Issue with document library and explorer view

Hello,
I have couple of issues on which I need some assistance.
We recently backup and restore the SharePoint portal based on 2007 to SharePoint 2010 server.We're facing some issues on it now 
When we try to open any office document from a document library it gives a prompt  stating below message in image. I check the document, it is nowhere checked out and also I have full control on the site , in fact I am site collection admin.
Open with explorer view is not working. When we click on open with explorer it just refreshes the page and show the same page again.
Need help on this couple of issues.
Regards,
Mandar

In addition to Margriet her solution this article written by Amol Ghuge can help in troubleshooting problems with Explorer view:
http://sharepointknowledgebase.blogspot.nl/2013/09/open-with-explorer-is-disabled.html
- Dennis | Netherlands | Blog |
Twitter

Similar Messages

  • Issue with Crystal 11 and Activex Viewer

    Hi All,
      We have been using Crystal Enterprise 10 for long without any issues, Recently we had to move to Crystal 11 as our clients are not able to buy Crystal 10 any more.
    The crystal Report is run from our product using the activex viewer .The Report is invoked by passing
    the url in the following manner
    '/CSM/reports/Crystal//Case%20Solution%20Time.rpt?init=actx&USER0=sa&PASSWORD0='
    This worked perfectly with Crystal 10.
    But when trying to run the report with Crystal 11 it opens a file download box and then opens up the report in design time in Crystal Reports itself and not in the browser.
    I am not sure if this is a know problem or if things have changed (parameters etc.). I need to get this problem sorted asap. Any info on it is highly appreciated.
    Regards,
    Prachi

    Hi,
    In new versions of BOE you should be using a URL command called OpenDocument or alternatively Viewrpt.aspx/.jsp.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/800f7400-bf3e-2b10-fa81-c6c74f457ab4

  • Problems with WMP library and "album" view.

    Hello everyone! I've been searching for the reason of my problems, but I didn'tt found anything satisfacting, so i decided to ask u - i'm new here, so if it's the next post about next boring and obvious thing, I apologise
    Well... I'm a happy user of Zen Player for more than a year, but now I've got new OS - Vista(and I'm not so happy about this) and here my problems starts:
    I used to add covers of albums by grabbing and dropping covers' pictures into the icons of albums that had shown by choosing album view. Now it's not avaiable - I found here that it won't be possible, just by synchronizing player with Windows Media Player library. But when I think I've synchronized it, library is still empty!
    My most important questions:
    Is there any patch or something like that to make me possible adding covers like I used to?
    Is there any other ways to add them, except special programs?
    Thanks from mountains and sorry for my English - it's not good in "technical" sphere

    Not sure are you talking about the program library or the players? To add cover art to the icon find the picture (one the net) right-click choose copy image? go to the album icon right-click choose paste albumart.You then have to celet the album from the player & re-sync it to get the art to show
    anuula2 wrote:
    Hello everyone! I've been searching for the reason of my problems, but I didn'tt found anything satisfacting, so i decided to ask u - i'm new here, so if it's the next post about next boring and obvious thing, I apologise
    Well... I'm a happy user of Zen Player for more than a year, but now I've got new OS - Vista(and I'm not so happy about this) and here my problems starts:
    I used to add covers of albums by grabbing and dropping covers' pictures into the icons of albums that had shown by choosing album view. Now it's not avaiable - I found here that it won't be possible, just by synchronizing player with Windows Media Player library. But when I think I've synchronized it, library is still empty!
    My most important questions:
    Is there any patch or something like that to make me possible adding covers like I used to?
    Is there any other ways to add them, except special programs?
    Thanks from mountains and sorry for my English - it's not good in "technical" sphere

  • Issue with sound library and/or midi.... PLEASE HELP!

    Hello there,
                     I have Logic Pro 7. My problem is that I  have my midi keyboard connected to my laptop via usb. The midi does seem to work as I can see the signal on the screen but no sound. It may have something to do with the sound library though as there does not seem to be any sound files in the samples ( I have tried to just hear the samples such as a drum loop and it say's "file empty"). Does anyone have any idea of what might be happening?
    Any help much appreciated
    D

    create an audio instrument track in the arrange window and then choose the 'insert' function which is above the volume fader for that track, follow the menus to choose your software instrument which should give you the ability to choose between the soft synths, keyboards, ESX24 Sampler etc.
    Load one up and see what happens

  • In a document library : group by view and manage metadata filter & Navigation problem

    Hi all, I encounter a problem when configuring a document library using a group by view and in combination with the Managed Metadata filtering and
    navigation :
    - all the documents appear under my group by, even the ones that does not correspond
    - In the other hand, the number in brackets shows the correct number of documents that should be shown
    See screenshot below. 
    Did you already encounter that issue ? Is there a workaround ?

