Issue with running pages through jDev, wls starts but no target url is provided.

Hi all,
I recently downloaded an older version of jDev for a new assignment - Studio Edition Version 11.1.1.6.0 - Build JDEVADF_11.1.1.6.0CLOUD_GENERIC_121118.1600.6229.
I created a basic wls domain and I've tried running simple jspx pages, at which point a weblogic appears to have started without issue. However, my page never runs and no target domain is provided. Below is how my log appears and it just seems to hang. I'm my experience a window always popped up in my default browser with the domain and it is also shown in the log. Going to my expected default domain (http://127.0.0.1:7101/Home.jspx for example) results in a 404. I sure its something stupid, but I'm not sure how to address this issue. Any advice would be appreciated.
*** Using port 7101 ***
<Jul 7, 2013 5:01:48 PM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jul 7, 2013 5:01:52 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jul 7, 2013 5:01:52 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\dslack\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\dslack\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00017. Log messages will continue to be logged in C:\Users\dslack\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Regards - Dylan

Hi dslack,
Please delete the default domain from the following path. Close Jdev before deleting and restart , it will create a new domain.
C:\Users\dslack\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain
Thanks
Sandeep

Similar Messages

HT3131 Are there any ventilation issues with running a macbook air in clamshell mode?

Are there any ventilation issues with running a macbook air in clamshell mode?

...that makes sense to me.
but, why do so many MBA users (on this forum and others) claim that ventilation occurs through the keyboard? Is this claim based on an old macbook design?
for example, here's a related discussion (although fairly old):
11-08-2010, 12:16 PM
#6 (permalink)
SP Forsythe
Notebook Evangelist
Join Date: Jul 2007
Location: California
Posts: 660
Rep Power: 14
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
Quote:
Originally Posted by tHE j0KER
Actually I you shouldn't close the lid while running on an external screen. The keyboard of the Macbook is an air intake for the fan. Close the lid, and it could overheat.
A common misconception of unknown origin. The intake and the exhaust for the cooling fan on the 13" MB and MBP are both located on the rear slot at the base of the hinge. In fact, you can actually see the divider that separates the intake flow from the output flow. If it were through the keyboard crevices, then an awful lot of overheats would result from people using impermeable keyboard covers, as well as Apple's warranty department would be flipping out over the Apple store carrying such covers. iSkin ProTouch FX Keyboard Cover for all MacBooks - Black Printed Keys on White - Apple Store (U.S.)
Does one think that Apple sells these only for use when the Notebook is off??? http://store.apple.com/us/product/TW...co=MTM3OTUwMDE Closing the lid, whilst operating the unit actually results in cooler operation due to reduction in power consumed by operating the display, which in supporting the on-board display generates heat far greater than simply powering the video port..
Does one think that Apple sells these for use only when the MacBook is off? http://store.apple.com/us/product/TW...co=MTM3OTUwMDEApples direction for use is specifically for when using with an external display.
Currently using:
Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion
11-08-2010, 02:34 PM
#7 (permalink)
ajreynol
Notebook Virtuoso
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,542
Rep Power: 18
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
once again, I've tried a few of these keyboard covers. the Moshi keyboard cover is the ONLY one I can recommend. the others are too thick or change the keyboard experience too much.
17" Apple MacBook Pro | i7 2720m | 160GB SSD + 750GB | 16GB | HD 6750M 1GB
Dell 435MT | i7 920 | 10GB RAM | 7.64TB HDDs | HD 6970 | Win7+SL
HP Elitebook 2710p Tablet PC | 1.8GHz C2D | 4GB RAM | 160GB HDD | X3100
Apple iPhone 4 32GB | Apple iPad 64GB (Gen 3)
Stop random laptop wakeup | 5K500.B bench data | How to Disable PowerMiser
Disable Vaio beep when pressing volume or special keys
11-08-2010, 03:34 PM
#8 (permalink)
doh123
Without ME its just AWESO
Join Date: Feb 2009
Posts: 3,282
Rep Power: 22
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
2. The thing you plug into the wall is not a battery charger. The actual "charger" is built into the computer. It knows when to charge and when not to. If the little light on the power plug is amber, then its charging your battery. When its green, its just powering the laptop and NOT charging your battery at all.
Mac OS X Gamer/Porter
(We do exist!)
Wineskin 2.5 is available!. Turn Windows apps into Mac apps for free!
11-08-2010, 03:38 PM
#9 (permalink)
Wolfpup
Notebook Virtuoso
Join Date: Jun 2007
Posts: 3,871
Rep Power: 28
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
I'd leave the lid open, at least partially...yes it may be fine not doing that, but you are making heat dissipate worse, of course could even theoretically hurt the screen.
As for the battery...well there's really only two choices, have it plugged in or not. As others mentioned, you can't overcharge the battery. It can be damaged a bit from heat, but of course the number one thing that's going to damage it is discharging it...so it's a no brainer-use it plugged in whenever possible, and try to charge it whenever possible when it's not plugged in.
11-08-2010, 03:45 PM
#10 (permalink)
SP Forsythe
Notebook Evangelist
Join Date: Jul 2007
Location: California
Posts: 660
Rep Power: 14
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
Quote:
Originally Posted by doh123
1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
Nope. Apple would disagree with you on that one. Any "closure", which is, when compared to the amount of CFM, is insignificant. In fact, the opening size remains the same. it is only deflected at a slight angle when the lid is closed. Tilt your MBP and see. As well, shutting down the display lowers the heat being generated, even in the lower case. As I said, if it were a problem, Apple would not be selling stands designed to operate your unit in the closed position as the original poster of this thread proposes to do.
Currently using:
Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion

