Issue with Package ??

hello
experts
i have to face a evalutaion .
there i have to do a screen programming where there i will save data in a ztable but when i will save data then it will ask for a package and a requset number as like it ask when we create a report by se38 .
Please HELP.

> but when i will save data then it will ask for a package and a requset number as like it ask when we
> create a report by se38
When you are maintaing the data through Tablemaintenance then
you check this Radio button : in the Screen area Dialog Data Transport Details
Recording Routine:
no or user or recording Routine

Similar Messages

Issue with Packaged Jars added to project from resource Palette

Hello!
I am using Jdeveloper 11.1.2.2.
I started this post thinking there was an issue having to do with packaging jars that refer to other libraries (see post Are Libraries Required?
Now I realize it is a different issue (although that other post is relevant).
Issue: I create a package -- a template in this case.
I deploy it in my file system and then load it into the resource palette as a file system connection.
I create a new application. From the resource palette, I add the jar to the view controller project, and am able to use the template in jsf files. No problem. Runs fine.
then I load the application into subversion or I move the whole application to another directory on my computer.
When I open the moved application (or do a checkout from subversion), I open the jsf that contains a reference to the jar, the design view is completely blank. Going to the source, I see my original code, but there are red signals in the upper-right signifying an error.
If I run the application without fixing it, I get an error saying the template cant be found, Also, when I deployed to a standalone weblogic server, I get the same error (see the post above for this error).
I open the project properties. The ADF Library is in the "Libraries and Classpath" and pressing edit, I can see the correct reference to the path of the jar.
To make the application work, I have to remove the ADF Library (or at least the reference when pressing edit) and then from the resource palette, add it again to the project.
IS THIS NORMAL? Am I doing something wrong with the initial packaging of the jar? Should I change some setting somewhere?
How am I supposed to deploy to weblogic?
The other posting shows an error output if I try to run the application before fixing the jar reference. I got the same darn error when deploying to weblogic.
Would appreciate any help!
Stuart
Edited by: Stuart Fleming on Nov 18, 2012 4:45 AM

Timo,
thank you for your reply. I actually created a youtube video on this, available here: http://youtu.be/ERyLngq9hlI
Since the video might be a little tedious to view, Here are the details. You can jump to the exciting parts of the video, if you want:
Here is what I did:
1. I cleaned out my system directory and the temp directory on my computer.
2. Opened the application containing my template. Deleted the existing jar file.
3. Started taking video....
4. (From 40 seconds into the video) Created the jar file again.
5. (2:55 minuts into video) Closed template applcation and Created new fusion application.
6. (4 minutes into the video) Created model
7. (4:15 minutes into video) in view controller added template, created a jsf page.
8. (5 minutes into the video) Created Security and users.
9. (6:30 minutes into the video) Created a task flow, with jsff in it, with a form on the jsff. Assigned Security to objects.
*10. (7 minutes into the video). Ran JSF successfully.*
11. (7:40 minutes into the video). Closed application. Copied the entire application into two directories.
12. (8 minutes into video) Opened the first copied video. You can see that the jsf page is not accessing the template. Reviewed the View Controller project Libraries and classpath. Removed the library, re-added the jar from the resource palette. Worked fine.
13. (9:30 minutes into video). Opened the 2nd copy of the file I intend for subversion. Showed the jsf page and the error it displays when open (same as in first copied application).
Load application into subversion.
14. (10 minutes into video). Check out application
15. (10:15 minutes into video). Open JSF file. The reference to the template jar file is reading properly.
16. (11 minutes into video). Load the original working copy into subversion.
17. (11:30 minutes into video). Check out from subverion, but the check out failed.
18. (12 minutes into video). Check out, and look at the jsf. The page shows fine.
Timo, I think this might be reported as a bug. You ought to be able to move files around on your computer. Also, the first time I checked the application out from subversion, the jsf page did not read the template.
ALSO, when I tried to deploy the application (that contained the reference to the template jar file to weblogic), I got the same error when I ran the jsf
first lines of that error:
Error 500--Internal Server Error
java.io.FileNotFoundException: /WEB-INF/ssfTemplate/SSFTemplate.jsf Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:224)
Thank you for your time and commitment!
Stuart
Edited by: Stuart Fleming on Nov 18, 2012 10:13 AM

Issue with package being distributed to DP

Hi,
We’re having an issue with a particular DP on trying to re-distribute a driver package to. The driver package was updated and re-distributed to around 80 DP’s. The package had been successfully sent to all except one.
I have tried re-distributing packages to this DP and this failure and other packages work fine, so the issue lies with this particular package on this particular DP.
I have run through the steps within this post but still no joy:
https://social.technet.microsoft.com/Forums/en-US/8328f9ce-d290-4aba-8187-670080464476/sccm-2012-how-to-delete-packages-from-wmi
I have made sure the package doesn’t exist on the DP by taking it out of root\sccmdp within WMI and also removing the ini file from the PkgLib folder, as per above post. But on trying to distribute to the DP via the admin console I get Error: The SMS Provider
reported an error.
There are no other details for the error and looking through various logs so no further indication for the error.
Interestingly the package is being reported by the admin console as not being on the DP, so re-distribution is not an option. I can only use the distribute content option, even though it had been on this DP. This error is reported at the end of the distribute
content wizard.
Also we tried using content explorer from the Config Manager toolkit before running through the above postl, and the package was shown within content explorer but it was greyed out. The options to validate where also greyed out. On running the above removal
the package was no longer displayed within content explorer. But running through distribute content via the admin console still shows the same error message.
We then tried pre-staging the content manually on the DP. On using content explorer after this it still shows the package as greyed out.
An overnight validation doesn’t report any errors for package content either.
Another curious note is on running smsdpmon manually on the DP for the package, it reports the package as being successfully verified within the smsdpmon.log. This message is also reported back to the MP and can be seen within the Status Message Viewer.
But this message is not displayed within Monitoring -> Distribution Point Configuration Status.
We tried quite a few avenues but still no joy with this package. Could any offer any suggestions to help fix this issue?
Thanks
James

It was originally but the driver package needed to be updated. Once updated the package was re-distributed to all sites, but failed on one out of 80. All DP's are more or less configured the same, with the same AV protection.
The problem DP takes other packages OK. SO the thought was to try to remove the existance of the package from the problem DP. This is where we are now. Hope that is a bit clearer?

