Issue with Planning sequence authorization in WAD
Hi,
There is a planning sequence which I can execute through Modeler without any issue. However I am not able to execute the same from WAD. It says 'You are not authorized to execute planning sequence....'
Please advise.
Regards,
SSC
hI,
You need to create one role in which add planning related authorization object ie
S_RS_PLSE Planning Function
S_RS_PLSQ Planning Sequence
S_RS_PLST Planning Service Type
S_RS_PPM Authorization Object for BI Planning Process Management etc....
and attach to your id.
I think you do not have authorization for S_RS_PLSQ.
try this.
Regards,
Ganesh
Similar Messages
-
An issue with authentication and authorization on ISE 1.2
Hi, I'm new to ISE.
I have an issue with authentication and authorization.
I have ISE 1.2 plus patch 6 installed on VMware.
I have built-in Windows XP supplicant and 2960 cisco switch with IOS c2960-lanbasek9-mz.150-2.SE5.bin
On supplicant I use EAP(PEAP) with EAP-MSCHAP v2.
I created authentication and authorization rules with Active Directory as External Identity Source. Also I applied authorization profile with DACL.I login on Windows XP machine under different Active Directory accounts. Everything works fine (authentication, authorization ), but only for several hours. After several hours passed , authentication and authorization stop working . I can see that ISE trying authenticate and authorize users, but ISE always use only one account for authentication and authorization . Even if I login under different accounts ISE continue to use only one last account.
I traied to reboot switch and PC,but it didn’t help. Only rebooting of ISE helps. After ISE rebooting, authentication and authorization start to work properly for several hours.
I don’t understand is it a glitch or I misconfigured ISE or switch, supplicant?
What should I do to resolve this issue?
Switch configuration:
testISE#sh runn
Building configuration...
Current configuration : 7103 bytes
! Last configuration change at 12:20:15Tue Apr 15 2014
! NVRAM config last updated at 10:35:02 Tue Apr 15 2014
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname testISE
boot-start-marker
boot-end-marker
no logging console
logging monitor informational
enable secret 5 ************
enable password ********
username radius-test password 0 ********
username admin privilege 15 secret 5 ******************
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 172.16.0.90 server-key ********
aaa session-id common
clock timezone 4 0
system mtu routing 1500
authentication mac-move permit
ip dhcp snooping vlan 1,22
ip dhcp snooping
ip domain-name elauloks
ip device tracking probe use-svi
ip device tracking
epm logging
crypto pki trustpoint TP-self-signed-1888913408
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1888913408
revocation-check none
rsakeypair TP-self-signed-1888913408
crypto pki certificate chain TP-self-signed-1888913408
dot1x system-auth-control
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip ssh version 2
interface FastEthernet0/5
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/6
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/7
interface Vlan1
ip address 172.16.0.204 255.255.240.0
no ip route-cache
ip default-gateway 172.16.0.1
ip http server
ip http secure-server
ip access-list extended ACL-ALLOW
deny icmp any host 172.16.0.1
permit ip any any
ip radius source-interface Vlan1
logging origin-id ip
logging source-interface Vlan1
logging host 172.16.0.90 transport udp port 20514
snmp-server community public RO
snmp-server community ciscoro RO
snmp-server trap-source Vlan1
snmp-server source-interface informs Vlan1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps mac-notification change move
snmp-server host 172.16.0.90 ciscoro
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
radius server ISE-Alex
address ipv4 172.16.0.90 auth-port 1812 acct-port 1813
automate-tester username radius-test idle-time 15
key ******
ntp server 172.16.0.1
ntp server 172.16.0.5
endYes. Tried that (several times) didn't work. 5 people in my office, all with vers. 6.0.1 couldn't access their gmail accounts. Kept getting error message that username and password invalid. Finally solved the issue by using Microsoft Exchange and "m.google.com" as server and domain and that the trick. Think there is an issue with imap.gmail.com and IOS 6.0.1. I'm sure the 5 of us suddently experiencing this issue aren't the only ones. Apple will figure it out. Thanks.
-
Issue with export in Excel in WAD
Hi
I have an issue with export to excel in WAD. I have a web template with two or more tabs.
