Issue with sound library and/or midi.... PLEASE HELP!

Hello there,
                 I have Logic Pro 7. My problem is that I  have my midi keyboard connected to my laptop via usb. The midi does seem to work as I can see the signal on the screen but no sound. It may have something to do with the sound library though as there does not seem to be any sound files in the samples ( I have tried to just hear the samples such as a drum loop and it say's "file empty"). Does anyone have any idea of what might be happening?
Any help much appreciated
D

create an audio instrument track in the arrange window and then choose the 'insert' function which is above the volume fader for that track, follow the menus to choose your software instrument which should give you the ability to choose between the soft synths, keyboards, ESX24 Sampler etc.
Load one up and see what happens

Similar Messages

  • We use dial up and upon updating to Firefox 10 we have had issues with facebook/ playing games...please help!

    We use dial up and upon updating to Firefox 10 we have had issues with facebook/playing games...please help!

    Hi nancybrendel,
    Have you looked at the Knowledge Base article [[Problems using Facebook in Firefox]]? There is a lot of good troubleshooting information in there. Please be sure to try all of the suggested steps. Each one is valuable and may be the answer to your issue.
    Hopefully this helps!

  • Issue with 2504 WLC and 2602 AP. need help please.

    Somehow the AP does not associates with the 2504 controller.
    What could possibily be the issue.
    Thanks in advance.
    Anyway,  Here is the log from the AP.
    AP log
    ===========================================================
    *Mar  1 00:30:35.551: %CAPWAP-5-DHCP_OPTION_43: Controller address 192.168.120.4 obtained through DHCP
    *Mar  1 00:30:35.551: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
    *Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'SNGNY-WLC1'running version 7.0.220.0 is rejected.
    *Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
    *Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
    *Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 192.168.120.4
    ===========================================================
    show version output from the Access Point
    =========================================================
    AP0006.f6ec.be2a#show ver
    Cisco IOS Software, C2600 Software (AP3G2-RCVK9W8-M), Version 15.2(2)JB, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Tue 11-Dec-12 00:07 by prod_rel_team
    ROM: Bootstrap program is C2600 boot loader
    BOOTLDR: C2600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(25e)JA1, RELEASE SOFTWARE (fc1)
    AP0006.f6ec.be2a uptime is 33 minutes
    System returned to ROM by power-on
    System image file is "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx"
    Last reload reason:
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    --More--
    *Mar  1 00:33:46.071: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
    *Mar  1 00:33:46.171: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.120.98, mask 255.255.255.0, hostname AP0006.f6ec.be2a
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-CAP2602I-A-K9    (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
    Processor board ID FGL1704ZC0Q
    PowerPC CPU at 800Mhz, revision number 0x2151
    Last reset from power-on
    LWAPP image version 7.4.1.37
    1 Gigabit Ethernet interface
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:06:F6:EC:BE:2A
    Part Number                          : 73-14588-02
    PCA Assembly Number                  : 800-37899-01
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC165188Y4
    Top Assembly Part Number             : 800-38356-01
    Top Assembly Serial Number           : FGL1704ZC0Q
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-CAP2602I-A-K9  
    Configuration register is 0xF
    ========================================================

    Blake's right.  Your WLC is running 7.0.X code which does not support the AP2600.  Check the Release Notes and look under Software Release Support for Access Points to determine what suitable firmware your WLC can support your AP.

  • HT4199 Hello Im have issues with my Face time app. Please help.

    When loading Facetime I am prompted with a message that reads....The server encountered an error processing registration. Please try again later....
    Thus, I have tried to make a new account and I'm still unable to create one.

    This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
    Step 1
    Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
    Step 2
    Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
    Step 3
    Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
    Step 4
    From the menu bar, select
     ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
    Step 5
    Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
    Step 6
    From the menu bar, select
     ▹ System Preferences ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
    The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
    Step 7
    Select from the menu bar
     ▹ System Preferences… ▹ Flash Player ▹ Storage
    and click
    Block all sites from storing information on this computer
    Close the preference pane.
    Step 8
    Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
    Step 9
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    If iMessage worked in the guest account, stop here and post your results.
    Step 10
    Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
    If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
    Step 11
    Reset the NVRAM.
    Step 12
    Reinstall OS X.
    Step 13
    If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

  • "iphone synced with another library" it isn't; please help.