Connection pool issue with packaged application

we are using 9.2 mp1 for a Oarcle packaged application which is talking to Oracle RAC. In production one
of the RAC nodes went down and we see that the wbelogic connection pool is never able to reconnect
This is a packaged application Bharosa which internally uses hibernate and in turn relies on weblogic connection pool
See a few stuck threads in the logs indicating some prolem with the connection cleanup
<Dec 16, 2008 12:11:03 PM PST> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "626" seconds working on the request "Http Request: /fahost/econnect/IntegratedAuthRemoteServlet.svl;JSPSESSIONID=82W2JLLJ8vCB25G3jyc6cYdXVXLYc1G1GwTt91plpCpB9MY6yQP3!468271380!-864027599!1229457609639", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
     weblogic.common.resourcepool.ResourcePoolImpl.releaseResource(ResourcePoolImpl.java:521)
     weblogic.jdbc.common.internal.ConnectionPool.release(ConnectionPool.java:669)
     weblogic.jdbc.common.internal.ConnectionPoolManager.release(ConnectionPoolManager.java:113)
     weblogic.jdbc.wrapper.PoolConnection.doClose(PoolConnection.java:192)
     weblogic.jdbc.wrapper.PoolConnection.close(PoolConnection.java:117)
     org.hibernate.connection.DatasourceConnectionProvider.closeConnection(DatasourceConnectionProvider.java:74)
     org.hibernate.jdbc.ConnectionManager.closeConnection(ConnectionManager.java:388)
     org.hibernate.jdbc.ConnectionManager.aggressiveRelease(ConnectionManager.java:343)
     org.hibernate.jdbc.ConnectionManager.afterTransaction(ConnectionManager.java:230)
     org.hibernate.jdbc.JDBCContext.afterTransactionCompletion(JDBCContext.java:201)
     org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:127)
     com.bharosa.common.hibernate.HiberDBMgr.commitTransaction(HiberDBMgr.java:293)
     com.bharosa.common.db.BharosaDBMgr.endSession(BharosaDBMgr.java:243)
     com.bharosa.common.hibernate.HiberBaseDAO.executeQuery(HiberBaseDAO.java:596)
     com.bharosa.common.hibernate.HiberBaseDAO.executeDBQuery(HiberBaseDAO.java:543)
     com.bharosa.common.hibernate.HiberDBMgr.executeDBQuery(HiberDBMgr.java:351)
     com.bharosa.vcrypt.dataaccess.impl.VCryptUserDataAccessImpl.getVCryptUserByLoginId(VCryptUserDataAccessImpl.java:520)
     com.bharosa.vcrypt.auth.impl.VCryptAuthImpl.getUserByLoginId(VCryptAuthImpl.java:274)
     com.bharosa.client.BharosaHelper.getUser(BharosaHelper.java:116)
     com.bharosa.client.BharosaHelper.createPersonalizedAuthentiPad(BharosaHelper.java:308)
     com.svb.ib.security.web.loginauthserver.IntegratedAuthDelegateSkeleton.getAuthpadHTML(IntegratedAuthDelegateSkeleton.java:672)
     com.svb.ib.security.web.loginauthserver.IntegratedAuthDelegateSkeleton.createAuthPad(IntegratedAuthDelegateSkeleton.java:113)
     com.svb.ib.security.web.loginauthserver.IntegratedAuthDelegateSkeleton.createAuthPad(IntegratedAuthDelegateSkeleton.java:103)
     com.svb.ib.security.web.loginauthserver.IntegratedAuthRemoteServlet.invokeService(IntegratedAuthRemoteServlet.java:60)
     com.svb.ib.security.web.loginauthserver.IntegratedAuthRemoteServlet.doPost(IntegratedAuthRemoteServlet.java:40)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223)
     weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3245)
     weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2003)
     weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1909)
     weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
     weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
<Dec 16, 2008 12:11:03 PM PST> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "616" seconds working on the request "weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl@ba063", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
     weblogic.common.resourcepool.ResourcePoolImpl.getCurrCapacity(ResourcePoolImpl.java:671)
     weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:1922)
     weblogic.timers.internal.TimerImpl.run(TimerImpl.java:265)
     weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
<Dec 16, 2008 12:11:03 PM PST> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "635" seconds working on the request "Http Request: /fahost/econnect/IntegratedAuthRemoteServlet.svl;JSPSESSIONID=Q3C6JLLV1lwjqmTWLQ4m5M02BqBKmQzcyt66wY925kykg2pQyB1t!1872529297!468271380!1229457621681", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
     java.net.SocketInputStream.socketRead0(Native Method)
     java.net.SocketInputStream.read(SocketInputStream.java:129)
     oracle.net.ns.Packet.receive(Unknown Source)
     oracle.net.ns.DataPacket.receive(Unknown Source)
     oracle.net.ns.NetInputStream.getNextPacket(Unknown Source)
     oracle.net.ns.NetInputStream.read(Unknown Source)
     oracle.net.ns.NetInputStream.read(Unknown Source)
     oracle.net.ns.NetInputStream.read(Unknown Source)
     oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1099)
     oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1070)
     oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:478)
     oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:216)
     oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:955)
     oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10622)
     weblogic.jdbc.wrapper.PreparedStatement.executeBatch(PreparedStatement.java:157)
     org.hibernate.jdbc.BatchingBatcher.doExecuteBatch(BatchingBatcher.java:58)
     org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:195)
     org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:230)
     org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:141)
     org.hibernate.event.def.AbstractFlushingEventListener.performExecutions(AbstractFlushingEventListener.java:296)
     org.hibernate.event.def.DefaultFlushEventListener.onFlush(DefaultFlushEventListener.java:27)
     org.hibernate.impl.SessionImpl.flush(SessionImpl.java:1009)
     org.hibernate.impl.SessionImpl.managedFlush(SessionImpl.java:356)
     org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:106)
     com.bharosa.common.hibernate.HiberDBMgr.commitTransaction(HiberDBMgr.java:293)
     com.bharosa.common.db.BharosaDBMgr.endSession(BharosaDBMgr.java:243)
     com.bharosa.common.dataaccess.DataAccessMgr.endSession(DataAccessMgr.java:132)
     com.bharosa.vcrypt.tracker.impl.VCryptTrackerImpl.updateLog(VCryptTrackerImpl.java:1048)
     com.bharosa.vcrypt.tracker.impl.VCryptTrackerImpl.updateLog(VCryptTrackerImpl.java:622)
     com.bharosa.client.BharosaHelper.fingerPrintFlash(BharosaHelper.java:203)
     com.bharosa.client.BharosaHelper.fingerPrintBrowser(BharosaHelper.java:155)
     com.svb.ib.security.web.loginauthserver.IntegratedAuthDelegateSkeleton.runPreAuthRules(IntegratedAuthDelegateSkeleton.java:239)
     com.svb.ib.security.web.loginauthserver.IntegratedAuthDelegateSkeleton.runPreAuthRules(IntegratedAuthDelegateSkeleton.java:214)
     com.svb.ib.security.web.loginauthserver.IntegratedAuthRemoteServlet.invokeService(IntegratedAuthRemoteServlet.java:83)
     com.svb.ib.security.web.loginauthserver.IntegratedAuthRemoteServlet.doPost(IntegratedAuthRemoteServlet.java:40)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223)
     weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3245)
     weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2003)
     weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1909)
     weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
     weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>