On the webtemplate I have two buttons to export to excel. One to export the content from the active tab and one button to export content in all tabs.
My problem is that when I export to excel it always add the current/active content twice. I've tried with both buttons and they work as expected except that they export one table to much (the active).
can anyone help / give a clue what to look for.
br,
John
Edited by: John Dolph on Apr 15, 2010 10:50 AMHi
Sorry I has been a while but the problem still occurs,
I've defined my export button group like this in a seperate template and I expected that it would only return the resultset from TAB_A and TAB_B but it also export the resultset from the tab I'm currently on.
<bi:TEMPLATE_PARAMETERS name="TEMPLATE_PARAMETERS" />
<bi:BUTTON_GROUP_ITEM name="TAB_BUTTONs" designheight="23" designwidth="300" >
<bi:BUTTON_LIST type="ORDEREDLIST" >
<bi:BUTTON type="COMPOSITE" index="2" >
<bi:CAPTION value="EXCEL" />
<bi:TOOLTIP value="Table, Graph and/or Table/Graph download to PDF" />
<bi:ACTION type="CHOICE" value="INSTRUCTION" >
<bi:INSTRUCTION >
<bi:EXPORT >
<bi:ITEM_REF_LIST type="UNORDEREDLIST" >
<bi:ITEM_REF index="1" value="TAB_A_ANALYSIS" />
<bi:ITEM_REF index="2" value="TAB_A_CHART" />
<bi:ITEM_REF index="3" value="TAB_B_ANALYSIS" />
<bi:ITEM_REF index="4" value="TAB_B_CHART" />
</bi:ITEM_REF_LIST>
<bi:EXPORT_FORMAT value="XLS" />
</bi:EXPORT>
</bi:INSTRUCTION>
</bi:ACTION>
</bi:BUTTON> -
Has anyone had issues with Planning security refreshing in Essbase
I am on Planning version 9.3.0.1 and we are having issues with planning users being able to use an essbase connection to pull data from smartview. They are able to see data in web forms in planning but they get #no access when they try to connect to the same data in smartview.
Has anyone else experieced this issue.If user works when you provision individually its because they were set in the environment in EAS.
group has to have all the access needed (bug in orig). css file open a ticket for the file name. example user needs calc access you setup calc but bug in system is not also giving user read and write access. Thus you can individually add this to the group in provisioning area in shared services. in EAS goto File open- editors create/run script with
alter user 'userID' Add application_access_type Planning;
alter user 'userID' add application_access_type Essbase; to add user to the environment if error you need to refresh eas first then run maxl script for planning you also need to go to workspace and select any of your dimensions all your groups ...edit .. migrate identities.. to get group/Users in planning wether adding or removing users. when you do planning changes you need to do database and security filters refresh. -
Performance issues with Planning data load & Agg in 11.1.2.3.500
We recently upgraded from 11.1.1.3 to 11.1.2.3. Post upgrade we face performance issues with one of our Planning job (eg: Job E). It takes 3x the time to complete in our new environment (11.1.2.3) when compared to the old one (11.1.1.3). This job loads then actual data and does the aggregation. The pattern which we noticed is , if we run a restructure on the application and execute this job immediately it gets completed as the same time as 11.1.1.3. However, in current production (11.1.1.3) the job runs in the following sequence Job A->Job B-> Job C->Job D->Job E and it completes on time, but if we do the same test in 11.1.2.3 in the above sequence it take 3x the time . We dont have a window to restructure the application to before running Job E every time in Prod. Specs of the new Env is much higher than the old one.
We have Essbase clustering (MS active/passive) in the new environment and the files are stored in the SAN drive. Could this be because of this? has any one faced performance issues in the clustered environment?Do you have exactly same Essbase config settings and calculations performing AGG ? . Remember something very small like UPDATECALC ON/OFF can make a BIG difference in timing..
-
Create datasource issue with Planning 9.3.1
The plan is to upgrade to 9.3.3 so will need 9.3.1 first.
I have installed 9.3.1 Planning on win 2003 server and finished the configuration steps as well.
All my hyperion planning databases are on a Oracle RAC system 11g installed on Linux.
The individual SIDs are hyp1 and hyp2 and we use HYP to connect.