Having an issue with a page in the internet

Hello,
I registered to the forum a few days ago but did not introduce myself. Please accept my apology.
I have a Blackberry style 9670 model, of which I am very happy with.
I was having an issue with a page in the internet, in which I was receiving errors on my device. My daughter has a Blackberry Curve and she was able to access the page without any errors. I can not figure out why I do.
Thanks

I am not sure if this is the same issue but there was a bug that caused small exchange numbers to become negative which was resolved in one of the 11.1.1.3 patches, it is worth logging into My Oracle Support and having a look at the patches available.
9588147 – In exchange rates table, entering very small values become negative after you save the data forms. For example, 0.000071 becomes –7.1E-5 after you save the exchange rate.
Cheers
John
http://john-goodwin.blogspot.com/

My iPhone4 is showing no service so i power down but when i power back up it says to plug into itunes and restore, i had this same issue with another iPhone and apple replaced it but its doing the same thing on this phone any help would be apprecaited

my iPhone4 is showing no service so i power down but when i power back up it says to plug into itunes and restore, i had this same issue with another iPhone and apple replaced it but its doing the same thing on this phone any help would be apprecaited

AAAAAANNNNNNDDDDDDD go figure no one can help!!!!! i just dont know what to do, i guess no-one else does either lol!!!! thanks anyway!!!!!

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
Could any one help me out of this?
Thanks,
Rajesh

See this discussion...
https://discussions.apple.com/message/23731048#23731048

Issue while running page OC4J start up failed.

Hi,
I am working on two instances one is Local and another is in abroad.
Now when I am running simple Hello World Page by giving Local Instance connections The page is loading quickly and running fine.
Now when I am running the same Hello World Page by giving Abroad Instance connections The page load is taking almost 9-10 mins and running fine.
In the above cases what might be the issue with Abroad Instances for loading page.
1) Is it the Network Issue?
2) Is it the OC4J Issue?
Can anyone breif this senario and how to over come this issue.
And one more Issue is
Took the remote desktop of the Abroad Machine Installed JDeveloper in it and while running the Hello World page the Message OC4J start up failed is getting popedup in the Message.
In which cases we will get OC4J start up failed error.
Thanks,
Krishna
Edited by: user1000 on Feb 7, 2011 5:29 AM

I am working on two instances one is Local and another is in abroad.What is your application release?
In the above cases what might be the issue with Abroad Instances for loading page.
1) Is it the Network Issue?Could be one or more.
Can you reproduce the issue with other Self-Service pages? Any performance issues with forms?
2) Is it the OC4J Issue?What about local users who access the same page from the same network, do they encounter the same performance issues?
Can anyone breif this senario and how to over come this issue.Before investigating the performance issues with the instance/server (which are discussed many times in the forum, so just search old threads for performance tuning and you will get many hits), I would suggest you answer the above two questions to determine whether this is a network issue or an instance/server issue.
And one more Issue is
Took the remote desktop of the Abroad Machine Installed JDeveloper in it and while running the Hello World page the Message OC4J start up failed is getting popedup in the Message.
In which cases we will get OC4J start up failed error.What is the error?
Thanks,
Hussein

