Issue with F110 - FREE SELECTION TAB.

Hi All,
I am facing one problem for updating the FREE SELECTION TAB for FIELD NAME and its corresponding value. For this update I am using BDC.
If I create the proposal manually then the values get display after saving the proposal entry. But if I do the same through recording, it does display the message on status bar as "Details have been saved for the run".
Any help is appreciated.
Thanks,
Atul

Following is the recording that works in 4.7 but doesnt work in ECC 6.0 version.
The values under free selection gets clear in ECC 6.0
Can anyone please help.. !!!
Thanks in advance..
Atul
report ZF110_NEW
       no standard page heading line-size 255.
include bdcrecx1.
start-of-selection.
perform open_group.
perform bdc_dynpro      using 'SAPF110V' '0200'.
perform bdc_field       using 'BDC_CURSOR'
                              'F110V-LAUFI'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SEL'.
perform bdc_field       using 'F110V-LAUFD'
                              '01/22/2007'.
perform bdc_field       using 'F110V-LAUFI'
                              '2712'.
perform bdc_dynpro      using 'SAPF110V' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
perform bdc_field       using 'BDC_CURSOR'
                              'F110V-LIST1(02)'.
perform bdc_field       using 'F110V-TEXT1(01)'
                              'BKPF-BELNR'.
perform bdc_field       using 'F110V-TEXT1(02)'
                              'LFA1-LAND1'.
perform bdc_field       using 'F110V-LIST1(01)'
                              '1000001'.
perform bdc_field       using 'F110V-LIST1(02)'
                              'PA'.
perform bdc_dynpro      using 'SAPF110V' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBCK'.
perform bdc_dynpro      using 'SAPF110V' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBCK'.
perform bdc_field       using 'BDC_CURSOR'
                              'F110V-LAUFD'.
perform bdc_transaction using 'F110'.
perform close_group.

Similar Messages

How to make field ( F110V-LIST1 ) mandatatory in free selection tab of F110

hi
How to make field ( F110V-LIST1 ) mandatatory in free selection tab of F110
regards,
Billa

Hi,
Standard transaction variant is not possible ,i dont want to use as zf110.
Regards,
Billa
Edited by: Billa Mahe on Sep 3, 2010 3:14 PM

F110 free selections bseg-werks

I am trying to include the bseg-werks field (Center) as a parameter for the free selections in the automatic payment run setting (f110) but the listings of options include many bseg fields but werks. I would sure appreciate your help in this matter.

WERKS is the field for Plant. When you select the Free Selection tab, you have the option of selecting Document, Vendor Master or Customer Master. Both the Vendor Master and the Customer Master have the WERKS field available. Unfortunately, the plant field is not available at the line items level. You may have to be a bit more creative and find another way to go after it if you need it at the line item.
I hope this helps!

Payment Program Free selection tab fields

Hi,
We would like to pay the vendors against the open items which are due upto a date in the past. For example when we run the payment proposal today(05-10-2011) we want the system to list and pay the invoices which were due on a date a week ago(05-03-2011).
The due date field is not available in Free Selection tab to exclude. Any idea how to make it working?
Thanks
Ram

Dear:
Due date is calculated from the date at which proposal is run and posted you can make proposal run in back date as well. IN free selection tab when you give invoice numbers, the system will automatically pick the invoices coming within the range and leave the invoices not yet due.
REGARDS