Hi. Something is seriously ill there. I would ask that you post a full thread dump
to see what's locking what. You may need an official support case...

Issue with package Sharing

The issue is i have created package in central and given the share path in "Data Access" inorder to distribute to primary and country office servers.
In "Data Access" share the distribution folder is enabled but the package is not available in share path. what might be the issue.
Yamini

did you look at package status ? is it succeeded ? what does log distmgr.log says ?
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

Issue with Dataflow Task in SSIS Package

Hello Everyone,
I have recently created an SSIS package to Load data from Flat file to SQL Server Table, it was working fine. Now I have bought a new laptop and copied the projects into this new system and changed all the connection managers(Flat files) accordingly.
Problem is, when I previously ran the package(With File1) in old laptop and check the distinct count on a table it was perfect, but when I ran the same package with same File on New Laptop, the Distinct count gives me an issue with particular record.
Eg: Distinct Count with old laptop Run , 10,20,100
Distinct Count with old New Run , 10,20,100 , 100
There is a Space being generated for a particular record, when I run the package on new laptop with same File as old one.
Any suggestions on this, I could not exactly figured out the Issue.
Please Help.
Thanks
Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.

You need to tell the responders here how exactly to reproduce your issue and provide the file.
I do not know how the "distinct count" works.
Seems to me it appears to be a database issue not SSIS.
Arthur
MyBlog
Twitter
When I perform the above query on old laptop, this gives me a result set of
10
20
100
When I perform the Same query on New laptop, this gives me a result set of
10
20
100
'100 ' (No Quotes please see the spaces generated)
Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.
Can you give us an idea of tasks you're having after the file source?
Particulary see steps where you are doing some data manipulations.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page
I am using simple Flatfile source and oledb destination in here. this is causing issue, all the other tasks after this are loading perfectly except this.
Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.

Issues with Custom Package in Lightroom 3...please help

I am having issues with the custom package in lightroom 3. I am selecting diferent cell sizes (with different aspect ratios) and placing multiple images in these cells.
On screen everything looks good, but when it actually prints some of these cells are coming out stretched!! For example, the 6x4 cell comes out fine (same aspect ratio as the original capture), but i have 2 x 1.5 inch cell whose image comes out stretched??
The first thing I thought of was the "zoom to fit" option, but this is not present in picture package.
Then I thought it perhaps it was something to do with the my print settins, but cannot find anything there.

I am having the same issue. I used a Matt Kloskowski print grid and when I printed it, or printed to file, some of the images in the 15 that were created in the template were distorted. Some the faces became wider and some narrower. Not just zoomed to fit. On screen it all looks correct. Many others on the forum where the template was posted don't seem to have this issue. I created a template myself just in case that was it but I got the same problem as walenahs. I tried to figure out what he had done but I didn't get it.
I have attached the two images. You can see the distortion in the second image on the top row (too narrow), and on the second row, the second in and second down, black and white (too wide).
Thanks

Solution Manager Enhancement Package 1 issue with SAINT

Short Text
Solution Manager Enhancement Package 1 issue with SAINT
Long Text
Hi,
We are trying to install the SAP Solution Manager Enhancement Package 1
using SAINT. We have encountered an issue while trying to use the Stack
Configuration option withing SAINT.
Issue 1: A message appears saying OCS Package SAPK-701DHINSAPBASIS does
not match current software component vector" . Whats does that mean and
how do we resolve this issue?
Issue 2: Ignoring the above message and going forward, we see the
import condition page where it fails saying BBCPRM component must not
be installed in this system
Please check the attahed screen shots for the current Software
Component levels and the errors.
Please help to resolve the above issue and explain if we are missing
anything here.
Thanks,
Nag Koppuravuri

