Issue with creating List of Values in Business View Manager

Hi,
Could any one help me to figure out what this issue refers to?
When i created a List of Values in Business View Manager, it is throwing the following error!!!!
The List of Values used by this parameter cannot be based on a Business View derived from the current Data Foundation or Business Element.
Prior to creating LoV, i've done successfully with creating Data connection, Data foundation, Business element and Business View..
Thanks
Viswa

Hi Visaw,
Firstly,
-->Open Repository Explorer,
-->where you are have related DF,DC,BV,BEand LOV's
-->Right click on LOV's -->There you can find Schedule list of values.Then schedule list of values and check if it prompts for errors.
If you face the same problem, what is the error you are getting.
Else try to use the LOV's and proceed further.
-->Check whether the LOV's are pointing to the same Business View and check the Business view pointing to the same Datafoundation.
If you are facing the same problem then try with the below steps:
-->Try to Create a report at designer level Using then Business view
-->Create two new parameters and select the existing parameters(LOV parameter's)
-->Check whether it is working.
-->If you face the same problem ,Update the connection of Business view manager.
Go to Database tab-->Select Set DataSource location and update it with current Businessview Manager.
Try this ,and let us know.
Regards,
Navin

Similar Messages

Creating Dynamic Cascading Prompts Without Business View manager?

How can we create dynamic cascading prompts without Business View Manager??

Creae a parameter in Crystal Report Designer. I suggest you read the help on how to also.

SAP BW MDX Query - Business view manager

Hi,
i want to create a list of values in business view manager based on a BEx Query.
But after creating a connection to the BW System, i am not able to get any query shown (no items found).
Configuration:
SAP BW 7.31 SP5
BO 4.0 SP7
Any ideas? maybe a specific bw transport?
Regards,
Zaki

If, after making sure that you have the correct transports installed, you still can't get this to show up in BVM, you could try this:
1. Create a report that contains just the data that you want to show in the prompt.
2. Create a dynamic prompt in the report to show the data that you want to use.
3. Publish the report to your Favorites folder in BO, making sure to turn on the option to save repository objects.
This will automatically create the LOV and its supporting objects in BVM. You should then be able to edit them as necessary to set up the automatic login for the connection and anything else you need to do.
-Dell

Command Table - Business View Manager

Greetings,
I'm trying to create a command table, in Business View Manager, that is a view of the FACTS table.
Command Table:
Time_ID
Measure_ID
Valuetype_ID
Amount
I want to sum all duplicate fields by amount, so I try to create a command table with the following code:
select dbo.facts.Time_ID, dbo.facts.measure_ID, dbo.facts.valuetype_ID, sum(dbo.facts.sum)
From dbo.facts
group by facts.Time_ID
and I get the error "SQL syntax error returned. Please modify ant try again"
But, if I isolate de expression without the field sum(...) or only with the sum field it returns the result.
Can anyone help me?
Thanks.

Solved,
I have to put all fields except the amount field in the group by expression =)
Thanks

Perfomance issue with SharePoint List.

Current System:
Our application (for submitting and publishing articles) is using WSS 3.0
to store content and host workflows.
Article content like PDFs, Images & Videos are stored in a SharePoint document library.
There is also a list in which we have configured a custom state machine workflow. While creating an list SP item from the UI, instance of the configured workflow instance will be triggered and start monitoring.
Each article belongs to a Journal. We have TBs of data stored in content databases. Initially there was only one site collection (“http://<myweb:8080>/ArtcleLibrary”) and entire article data was storing it the same document library.
Later we decided to split the document library based on journal.
To achieve better scalability, we have now changed the application architecture by creating site collection for each journal and keep article content (there are many articles in a journal) in corresponding site collections. We have added more content databases
and sites collections are equally distributed among these Dbs.
Now it is like (“http://<myweb:8080>/<journalID>/ ArtcleLibrary”)
Actual Problem:
We have achieved scalability in the case of content management by splitting document libraries among different site collections and content databases.
But still the SP list for managing workflow is in the initial site collection (“http://<myweb>:8080/WorkflowTasks”). This single list contains now 60,000 items (=60,000 workflow instances) even if we deleted completed list items older than 3 months.
We have performance issues with the current workflow list. It is taking time (avg 20s) to create/read list item from the SP List. Sometimes items are not getting created in the list item.
From MSDN I came to know than there are recommended count for items in SPList (2000
or 5000 items).
What is the best solution to solve the above performance issue with SharePoint list?
Whether the above mentioned our approach to document library will work for SP list also (means split current SP List and keep in each Journal site collection)?
Please advise.

