Issue with JMS Receiver Comm. Channel using Seeburger AttribMapper

Hello,
I'm using a JMS_RECEIVER Comm. Channel on which the Seeburger AttribMapper is configured (I need to use the DCJMSCorreleationID dynamic attribute).
In the module tab, I added a new module:
Module Name Module Type Module Key
localejbs/Seeburger/AttribMapper Local Enterprise Bean map
And I added the following parameter:
Module Key Parameter Name Parameter Value
map http://sap.com/xi/XI/System/JMS/DCJMSCorreleationID "TEST"
When processing a message, I get the following error on the Communication Channel Monitoring:
Message processing failed. Cause: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of AttribMapper.
Does anyone has an idea on how to fix this problem?
Thanks for your help!
Benoit

HI,
Refer the discussion of
Setting DCJMSCorreleationID in JMS RECEIVER using Seeburger AttribMapper
Dynamic subject in AS2 receiver
Thanks
Swarup

Similar Messages

Sync/Async - JMS receiver comm. channel not processing

I have a Sync/Async scenario (without bpm) in PI 7.11:
RFC -> PI -> JMS
whereby the JMS receiver comm. channel does not fully process the message.
More specifically, the RFC sender comm. channel gets a message in and passes the message to the JMS channel, but that JMS channel within the RWB comm. channel log only shows the entry:
- Message processing started
The odd twist to this is that when we bring the PI server down, then back up again, (or wait a period of time, still trying to determine this period) the FIRST message attempt does successfully get processed, i.e. the first message on that JMS receiver comm. channel RWB log shows as:
- Channel successfully processed the message: 08499236-387c-11e0-b002-000025bab2c2
- Stored the correlation ID 08499236-387c-11e0-b002-000025bab2c2 of the request JMS message: ID:c3e2d840d4d8d4f24040404040404040c754dc12d8b54ec6 correponding to the XI message: 08499236-387c-11e0-b002-000025bab2c2
- Message processing started
(but then because of an issue on the target system, no response comes back, so then we'll additionally get the log entry:
- Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: no message received
Any suggestions appreciated on what I can check here to try and figure this out. Possibly because the first message eventually errors out, it is stopping the other subsequent msgs from getting processed...
When I check the audit logs of a 'success' msg vs. a not-successful msg, the success msg has an entry (and subsequent entries) of:
14.02.2011 12:50:19 Information Transform: transforming the payload ...
14.02.2011 12:50:19 Information Transform: successfully transformed
14.02.2011 12:50:19 Information ROB: entering RequestOnewayBean
14.02.2011 12:50:19 Information ROB: forwarding the request message
14.02.2011 12:50:19 Information ROB: leaving RequestOnewayBean
14.02.2011 12:50:19 Information JMS Message was forwarded to the JMS provider succesfully."
14.02.2011 12:50:19 Information XMB Message as Binary was forwarded to the SAP XI JMS service succesfully.
14.02.2011 12:50:19 Information WRB: entering WaitResponseBean
14.02.2011 12:50:19 Information WRB: retrieving the message for 08499236-387c-11e0-b002-000025bab2c2 ...
wheras the non-success msg shows only:
14.02.2011 12:55:30 Information Transform: transforming the payload ...
14.02.2011 12:55:30 Information Transform: successfully transformed
14.02.2011 12:55:30 Information ROB: entering RequestOnewayBean
14.02.2011 12:55:30 Information ROB: forwarding the request message
14.02.2011 12:55:30 Information ROB: leaving RequestOnewayBean
So, we can see that the message is not "forwarded to the JMS provider..." in the non-success case.
And also the sxi_monitor shows these messages with a status of "Log version".
Keith

Hi Siddhesh - yes that was a while back and am trying to remember the resolution. I have implemented sync/async bridges (as well as async/sync bridges) successfully, so I don't mind checking your settings, particularly I am interested in the settings within the Module tab of the JMS receiver. I can then compare to mine if you'd like. Also if you can let me know what underlying queuing system in that target system (e.g. MQSeries?) that would be great.
Regards,
Keith

