Issue with creating a BAM Alert in BAM console!!!

Hi ALL,
I am getting script error while creating a BAM Alert in BAM console.
Event trying to create : "when a data filed in a dataobject meets specified condition"
Error occuring: while click on "this data field has a condition of x"
popup window Error Description: "object doesn't support this property or Method"
Pleaase help me on same. Appreciate your hhelp and time in advance!!!
Thanks
--Kris

Hi Anuj,
I am facing the same problem.
I am using Windows 8, IE 10. I need to click F12, to change the Browser Mode to IE 7 to open BAM application. Everything works fine until I came to set Alter the exactly same location. I am getting the same error.
I installed IE tab for FireFox. Now I am able to open BAM applicaiton FireFox, but getting the same error at the same place.
Thank you very much for your help or any information,
Alena

Similar Messages

I am having a issue with getting data useage alerts for my iphone 4s

I am having a issue with getting data useage alerts for my iphone 4s from AT&T. I do not download anything huge at all.
I looked into it and figured out that the phone dials out nightly at 12:29am every night. I went into my settings and went to general..about..diagnostics and useage..then diagnostics and useage data to see this. I then clicked don't send...but I am still getting useage alerts. Can anyone help me please...
Thanks

Honestly, from reading the thread linked, they all come off as a bunch of whiney people that cannot be bothered to help themselves.
Little to nothing in that thread indicates an issue beyond inept consumers. Yes, I read several pages on the incessant gripes. Very few made any actual attempts to troubleshoot issues before whining about the "Apple issue" and those that did actual troubleshooting got their issues resolved.
So no, Apple has nothing to fix beyond a few specific devices that are experiencing hardware issues.
If you have actually put forth effort and done the basic troubleshooting, take the device to Apple for evaluation and possible replacement. Whining will get nothing accomplished.

.Issue with creating a photo book in Iphoto error message states some frames are missing images, but I've checked each one and from I can see they are all filled in. It won't let my buy the book though

Having an Issue with Creating a photo Book in Iphoto. I continue to get an error message when clicking on "Buy Book" The error indicates that I'm missing a frame or frames from the book. I've checked this many times and cannot locate the issue. The book appears to be complete from my perspective. What can I do now? I worked very hard on this and would hate to lose it all.

How did you check the book? Did you preview it?
See:
iPhoto, Aperture: Previewing an order in iPhoto or Aperture
Is that the message?
"your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book."
The most common reason for this error is, that you have used a page layout that needs a background photo and you have not yet added the backdrop. Then the book is still showing some default grayscale image.
Check, if one of your page layouts is using this background:
Then you need to add a photo to the background of the page.

Issue with Creating Forecast Profiles/Forecasting

Hello Experts,
We are facing an issue with creating forecast profiles.
We have two FYVs defined in our system, one with 52/53 fiscal weeks (Fiscal Variant W1) and the other with 12 fiscal months (FYV M1), Our storage buckets profile (STP) uses W1, since we have many dataviews that use W1 as the FYV in the attached Planning buckets profile(PBP). We also have dataviews that display in fiscal months (use FYV M1 in the attached PBP), data from Fiscal weeks will be aggregated and shown in Fiscal months . We need to do forecasting using FYV M1, that is forecast in Fiscal Months , but since the storage bucket profile has W1 which is used in the Planning Area config. We are unable to create any Forecast profiles with FYV M1 . Please note that we cannot use M1 in STP because when we used M1 in STP, we could not create dataviews in fiscal weeks (using W1)
1. Is there any way we can forecast using M1 while having assinged W1 to the Planning area/STP ?
2. OR we are willing to assing M1 to PA, provided we can use W1 in some of the dataviews, unfortunately we were unable to do this, though the vice versa is possible i,e. we could have W1 in STP and M1 in some of the related PBPs/ Weekly Dataviews.
Please let me know if any of these are possible or if there is any alternative way to do forecasting in Fisc Months.
Thanks
Tej

Hi,
You are correct, the Storage bucket profile always has to be at a detailed level. Time bucket profile can be at higher levels like monthly, quarterly etc.,
Coming to the root of your problem, which is you are unable to forecast at a level other that what is specified in your Storage bucket profile, unfortunately the answer is no.
You can do a forecast only at the level at which the data is stored and not at the level at which the data is viewed.
One work around for this is to create an additional planning area with the same MPOS and this addl PA can contain only those bare minimum KF required for your forecast. After you generate your forecast, you can copy it to your Weeks based PA and then proceed from there. This copy of KF between PA is much faster as it will happen at LC level and should not cause time delays.
NOTE - You have to exercise caution when you are using 2 periodicities i.e., weeks and months, if you are using standard SAP calendar then you are good to go. If you are creating custom Fiscal variants pls ensure the start and end of a month is same in both the weekly and monthly variants. Failing which, there will be mismatch of data between the two dataviews.
Hope this helps.
Thanks
Mani Suresh