I used HYP as SID for all other configuration steps and was successful but when I try to use HYP as SID in the create datasource process I get the error " Relational Database Connection Failed:= :[Hyperion][Oracle JDBC Driver][Oracle]ORA-12505 Connection refused, the specified SID (HYP) was not recognized by the Oracle server."
If I use either HYP1 or HYP2 it works fine but does not work with HYP.
Is this an issue with 9.3.1 or will this continue to be an issue with 9.3.3 as well? Any suggestions to use HYP as my SID instead of using HYP1 or HYP2?
Thank you.That article didnt mention planning but I wonder if it is possible to create a datasource using the standard method pointing to one db instance
Then go into HSPSYS_DATASOURCE and update rdb_server_url to something like (it will need updating to the correct path)
jdbc:hyperion:oracle:TNSNamesFile=D:\oracle\\product\\10.2.0\\db_1\\NETWORK\\ADMIN\\tnsnames.ora;TNSServerName=HYP
or may be worth having a look at http://www.datadirect.com/resources/jdbc/oracle-rac/connecting.html
as 9.3.1 uses datadirect jdbc drivers.
Cheers
John
http://john-goodwin.blogspot.com/ -
Deployment issue with Planning & EPMA 11.1.2.0
Hi
I installed the following applications of Hyperion suite:
Essbase
EPMA
CalcManager
Planning
During configuring i configured each product separately since i wanted to configure separate DB for each of them.
The configuration went with no issues. But now when i log-in into workspace and go to Navigate, i only see administer.
There is no option for EPMA and Planning applications.
Did i miss any step?
I have used IIS as my webserver because Oracle HTTP gave me some error while deploying (unable to initiate OPMN). Is it some issue with IIS
I ahve installed my applications on Win XP SP3, IIS 5.1 and its a 32bit machineDid you reconfigure the web server after you finished configuring all of the products?
-
SAP BI 7.0 Transport issue with HR Structural Authorization DSO
Hi,
I am trying to transport HR Structural Authorization DSO Objects in BI 7.0 from Dev to QA system. The Data sources are 0PA_DS02 and 0PA_DS03. ( I am sure that there are lots of changes in Authrorization concept in BI 7.0),.
1. Please suggest me if I need to make any changes and tests before moving these authorization objects to QA system.
2. Also, do I need to take any pre-cautions while activating business content objects 0TCTAUTH and 0TCTAUTH_T (Datasources look like are from 3.x) as I am getting issue with the activation of the transfer structure for these objects?
Thanks a lot for your valuable inputs.
Regards
Paramesh
Edited by: paramesh kumar on May 5, 2009 12:45 AMHi Paramesh.
You can use the DSOs 0PA_DS02 and 0PA_DS03 in BI7.0 as well. You just need to use the new generation of analysis authorizations in transaction RSECADMIN.
You can use 0TCTAUTH and 0TCTAUTH_T in BI7.0, however we have experienced som problems with the 0TCTAUTH_T extractor, which dumped because of a poorly designed SELECT statement that was unable to cope with 10000 records. We have replaced it with a generic data source that uses table RSECTEXT directly.
Regards,
Lars -
Strange Issue with Planning 11.1.2
Hi All,
Recently i've installed Hyperion 11.1.2 and i've noticed a strange issue. I've logged in to workspace as administrator, everything is fine. Now i logged off and then login as a user with role as Planner. He should not see Planning Administrator menu right ? But Planner can also able to see the admin menu. Now i've logged off and cleared all the Cookies, history in the Browser, and login as a user now, it has given the correct message as "Application is in maintenance mode, new logins are not allowed" and unable to see Admin menu now. Why it is happening. Is it really a bug or issue with the browser. Even if there is a issue with Browser, it should not work in this way right ? Pls. adviceI have seen issues with other products in the 11.1.2 line retaining permissions with user login/logout on the same browser.
As John says log a case show them how to replicate and continue forward. Likely 11.1.1.2.1 fixes this and it's know however get the case logged to get it in the pipeline in case you've discovered a new defect.
And going forward you will need to ensure if you are logging in as a high access user on a user desktop to exit all browsers and ensure they are not running in task manager before leaving that pc.