Reconnect issue with JMS sender Communicatio channel

Hi All,
We need help for JMS sender channel.from last two days we are getting issue with JMS channels.they are looking green but not picking data from Mq ssue to this lot of messages got stuck in MQ queue and its stop writting messsages .
Problem from PI side is JMS communication channels are not showing any issue.even they do not pick data or lost connection with MQ server they are looking green. so its very difficult for PI team to find out correct Comunication channels which stop picking up the data.when we start/stop that CC its start picking data.
Do anybody face this issue.please do let us know permenent solution instead of doing start/stop when user report issue.
Thanks in advance
Best Regards
Monica Bhosale
Edited by: monica bhosale on Mar 8, 2012 8:56 AM

we are using PI 7.11 and this issue was fixed in SP06
until then one of the work around we were using was to schedule the adapter to stop and start every 3 hour or so

Erro in JMS receiver Comm Channel

Hi,
I am working on a scenario File(Sender) JMS (Receiver).The input is a text file The file sender polls this input file and the file sender CC does the content conversion and puts the XML message into the JMS Queue. But in the receiver JMS comm channel i get the error saying
Error sending message in sending to destination ABCF, the message message: TextMessage[null, <?xml version="1.0" encoding="...]: weblogic.jms.common.JMSException: Error sending mess
Please help me on this

Hi,
Please have a look at your message in SXMB_MONI and see if the payload is correct.
Also have a look at the MDT (http://<server>:<port>/MDT) and see what errors occur for your message.
Regards,
Yaghya

Issue with JMS sender Communication Channel

Hi All,
We are tying to connect to IBM WebSphere MQ system from SAP PI and pickup messages thru sender JMS adapter.
This is WebSphere MQ -> PI -> Proxy Async scenario. We deployed the required sda file in SDM. We could connect to MQ system message queue, and pick messages from PI development system.
But, when we are trying to do it from PI test system, we get the following error in Comm Channel monitoring:
Error while processing message 'b000f150-15cf-4484-24ec-d8ad10acb685'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Exception in method process.: BaseEJBException: Exception in method process. at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
The patch levels (ABAP & Java) are the same for both the PI systems.
sda file is also deployed successfully for both systems. Comm Channel config is exactly the same for both the systems.
But, still we get the above error.
We did full cache refresh, CPA cache refresh, stopped/started comm channel, restarted the adapter, java stack, and whole PI system after deployment. But, still we get the same error.
Can you please tell me if i am missing something here?
Thanks,
Chandra

Hi,
>>>MessageFilterException
my exp with this error on JMS
a) delete the channel in ID
b) recreate it and active and it works ....
at least with activemq jms
Regards,
Michal Krawczyk

Sateillite A200-1A9: Issue with sending/receiving E-mail using Windows Mail

Using Windows mail I have to close/open the programme to be able to send mails, they get stuck in the Outbox. By closing and reopening the programme the mail gets sent. Also the Blue figure 1 in brackets showning 1 unread mail in the Outbox is there all the time although there is no mails read or unread in the Outbox
Not a server problem as all mails are going/receiving fine on my desktop.
Pressing send and receive button does not help. although some of the time it will receive mails when pressing send/receive but will not send them
I do have Norton Internet security 2007 and am getting fed up with the continuing problems that this seems to cause over the period 2004-7.
Is there an issue with the Windows mail programme running with Vista that is known

I think I have found a solution
Please check this:
Windows Mail will not Send or Receive mails
http://support.toshiba-tro.de/kb0/TSB7701X30005R01.htm
It seems that the update of Software Desktop SMS to the newest version will help to sort out this problem.

Error with jms receiver communication channel

I am new to jms adapter
I am getting ERROR:"Error connection due to missing class: com.ibm.mq.jms.MQQueueConnectionFactory. Please ensure that all needed resources are present in the JMS provider library: com.sap.aii.adapter.lib.sda".
How to resolve this issue?
Please help to me
Thanks
Swathi

Hi,
Check all the jar files in aii_af_jmsproviderlib.sda
See the list of files from below link
http://help.sap.com/saphelp_nw70/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/frameset.htm
or install the drives again i suppose som of jar files are missing on PI box or not deployed correctly.
chirag

XI 3.0 File receive comm.channel using variable for folder/file name schema

Hi,
I prepared a integration message to produce .txt file output of message.
I prepared message successfully, it's running properly and producing .txt file.
My problem is to set .txt file name.
I must set file name using by some information in .txt file.
I must get some part of the first line of .txt to set filename.
I declared a variable to do it.
How can i set referance of variable?
payload:..?
Thanks.