    Hi,
    According to your post, my understanding is that you wanted to use a group by view and combine with the Managed Metadata filtering and navigation in a document library
    to show the corresponding documents with the correct numbers in SharePoint 2013.
    In my SharePoint 2013, I created a view which was group by two columns and combine with the Metadata Navigation Hierarchies and Key Filters some fields in a document
    library. As a result, it showed only items matching the filter values.
    So, I recommend that you can follow the steps to implement it in your environment.
    Step1: Enable Metadata Navigation and Filtering:
    Metadata Navigation and Filtering is a Site Feature that has to be activated for this to work.
    And, the Metadata Navigation and Filtering feature is enabled by default on most sites.
    If it is not enabled for your site, you can enable it on the Site Features pages for your site.
    You must be a Site Owner or a Site Collection Administrator to enable Metadata Navigation and Filtering.
    1. Go to “Site Settings” and click “Manage site features” under Site Actions.
    2. Find “Metadata Navigation and Filtering” in the Features list and click “Activate”.
    Step2:
    Configure Metadata Navigation:
    You must have a least the Manage Lists permission level to configure metadata navigation for a list or library.
    1. Open the document library for which you want to configure metadata navigation.
    2. Go to “Library Settings” of the document library and click “Metadata navigation settings” under “General Settings”.
    3. In the Configure Navigation Hierarchies section, select the field or fields you want to display in the navigation hierarchy and then click “Add”.
    4. By default, Folders are automatically displayed in the navigation hierarchy. If you do not want folders to display, select Folders, and then click Remove.
    5. In the Configure Key Filters section, select the fields you want to add as Key Filters, and then click “Add”.
    6. In the Configure automatic column indexing for this list, specify whether you want to automatically create indices on this list to increase the performance of the
    queries that users will perform when they use the Navigation Hierarchy and Key Filter columns you've specified. It is recommended that you select the option “Automatically manage column indices on this list”.
    7. Click “OK”.
    Step3: Set a group by two columns by modifying view in the document library:
    1. Go to the “LIBRARY” ribbon of the document library and click the “Modify view”.
    2. Click the “Group By” and select up to two columns to determine what type of group and subgroup the items in the view will be displayed in.
    3. Click “OK”.
    Step4:
    Go back to the document library, apply Navigation Hierarchies and Key Filters to do a test in your environment.
    The result will like as below:
    There is an article about how to apply Metadata Navigation Filtering in SharePoint 2013 for your reference.
    http://blogs.interfacett.com/how-to-apply-metadata-navigation-filtering-in-sharepoint-2013
    Best Regards,
    Linda Li
    TechNet Community Support

  • URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

    Hello SAP community,
    I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
    When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
    But when I click than on NWA (example), I am getting "http 500 server error".
    I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
    But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
    Than it is working without problems with Windows 7 and Internet Explorer.
    I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
    We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
    Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
    Thanks for your help.
    Best regards
    Carlos

    Hi all,
    I think I found the solution.
    The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
    That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
    When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
    Internet Explorer Options => Settings for compatibility view => Add domain
    Best regards
    Carlos

  • How to read excel file in document library and store excel content in sql table

    Hello,
    Can anyone help me how to read the excel file present in document library and store the content inside excel into sql table?
    Please let me know the ways to acheive this. Feel free to give your suggestions.
    Thanks,
    Cool Developer

    Hi!
    this code i have written becuase i donot find any soltions on net for this , u can try with this . :)
    System.Data.OleDb.
    OleDbConnection ExcelConnection = null;
    FileMode fileMode;
    string filePath = ConfigurationManager.AppSettings["TempLoaction"] + "\\" + fileName;
    using (SPSite _site = new SPSite(SPContext.Current.Web.Url))
    using (SPWeb _web = _site.OpenWeb())
    string docLibrary = ConfigurationManager.AppSettings["DocumentLibrary"];
    SPFile _file = _web.GetFile("/" + docLibrary + "/" + fileName);
    fileMode =
    FileMode.Create;
    byte[] byteArray = _file.OpenBinary();
    MemoryStream dataStream = new MemoryStream(byteArray);
    Stream stream = dataStream;
    using (FileStream fs = File.Open(filePath, fileMode))
    byte[] buffer = new byte[4096];
    int bytesRead;
    while ((bytesRead = stream.Read(buffer, 0, buffer.Length)) != 0)
    fs.Write(buffer, 0, bytesRead);
    fs.Close();
    //Create the Connection String
    try
    string ConnectionString = @"Provider=Microsoft.Jet.OLEDB.4.0;
    Data Source ='"
    + filePath + "'; Extended Properties=Excel 5.0";
    //Create the connection
    ExcelConnection =
    new System.Data.OleDb.OleDbConnection(ConnectionString);
    //create a string for the query
    string ExcelQuery;
    //Sheet1 is the sheet name
    //create the query:
    //read columns from the Excel file
    ExcelQuery =
    "Select * from [Sheet1$]"; // from Sheet1";
    //use "Select * ... " to select the entire sheet
    //create the command
    System.Data.OleDb.
    OleDbCommand ExcelCommand = new System.Data.OleDb.OleDbCommand(ExcelQuery, ExcelConnection);
    //Open the connection
    ExcelConnection.Open();
    //Create a reader
    System.Data.OleDb.
    OleDbDataReader ExcelReader;
    ExcelReader = ExcelCommand.ExecuteReader();
    //For each row after the first
    while (ExcelReader.Read())
    thanks,
    kshitij

  • Issues with Exchange Account and Q10

    Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
    The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
    At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
    I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
    Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
    Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
    So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
    Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
    Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
    Model: SQN100-2
    OS Release: 10.1.0.2011
    OS Version: 10.1.0.2038
    Build ID: 525050
    Ian

    To follow-up with this issue:
    I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
    I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
    I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
    Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
    Ian

  • My itunes account shuts down for no reason.  It wont recognize my iphone and there is an issue with network connectivity and itunes.  I have already  reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done.  Ideas??