    Hi all
    Tried to put a new CD onto my new iPhone 6 via iTunes.
    Music moves over to Itunes no problem, but refuses to move to phone. Greyed out with a dashed circle to left of each track name.
    Tried to move music manually; says "The iPhone “Andrew iPhone6” is synced with another iTunes library on “OFFICE-PC”. Do you want to erase this iPhone and sync with this iTunes library?"
    My office PC went 3 years ago; I've checked, and I only have my Mac authorised on my account.
    PLEASE HELP. I'm going mental trying to figure this out!
    I love Apple but am struggling to see how iTunes is intuitive. Everything else Apple is so simple, iTunes is utterly annoying & time consuming.
    PLEASE NOTE:
    iMac running latest version of Yosemite....though interestingly it says "135122" where it should say Yosemite?? V10.10.2
    Brand new iPhone 6 running latest IOS 8 version. (obviously never had it when I had my PC 3+ years ago)

    The some computer glitch occurred and now iTunes thinks it was synced to another library.
    To resolve:
    - get all the synced media like apps and music in the iTunes library.
    - Connect the iPod to the computer and make a backup. See:
    iOS: How to back up
    - Restore the iPod from that backup. The above link includes those instructions.

  • Home Sharing Issue Windows 7 x64 and Ipad 2 - Please Help!!!

    Hi all,
    Having problems getting remote sharing to work. I am able to pair the ipad with my itunes library so obviously they can see and talk to each other but when it searches for the home share it gives message "could not find".
    not sure if its relevant but i also cant sync the ipad wirelessly.

    Those that have issue with Apple TV will be here those that don't won't because they will be just enjoying themselves.
    A few more things to try.
    To force quit Remote on your iOS device, double-click the Home button (to view your recently used apps) and then touch and hold the Remote app icon until it begins to jiggle, then tap . Remote is added to recent apps again the next time you open it.
    Do you have the latest iTunes 10.5.1?
    Is iTunes > Preferences > Sharing tab > Share my library on my local network
    and Share entire library selected.
    Is your iTunes > Advanced > Home Sharing turn ON? (Try also to sign off and sign back on again)
    Reboot your router (also update your router)
    Is your router WMM On?
    Remote uses TCP port 3689 and UDP port 5353 to communicate with your iTunes.  To configure your firewall to add these ports.

  • Having problems with HP6980 printer and Windows 7, please help

    I just replaced my XP computer with a new HP computer running Windows 7.  Each time I turn on my HP 6980 printer, it won't print.  When I go to Devices and Printers, I see that it is offline.  I have to delete the printer and reinstall it to make it work and this solution is only good for the session.  I have to repeat the process each time that I turn on the computer.  Please help.

    Try running this next time you get the issue:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&lc=en&dlc=en&cc=us&...
    This should fix the offline issue instead of reinstalling.
    I work for HP but my posts and replies are my own thoughts.
    If I have solved your issue, please feel free to provide kudos
    Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

  • Having trouble with condenser microphone and Logic Pro. please help

    I purchased a condenser microphone that runs only with phantom power. I have an XLR cable from the mic into the phantom power interface and have an XLR to USB plugged into my computer, when i go to logic audio preferences it doesnt show that the microphone is even connected (ive checked input and output). Ive even tried it on other programs and i still get nothing. Please Help.

    I have an XLR cable from the mic into the phantom power interface
    What phantom interface is this, make and model.
    XLR to USB plugged into my computer
    What is this? Just a cable?
    What microphone is it?
    Trying to get an idea of your signal chain as, in your original post, your signal chain makes little sense. Do you have an audio interface or is that the phantom power interface you are referring to? A microphone isn't an interface and a mic, in itself, won't show up in Logic prefs (unless it was a USB mic, which it is not).

  • Issues with restarting after a program crash- please help

    Two questions regarding restarting after a program has crashed on Leopard.
    1. I had an issue where Parallels crashed and I had to restart. When restarting, the dock closes and it goes to a point where there is a circle timer. This does not stop and an error comes up stating that I need to hit the power button. Is this "normal" after a program crash and restarting? On a side note, I couldn't close the program with Force Quit. This seems to be happening often.
    2. How often does it occur for you where a program will not close with Force Quit? I've had Parallels crash and some other programs. When this happens, Force Quit doesn't do anything. Any other options?
    Thanks for your help.