Hi Andrew,
Thanks for your post.
I still have some doubts.
If we go like this, will OWSTIMER be able to handle workflows (custom workflow is attached to SP List) of these many site collections. We have now more than 600 site collections.

How to use bind variale to create list of values? show date range?

Hi,
Dose anybode have a way to get around "bind variables are not allowed in Select statement" when create list of values from select? I have to create this based on who the user (one parameter passed into report) is.
Another Question:
I like to current date and current date-30 days on my report, how to achieve this?
Any help wil be greately appreciated.
Thanks

Hi LC...
Your approach is good...
but i said to change the column formula not in criteria...
but i wanted to done this change in fx of Dashboard prompt (presentation variable) column...
Of course i appreciate your approach... it was simple ...
Thanks & Regards
Kishore Guggilla
KUSHALINC

.Issue with creating a photo book in Iphoto error message states some frames are missing images, but I've checked each one and from I can see they are all filled in. It won't let my buy the book though

Having an Issue with Creating a photo Book in Iphoto. I continue to get an error message when clicking on "Buy Book" The error indicates that I'm missing a frame or frames from the book. I've checked this many times and cannot locate the issue. The book appears to be complete from my perspective. What can I do now? I worked very hard on this and would hate to lose it all.

How did you check the book? Did you preview it?
See:
iPhoto, Aperture: Previewing an order in iPhoto or Aperture
Is that the message?
"your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book."
The most common reason for this error is, that you have used a page layout that needs a background photo and you have not yet added the backdrop. Then the book is still showing some default grayscale image.
Check, if one of your page layouts is using this background:
Then you need to add a photo to the background of the page.

Set a default value for a radio button populated with a List of value

Hi,
I am using jdeveloper 11.1.1.3.0. I need to set a default value for a radio button populated with a List of value(Yes/No). Here's the selectonechoice code.
<af:selectOneRadio value="#{bindings.Code.inputValue}"
label="#{bindings.Code.label}"
required="#{bindings.Code.hints.mandatory}"
shortDesc="#{bindings.Code.hints.tooltip}"
id="sor1" autoSubmit="true"
valuePassThru="true" layout="horizontal">
<f:selectItems value="#{bindings.Code.items}" id="si1"/>
</af:selectOneRadio>
I want to have the selectonechoice set to No by default. In the previous versions, I set the default value in the base attribute VO. But it is not working in the new version.
Thanks

Hi,
this should work in JDeveloper 11.1.1.3 the same as in 11.1.1.2. If it doesn't then it is better to file a bug than to work around it
Frank

Issue with Creating Forecast Profiles/Forecasting

Hello Experts,
We are facing an issue with creating forecast profiles.
We have two FYVs defined in our system, one with 52/53 fiscal weeks (Fiscal Variant W1) and the other with 12 fiscal months (FYV M1), Our storage buckets profile (STP) uses W1, since we have many dataviews that use W1 as the FYV in the attached Planning buckets profile(PBP). We also have dataviews that display in fiscal months (use FYV M1 in the attached PBP), data from Fiscal weeks will be aggregated and shown in Fiscal months . We need to do forecasting using FYV M1, that is forecast in Fiscal Months , but since the storage bucket profile has W1 which is used in the Planning Area config. We are unable to create any Forecast profiles with FYV M1 . Please note that we cannot use M1 in STP because when we used M1 in STP, we could not create dataviews in fiscal weeks (using W1)
1. Is there any way we can forecast using M1 while having assinged W1 to the Planning area/STP ?
2. OR we are willing to assing M1 to PA, provided we can use W1 in some of the dataviews, unfortunately we were unable to do this, though the vice versa is possible i,e. we could have W1 in STP and M1 in some of the related PBPs/ Weekly Dataviews.
Please let me know if any of these are possible or if there is any alternative way to do forecasting in Fisc Months.
Thanks
Tej

Hi,
You are correct, the Storage bucket profile always has to be at a detailed level. Time bucket profile can be at higher levels like monthly, quarterly etc.,
Coming to the root of your problem, which is you are unable to forecast at a level other that what is specified in your Storage bucket profile, unfortunately the answer is no.
You can do a forecast only at the level at which the data is stored and not at the level at which the data is viewed.
One work around for this is to create an additional planning area with the same MPOS and this addl PA can contain only those bare minimum KF required for your forecast. After you generate your forecast, you can copy it to your Weeks based PA and then proceed from there. This copy of KF between PA is much faster as it will happen at LC level and should not cause time delays.
NOTE - You have to exercise caution when you are using 2 periodicities i.e., weeks and months, if you are using standard SAP calendar then you are good to go. If you are creating custom Fiscal variants pls ensure the start and end of a month is same in both the weekly and monthly variants. Failing which, there will be mismatch of data between the two dataviews.
Hope this helps.
Thanks
Mani Suresh

Issue with printing of Currency Value.