    My itunes account on windows xp shuts down for no reason.  If even try to delete something from my library it shuts down.   It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store.  I have already  reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done.  Ideas??

    Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

  • How do document permissions differ from its document library and a content roll-up webpart?

    I have an excel spreadsheet (a group schedule), in a document folder, on a page that only IT management can see/access/edit, in a site that all IT group members have access to.
         for example: http://IT Group site/IT Management Page/Schedule/2015.xlsx
    On the group's homepage, I have a content roll-up web part that displays all document library contents in the group site.
    IT management consists of 3 people. They can all edit the spreadsheet from the original location, but when they access the document from the content roll-up web part on the group's homepage, they cannot save any changes.
         Accessing the file from here: http://IT Group site - content roll-up web part link "2015.xlsx" points to "IT Group site/IT Management Page/Schedule/2015.xlsx"
    The error received says "'http://IT Group site/IT Management Page/Schedule/2015.xlsx' is read-only. To save a copy, click OK, then give the workbook a new name in the Save As dialog box."
    Where would the permission issue be?
    As the SharePoint site owner, I can access the file without any problems saving from either location. Also, I created an IT Management group that has full control over the IT Group site/IT Management Page, and full control over the IT Group site.
    Thanks for any info you can share.
    Stephanie

    Thanks Cameron -
    I have no special settings on the document library where the schedule is saved. No content approval necessary or different permissions. The library is set to open documents in client application, and check-in, check out is not activated.
    I have logged in to one of their computers. They can access the spreadsheet directly from the document library and make changes freely, and save that version directly to the server, but not from any web parts. Just to test, I created a summary link web part
    on the same page that lists the document library, created a link to the file, and the file opens, but they cannot save any changes without renaming the file. The only place they can truly edit the spreadsheet without renaming is from the document library
    directly.

  • Detect what the default edit form is for a document library and list using jquery

    Hi,
    So what I have done is with some jquery made it that when a files are dragged and dropped into a document library and there is a required field such as "Metadata" the EditForm.aspx opens up for the user to fill in the required column. I am building
    the url up from what I have found in SharePoints DragDrop.js file. This is all working perfectly I just need to find a way to dynamically find what the default edit form is for that document library as I have just hardcoded like this...
    g_currentControl.strSiteUrl + "/" + this.ListName + "/Forms/EditForm.aspx?ID=" + id
    So I need a way to figure out what the default edit form is instead of hard coding like this in case someone creates a custom_editform.aspx or something for one of the lists.
    Thanks

    You can get it by hitting this REST end point via JQuery:
    http://weburl/_api/Web/Lists(guid'YOURLISTGUID')/Forms
    Chris Givens CEO, Architecting Connected Systems
    Blog Twitter

  • Issues with Office 2010 and Acrobat Pro 8

    Good Day All;
    We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
    Any comments would be helpful
    Regards
    Chomp

    Acrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
    Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination.

  • Issue with Home Address and Phone of ESS(data not getting saved)

    Hi Everyone,
    We have a issue with ESS HomeAddress and Phone.  when we edit and save data, its showing a message that data is saved.  but the data is not getting updated in the backend and the view also is showing old data only.  Pleas help us, if anyone came across this type of issue.
    Thanks & Regards,
    Ravi

    Please check the fields you are editing are not marked as unused in
    V_T588M
    V_T588MFPROPS
    V_T588MFPROPC
    Best wishes
    Stuart

  • I deleted some videos on my ipad before synching with my library, and now I can't find them.  How can i get them back?

    I deleted some videos on my ipad before synching with my library, and now I can't find them.  How can i get them back?

    Do you live in the United States? If you do then you can download them again for free - as long as the movies are available for free downloads. Apple has not forged agreements with every movie studio yet so you just have to check.
    Launch iTunes, and tap on the purchased tab. In the upper left corner you will see a "View" button. Tap that in order to toggle among music, TV Shows and Movies. Select Movies and then see if the movies appear. If they do, tap the Movie icon and then tap the cloud icon next to the icon in order to begin the download.
    You have to use the same Apple ID that you used to purchase them.
    If you do not live in the U.S. then you will have to purchase them again.

  • Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

    Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

    That shows you that iPhoto is working correctly and whatever issue you are having is based in your original library.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

Maybe you are looking for