    You should check your startup drive as a starting point, if programs are crashing regularly. That's obviously not "normal." Run +Repair Disk Permissions+ in Disk Utility while started up normally. Then, start up from another disc and run Disk Utility to use the +Repair Disk+ on the startup drive, to look for disk directory issues (you can startup from the Mac OS X installation disc to run Disk Utility).
    When this happens, Force Quit doesn't do anything. Any other options?
    You can start the Activity Monitor program and quit processes that look relevant to the app. Sometimes, force quit does not work to quit an app because an underlying process keeps running. Sometimes, the Mac is not able to restart or shutdown normally because an app refuses to quit, due to this problem. It is often difficult to know if you should kill a process, so after doing it to make an app quit, it would be a good idea to restart.

  • " Compatibility issues with power management. on g50 45 . please help.

    LENOVO G50-45my BIOS is up to date and I updated my power management system just yesterday. The battery also drains very quickly , just 90 minutes. Please help.I am getting this problem since a week now. and my battery drains so quickly even when on power saver mode. when i click on the message , I get no solution although my laptop is connected to internet it says , its not connected.And when i click on it , it says ,  Now if I click " View all problem this applies to , it says a different thing, there are two things saying the sam thing, driver software installation. wheni click one of them it says, " Pnp driver not found" PLEASE HELP. Thank you. I want my power manageent system back. 

    You should check your startup drive as a starting point, if programs are crashing regularly. That's obviously not "normal." Run +Repair Disk Permissions+ in Disk Utility while started up normally. Then, start up from another disc and run Disk Utility to use the +Repair Disk+ on the startup drive, to look for disk directory issues (you can startup from the Mac OS X installation disc to run Disk Utility).
    When this happens, Force Quit doesn't do anything. Any other options?
    You can start the Activity Monitor program and quit processes that look relevant to the app. Sometimes, force quit does not work to quit an app because an underlying process keeps running. Sometimes, the Mac is not able to restart or shutdown normally because an app refuses to quit, due to this problem. It is often difficult to know if you should kill a process, so after doing it to make an app quit, it would be a good idea to restart.

  • E2000 NAT issues with my xbox. ive tried everything please help!

    ive tried the dmz port range triggering, forwarding. ive done it all please help me all i want to do is a play  little online.

    what is the modem that you are using? some internet provider use a modem/router instead of a 'modem only' device.
    if it is a modem/router they  have NAT enabled, and this would cause Double NAT on the modem and on the linksys router, which would cause the port forwarding setup not to work.
    if that is the case you need to ask your provider to set your modem/router to bridge mode or work as modem only. when that is done, then you can proceed to port forwarding by following the instructions here

  • Issue with document library and explorer view

    Hello,
    I have couple of issues on which I need some assistance.
    We recently backup and restore the SharePoint portal based on 2007 to SharePoint 2010 server.We're facing some issues on it now 
    When we try to open any office document from a document library it gives a prompt  stating below message in image. I check the document, it is nowhere checked out and also I have full control on the site , in fact I am site collection admin.
    Open with explorer view is not working. When we click on open with explorer it just refreshes the page and show the same page again.
    Need help on this couple of issues.
    Regards,
    Mandar

    In addition to Margriet her solution this article written by Amol Ghuge can help in troubleshooting problems with Explorer view:
    http://sharepointknowledgebase.blogspot.nl/2013/09/open-with-explorer-is-disabled.html
    - Dennis | Netherlands | Blog |
    Twitter

  • Prod issue with Inventory management in BW ..please help

    hi Folks
    i am new into inventory management extraction into BW. i have read all the document regarding the extraction. My question is
    1. what all the comon produciton issues you wil come across when you do the inventory management
    2. what is the dificlut challenge you face during extraction and validation
    3. what all things you need to consider or keep in mind while doing this process
    4. what is pros and cons of this process ..any bettar way to improve this process?
    please shoot me your thougths ..which will helpfull for my new task..