Hi,
I have an issue with printing of Currency Value.
( Pleae let me know if any thread available already I searched it before posting but not found).
The Problem is as follows:
I have a field s_value TYPE MARM-SALK3. (which is of currency type).
The value of field is actually 1664.1450. Currency USD
But when I print this variable in ALV report it prints as 166414.50 though I used the same data type. (SALK3).
Pleaes help me to fix this.
Regards,
Venkat

Hi,
If you use ALV to display currency value, you must sure that currency amount links with currency unit. You can archive this by using ALV fieldcat:
wa_fieldcat-fieldname = 'SALK3'.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-cfieldname = 'WAERS'.
wa_fieldcat-ctabname = 'ITAB'.
append wa_fieldcat to gt_fieldcat.
Please check,
Regards,

Error creating LOV in Business View Manager - cannot be based on current DF

Hi,
I'm trying to use Business View Manager for the first time. I'm trying to create a dynamic, cascading prompt to be used by Crystal Reports.
I've been able to create:
- data connection
- data foundation - simple one table
- business elements - two columns from the table
- business view
- List of Values
I am now trying to create a parameter in the Business Elements tool. The parameter needs to be a Dynamic, Cascading parameter.
When I try to save the new parameter, I get the follow error:
The List of Values used by this parameter cannot be based on a Business View derived from the current Data Foundation or Business Element.
HELP
Thanks

Hi Chris
If you are trying to create a LOV and use that as a parameter, then you need to create LOV as Dynamic Cascading values. Once created then you can use that LOV in the Crystal Reports.
This is the best way to get dynamic cascading prompts in Crystal reports.
Please refer to Business View Admin guide for more information.
Hope this helps!!
Regards
Sourashree

How to create dynamic connection in business view manager.

Hi Sir,
Can u explain how to create dynamic connection in business view manager.
Thanks
Vishali Raghava Raju

HI Vaishali,
Can you please elaborate your requirement ?
-Regards
B

Having issues with hard drive, trying to start up football manager 2015 but it reads for a few seconds then ejects itself , ive tried other cds and it reads fine so tried older versions of football manager which ive used before and they dont either

im having issues with hard drive im trying to install football manager 2015 it reads disk for a few seconds then ejects itself other cds read fine
and have tried older versions of football manager and they dont read either
any help would be greatly appreciated
thanks

Try resetting the SMC 2-3 times, if that does not work then the DVD may need cleaning. Get a dry cleaning kit from your local office supply store.
Intel iMac SMC and PRAM resets

LOVs in Business View Manager

Hi All,
I know the implementation of dynamic cascading parameters using list of values in Crystal XI.
But i need some information regarding Business View Manager.
Country > Region > City - This is my desired cascading parameter. For creating this parameter, what should be my data foundation?
Select country,region,city from customer
Can i use this query in my data foundation? I think this will duplicate the values inside country and region...
Please help me in this issue....
Thanks,
Meena

If you're interested in getting the best performance for your DCP, try this article:
[Crystal Reports XI R1 And R2 Dynamic Cascading Prompt Performance 1.8|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e073744a-693f-2b10-b5b8-b216437cb007]
I'd recommend the chapter "Cascading LOV Data Access Tuning", it explains how you can configure your LOV to ensure on-demand access for each level of the LOV.

Using a data source configured in Business View Manager?

Post Author: Rob
CA Forum: Crystal Reports
Hello,We're using Crystal Enterprise 10 service pack 6 on Server 2003 and I'm having a bit of a problem (surprise)! I've configured a data source in Business View Manager with the intention of the users not having to enter a password for the data source in a report. However, the data source has been stored in the repository but is not visible anywhere within Crystal Reports or the Enterprise web site at all. Any pointers as to the usage of said data source would be gratefully received!Thanks in advance,Rob

Post Author: yangster
CA Forum: Crystal Reports
You created a datasource connection in the BV Manger and then what?Did you make the corresponding Data Foundation, Business Element, and Business View?You can only report off the business view not a datasource.

Issue with creating List of Values in Business View Manager

Similar Messages

Maybe you are looking for