For the errors like ...
"OCS Package <Package Name> does not match current software component vector" will usually appears when the upgrade is not matching the "MINIMUM support package level"
Check note 1182336 - Though this note is not for the support package you are applying but the error points to same direction.
To solve your problem...
Please check the "Update Guide SAP Solution Manager 7.0 EHP 1 " available on Market place.
Go to Service Market place -> Release & Upgrade Info -> Installation and Upgrade Guide
To your left dropdown SAP Components -> Solution Manager -> Release 7.0 EHP 1 and on the right panel check above document Section "Preparations"
If you satisfy those conditions I think you should be able to apply EHP1 smoothly.
Lets us know if anything...
Cheers!

Issue with ESS/MSS Business package 1.41

Hi All
I had an issue with ESS/MSS recently we deployed Business package 1.41 it contains HCM Forms and Process also,
and we assigned the standard Manager-self-service role & Employee-self-service-role to test user but when the user is trying to access the standard application he is getting Portal runtime error.
   Is there any configuration is need from HRFunctional side and Basis side
if any body have an idea please let me know ASAP.
For every MSS standard applications like :work overview ,Recruiting,Team,Talent Management,Budjet,Projects,Planning ,Organization, leave
I am getting like below error.
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 02:17_13/04/11_0031_116801250
Refer to the log file for details about this exception.
Thanks
Renu.

Hi All
    Here I am giving logs detail I got two logs so giving both logs , can anybody help on this issue , if any configuration need please suggest.
Full Message Text
03:19_13/04/11_0045_116801250
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
System:    &#39;SAP_LocalSystem&#39;,
Attribute: &#39;client&#39;.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Next One
Full Message Text
Exception ID:03:19_13/04/11_0045_116801250
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.roles/com.sap.pct.erp.mss.manager_self_service/com.sap.pct.erp.mss.manager/overview/com.sap.pct.erp.mss.work_overview/com.sap.pct.erp.mss.workoverview/com.sap.pct.erp.common.key_figure_monitor
Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
User : P00000531
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
System:    &#39;SAP_LocalSystem&#39;,
Attribute: &#39;client&#39;.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
... 29 more

Content distribution issue with message "Found package properties updated notification for package '00000123'"

I've got strange issue with 1 of my primary sites that started just recently. I've updated the content of 1 package and this now needs re-distribution to all DPs. I've got 3 primary sites and on 2 of those the update succeeded and my DP's got
updated correctly. One primary site it does not work and checking distrmgr.log I can see following message every xx minutes
Found package properties updated notification for package '000008B7' SMS_DISTRIBUTION_MANAGER 6/21/2014 12:00:31 AM 5836 (0x16CC) ==>
Checking Pkgxfermgr.log does not show anything either, I've tried with 2nd application but again the same result it only shows the the notification message.
I saw similar issue yesterday but with restart of the sms_exec service it eventually distributed the content, obviously this is not something I like to do too often.
does anyone have idea what this could be, suggestions are welcome. Thx.

Jason, I've checked the flow from the CAS down to the primary below is quick overview. The package I'm testing is just small package that we use to check replication is working in our environment it's less then 1MB in size and we run it
1/week basically update content and then check monitoring-content distribution that it has been received on our 260 DP's around the globe
CAS (Located in the US EST Time zone)
Distrmgr.log 11:25am update package and needs to be send to 3x primary sites (A00; B00; C00)
sender.log 11:30am all 3 primary sites have received the content.
C00 (Primary site in Singapore having the issue)
distrmgr.log 11:27pm received notification of the package
despool.log 11:32pm packaged content extracted successfully
distrmg.log started to see message Found notification for package '000008B7' and followed by next message
Package '000008B7' (priority 2) is already in queue.
This goes one until 1:21am (Singapore time)
Start updating the package 000008B7... SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
The Package Action is 1, the Update Mask is 160 and UpdateMaskEx is 0. SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
Use drive G for storing the compressed package. SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
Successfully created/updated the package 000008B7 SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
STATMSG: ID=2311 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SG-INTRA100.na.pg.com SITE=C00 PID=10132 TID=8296 GMTDATE=Fri Jun 20 17:21:45.848 2014 ISTR0="000008B7" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="000008B7"
After that nothing anymore.
When I check monitoring - content distribution I can see the package being updated/distributed to 80% of my DP's and last 20% are the dp connected below this Primary site.
To add to the confusion, there was another package distributed around the same time, and then one actually made it to the remote DP's.
This is first time I see this issue.