Regards,
John A. Booth
http://www.metavero.com -
Issue with Planning service getting crashed Automatically due to dll file
Hello,
I am having an issue with the Hyperion Planning service which is getting crashed and the following is noted in the Eventviewer:
Faulting application name: HyS9Planning.exe, version: 1.0.0.2, time stamp: 0x4d110efc
Faulting module name: jrosal.dll, version: 0.0.0.0, time stamp: 0x4e8c8104
Exception code: 0x40000015
Fault offset: 0x000000000000cb0b
Faulting process id: 0x1960
Faulting application start time: 0x01ce14f7a8434b04
Faulting application path: D:\Oracle\Middleware\user_projects\domains\EPMSystem\bin\HyS9Planning.exe
Faulting module path: D:\Oracle\Middleware\jrockit_160_29\jre\bin\jrosal.dll
Report Id: 967733e6-8152-11e2-9257-5cf3fc335086The following is recorded in the log file:
<Mar 2, 2013 2:45:22 PM CST>
<Error> <HTTP> <BEA-101017> <[ServletContext@271625046[app:PLANNING module:HyperionPlanning path:/HyperionPlanning spec-version:2.5 version:11.1.2.0]]
Root cause of ServletException.
java.lang.OutOfMemoryError: classblock allocation, 11312928 loaded, 11M footprint, in check_alloc (src/jvm/model/classload/classalloc.c:215).
Attempting to allocate 2G bytes
There is insufficient native memory for the Java
Runtime Environment to continue.
Possible reasons:
The system is out of physical RAM or swap space
In 32 bit mode, the process size limit was hit
Possible solutions:
Reduce memory load on the system
Increase physical memory or swap space
Check if swap backing store is full
Use 64 bit Java on a 64 bit OS
Decrease Java heap size (-Xmx/-Xms)
Decrease number of Java threads
Decrease Java thread stack sizes (-Xss)
Disable compressed references (-XXcompressedRefs=false)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631)
at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:343)
Truncated. see log file for complete stacktraceI checked the following forum
Re: Oracle JRockit R28.2.2. OutOfMemoryError: classblock allocation
Should I need to increase -XX:MaxClassBlockMemory to 75M. If so, how should I do it, I am unaware of how I can set the values? My Planning server has 136GB Ram and 18 Cores.
Thanks,
hyperionEPMThe issue was related to the heap size being too much and as a result the Class block memory was not getting enough memory. I think we can make a use of -XXCompressedRefs:32 parameter in the Java start up to allow the heap size to increase till 32 Gb.
-
Issue with planning version in KP98
Hi Team,
I have an issue with KP98 transaction when copying the actual data to plan data . The problem which I am facing is we are copying period 1 to 6 actuals data to 1 to 6 Forecast version 82 and after executing it copies the data in to old tables COSP but it is not updating FAGLFLEXT table.
We have created a planner profile with summary table FAGLFLEXT and posted the data using KP06 and GP12N.
To update data we are executing FAGL_CO_PLAN transaction and it load the data in to FGALFLEXT table . Please help me to understand why data is not loaded when using KP98 and why it is loading when using FAGL_CO_PLAN.
Thank you
SrivaniHi Srivani
As far as I know, KP98 is meant to copy the Plan / Actual data from one version to another. It is not designed to update FAGL tables
I am not sure if there is an option to copy the data similar way in New GL planning or not. But what you are doing currently seems to be the right way to me
Br, Ajay M -
How to use master locks in a process chain with planning sequence
Hi,
when I start a process chain which contains a planning sequence there is no master lock set. The chain stops and I get the message "Data in InfoProvider XYZ is locked by user TIMMAY". What can i do to enable the master locks?
Thanks for your help!Hello,
When a planning sequence is triggered via process chain system first first tries to set a normal lock and if this is possible, these selections are stored as master locks and then the normal locks are released.
In your case if some data is already locked by another user the lock conflict will occur in teh first step only where system tries to create a normal lock before creating master locks.
If Administrator wants to trigger the process chain he should ask other users to come out of the planning layouts so that all the locks are released and then trigger the chain and after this the system will set the master locks. Packaging in planning sequence process type won't help in setting master locks even if the data is locked by other user.