Issue with vlc steaming through dolphin ftp client

I am not sure if i should post this here or in the multimedia section excuse me if i am mistaken. I have been using archlinux in almost 4 weeks with gnome 3. I have installed kde today after removing gnome(pacman -Rscn gnome). I have a small home server running ftp server where i have some media files(.mkv). In gnome i usually used nautilus to access the ftp folder(sftp://servername.dyndns.org/srv/) and run vlc to stream the medias. Tried to do the same with kde dolphin with no luck.
First i was not able to view the folder with dolphin. I researched abd found this thread with a solution:
http://forum.kde.org/viewtopic.php?f=18 … 5&start=15
Now i am able to access the folder, but can't stream any media using vlc.
The following errors are from vlc:
Your input can't be opened:
VLC is unable to open the MRL.
sftp://servername.dyndns.org/srv/filename.mkv
Check the log for details.
Going into tools->messages gives the followings:
main error: open of
sftp://servername.dyndns.org/srv/filename.mkv failed:(null)
I suspect something is wrong the ftp client configuration in dolphin. This bug report also bothers me also :
http://old.nabble.com/-Bug-274170--New% … 05158.html
Other thing is that i am able to open the media files using other media players(dragon player, mplayer), but then the files are automatically downloaded into the local folder /var/tmp/kdecache-username/krun/filename.mkv. The media player then loads the file from there. Its the same if i open a text file in the server, edit it and save it. Its first downloaded to the /var/ folder then asked to upload back to the server when closed.
Its my conclusion that the ftp client in dolphin does not work properly or KDE KIO works different then whatever is used in gnome/nautilus. I hope i have explained the issue as good as possible and would appreciate any help or lead to how to solve this.

Thanks for your reply, after checking some ideas I found that to get the ftp to work I needed to use the internal IP 10.0.0.1 for it rather than the old normal IP like before the firewall(probably a very beginner error sorry for that). And I discovered the exact issue causing clients to not see their characters if not using Hamachi.
Hamachi treats everyone join to the network as though they are local I believe, so when the server send character info via Hamachi it thinks it is sending the info locally and then Hamachi itself sends it out to the extrenal client, while tracing the data I found that the login process sends a 33 byte packet of data to the client via TCP from port 5051 out to the client on a rnadom port usually in the range of 40000-50000 telling the client to send a request to the other process to ask for the character information.
Now for some reason I see when a client logs in through Hamachi that packet is sent correctly to their Hamachi IP and recived fine.(sent from 10.0.0.1:5051 to the Hamachi IP:40k-50k) but when a client tries to log in using a normal IP with Hamachi turned off, the log in process does send the 33 byte packet from 10.0.0.1:5051 to the client WAN IP through the usual port but the client never recieves this packet and as such doesn't not request the character information.
So my guess is something on the 5505 is disallowing the log in process to send the data externally to the clients WAN IP's? Though this is very odd because it does allow the client to actually log in to the account and seems to recieve at least part of that information fine.
If any help that might resolve this for me can be given I would very much appreciate it, this issue is limiting my client base and as such my income and business as a whole. Thank you in advance for any help given.

Issues with having pages display correctley. It does this in multiple browsers, Chrome, IE, and FF. Some pages display correctley.

I have been having trouble viewing pages in multiple browsers since last night. It has done this with me before. I am using an Acer Aspire and also Firefox version 23. I've tried looking online and following suggestions such as clearing the cache, retarting in safe mode, etc. Nothing seems to work. It's only on certain pages. For example- Facebook works and displays fine. It's when I go to websites like Amazon, Wix, Ebay, and others that I get the issue. The pages are displaying with a white background and just text/links and basic images. I've checked the page style and it is on Basic Page Style. Here is what I have:
http://i45.photobucket.com/albums/f78/DovesPaintedJewel/screen2.png
http://i45.photobucket.com/albums/f78/DovesPaintedJewel/screen1-1.png

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Issue while Running Page from PC

Hello friends,
I am trying to run iexpense homepage through my pc. For that I have moved the entiire AP folder from JAVA_TOP to myclasses and MDS folder from APPL_TOP/Ap
to myprojects folder. I am using the usrename/responsibility key which can access the internet expense page through ebusiness suite. When I am running the page from my PC it is giving me error telling You have encountered an unexpected error. Please contact the System Administrator for assistance. with no other error details. It looks more like a ebusiness security error but i have no idea what I am doing wrong as i can access the page in ebusiness suite with same username and responsibility. Any help or suggestion will be appreciated.
Thanks!!