There seems to be an issue with opendns free servers

''(Locked. Not a support question. See bold text for reasons of locking -m)''
This is more of a "I found it" than a question as this seems to be an issue with the opendns free DNS servers related to certain torrent sites and the duckduckgo search engine. However any thoughts are appreciated.
While looking for a solution I followed troubleshooting steps found here to no avail regarding cookies (I'm accepting them from everyone including third party cookies and their dogs), clearing cookies (do that all the time as a matter of routine, did it again several times), clearing the cache (did that, got the T-shirt, now I'll never be naked) and checked the about:config setting (I forget which one but it was already set to 20, the default)
Note that I can eliminate these issues completely by setting my DNS to "automatic" however I've been using opendns free DNS servers for years and have changed nothing except when troubleshooting this issue.
The following is a detailed description. It can be confusing if you don't read it carefully:
I had this happen on several torrent sites however I can get through on others but when I choose the .torrent link I get the same problem on most like at: http://kickass.to/movies/genre/news/ and the KAT mirrors... on KAT I can get to the page but the .torrent links are at http://torcache.net and I am unable to get those .torrents at all. (getting the "the page isn't redirecting properly" Firefox error message and the very long http://guidetest.a.id.opendns.com/?url=guidetest%2E (goes on forever) URL
I'll post a few links that I've tried (just to see if they work) below.
http://www.torrentz.eu/ - can't see the page at all, I get the "the page isn't redirecting properly" Firefox error message and it redirects to the URL: http://guidetest.a.id.opendns.com/?url=g...Ecom%(goes on for something like a couple of hundred characters)
Same issue with several other torrent sites...
lazypirate.net I can't get through at all - same issue
http://extratorrent.cc/ - no problem with pages or .torrents
http://isohunt.to/ - again no problem with pages or .torrents
Particular torrents I get the:"the page isn't redirecting properly" Firefox error message and it redirects to the URL: guidetest.a.id.opendns.com/?url=guidetest%2Ea%2Eid (blah blah forever) are:
http://thetorrent.org/A5F7D7D92D8CDE2576...9B.torrent : (getting the "the page isn't redirecting properly" Firefox error message and the very long http://guidetest.a.id.opendns.com/?url=guidetest%2E (goes on forver) URL
I can go on to list individual .torrents but I think you get the idea...
I've had this issue with more than a few torrents over the last couple of days and can't remember them all but further checking does seem like it's either particular torrent sites I can't access at all or on sites I can access but store their .torrent files on either torcache.net or thetorrent.org so there seems to be mixed issues, being able to see some pages but not get .torrent files from those sites if they're stored somewhere else.
On duckduckgo I get the "this site is untrusted" error.
Again, when I abandon the opendns DNS servers I've been using for years and go to "automatic" both of these issues disappear with no other changes. and I've done that several times just to verify the problem and even confirmed that the opendns server addresses are correct, which they are the same ones I've used for years.
I've emailed opendns and described the issue and they are completely confused and tell me "it must be your settings"
'''Although this doesn't seem to be a Firefox or a Windows issue, I'm using FF 28.0 on win XP Pro SP3, legal OEM copy, Pentium D, 3.66 GHz, and 4 GB or Ram (3.65 GB of RAM recognized by XP, this is normal)'''
'''Again, this issue only happens with the opendns free DNS servers I've been using for years and vanishes completely when I choose the automatic DNS setting and has only been happening a few days.'''
I have screenshots of the errors and thought there was a way to post them here but I don't see that.
The error on torrent sites is "The page isn't redirecting properly. FF has detected that the server is redirecting the request for this address in a way that will never complete. (and goes on to say blah blah cookies blah blah that I've checked and rechecked)
The error on duckduckgo is "This Connection is Untrusted. You have asked Firefox to connect securely to duckduckgo.com, but we can't confirm that your connection is secure." blah blah (you probably know the rest). I expect that I could add an exception but again the problem doesn't happen when using automatic DNS server detection.
I have no problems on other sites that I see.

Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post. 
Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

IOS 8.1.1 - Issues with hands free (Parrot MKi9100)

Dear Community...
I have updated my iPhone 5 to iOS 8.1.1. Exactly since that day I am experiencing an issue with my in-car hands free kit (Parrot MKi9100):
Normally, while the iPhone and the hands free kit are connected, whenever the iPhone makes a sound (be it phone-calls, music, notifications or the text-to-speech function), the hands free kit jumps in, muting my car radio and playing the iPhone-Sound over the car speakers.
On iOS 8.0, that would only function with phone-calls, any other sound was not transferred to the hands free kit.
On iOS 8.1, the issue was fixed, and everything worked fine.
On iOS 8.1.1 the following happens: Whenever I wake my iPhone (i.e. pressing home-button or sleep-wake button, even without unlocking the phone) the hands free kit jumps in and mutes the radio... although the iPhone is not about to make a sound... This also happens, when the iPhone is switched to silent mode. Whenever the iPhone-Display is switched on, this will mute my car radio, as if the hands free kit was awaiting a sound from the iPhone.
This makes it impossible to enjoy the car radio and using the phone (of course only the passenger will use the phone, while I'm driving... I am a responsible driver...)
But nonetheless: Is there any known fix?
@apple: If not, will this be fixed with 8.1.2?
Thanks and best regards
cihag

#cihag
i have the same problem with Parrot MKi9100. Before on 8.1 all works fine!
Apple WHY ????????????????????????????
Bye

Has anyone had any issue with opening a new tab and the address bar not connecting to websites in 33.1.1?