Hi,
this blogs might be helpful:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417800%29ID0935780750DB11281184595516315205End?blog=/pub/wlg/13704
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417800%29ID0935780750DB11281184595516315205End?blog=/pub/wlg/2664
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417800%29ID0935780750DB11281184595516315205End?blog=/pub/wlg/1888
http://wiki.sdn.sap.com/wiki/display/XI/CombiningthreedifferentaspectsofPIinoneshot
Regards
Patrick

Error with JMS receiver channel

Hi,
We have a scenario in which Order response will be sent from ECC to WebLogic (JMS system) through PI.
After the restart of JMS, we are facing issues with JMS receiver channel.
Some of the responses are delivered, and for few we have the error as described below.
Also, one of the cluster node of the JMS receiver channel has the below error.
Please anybody throw some light on this.
Error description:
" Delivery of the message to the application using connection JMS_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Pending message discovered: dfff2e2b-80f5-94f1-a068-001cc4d99b3e.The channel is configured throw an recoverable, temporary error for this warning (default). Decide whether you want to bypass this message. If so, set the Pending Handling channel parameter to 'Bypass' and restart the message afterwards.. "
Thanks in advance.
Regards
Bhanu Tiruveedula.

Hello Bhanu,
we have been getting this error from long time with JMS channel but no solution except changing the configuration so that it can throw exception and move on.
we have also noticed that this happens for some time and then gets resolved automatically. so it seems to be some data which is not expectable by jms channel.
regards,
Ratna

Setting DCJMSCorreleationID in JMS RECEIVER using Seeburger AttribMapper

Hello
Has anyone managed to set the DCJMSCorreleationID dynamic attribute in a JMS RECEIVER using Seeburger AttribMapper module?
Here is how I configured the JMS_RECEIVER:
In the module tab, I added a new module:
Module Name     Module Type     Module Key
localejbs/Seeburger/AttribMapper     Local Enterprise Bean     map
And I added the following parameter:
Module Key     Parameter Name                                                       Parameter Value
map                     http://sap.com/xi/XI/System/JMS/DCJMSCorreleationID "TEST"
When I process a message, I can see in the adapter engine Audit log the following lines:
SEEBURGER/AttribMapper: Setting dynamic property http://sap.com/xi/XI/System/JMS - DCJMSCorreleationID = TEST
SEEBURGER/AttribMapper: Finished succesfully, 1 properties set or deleted
However looking at the Message Content/SOAP Document, I can see no dynamicConfiguration (it should be the case according to Seeburger documentation).
If I check the message properties on the JMS queue, I can see the correlation ID is not set to TEST.
Any idea?
Thanks in advance!
Greg

Are you using the AttribMapper in the Sender or in the Receiver Channel ? Please be aware that you will not be able to see the change of attribmapper in the message content in receiver channels (they are not updated/persisted there).

Error in receiver comm channel

Hi All,
   I am working on scenario file to file with out IR.just picking up the file from sap app server and placing in target ftp server.
My sender comm channel is picking the file fine but when in receiver comm channel i am getiing error as
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Unknown payload format 0 in message"
"Attempt to process file failed with Unknown payload format 0 in message"
i have checked in content of the file it contains no special character. are any security is being maintained.
please advise on this.
Thanks,
Bhaskar

Hi Jude,
I have checked in sender comm channel in message display tool under message content i am getting error as below.
messagecontent
message part [soap document]
500   Internal Server Error
SAP J2EE Engine/6.40
Application error occurred during request processing.
Details:   Error [javax.servlet.ServletException: null], with root cause [java.lang.NullPointerException: null].
Exception id: [00145E474044003F000018AD00003E0D000471A1CBF6A02A]
what would be the error and how can i find it.
Is this basis related issue?
Thanks,
Bhaskar