Issues with Creative Cloud for teams deployment workflow

The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
[Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
It can be installed from command line by:
Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe Systems

Hi Boncker,
I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
Please do let us know if that worked for you or not .
Cheers,
Kartikay Sharma

Issue with xsd Data type mapping for collection of user defined data type

Hi,
I am facing a issue with wsdl for xsd mapping for collection of user defined data type.
Here is the code snippet.
sample.java
@WebMethod
public QueryPageOutput AccountQue(QueryPageInput qpInput)
public class QueryPageInput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class QueryPageOutput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class Account_IO implements Serializable, Cloneable {
protected ArrayList <AccountIC> fintObjInst = null;
public ArrayList<AccountIC>getfintObjInst()
return (ArrayList<AccountIC>)fintObjInst.clone();
public void setfintObjInst(AccountIC val)
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
Public class AccountIC
protected String Name;
protected String Desc;
public String getName()
return Name;
public void setName(String name)
Name = name;
For the sample.java code, the wsdl generated is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions
name="SimpleService"
targetNamespace="http://example.org"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<wsdl:types>
<xs:schema version="1.0" targetNamespace="http://examples.org" xmlns:ns1="http://example.org/types"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://example.org/types"/>
<xs:element name="AccountWSService" type="ns1:accountEMRIO"/>
</xs:schema>
<xs:schema version="1.0" targetNamespace="http://example.org/types" xmlns:ns1="http://examples.org"
xmlns:tns="http://example.org/types" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://examples.org"/>
<xs:complexType name="queryPageOutput">
<xs:sequence>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="xs:anyType" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="queryPageInput">
<xs:sequence>
<xs:element name="fPageSize" type="xs:string" minOccurs="0"/>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
<xs:element name="fStartRowNum" type="xs:string" minOccurs="0"/>
<xs:element name="fViewMode" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org" xmlns:ns1="http://example.org/types">
<import namespace="http://example.org/types"/>
<xsd:complexType name="AccountQue">
<xsd:sequence>
<xsd:element name="arg0" type="ns1:queryPageInput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQue" type="tns:AccountQue"/>
<xsd:complexType name="AccountQueResponse">
<xsd:sequence>
<xsd:element name="return" type="ns1:queryPageOutput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQueResponse" type="tns:AccountQueResponse"/>
</schema>
</wsdl:types>
<wsdl:message name="AccountQueInput">
<wsdl:part name="parameters" element="tns:AccountQue"/>
</wsdl:message>
<wsdl:message name="AccountQueOutput">
<wsdl:part name="parameters" element="tns:AccountQueResponse"/>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="AccountQue">
<wsdl:input message="tns:AccountQueInput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
<wsdl:output message="tns:AccountQueOutput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSoapHttp" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="AccountQue">
<soap:operation soapAction=""/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServicePort" binding="tns:SimpleServiceSoapHttp">
<soap:address location="http://localhost:7101/WS-Project1-context-root/SimpleServicePort"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the above wsdl the collection of fintObjInst if of type xs:anytype. From the wsdl, I do not see the xsd mapping for AccountIC which includes Name and Desc. Due to which, when invoking the web service from a different client like c#(by creating proxy business service), I am unable to set the parameters for AccountIC. I am using JAX-WS stack and WLS 10.3. I have already looked at blog http://weblogs.java.net/blog/kohlert/archive/2006/10/jaxws_and_type.html but unable to solve this issue. However, at run time using a tool like SoapUI, when this wsdl is imported, I am able to see all the params related to AccountIC class.
Can some one help me with this.
Thanks,
Sudha.

Did you try adding the the XmlSeeAlso annotation to the webservice
@XmlSeeAlso({<package.name>.AccountIC.class})
This will add the schema for the data type (AccountIC) to the WSDL.
Hope this helps.
-Ajay

Issue with DataApp Sample in JavaFX.