    My Dear Friend...
    Typical Steps for refreshing your understanding :
    1. Transfer Business Content Datasources 2LIS_03_BX , 2LIS_03_BF, AND 2LIS_03_UM in RSA5.
    2. Go to Transaction LBWE, Activate Datasources 2LIS_03_BF, AND 2LIS_03_UM.
    3. Go to Transaction MCB_ select SAP BW usage 'Standard' Radio button.
    4. Save it.
    5. Go to Transaction MCNB, enter name of run ‘Stock_init’. Enter Termination date in future. Enter Datasource as 2LIS_03_BX.
    6. Execute the initialization.
    7. Entries can be found in SETUP Table MC03BFSETUP & MC03BFSETUP.
    8. Run SETUP for 2LIS_03_BF, AND 2LIS_03_UM using TCodes OLI1BW and OLIZBW respectively.
    ALWAYS LOAD in order as BX datasource first then BF datasource and then UM datasource in cube
    9. Run the extraction for 2LIS_03_BX in BW.
    10. Compress the request with ‘No Marker Update’ NOT SET i.e. unticked or unchecked.
    11. Run the extraction for 2LIS_03_BF in BW.
    12. Compress the request with ‘No Marker Update’ SET i.e. ticked or checked.
    13. Run the extraction for 2LIS_03_UM in BW.
    14. Compress the request with ‘No Marker Update’ SET i.e. ticked or checked.
    Steps 1 and 2 shall be executed in Development and transported to production and step 3 onward should be carried out in Production itself with posting Block.
    And about Reconcilitation of data ...Count the number of records in R/3 in particular table and check with BW is its matching...When you request in Detail Tab you can find the number of records...
    Then check if the balances are matching in R/3 and BW...saying for ex: Check opening Stock for today in both the systems...
    If you follow the process properly I dont think you will face any issues...I havent ever seen any complication in Inventory loading...Dont worry...Just follow the typical LO Extraction steps...All Good
    Regards...
    Sandhya

  • Com port failed with boot camp and snow leopard - Please help!

    Hi. I have been a very happy leopard and macbook user for the last couple of years. This week I upgraded to a macbook pro with OS X 10.6 snow leopard. I set up boot camp with Windows XP SP3as I have a couple of windows only applications that I need to use and they both need serial port. I had a Keyspan USA 19-QW serial adaptor that worked fine with Leopard and my old macbook. I installed the driver that came with the Keyspan adaptor. Now when I plug the adaptor into the USB slot it finds new hardware and says it is ready to use and the adaptor is listed in my ports as being on COM3 in device manager in windows but when I try to run the programs I get the message 'the selected port could not be opened. Either the port is in use by another application, or the port doesn't exist'. I'd be very grateful for any advice you can give me to solve this problem. Do I need to buy a new adaptor? Is this a settings or driver issue? I'm a user and not a techie person so please can you leave me easy step by step help. Many thanks. Karen

    And was wodering if snow Leopard is pré installed
    Yes.
    And also which disc that came with thé machine has boot camp on it
    None. Windows is a separate purchase.
    i havé read that to install windows7 you need to pût thé snow leopard disc in to complete thé installation
    That refers to the Boot Camp drivers for Windows, not Windows itself.
    (53272)

  • RFC Destination with other Environments and Execute. Please help

    Hi GURU,
    I have a problem and I would like your help.
    I'm new at Abap and I'm trying to develop an application from ABAP to connect to an environment of java.
    I watched how to do this in various forums and the help of SAP, but just as I have found make the connection.
    In java I have already developed the server side and I have developed a ABAP function. But is not exactly how it works.
    Can you give me an example of how to send data from the sap application to java? Or give me any manual please.
    Another problem is,
    As I record the RFC destination?
    When I run a BAPI ABAP occurs to me the following error:
    RfcExecProgram'#Win32 error 2
    Because it can be?
    Thank you very much in advance
    RAFA

    The (Alesis Digital Audio Tape) ADAT optical I/O gives 8 channels up to 48Khz 24bit and 4 I/O at 88.2, 96 Khz... this are the technical specifications for this connectors!
    http://www.nationmaster.com/encyclopedia/ADAT
    If you need to use 8 ADAT I/O at 88.2/96 you need to buy device such as
    Yamaha MY16at (for Yamaha Digital Mixer) http://www.studiocare.com/store/index.php?mainpage=product_info&productsid=62346
    and similar devices
    ... or Motu 828MK3 that comes with 2X ADAT I/O....
    Motu 828MK3 is able to work with up to 8 ADAT channels at 88.2/96 and up to 16 ADAT I/O at 44.1/48.
    BUT... Apogee Ensemble comes with only 1X ADAT I/O... so you can use up to 4X 88.2 I/O channels and you need a second Ensemble unit for reach 8 ADAT I/O.
    Optical connectors can be used also for 2 I/O at 192Khz...
    in this case this kind of connection will be named as TosLink, even if it uses the same ADAT plug.
    cheers
    G

Maybe you are looking for