Issue with creating List of Values in Business View Manager

Hi,
Could any one help me to figure out what this issue refers to?
When i created a List of Values in Business View Manager, it is throwing the following error!!!!
The List of Values used by this parameter cannot be based on a Business View derived from the current Data Foundation or Business Element.
Prior to creating LoV, i've done successfully with creating Data connection, Data foundation, Business element and Business View..
Thanks
Viswa

Hi Visaw,
Firstly,
-->Open Repository Explorer,
-->where you are have related DF,DC,BV,BEand LOV's
-->Right click on LOV's -->There you can find Schedule list of values.Then schedule list of values and check if it prompts for errors.
If you face the same problem, what is the error you are getting.
Else try to use the LOV's and proceed further.
-->Check whether the LOV's are pointing to the same Business View and check the Business view pointing to the same Datafoundation.
If you are facing the same problem then try with the below steps:
-->Try to Create a report at designer level Using then Business view
-->Create two new parameters and select the existing parameters(LOV parameter's)
-->Check whether it is working.
-->If you face the same problem ,Update the connection of Business view manager.
Go to Database tab-->Select Set DataSource location and update it with current Businessview Manager.
Try this ,and let us know.
Regards,
Navin

Project Online, Issue with creating projects from EPTs (with workflows)

Hello, I am using Project Online. I am not able to create a new project based on the "Software Development" EPT. I get following message: Sorry, something went wrong An unexpected error has occurred. TECHNICAL DETAILS Troubleshoot
issues with Microsoft SharePoint Foundation. Correlation ID: 29b2b89c-607f-1000-80c2-80bbbb7ff088 Date and Time: 15.09.2014 03:57:25.
Any ideas what went wrong?
Thanks in advance,
Martina

The reason for this behavior was the following:<o:p></o:p>
The currency of the PWA settings have been changed.<o:p></o:p>
Looking into the queue of the EPT we found the following hint:<o:p></o:p>
Project:<o:p></o:p>
ProjectCurrencyConflict (23001). Details: id='23001' name='ProjectCurrencyConflict' uid='f1850fb3-c53c-e411-9a1e-00155d58393b'.<o:p></o:p>
After changing back to settings "Allow projects to be published in various currencies" the workflow works fine.<o:p></o:p>
Nevertheless this issue is not clear for us why it appears after a currency change in the workflow. Maybe a sleeping bug?<o:p></o:p>

Issue with create user and issue with Java Development tab

I have two issues with EP,
1. When i login with Super Admin user, i am unable to Create any user from User Admin tab. Do i have to change the settings of the Super Admin? or is there any criteria for creating the user?
2. How to assign any user the Java Development tab. Though i login with a super admin user i am unable to see the Java Development role and when tried to assign the role, there were no searches for that Java....

Hi Adi,
by default the super administrater has got all permissions. Thus you should be able to create portal users when using a user assigned to the portal group Administrators.
In order to help you with your first question we need more information. Please describe the malfunction in detail. Have a look into the log files and post related error messages.
Regarding your second question: You will find the java development role in PCD
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Roles/com.sap.pct.pdk.JavaDeveloper.
If not, then you haven't installed the PDK business package in your portal.
Go to service.sap.com, choose downloads and search the package (PDK should do it). Download the package, and deploy on your portal using SDM.
Best regards,
Martin

Issue with SCSM to SCOM Alert Connector when AOI is Connected?

Hello Azure Operational Insights forum,
I'm trying to connect my Server Manager (SCSM) instance to my Operations Manager (SCOM) instance. However, I get this warning message when I create the connection:
"Found at least one other alert connector in Operations Manager. Alerts may not be routed as expected if multiple connectors subscribe to the same alert."
There "was" a connector previously, but I followed Kevin Holman's blog to remove it. Now everything looks okay (at least as far as I can tell).
At this point, I wonder if the System Center Advisor (now renamed Azure Operational Insights) connector is cause the warning message I listed above when setting up an Alert Connector in SCSM? It's the only "Alert Connector" in the list.
Has anyone else had this issue?