Okay so I downloaded the Samples pack here http://jdk8.java.net/download.html or here http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html at the bottom.
Inside is one called DataApp which requires setting up an SQL DB, and connecting to it.
In Netbeans8 I get an error about not having RestLib api inside the DataAppClient which according to the setup DataAppClient - The JavaFX 2.0 client application. inside there you can see a package with packages that wont import such as
import com.sun.jersey.api.client.Client;
import com.sun.jersey.api.client.UniformInterfaceException;
import com.sun.jersey.api.client.WebResource;
import com.sun.jersey.api.json.JSONConfiguration;
So why am I in a Java 8 samples pack needing FX 2? Though I'm not sure if it's FX8 yet, I just didn't think the 2.0 client would work.
So I tried Netbeans 7.3 to see if it would work. At first the DataAppClient was fine, but I see the DataAppPreloader will not run because it uses Package javafx.something which apparently is new in Java 8.....
So now I'm stuck, wondering why Restlib doesn't exist... I looked it up, and it says it's used for Web services, but I don't have it, nor does it say to install it in the readme.
not existing, which I guess has to do with the RestLib?
Anyone have any ideas?
EDIT: So I just downloaded the version for FX2, and I am still getting the same error when I run it, though nothing shows "errors" in the packages. Maybe I just needed to run it correctly for it to work, so not what is this error tellingme
Creating "dataapp" user and "APP" database...
Executing commands
Failed to execute: INSERT INTO user VALUES ('localhost','dataapp','*B974A83D18BB105D0C9186756F485406E6E6039B','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','','','','',0,0,0,0,'',NULL)
C:\Users\Konrad\Downloads\javafx_samples-2_2_7-windows\javafx-samples-2.2.7\src\DataApp\DataAppLoader\build.xml:84:
java.sql.SQLException: Column count doesn't match value count at row 1
     at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1073)
     at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3609)
     at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3541)
     at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:2002)
     at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2163)
     at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2618)
     at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2568)
     at com.mysql.jdbc.StatementImpl.execute(StatementImpl.java:842)
     at com.mysql.jdbc.StatementImpl.execute(StatementImpl.java:681)
     at org.apache.tools.ant.taskdefs.SQLExec.execSQL(SQLExec.java:775)
     at org.apache.tools.ant.taskdefs.SQLExec.runStatements(SQLExec.java:745)
     at org.apache.tools.ant.taskdefs.SQLExec$Transaction.runTransaction(SQLExec.java:1043)
     at org.apache.tools.ant.taskdefs.SQLExec$Transaction.access$000(SQLExec.java:985)
     at org.apache.tools.ant.taskdefs.SQLExec.execute(SQLExec.java:653)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
     at sun.reflect.GeneratedMethodAccessor75.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:601)
     at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
     at org.apache.tools.ant.Task.perform(Task.java:348)
     at org.apache.tools.ant.Target.execute(Target.java:392)
     at org.apache.tools.ant.Target.performTasks(Target.java:413)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
     at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:283)
     at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:541)
     at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:153)
BUILD FAILED (total time: 6 seconds)I have put the 1.18 derby file into glassfish, download and set up MySQL using a netbeans reference,I had set my root password and such as well.
The only thing I haven't done is created a DB, but I don't think I need one, and the instructions don't say anything.
I have Netbenans 7.3, 8, and Java vers 7_15 and 8 build 82.
GlassFish 3.1.2 as well as 4.0 build 76 which I haven't installed.
I hav e MySQL 5.6
Java FX 2.0 and 8 build 82.
The instructions are
DataApp Installation Guide
Table of Contents
Prerequisites
Setting Up the DataApp Sample
Running the Sample
NetBeans Projects for the Sample
Licensing
Prerequisites
You must have the following software installed to run the DataApp sample:
Java SDK 1.6.0_24 or later
Available at http://www.oracle.com/technetwork/java/javase/downloads/index.html.
JavaFX 2.0 SDK or later
Available at http://javafx.com/downloads/all.jsp.
MySQL 5.5 or later
Available at http://dev.mysql.com/downloads/.
You need to know the root password for your installation.
Netbeans 7.1 with Java EE and GlassFish 3.1.1 or later
Available at http://netbeans.org/downloads/.
Run the NetBeans installer to install NetBeans and GlassFish to the default locations.
Setting Up the DataApp Sample
Install the MySQL drivers into GlassFish.
Manually copy the mysql-connector-java-5.1.13-bin.jar file from the netbeans-install-dir\ide\modules\ext\ to the glassfish-install-dir/glassfish/lib directory, where netbeans-install-dir and glassfish-install-dir are the directories into which the products were installed. For example, on Windows the install directory for products is typically in the C:\Program Files\ or C:\Program Files (x86)\ directories.
Open the following DataApp projects in NetBeans by selecting File ->Open Project and navigating to the location of the DataApp sample:
DataAppClient
DataAppLibrary
DataAppLoader
DataAppPreloader
DataAppServer
Configure and create the database (only needs to be done once):
In NetBeans, right-click the DataAppLoader project.
Select Run.
Enter your MySQL root password when prompted.
Wait until you see the message that the build has successfully finished, which takes approximately 5 to 15 minutes.
Running the Sample
Start the server:
In NetBeans, right-click the DataAppServer project.
Select Run.
Wait until a browser window opens that says: YOU ARE DONE!
(Optional) Start the standalone client:
In NetBeans, right-click the DataAppClient project.
Select Run.
NetBeans Projects for the Sample
DataAppLibrary - Contains the following data:
Database tables
ORM model to database tables
DataAppLoader - Application that is run once to perform the following tasks:
Creates the database.
Loads all of the static data for the data app.
Creates some historical data.
DataAppServer - Web server that performs the following tasks:
Simulates auto sales and persists them to the database.
Provides access to the database through web services.
DataAppClient - The JavaFX 2.0 client application.
Licensing
The license for the DataAppLoader/zip_code_inserts.sql file is the Creative Commons Attribution-ShareAlike license, which is available at http://creativecommons.org/licenses/by-sa/2.0/.
The license for all other files is the BSD style license:
* Copyright (c) 2008, 2011 Oracle and/or its affiliates.
* All rights reserved. Use is subject to license terms.
* This file is available and licensed under the following license:
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
* - Neither the name of Oracle Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright © 2011, Oracle and/or its affiliates. All rights reservedEdited by: KonradZuse on Mar 27, 2013 9:39 AM
Edited by: KonradZuse on Mar 27, 2013 9:51 AM
Edited by: KonradZuse on Mar 27, 2013 9:58 AM

I found the same issue but resolved it by myself. The user table of the MySQL changed, my guess. You need to add another 'Y' or 'N' to the end of this statement in the build.xml of DataAppLoader:
INSERT INTO user VALUES ('localhost','dataapp','*B974A83D18BB105D0C9186756F485406E6E6039B','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','','','','',0,0,0,0,'',NULL,'N');
The original one is like this:
INSERT INTO user VALUES ('localhost','dataapp','*B974A83D18BB105D0C9186756F485406E6E6039B','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','','','','',0,0,0,0,'',NULL);
The new column added is password_expired. Y or N to indicate the password is good or not.