I think ever since we moved to v33, I've been having an irritating issue that whenever I open a new tab that isn't connected to a website yet and try to enter a website address, it won't connect to ANY website. Doesn't matter if I hit Enter to try to make it go, doesn't matter if I click the right-pointing arrow button to make it go, doesn't work. I can go into a tab already connected to a website, type in a new website there and it'll create a new tab and take me to the new website, but not if I use new tab button.
Anyone else had this issue? Any fixes?

Sorry, that didn't help as I'm able to connect to websites, just not in a particular way.
For instance, I am able to type in and connect to websites IF the tab is already in use with a website (i.e. if I were to type "yahoo.com" in the address bar of this tab FF would open a new tab and take me to yahoo.com) but not when it is a completely new tab.

Issue withe Info Package Selection for the CRM Datasource

Hello,
I have a custom CRM data-source which has the Selection option as CRM-GUID as the Selection option in the RSA3.
I have replicated the Same Data-source in BI system and Created the Info Package ,but i could not see that GUID Selection in the Info Package.
To Be Noted:
I went to RSA6 enabled the selection option( check Box ) , there is no hide option in the datasource , only the Selection option check box is enabled in the RSA6 .
Replicated again , and activated again , logged out and logged in again . But the Info Package does not show the CRM - GUID selection option.
I found something not sure this might be the issue:
1) The Data type is RAW with length 16.
2) The Datasource in the BI side has SS conversion Routine Blank for this field and the Selection has X.
But no Selection option in the Info Package.
Any suggestion and inputs are welcome.
Thanks in advance.
Adhvi.

similar issue is disussed in the below thread...
Info package Selection were hidden
Info Package Selection Language key is not diplaying while this is checked
search for any SAP Note which explains about data type RAW ....

TS2634 Having issues with touch screen selecting keys and buttons I don't touch

I'm having issues when messaging or using the browser with the key pad it will jump up and down the screen, select buttons I don't want or the wrong messages. It basically wigs out at times, usually when I'm charging it, or listening to a radio station and trying to message at the same time. Any suggestions on why this is happening or how to fix it?

thana88,
Sorry to hear that you have had multiple service events, and yet problems persist.
Please send me a private message with your contact information - name, phone number and the type / serial number of your flex 14. If you have any of the service case numbers, please include these as well..
We can work to escalate this
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Issue with interest free period

So I am looking in the ad today and see you have the 18 months on purchase of 429 or more. Then on the website itself it still shows the 12 month no interest on purchase of 399 or more. I cant even choose store pickup if I wanted because the website only allows the 12 month.
I like to do the store pickup when there is an item I know exactly what I want. In order for me to get the 18%, I had to actually go in the store with no guarantee my item would be available. Luckily it was there and I didnt waste my time. So if certain stores are going to give the 18 months then and you choose that store for pickup it should reflect that in the shopping cart when checking out.
For example
I purchased an ipad because yesterday because they had a great price for Friday-Saturday only for 399.99. I was also getting a case for it. I tried to do it online and only gave me the 12 months. I had to actually go in the store to get the 18 months.
Hope you can get this cleared up on yoru website.

Hello there iliketoshop-
I’m going to play Captain Obvious here for a moment and say that you must like to shop! Our financing options can provide some great opportunities for our customers to get the latest and greatest from Best Buy and it’s awesome that you want to benefit from it.
Currently, BestBuy.com offers 6 month and 12 month financing plans for purchases of varying amounts. You can find more details on those plans here. However, on occasion, we will offer special financing offers, such as the 18 month plan for select categories or purchase amounts. However, those plans are generally only available in-store as an incentive to bring customers in. It sounds like kst8no1 was kind enough to point that out in his replies.
However, we always value feedback from our customers about how we can serve them better, so I will definitely forward on your insights to our support teams.
Thanks for connecting with us!
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Issue with F110