I have also found this warning message. In my case, this is a new connector to a new SCOM Mgt group. the management group in SCOM is connected to AOI.
Repo:
1. Install new OM
2. Configure AOI connection
3. Create SCSM OM Alert Connector
Warn appears after entering SCOM Server details and run as account and continues until Connector is created
The warning does not appear to affect the operation of the connector based on initial tests performed.

Issues with Creating Outlines in CS2

I'm having an issue when a create text outlines in InDesign. For some reason, and this only happens so far with 2 fonts, when I outline text (highlight text - click "object" - "create outlines") an extra character is added on to the end of certain words. As far as I can see it is only happening with words that end in "t" like August and Northwest and it adds a second "t". The two fonts I've had issues with are Bickham Script Pro and Asturias. The major problem with this is I have clients approve their proofs, then I outline the text in preparation for printing (which is when it adds the extra character), since I'm not doing additional proofreading after the client has approved, the file makes it through printing with the extra character. Has anyone else seen this? I've attached an example of what it looks like, the extra character is on the word "Northwest"

{I hate the way this forum works! I follow stuff by email, which gives no indication of post no. So, I had to click the link in your post to access the thread on the web. (...wait...) No post nos. Sign in (...wait...) go to prefs (...wait...) select Flat view and Save (...wait...) return to forum (...wait...) - and find that post 17 was the one I'd replied to, as the Threaded view properly indicated.}
My point was that the text had clearly not been converted to outlines. Outlines had been created from the text and added to the file, and that is what displays, but the text is still there - otherwise, why would the fonts be embedded? And why would that one piece of text peep out on the right-hand side?
Noel

Outlook 2007 , calendar issues with creating meetings - any ideas?

Hi All
My boss has a Mac and has installed office 2007. Configured Outlook to connect to our office exchange, all ok.
Now, to book meetings we use the resources field when added someone. This is not visble in the mac version of office.
Now, also a issues he has seen which I have witnessed, that if he creates a meeting via his Windows machine in outlook, as soon as he opens Outlook on his mac, all meetings become unbooked. They are still there, just all marked as provisional and hence what happens, he goes to the meeting, to only find the room booekd out to someone else as its only marked as provsional.
Any ideas, anyone else seen this?
Cheers
Scott

Since this is software issue with Outlook, and not one related to Macs or Mac OS, you should probably post your question on an Outlook forums:
http://www.office-outlook.com/outlook-forum/

Issue with creating a new line in Glossary widget

I'm using Captivate 6 and have an issue with trying to display text on a new line in the description field of the Glossary widget. In playback, a carriage return displays as \n
I read in another discussion (from early last year), that this issue had been resolved and that the fix would be shared soon on the captivate blog for non-subscription users. Does anyone know if the fix has been shared yet - I can't find it anywhere?
Thanks for any help you can provide.
Tenneil

Hi Tenneil,
Greetings from Adobe.
Please click on the below link and download the updated Glosarry Interaction.
https://files.acrobat.com/a/preview/0a17bb28-049e-4ac7-b8f7-dbdacef5e91c
Extract the zip file to your desktop.
Copy "08_Glossary.wdgt" from the extracted zip file.
Go to : C:\Program Files (x86)\Adobe\Adobe Captivate 6 (32 Bit)\Gallery\Interactions (For 32 bit Captivate) or C:\Program Files\Adobe\Adobe Captivate 6 (64 Bit)\Gallery\Interactions (For 64 bit Captivate).
Replace the glossary widget in the interaction folder. Restart Captivate 6. (Make sure that you take the backup of the original Glosarry Widget)
Apply the widget again and check for the issue.
Let me know if it works for you.
Regards,
Mayank

Issue with creating a text box from a loop

I was hoping someone could take a look at this code and maybe
help me find out why this isnt working. What I am trying to do is:
(NOTE: I have used a few differents scripts and combined them, so
the code may not be the greatest).
Pull Data from a PHP file (The PHP file gets it's data from
database)
Then run a loop that brings in First Name, Last Name, Jersey
Number, and Position
Then before it loops and gets the next player it creates an
array that creates 3 text boxes with Full Name, Jersey Number and
position
then it loops through the process again untill all of the
records have been retreived.
I'm not sure if its because I have a do while loop inside of
a for loop inside of a function and an Array. I'm new to Arrays and
loops. the issue is it wont display the text boxes.
NOTE: When I trace this, the data is being retrieved.
Thanks for the help

"this" inside your onLoad() method refers to your loadvars
instance, receive. and the loadvars class has no createTextField()
method, so you're not going to create any textfields if that code
is in the onLoad() body.
to remedy, reference a timeline instead of receive.