Hi,
Check if the links help you:
Error running Internet Expenses from Jdeveloper
http://www.oraclearea51.com/forums/oa-framework-development-and-extension/797-running-iexpense-from-jdeveloper-r12-insufficient-privileges.html
-Anand

Issues with running datapump export

Hi all!
I am running in to an issue with data pump exports on 6 servers. They are running the following:
Windows 2008 server R1 standard
Oracle Enterprise Edition 11.1.0.7
I am entering the following:
expdp directory=DIRECTORY dumpfile=TEST1.dmp schema=ORCL
I get the following error when doing the export:
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit
Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "PSSBACKUP"."SYS_EXPORT_SCHEMA_05": pssbackup/******** directory=PSS_B
ACKUP dumpfile=testing2345.dmp schemas=cuba
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 481.6 MB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31672: Worker process DW01 died unexpectedly.
Job "PSSBACKUP"."SYS_EXPORT_SCHEMA_05" stopped due to fatal error at 14:24:16
Oracle support was brought in on this but they were not able to figure it out. Can anyone help out?

I got this from the trace file:
*** 2010-10-01 14:23:10.760
Exception [type: ACCESS_VIOLATION, UNABLE_TO_WRITE] [ADDR:0x0] [PC:0x2CFAF23, kuxgetHashCode()+121]
Incident 60413 created, dump file: D:\APP\PSSADMIN\diag\rdbms\pss2437\pss2437\incident\incdir_60413\pss2437_dw01_3740_i60413.trc
ORA-07445: exception encountered: core dump [kuxgetHashCode()+121] [ACCESS_VIOLATION] [ADDR:0x0] [PC:0x2CFAF23] [UNABLE_TO_WRITE] []
I haven't been able to pull up any information indicating how to fix this error. I'm not sure where the [UNABLE_TO_WRITE] error is referring to.

Issue with Runtime.exec() or ProcessBuilder pb.start()

I am having problem with running a separate JVM process. The finished code must be able to start and forcibly stop the spawned process. The problem I am having is that the spawned process seems to hang. I have tried reading all output from the process with no luck. The java program opens a ServerSocket on a separate thread right away. However, when this is started through Runtime.exec() or ProcessBuilder the socket does not open until the first process is terminated. I have have been looking high and low for an answer that will fix this. I could write this all as a multithreaded application, however I would really like to isolate the second process in terms of the JVM settings. I would like to be able to monitor this process directly and indirectly for failure or early termination and restart it automatically. Other Java program I run with this method experience the same problem--a hang at a variable point in execution that is not relieved until the originating process ends.
        try {
            ProcessBuilder pb = new ProcessBuilder("\"C:\\Program Files\\Java\\jre6\\bin\\java.exe\" -jar -server \"PATHTOJAR\"");
            Process p = pb.start();
            java.io.InputStream is = p.getInputStream();
            while(running) System.out.print(is.read());
        catch (java.io.IOException ioe) { ioe.printStackTrace(); }

The finished code must be able to start and forcibly stop the spawned process.Process.destroy().
I have tried reading all output from the process with no luck.No you haven't - see below.
The java program opens a ServerSocket on a separate thread right away. However, when this is started through Runtime.exec() or ProcessBuilder the socket does not open until the first process is terminated.Which of these programs is which?
ProcessBuilder pb = new ProcessBuilder("\"C:\\Program Files\\Java\\jre6\\bin\\java.exe\" -jar -server \"PATHTOJAR\"");That should be
ProcessBuilder pb = new ProcessBuilder("C:\\Program Files\\Java\\jre6\\bin\\java.exe", "-jar", "PATHTOJAR", "-server");
java.io.InputStream is = p.getInputStream();
while(running) System.out.print(is.read());(a) call ProcessBuilder.redirectErrorStream(true);
(b) the loop must stop when is.read() returns -1, and you shouldn't print that value.