Hi All,
I have configured F110 and it is currently working for invoices created in the paying company code. So i have one company code that makes the payments for all the company codes. When i create invoices in other company codes, F110 errors out when i try to edit or view the proposal. The error message i get is, " Company codes XXXX\XXXX do not appear in proposal xxx\xxxx, correct". When i look at the log it says that no records were selected. What am i doing wrong? I have looked over the config many times but i can not find what i am missing. Please help.
I appreciate your help and will reward points generously.
Edited by: Aziz Khan on Apr 23, 2008 7:55 PM

its either because the payment method is not in the document, go to fb02 and enter the payment method there( make sure the payment method is in the vendor master
make sure the next payment date is after the invoice is due.
make sure that the vendor master is updated properly i.e the city, street , postal code etc are filled out.
Also check is the vendor is locked in antoher proposal.
once you find the problem - delete the proposal and recreate it
Points will be appreciated
Regards,
Zaid Azam

Issue with Blank Value selection in Dropdown List

Hello Experts,
                    I am facing one strange issue in Adobe Forms Drop Down(DD) list. Foll. is the list data which contains a several item data & blank value. After item data selection user must be able to select blank value in case he doesn't want to set the value to Order Unit as shown in screen shot below.
                              Now my issue is after any of the item values selection (for ex. BAG - BAG) user is not able to set the blank value again at my client system. However its working fine in mine. When checked client is using Adobe Reader 8.0 which is same as mine.
Thanks in advance.
Regards,
Amit

Hi Steve,
               Thanks for the reply. We have a blank value in the DD as a list item, where key & description is empty space. As i posted above user must be able to select that blank item if doesn't want any value for Order Unit. This selection is working fine in my sytem, but my client facing the issue where he can not select the blank value from DD.
Thanks,
Amit

Photoshop Marquee tool issue with unwanted opposite selections

What is the cause and fix for this:
screenshot
I am clicked on that layer.
I choose the Marquee tool.
I click around the area I want to select.
Phtoshop, not me, creates these inexplicable unwanted selection areas opposite of what I want, they are unwanted.
At times, these unselected or deselected areas run off the page.
At times I begin or end my selection off the canvas NOT always.
I have lived with this for months (maybe years) but it has got to stop.
Anyone ANYone?? know what is causeing this??

The first thing to try is a reset of the Marquee tool by right clicking on it in the Tools Option bar at the top. Choose Reset Tool.
It usually fixes forgotten adjustments and other glitches that causes a tool to malfunction.
Ctrl click if you own a Mac.

Issues with CAL Free Solution - SAP BPM and Operational Process Intelligence on SAP HANA [developer edition]

Hi,
When I want to suscribe to the CAL Free Solution - SAP BPM and Operational Process Intelligence on SAP HANA, on the Terms and conditions page, even if I scroll down, the button "I accept" is not available.
Do you have any tips ?

I am trying to download the SAP BPM and Operational Process Intelligence on SAP HANA [trial edition] - AWS version and get a security error.
Any ideas where we can get a 90 demo version of SAP PO/PI that will work with AWS? I am trying to refresh myself on PI7.4?

JDBC comm.channel issue with MS SQL select statement

Hello,
We are using JDBC adapter to connect to an MS SQL database.
This is the comm.channel config.
com.microsoft.sqlserver.jdbc.SQLServerDriver
jdbc:sqlserver://<DNSname>:1433;databaseName=PSMI
Activation of channel is successful.
But when starting a select on a table of the database we will get this error for any table there in comm.channel monitoring.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'TABLENAME' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'SAP_Header'.
Error processing request in sax parser: Error when executing statement for table/stored proc. 'TABLENAME' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'SAP_Header'.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'TABLENAME' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'SAP_Header'.
The table is existing because we can access it from excel database connect.
The connect address is the same in Excel as in comm.channel.
Installed driver is for JDBC for 2000/2005 (1.2/4). for JDK 1.4
Your help is really appreciated!
Best regards
Dirk

Hi Dirk,
This is the comm.channel config.
com.microsoft.sqlserver.jdbc.SQLServerDriver
jdbc:sqlserver://<DNSname>:1433;databaseName=PSMI
I hope the DNSname you using is your Server name of the SQL Server (IP/ServerName) you trying to connect to.
Please ensure that if you are using Hostname the entry is made in the host file at server level against the IP.
Try using the Connection string as :
jdbc:microsoft:sqlserver://IP(hostname)\ServerName;DatabaseName
Cheers
Dhwani
Edited by: dhwani kamdar on Jun 11, 2010 5:31 PM

Issue with F110 - FREE SELECTION TAB.

Similar Messages

Maybe you are looking for