Issues with creating PDF's (Acrobat 8.1.6. and 9.1.3) in Windows Server 2003 (32 bit) and Windows XP (64bit)

We have a report package that generates customised reports
We generate the PDF's by simply "printing" to the Adobe PDF printer
In Windows XP Pro (32 Bit) the report creates the PDF perfectly
In Windows Server 2003 (32 Bit) or Windows Xp Pro (64 Bit) the PDF is created 90% perfect but some of text has slipped on the page.
Whilst we are looking into the report writer (Dev Express) I would like to rule out any Acrobat issues.
With thanks
Mark

I think it will work fine if you use the "Enterprise" authentication option. It may have dependencies on 32 bit components. So, that's why we must run IIS in 32 bit mode even though it's on a 64 bit OS. That means CR supports 64 bit OS systems only if you bring down other components that CR uses to 32 bit levels. I'm not sure if that is considered "full support".
We are trying to use the LDAP authentication option, but that tab is disabled. Other tabs such as Active Directory and WinNT are disabled as well. There maybe another component that we must bring down to 32 bit processing.
Is there a way to enable the LDAP authentication configuration tab?
thanks

Issues with creating EXE in LV 9 (w/ patch)

When creating an executable in LV 9 (with the new patch installed), it is taking around 7 to 8 minutes to create the executable... where as in LV 8.5 it only took around 1 minute (same VI no changes).
After the EXE is done I go into my build folder and find the following folders: NI_HTML, NI_report, NI_Standard Report (these all containing actual VIs (not executables) from the above folder llbs. This never occurred in 8.5 nor in 7...what's going on here? I've got a few customers waiting on the EXE and am just stalled due to this.

This is a joke right? "cleaner method of distribution"?
So I have to do more work to upgrade NI's lower level LLBs in LV 9 when in the 1st place I paid NI to upgrade from 8.5 to 9... doesn't seem close to an upgrade (in regards to plug & play quality) to me! The resource page that supposedly shows you how to fix this issue is vague! ??????? Geesh.
Maybe this is a better way to do things with the "Object Oriented Program" & Classes... though, for a someone only a few years deep in LV...this is not efficient at all (NI is going to start killing it's marketable value if they make this any more difficult).
"Solution:
The Report Generation Toolkit 1.1.3
released with LabVIEW 8.6 was rewritten using LabVIEW classes and
LabVIEW Object Oriented Program. Because of these changes and the
improvements in performance, there are some files that currently are
added explicity to the build directory. Therefore, the behavior is
expected and the executable will run without problems. In a pursuit of
a cleaner method of distribution when configuring the Build
Specifications for executable, all the generated folders can be placed
into one support directory."

Quality Issues with Drop Zones - Newbie ALERT!

Hello!
First post for me here...
Just started working with Final Cut Studio 5.1 and I have some issues that I have been running into. In DVD Studio, I am grabbing a menu template (Panes Blue) and I am creating a simple text animation in Motion (720x480) NTSC and saving the Motion file then importing the Motion file into DVD studio and setting up the drop zone asset to my motion file. When I preview, the text quality is very poor! At first I thought it was just the preview, but it still looks horrible on the TV when I burn.
How do I get the best quality when creating an animation in Motion that I would like to use in a DVD studio Drop Zone?
Please let me know if you need further info!
Jason

here's the issue:
DVDSP doesn't encode progressive scan. it doesn't matter what your encode settings are. I've done extensive testing on this issue. here's what happens:
I made an element that fits perfectly into a specified drop zone. the menu Background image or movie is rendered progressive scan (not interlaced). I drop the element into the drop zone and hit Simulate. Since the Drop zone and it's element need to be encoded to Mpeg2 in order to play properly, DVDSP interlaces it to make it work. Result: bad image compression and the drop zone area is badly interlaced while the rest of the image isn't.
This was something that frustrated me for weeks while i was trying to find a solution. As far as I know there is only one solution; Since DVDSP uses Compressor to encode files on build, there must be a way of intercepting the process and changing the settings that DVDSP uses to encode it's files. There is no preference for this and since the encoding takes place in the background, there is no way of changing this without getting a programmer to figure out how to do it, and even then, i don't know if it's possible. If someone can figure out how do do this, there'll be a lot of Happy people wanting it.

Issue with creating a BAM Alert in BAM console!!!

Similar Messages

Maybe you are looking for