Issue with LPCOR on CME 10.5

Dear All,
I am facing issues with LPCOR configuration on CME 10.5. For International calls the Authentication Prompts triggers some times and some times doen not.
Also when a local call is dialed the Authentication Prompt is triggered some times.Below is the config and debug logs. Need your help to resolve this.
voice lpcor enable
voice lpcor custom
group 10 endusers
group 11 pstn
voice lpcor policy endusers
service fac
accept endusers fac
accept pstn fac
voice lpcor policy pstn
service fac
accept endusers fac
accept pstn fac
application
package auth
param passwd-prompt flash:enter_pin.au
param max-retries 0
param abort-digit *
param term-digit #
param user-prompt flash:enter_account.au
param passwd 12345
param max-digits 32
interface GigabitEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.25.76.1 255.255.255.0
interface GigabitEthernet0/1.201
encapsulation dot1Q 201
ip address 10.25.77.1 255.255.255.0
voice-port 0/0/0
lpcor outgoing pstn
trunk-group ALL_FXO 1
supervisory disconnect dualtone mid-call
supervisory custom-cptone 2n-gsm
no battery-reversal
input gain -6
output attenuation -3
cptone SA
timeouts call-disconnect 1
timeouts wait-release 1
timing sup-disconnect 50
connection plar 5040
caller-id enable
cable-detect
dial-peer cor custom
name local
name longdistance
name 911
name Internal
name fac-int
name user-fac
dial-peer cor list local
member local
dial-peer cor list call-local
member local
dial-peer cor list call-longdistance
member longdistance
dial-peer cor list user1
member local
member 911
dial-peer cor list user2
member local
member longdistance
member 911
member user-fac
dial-peer cor list user3
member 911
dial-peer cor list call-911
member 911
dial-peer cor list call-internal
member Internal
dial-peer cor list fac-int
member local
member 911
member fac-int
dial-peer cor list user-fac
member user-fac
dial-peer voice 96 pots
trunkgroup ALL_FXO
corlist outgoing call-911
destination-pattern 9[2-6]......
forward-digits 7
dial-peer voice 901 pots
trunkgroup ALL_FXO
corlist outgoing call-911
destination-pattern 901[2-4,6-8].......
forward-digits 10
dial-peer voice 800 pots
trunkgroup ALL_FXO
destination-pattern 9800T
prefix 800
dial-peer voice 900 pots
destination-pattern 9T
port 0/0/3
prefix 9
dial-peer voice 11 pots
destination-pattern 901........
port 0/0/3
forward-digits 10
dial-peer voice 9051 pots
trunkgroup ALL_FXO
corlist outgoing call-local
destination-pattern 905........
forward-digits 10
dial-peer voice 19 pots
trunkgroup ALL_FXO
corlist outgoing fac-int
destination-pattern 900T
translate-outgoing called 1
forward-digits all
dial-peer voice 20 voip
description International calling
service clid_authen_collect
destination-pattern 900T
lpcor outgoing pstn
session target ipv4:10.25.76.1
incoming called-number 9T
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
ephone-dn 1
number 4121
name John
corlist incoming fac-int
ephone 1
lpcor type local
lpcor incoming endusers
mac-address E0D1.730A.21DE
ephone-template 2
type 7942
button 1:1
voice register dn 33
number 4163
call-forward b2bua busy 5000
call-forward b2bua noan 5000 timeout 20
call-forward b2bua unregistered 5000
allow watch
name Joseph
mwi
voice register pool 33
busy-trigger-per-button 4
id mac BC67.1C31.C8AA
type 7821
number 1 dn 33
cor incoming fac-int 1 4163
dtmf-relay rtp-nte
codec g711ulaw
transfer max-length 4
Debug Logs
DAMAC-CME-ANOUD#DEBUg VOIce lpcor all
voip lpcor all debugging is on
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#term
DAMAC-CME-ANOUD#terminal i
DAMAC-CME-ANOUD#terminal i
Apr 12 16:22:39.825: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId F692C420E06611E4BB0CE7FDC5486EA5, SetupTime 16:22:35.615 UTC Sun Apr 12 2015, PeerAddress 4130, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:22:39.825 UTC Sun Apr 12 2015, DisconnectTime 16:22:39.825 UTC Sun Apr 12 2015, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 0, ReceiveBytes 0
Apr 12 16:22:39.825: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:22:35.609,cgn:4130,cdn:,frs:0,fid:2599,fcid:F692C420E06611E4BB0CE7FDC5486EA5,legID:284C,bguid:F692C420E06611E4BB0CE7FDC5486EA5mon
DAMAC-CME-ANOUD#terminal imon
                          ^
% Invalid input detected at '^' marker.
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
Apr 12 16:22:44.089: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
   lpcor endusers
Apr 12 16:22:44.089: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
   lpcor endusers index 10
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#show debug
VOIP LPCOR:
debug voip lpcor error call is ON (filter is OFF)
debug voip lpcor error call informational is ON (filter is OFF)
debug voip lpcor error software is ON
debug voip lpcor error software informational is ON
debug voip lpcor detail is ON (filter is OFF)
debug voip lpcor function is ON (filter is OFF)
debug voip lpcor inout is ON (filter is OFF)
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
Apr 12 16:23:22.889: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId FBA1532AE06611E4BB10E7FDC5486EA5, SetupTime 16:22:44.089 UTC Sun Apr 12 2015, PeerAddress 4130, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:23:02.009 UTC Sun Apr 12 2015, DisconnectTime 16:23:22.889 UTC Sun Apr 12 2015, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 1038, ReceiveBytes 166080
Apr 12 16:23:22.889: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:22:44.093,cgn:4130,cdn:,frs:0,fid:2600,fcid:FBA1532AE06611E4BB10E7FDC5486EA5,legID:284D,bguid:FBA1532AE06611E4BB10E7FDC5486EA5
Apr 12 16:23:22.905: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId FBA1532AE06611E4BB10E7FDC5486EA5, SetupTime 16:22:57.795 UTC Sun Apr 12 2015, PeerAddress 0097150107659, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:23:02.015 UTC Sun Apr 12 2015, DisconnectTime 16:23:22.905 UTC Sun Apr 12 2015, CallOrigin 1, ChargedUnits 0, InfoType 2, TransmitPackets 1038, TransmitBytes 174384, ReceivePackets 1043, ReceiveBytes 166880
Apr 12 16:23:22.905: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:22:57.785,cgn:4130,cdn:0097150107659,frs:0,fid:2601,fcid:FBA1532AE06611E4BB10E7FDC5486EA5,legID:284E,bguid:FBA1532AE06611E4BB10E7FDC5486EA5
Apr 12 16:23:25.317: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
   lpcor endusers
Apr 12 16:23:25.317: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
   lpcor endusers index 10
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#un all
All possible debugging has been turned off
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#!ok just send me these logs
DAMAC-CME-ANOUD#!i have to move from here
Apr 12 16:24:02.153: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId 14343755E06711E4BB16E7FDC5486EA5, SetupTime 16:23:25.323 UTC Sun Apr 12 2015, PeerAddress 4130, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:23:43.393 UTC Sun Apr 12 2015, DisconnectTime 16:24:02.153 UTC Sun Apr 12 2015, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 930, ReceiveBytes 148800
Apr 12 16:24:02.153: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:Tnow
DAMAC-CME-ANOUD#\WC,ft:04/12/2015 16:23:25.321,cgn:4130,cdn:,frs:0,fid:2602,fcid:14343755E06711E4BB16E7FDC5486EA5,legID:2850,bguid:14343755E06711E4BB16E7FDC5486EA5
Apr 12 16:24:02.169: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId 14343755E06711E4BB16E7FDC5486EA5, SetupTime 16:23:39.169 UTC Sun Apr 12 2015, PeerAddress 0097150107659, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:23:43.389 UTC Sun Apr 12 2015, DisconnectTime 16:24:02.169 UTC Sun Apr 12 2015, CallOrigin 1, ChargedUnits 0, InfoType 2, TransmitPackets 930, TransmitBytes 156240, ReceivePackets 937, ReceiveBytes 149920
Apr 12 16:24:02.169: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:23:39.169,cgn:4130,cdn:0097150107659,frs:0,fid:2603,fcid:14343755E06711E4BB16E7FDC5486EA5,legID:2851,bguid:14343755E06711E4BB16E7FDC5486EA5