Also, after master locks are deleted in RSPLSE, the transaction data remains protected by normal data locks during runtime. Nevertheless, without master locks it is no longer guaranteed that parts of planning sequences can be carried out without encountering lock conflicts with other users.
Regards,
Deepti -
Issue with IP variable binding in WAD
Hi experts,
I'm having issues while trying to bind variable1 to variable2 in WAD. Here's the scenario:
I have configured through T-code rsbbs the QUERY A, which is passing two "generic" characteristic values to the receptor (QUERY B).
These two characteristic values are sent to the variables that are executed by formula (sequence) AND also to the variables in QUERY B.
The issue is when the user changes the variable selection (thru pop-up) for the formula (sequence), it does not update the variable from the Query B, thus, I can't see the correct selection for Query B after executing the sequence.
I've read numerous postings and I tried to bind these two variables (variable from formula sequence to QueryB variable) as a next command after the sequence execution unsuccessfully. The variables are not updated, it always shows the values before the user change.
PS: version 7.
Please help!
Thanks,
OrcamentoHi Prathish,
Thanks for your reply. However, the issue has not been solved.
Let me try to explain in more detail...
E.g.
Step 1: Query A sends value thru RSBBS to Variable 1 (Query B), and Variable 2 (fox formula from IP) by right clicking on "GO TO" from selected cell>> OK.
Step 2: WAD opens with Query B - with variable values sent from Query A >> OK.
Step 3: User changes value of FOX Variable 2 (this value was first sent from step 1)... let's say that value passed from Query A was 10, and user changes to 20. Then, execute the function >> OK.
Step 4: Since Variable 1 still contains value 10 sent by RSBBS, Query B does not show results just changed (value 20).
I believe that I can bind these two variables through WAD, but I tried unsuccessfully.
Do you know if there are any configuration that I can bind these two variables in WAD, which should work dynamically?
Thank you so much for your help!
Orcamento -
MRP not running - Issue with Planning File
Hi
In MD06 - MRP List, I see MRP list last generated on 5/30/2008. There is a production order
with requirements date of 3/27/2008 which has been met but is still showing up on the MRP List.
The goods issue for the production order was posted on 7/30/2008. The goods receipt for the purchase order of material is posted on 5/6/2008
IN the stock requirements screen (Transaction: MD04), there is no entry except the following:
8/29/2008 Stock Available Qty = 0
There is no entry in the planning file for this material. We run MRP automatically in the night using MD01 and this is not cleraring up the MD06 - MRP list.
Why was not the planning file entry generated?
How do i resolve this issue?
Please help.
KetanHi,
It is perfectly ok for not having the planning file entry for this Material.
Create a PIR for this Material now, and acheck whether system will creates the planning File entry or not..
Inspite of having the Demand for the Material, when there is no planning file entry is a problem..
But, every time there will not be a Planning file file entry, unless there is a change with reference to the Planning..
Regards,
Siva -
JMS Adapter Config issues with Plan.xml
Hi All,
I'm learning how to configure JMS Resources in WLS to use within a JMS adapter in my application. My approach so far has been :
1. Configure Outbound Connection in JMS Adapter : eis/wls/Queue. I used the weblogic.jms.XAConnectionFactory as the Connection Factory.
2. Create Queue within SOAJMSModule : jms/MyQueue and target - soa managed server.
Updated the JMSAdapter.rar deployment and restarted the SOA server as well as the JMS module.
3. Create JMS Adapter within JDeveloper to use jms/MyQueue as the destination and eis/wls/Queue as the JNDI source.
On deployment and running, I see this following error. Apologies it is a bit difficult to trawl through. I did have a look in the Plan.xml and it definitely has an entry for this Adapter and the jndi-name. Any other approach?
Oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'PostException' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. ExceptionManagement:JMSPostException [ PostException_ptt::PostException(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/wls/Queue'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/wls/Queue. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(Unknown Source) at com.sun.el.MethodExpressionImpl.invoke(Unknown Source) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:765) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:305) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:276) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(Unknown Source) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source) at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source) at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207) at weblogic.work.ExecuteThread.run(ExecuteThread.java:176) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'PostException' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. ExceptionManagement:JMSPostException [ PostException_ptt::PostException(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/wls/Queue'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/wls/Queue. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:992) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 81 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'PostException' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. ExceptionManagement:JMSPostException [ PostException_ptt::PostException(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/wls/Queue'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/wls/Queue. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:1012) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:803) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:235) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:106) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 84 more
The deployment plan reads as follows :
<deployment-plan xmlns="http://xmlns.oracle.com/weblogic/deployment-plan" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/deployment-plan http://xmlns.oracle.com/weblogic/deployment-plan/1.0/deployment-plan.xsd" global-variables="false">
<application-name>connectors</application-name>
<variable-definition>
<variable>
<name>ConnectionInstance_eis/wls/Queue_JNDIName_13401799388390</name>
<value>eis/wls/Queue</value>
</variable>
<variable>
<name>ConfigProperty_ConnectionFactoryLocation_Value_13401801874110</name>
<value>weblogic.jms.XAConnectionFactory</value>
</variable>
</variable-definition>
<module-override>
<module-name>JmsAdapter.rar</module-name>
<module-type>rar</module-type>
<module-descriptor external="false">
<root-element>weblogic-connector</root-element>
<uri>META-INF/weblogic-ra.xml</uri>
<variable-assignment>
<name>ConnectionInstance_eis/wls/Queue_JNDIName_13401799388390</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="oracle.tip.adapter.jms.IJmsConnectionFactory"]/connection-instance/[jndi-name="eis/wls/Queue"]/jndi-name</xpath>
<origin>planbased</origin>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_ConnectionFactoryLocation_Value_13401801874110</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="oracle.tip.adapter.jms.IJmsConnectionFactory"]/connection-instance/[jndi-name="eis/wls/Queue"]/connection-properties/properties/property/[name="ConnectionFactoryLocation"]/value</xpath>
</variable-assignment>
</module-descriptor>
<module-descriptor external="false">
<root-element>connector</root-element>
<uri>META-INF/ra.xml</uri>
</module-descriptor>
<module-descriptor external="true">
<root-element>wldf-resource</root-element>
<uri>META-INF/weblogic-diagnostics.xml</uri>
</module-descriptor>
</module-override>
<config-root>E:\oracle\product\middleware\11.1.1\soa_11.1\soa\connectors\plan</config-root>
</deployment-plan>
Thanks
JB
Edited by: 939260 on Jun 20, 2012 5:13 AMHi JB,
Please follow the below steps from beginning...
1. Create the JMS Server in the Admin Console, the target server for the same should be the soa server
2. create new JMS Module.
3. Create new Connection factory in resources, give your JNDI names, the target servers should be the admin and the soa.
4. create new queue, give the JNDI names, the target server should be the JMS Server which you have created in the step 1 above.
5. Now go to deployments, slect the JMS adapter, click update, and say redeploy with the location of JMS-plan.xml given below...
6. Now inside the composite while configuring the JMS adapter, select the queue which you have created above.
If you have followed the abpve steps correctly, you should not face any problem.
Hope this helps,
N
Maybe you are looking for
-
Wireless connection doesn't work - G770
Hi there, I have a problem with my brand new G770 - I can't use wireless connection. After first run my home wifi AP wasn't found, so I set manual connection to it. It didn't solve the problem. So I did a lot of Googling and discovering, that Lenovo
-
How do I copy iTunes from external hard drive to iMac?
How do I copy iTunes from external Hard drive to iMac?
-
Report output to spool...
i am running a report in background and the report is having some write statements which automatically comes into the spool. now the question is when this write statements come into the spool as a output, the page display is not coming as it usually
-
How do I delete pictures that are not on "camera Roll" that I transferd from my computer?
I have tried everything..I have pictures on my phone that I transfered from my computer...they are old vaca pics and I want to delete them..They are not on the "camera roll"..I have tapped on edit, delete, ect everything and they won't delete..Please
-
No update for OEM Intel HD Graphics 4000 driver?
*bump* I really need a driver update from HP. People with the same Intel HD Graphics 4000 (+ updated drivers) are playing Second Life without fail, while mine keeps crashing due to my particular driver version's issue with basic shaders