
CREATE MATERIALIZED VIEW LOG ON "DOSMED"."DOSSIER_MEDICAL"
TABLESPACE "DOC_T"
WITH PRIMARY KEY
INCLUDING NEW VALUES;
The problem is that my materialized view has never refreshed since its creation ! and I don't understand why ?
Can someone help me ?
Thank you.The REFRESH schedule causes a job to be created for the execution of the Refresh. You should see this job in DBA_JOBS / USER_JOBS.
The job would run only if the instance parameter JOB_QUEUE_PROCESSES is set to 1 or higher (the default is 0). This parameter can be modified dynamically with an ALTER SYSTEM command.
Hemant K Chitale
http://hemantoracledba.blogspot.com -
Problem with property refresh in code view
I am suddenly noticing a problem in CS3 (v 9.0 build 3481),
OSX 10.4.11. In Code view (NOT Split view), any change to the code
causes the property inspector to display the message "You have made
changes to the code. To edit selection properties click refresh or
press F5".
It is my understanding that this feature is intended to
refresh the Design view when working in Split mode. I have not used
DW much in the last few weeks, but I never recall having this come
up before, and I work in code view quite a bit. Also, possibly
related, the tag selector strip at the bottom goes blank at the
same time the message appears in the property inspector.
This will be a significant impediment if it continues. Am I
crazy and it's always been this way, or is there a bug or setting
that I've inadvertently changed? I understand why refreshing is
necessary in Split view but I cannot see what purpose this could
possibly serve in Code view.
Tedquote:
Originally posted by:
Tedly61Am I crazy and it's always been this way, or is
there a bug or setting that I've inadvertently changed? I
understand why refreshing is necessary in Split view but I cannot
see what purpose this could possibly serve in Code view.
This is how it's always been for me with both DW 8 and DW CS3
for Windows. Can't say with regard to the Mac versions. -
I am having issues with my computer recognizing my phone when attached. I am trying to transfer pictures to my computer but it doesn't even see the phone.
skinaked101,
Look no further help is here! I can understand the importance of being able to keep your pictures safe on your computer.
Have you tried using different USB ports on your computer, as your fellow community member suggested?
Visit http://www.verizonwireless.com/support/knowledge-base-97259/ for complete steps to transfer the pictures from your phone to computer.
JohnB_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Refresh the main view when the pop up was closed
Hi,all
how can I refresh the main view when the pop up window was
closed to see the updated data? In pop up window I update
single row in the table based in main view.
Regards,
MichaelMichael,
There are 2 type of pop-ups in WD, and the answer is different depending on which type you are using:
1. Stand-alone browser window that hosts separate application (result of IWDWindowManager.createNonModalExternalWindow) -- no way.
2. Inner pop-up created via IWDWindowManager.createModalWindow -- absolutely possible:
-- a. Create event in component controller (probably with parameters)
-- b. Create method in component controller that fires this event (with corresponding parameters, if any)
-- c. In view that corresponds to window invoke method created in [ b ] and hence fire event. This should be done in action handler of something like "OK" Button or "Close" LinkToAction.
-- d. In any other controller subscribe to event described in [ a ]
Valery Silaev
SaM Solutions
http://www.sam-solutions.net -
My partner has the Iphone 5 and I am using a MacBook with version 1.0.2. When using the face time app to call him he says that cam freezes and he is unable to hear me. Any ideas of the problem and and ideas for resolving the issue?
Had the same problem, the only fault and the reason why it happend is a bad wifi connection!
Could ofc be something else, but thats my two cents!
Maybe you are looking for
-
Saving session state during pagination
See http://htmldb.oracle.com/pls/otn/f?p=24317:152 I hacked into the PPR function to save the checkbox value into session state during pagination. Is there a way to do something similar for checkboxes in the report itself rendered using htmldb_item.c
-
When to use binary search ... little urgent.
Hi evryone, Plz let me know under what kind of conditions can we use binary search addition cause if I use it for every read statement the database acees in se30 goes higher than normal. If i randomly select only a few big read table statements the d
-
Storage in iPad 2 not updated when deleting videos
I have deleted 8GB of iTunes purchased videos from my iPad 2 however this does not appear to free up any space - usage > storage still shows only 1.3GB of free space whilst when I try to download a new video I receive a message that I do not have eno
-
Multi page recordset output from ASP page on Spry Tabbed Panel Widget
I am using a simple Spry Tabbed panel set on my asp page to show the output from different ASP pages, inside the tabbed panels. The tabbed panels on the page under consideration (destination page) display the output from different asp pages (source p
-
How to remove leading zeros for an item number within quickviewer
how to remove leading zeros for an item number within quickviewer. Pls help