Issue with normal page link redirecting to SSO page / forbidden page

Hi,
I am having an issue with a number of pages within my portal.
I have a 'List of Objects' that has been working for some time, each link in the list linked to another page.
Just lately a number of pages that are linked to within this list are not loading correctly.
When one of the items is selected, the correct page is initially displayed, but then after a couple of seconds the page is redirected to the 'Single Sign-On' page, or alternatively the page is redirected to a 'Forbidden' page with this error:
Forbidden
You don't have permission to access /pls/orasso/orasso.wwsso_app_admin.ls_login on this server.
(This page will also show up after the user tries to login when the page is redirected to the SSO page).
As well as this issue occuring at the front end, the same issue is happening when the pages are loaded from the back end, in the Navigator.
This issue is even happening when the page is opened up in 'edit' mode using the ORCLADMIN user.
Any help is greatly appreciated!!
Amanda.

Figured it out...

I'm using Firefox 3.6.23 on my windows 2000 and lately i've been having issues with web pages loading and need help figuring out why.

Some of the issues : '''1'''. Page loads blank showing web address in tab. Try reloading usually with no results.(problem have the most!) '''2'''. Message appears "problem loading page, server not found" (diff times & diff websites). '''3.''' Pg with msg "oops link broke, DNS error, server not found" then lists suggested links to sites for fix though all links connect to site IGEARED.COM. (new issue) I don't know what to do please help me identify and fix my issue(s) in english, kind of a newbie : ). thx

Try this.
Type in the address bar about:config.
Accept the warning.
In the page that appears, in the Filter box, type network.http.max-connections. Change the value to 32 (which is probably set to 256 in your case).
Close that page. Restart the browser.

Issue with Consolidate Action through Batch Process

We find that when "Load" reports an error, "Consolidate" does not fire - only from Batch. When processing manually, Consolidate fires regardless of Load errors.
We are using an Essbase load rule that results in records continuing to be loaded, when there are kickouts. So, the Essbase API is returning an error code to FDM [that's fine].
We want to run a calc script whether or not the load errors.
Again, with a "manual" process - no problem. But Batch stops prior to firing Consolidate.
We checked the Batch flag - we set it to "10" (Consolidate) and even "12" (Check).
Any thoughts?
We are trying to avoid altering the Load Action code to execute the Essbase calc within that code set.
Any inputs regarding this issue would be greatly appreciated.
Thanks

Thanks for responding back. I have seen the link before.
We have HR_PL_ADMINISTRATOR_000 role. The role has P_ASRCONT P_ORGIN and P_PERNR object. Object P_ORGIN needs to be set as
Authorization level            Read
Infotype                           *
Personnel Area                *
Employee Group              *
Employee Subgroup         *
Subtype                           *
Organizational Key            *
in order to show the Hire Process in execute hiring link on the Portal. If we put a restriction on personal area, we do not see the Hire process on the execute hiring on the portal.
Kindly advice.
Thanks,
Gowri

Issue with filtering KPIs through perspectives in a Tabular model

I am having issues with trying to filter KPIs through a perspective. In my fact table, I have three KPIs created out of SumOf measures. There are three different user groups, and one user group wants a KPI specifically for their area, so it should
not show up on the other perspectives.
I remove the SumOf column from the list of fields under the Perspectives menu (there is not an option for a KPI...just Sum of [Column Name]). When I select that perspective through my model view, it does not show the KPI under my fact table, which
is what I would expect.
When I try to analyze in Excel, or deploy to the server and connect to that perspective through a pivot table, at times all KPIs will show up (with my Sum of ... column removed) and other times, zero KPIs appear. When I connect to the default perspective,
however, everything appears.
Has anyone ran into this issue before? I have tried a process recalc on my cube through SSDB (I'm not sure if I did it right) and I tried a recalc through the Process menu to no avail. Any help will be greatly appreciated because I am stumped
at the moment.

I've had problems with KPIs in perspectives (i.e. not showing up in the correct perspective). Unfortunately, I have not been able to find a resolution. At the time I experienced the issue, I tried googling and looking at the forums, but didn't
come up with anything.

Issue with running pages through jDev, wls starts but no target url is provided.

Similar Messages

Maybe you are looking for