Sync/Async communication with JMS Receiver

Hi all,
I am working on one Sync/Async model without BPM. Sender is RFC which is expecting some response, but we know receiver jms doesnt support response message directly. For this i used modules provided by SAP.
While developing interface i used below objects.
One Outbound Synchronous interface--> for Sender RFC channel
Inbound Synchronous Interface----->for Receiver JMS Channel
outbound asynchronous interface--->for Sender JMS channel
one request mapping and one response mapping
Operational mapping between outbound Synchronous to inbound synchronous.
ID Objects:
2 sender agreements: one with sender jms channel
one with sender rfc channel
1 receiver agreement: with jms receiver channel
1 receiver determination
1 interface determination
In receiver jms and sender jms channels i used modules as specified in the document http://help.sap.com/saphelp_nw04/helpdata/EN/45/20d2b4c20a0732e10000000a155369/content.htm
But my interface is not working end to end successfully.
Please confirm below points
1)do i need to have other external application put response message to response queue or will the MQ automatically generates the response message and put into response queue
2)In receiver jms channel is it ok if i will put response queue(Q2) name in the field JMS ReplyTo Queue Name or do i need to put in the form queue://<ReplyToQMgr>/<ReplyToQ>
3). what is the format of data type for asynchronous outbound interface which i used for sender agreement of jms sender channel.
4). Do i need to do any other special settings at MQ settings in MQ server.
Note: i am using PI7.1 and i selected the option JMS-compliant for target client in jms channels.
Thanks,
Madhu
Edited by: Madhusudana Reddy on Nov 4, 2009 9:38 AM

1)do i need to have other external application put response message to response queue or will the MQ automatically generates the response message and put into response queue
The following information is available in SAP note-
Message correlation implies correlating a response message with a request message. With respect to the JMS adapter, this means that you sent have sent a message through a JMS receiver channel to some JMS queue (say queueA) , some external application processes this message and puts the response onto another JMS queue(say queueB) which is then picked up by a JMS sender channel. You need to relate this response message with the original request message.
In the simple case, for all JMS compliant providers this can be done in a straightforward manner:
a) In the JMS receiver channel configuration, set the JMSCorrelationID to the XIMessageID. (or some other XI header which is applicable)
b) Ensure that your external application does not change the value of the JMSCorrelation
c) In the JMS sender channel configuration, set the XIConversationID to the JMSCorrelationID
d) The XIConversationID header of the response XI message now contains the XIMessageID of the request XI message.
For some providers such as Websphere MQ in legacy/native mode this is not so straightforward.
Do i need to do any other special settings at MQ settings in MQ server.
If your using Websphere MQ, refer que#4 in sap note :1086303
Edited by: nagarjuna _s on Nov 4, 2009 11:02 AM

PI 7.3 receiver AAE idoc scenario-No receiver comm channel found in ICO

Hi,
I am working in PI 7.3 receiver AAE idoc scenario.When I try to configure Integrated Configuration(ICO),I am not able to see the receiver comm channel in receiver agreement.
What is the reason for this??I have configured the communication channel,but still its not shown in reciver agreement dropdown.
Please help.
Regards,
Sriparna

Hi Sriparna,
In PI 7.3 there is are two separate IDoc adapters: "standard" IDoc adapter and one that is dedicated for AAE (ICO). Make sure that you have used the right one - most probably not, which is why you cannot see the channel in the dropdown list.
Hope this helps,
Grzegorz

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

Wifi: my Cell phone will remember 10 wifi connections. So delete any you don't use often and your home wifi and try to enter home wifi again.
if it still won't connect to home wifi, call your internet provider for help. You may need a newer router or different settings Or upgraded service. Your phone seeks the best connection and will refuse lesser connections.
last resort. Backup the phone. Do a full reset, then restore as new with the backup.
if still not fixed, go back to apple and insist on repair or replacement.
HOWEVER. voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

Creating SOAP Receiver comm.channel for axis web service

Hi,
I created Soap Receiver comm. channel fro Axis web service like below:
*Target URL* : http://<IP>:<Port>/<x>/service
*User:* <user>
*Password :* <password>
*SOAP Action:* <target namespace>/method
when i drive PI Message that use Soap Receiver it get error below
I do same method for .Net web service, it runs properly.
How can i solve this problem?
Error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did all but nothing changed?
I have doubt about axis side. Because respose like below.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
May be Soap Receiver setting for axis web service must be different.
Thanks.

Issue with JMS Receiver Comm. Channel using Seeburger AttribMapper

Similar Messages

Maybe you are looking for