We have come across this issue today in 10.9.5 (so affects 10.9.4 as well) but it was occurring in Sydney as well with a client and for me in Melbourne.

Issue with instant ringback when using sip trunk to SP

Hi all,
We use CUCM 8.0.2.
We have a SIP trunk to a SP connected via one of our Cisco 2911 routers configured as a CUBE.
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, RELEASE SOFTWARE (fc2)
c2900-universalk9-mz.SPA.150-1.M3.bin
Cisco CISCO2911/K9 (revision 1.0)
Technology Package License Information for Module:'c2900'
Technology Technology-package
                  Current       Type
ipbase        ipbasek9      Permanent
security      securityk9    Permanent
uc              uck9            Permanent
data           None            None
We also have several ISDN lines that run out via various Cisco routers configured as H323 gateways.
We use 7945 and CIPC for our phones.
We're having an issue with calls going via the SIP trunk where we hear ringing instantly after dialling - but before the actual device at the other end starts ringing (considerable difference).
Using the SIP trunk: If I make a call to my mobile phone - I hear ringing instantly - about 3 rings before my mobile phone actually starts ringing - undesireable.
Using H323 gateway: If I make a call to my mobile phone - I hear silence for a bit - then ringing when the mobile starts ringing - desired.
Using SIP trunk: If I make a call to a landline that is ready - it rings instantly for at least 1 ring - before the actual phone I'm calling starts ringing - undesireable.
Using H323 gateway: There is a momentary pause before hearing ringing on my phone and the phone I dialled - desired.
Using SIP trunk: If I make a call to a landline that is off-hook (with no call-waiting/etc.) - it rings once and then returns the busy signal (the worst issue) - undesireable.
Using H323 gateway: There is a momentary pause before hearing busy signal - desired.
Phone to phone internally (same network): Operates as expected (instantly rings locally and on the phone I'm calling). Between phones that utilise the SIP trunk and phones that utilise the H323 gateways within the same network - communication is instant and as expected.
Any ideas why this happens and how to stop it?
I want it to not ring until the situation is known and that it can provide the appropriate feedback (ringing/busy/etc.).
Some possibly relevant config (note that there is a known bug with this IOS that meant I had to declare the codec in each dial-peer as the voice class would not work):
voice service voip
address-hiding
mode border-element
allow-connections sip to sip
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
header-passing error-passthru
early-offer forced
midcall-signaling passthru
interface GigabitEthernet0/0
ip address x.x.x.x 255.255.255.252
ip access-group acl.SIP-IN in
no ip redirects
no ip unreachables
ip verify unicast reverse-path
ip virtual-reassembly
duplex full
speed 100
no cdp enable
gateway
timer receive-rtp 1200
sip-ua
connection-reuse
gatekeeper
shutdown
dial-peer voice 1 voip
description *** INBOUND CALLS FROM CARRIER ***
translation-profile incoming SIPTRUNK-INCOMING
session protocol sipv2
incoming called-number #blah blah#
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 61 voip
description **** WA, SA AND NT NUMBERS ****
destination-pattern 0[8]........
session protocol sipv2
session target ipv4:<MY SP's SIP SERVER>
incoming called-number 0[8]........
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 81 voip
description **** MOBILE NUMBERS ****
destination-pattern 0[4]........
session protocol sipv2
session target ipv4:<MY SP's SIP SERVER>
incoming called-number 0[4]........
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 500 voip
description *** INBOUND SIP TRUNK TO CUCM PUB ***
translation-profile outgoing SIPTRUNK-CALLING-ADD-0
preference 1
destination-pattern 5[12]..
session protocol sipv2
session target ipv4:<OUR CUCM PUBLISHER IP>
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
Any help or a point in the right direction would be greatly appreciated.
Cheers,
Brett

I ended up resolving this issue as follows:
In CUCM, under Device > Device Settings > SIP Profile.
I modifed the profile relevant to my SIP trunk, under the "Trunk Specific Configuration", I set "SIP Rel1XX Options" from "Disabled" to "Send PRACK if 1xx Contains SDP".
Now, I get the expected delay before hearing ringback.
Solved!

Issue with Package ??

Similar Messages

Maybe you are looking for