Issue with Validation for some report parameters

Hello,
I have a report with 2 parameters : Start_Date and End_Date. And a Validation (Function returning Error Text) with "Error message display location" = Inline Notification.
Now, in case I have end_date less than start_date (OR some other conditions, that should be checked on server side), I display the inline error (which works fine)
The problem is that the report still displays having as parameters those wrong "start_date" and "end_date", and I would like the report not be displayed at all in this case.
I could use conditional display for the report (using the same validation function), after moving parameters in another region, but I don't really like (calling twice Validation function, etc ...)
Any other idea ?
Ussing Apex 2.2 right now.
Thank you.

You can add a pseudo items start_date1 and end_date1. And a procedure that will run After Submit. You report have to address to this new item. In this case if validation is fired your pseudo parameters will not changed.
Best Regards, Kostya Proskudin

Similar Messages

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Tim

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David

How can I get (using API) the current sort column for some report

hello,
How can I get (using API) the current sort column for some report ? For example something like "fsp_sort_1_desc" - if the user sorts by the first column ?
I cannot use the :REQUEST for this, sometimes the current sort column is not in the :REQUEST, but it is still active.
I thought it was posssible by using
APEX_UTIL.GET_PREFERENCE (
p_preference IN VARCHAR2 DEFAULT NULL,
p_user IN VARCHAR2 DEFAULT V('USER'))
RETURN VARCHAR2;
function, but I don't really know which preference should I pass as parameter.
looking in WWV_FLOW_PREFERENCES$, i saw preferences_names like FSP4000_P527_R6281510839654570_SORT , I'm not sure how this name is formed.
I'm using generic columns for that complex report (which has a flexible number of columns shown), and the idea is that sometimes I have to overwrite that sort column, in case the user chose the version of the report with fewer columns than the previous one.
Can I get (using API) a list of all preferences set for some user ?
Thank you,

seems that it is FSP<app_number>P<pagenumber>R<regionnumber>_SORT.
is there anyplace where I can get these kind of things documented ?
Thank you.

Issues with nested for loops - saving images from a camera

Hi all,
I've written a vi. to capture a specific number of images ('Image No') and save these images, outputted to a folder of my choice. Each image is identified sequentially. However, I wish to do a number of iterations ('Run') of this capture sequence, such that the filename of each image would be 'Filename (Run)_(Image No).png', e.g. run 5, image 10 would be 'Filename 5_10.png'. I have tried a nested for loop for this but I receive an error 'Asynchronous I/O operation in progress' (I've attached a printscreen).
Can anyone assist me in solving this problem? I preiously posted this in machine Vision but got no response (http://forums.ni.com/t5/Machine-Vision/Capturing-image-sequences-issues-with-nested-for-loops/m-p/19...). Please find attached my vi.
Kindest regards and thanks,
Miika
Solved!
Go to Solution.
Attachments:
Labview problem.jpg ‏3841 KB
Image sequence save to file.vi ‏48 KB

Miika,
the problem is not the filenam, but the name of the folder (AHHHHH!). You try to create the same folder in the outer for loop over and over again.... (it is the error message above the '======', not below )
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Issue with authorizations for BPS

Hi Experts,
There was an issue with authorizations for BPS. We have a large number of agents that need to enter plan data via a layout. In order to control the necessary authorizations, we would like to filter via something similar to a user exit using a function module in order to avoid having to define authorization objects for each of the agents who have access to the systems. Right now, we are not sure if there is user exit concept available as it is for BW variables. Any body experienced similar issue may share their experience.
Regards,
Ankit

Hi,
In BPS, you can use user specific variables or you can set up a Variable of type exit. You can also have a variable of type authorization which uses the security / authorization of the BW system.
Hope it helps...
Cheers,
Tanish

Photoshop batch production - issues with 'save for web'

Hi,
I'm having an issue with 'save for web' on a batch. I've just spent the last 2 hours searching the web and this forum and although the issue gets touched upon, the threads either suddenly head off in another direction, end, or i just struggle to make sense of the answers given.
I have 350 images that i want to resize to thumbnails and then save for web. 2 hours ago this seemed like a 5 minute job.
I creat an action called 'batch_thumbnail' and press 'Record'.
I then select 'File' > 'Open' and select an image to open using the dialog box.
I then select 'Image' > 'Image Size' and resize the image to the thumbnail size (200 x 125) and press 'OK'.
I then select 'File' > 'Save for Web and Devices', set my optimisation settings and press 'save'.
Using the dialog box that pops up, i navigate to a pre-created directory called 'thumbs' and press 'save'.
I then select 'File' > 'Close' and on the dialog box that pops up i select 'Don't Save'.
I then stop the action from recording.
So far so good.
I then select 'File' > 'Automate' > 'Batch...' and the dialog box appears.
I select my action in the 'Action' drop down menu.
In 'Source' i set the drop down menu to 'Folder', select 'Choose' and select the target directory with my 350 images in.
In 'Destination' i set the drop down menu to 'Folder', select 'Choose' and select the target directory (thumbs), where i wish to save the thumbs.
In 'File Naming' i leave the first box as 'document name', set the second to '_thumb' and have the third as 'extension'.
I then click 'OK'.
And this is where the problem begins. Everything works fine till it trys to save the second image. I can see what's happening, as the directory path and image name that are used whilst setting up the SFW part of the action, are getting hardcoded into the action. So every resulting image is being saved as the same file, instead of being overriden by the settings in 'File Naming'.
I've tried selecting 'Override action 'Save' command', but it doesn't make any difference. Is it actually possible to batch produce files using 'Save for Web and Devices'?
Cheers,
James

I have written a couple of Save For Web batch processors, they may be of use to you?
They can both resize and run an action if required.
CS2-CS3 http://www.ps-scripts.com/bb/viewtopic.php?t=2374
CS4 http://www.ps-scripts.com/bb/viewtopic.php?t=2276 (This handles metadata)

Printing issue with pdftops for XML publisher reports.

Hi All,
We have recently upgraded from 11.5.10 to R12.1.3.
We are facing a strange issue for some of the seeded reports that were converted to type XML after R12 upgrade.
First, the reports were printed with junk / xml character while submitting the requests from application (e.g. Account Analysis Report)
We made the following changes.
- Added PDF Publisher style with required flag set to yes to the Account Analysis Report.
- Set proifle option "FND: Default Template Output Type" to PDF (it was blank)
- The pasta_pdf.cfg is configured to use pdftops for conversion
- Restarted the manager.
After this, the above report is priting fine and pdftops is converting it to correct format before printing.
But one of the printer that Oracle EBS is configured is getting stuck specifically for this postscript based request. The same report prints well on another printer.
The 'lpstat -t' shows the following status for the failing printer.
=============
printer PRT1 is idle. enabled since Tue 23 Jul 2013 03:24:40 PM EDT
/usr/lib/cups/filter/pstoraster failed
=============
The printer queue logs on the application servers shows the following details for the failing printer.
=========================================
I [22/Jul/2013:15:00:48 -0400] [Job 137] Queued on "PRT1" by "appldfin".
I [22/Jul/2013:15:00:48 -0400] [Job 137] Started filter /usr/lib/cups/filter/pdftops (PID 13530)
I [22/Jul/2013:15:00:48 -0400] [Job 137] Started filter /usr/lib/cups/filter/pstoraster (PID 13531)
I [22/Jul/2013:15:00:48 -0400] [Job 137] Started filter /usr/lib/cups/filter/hpcups (PID 13532)
I [22/Jul/2013:15:00:48 -0400] [Job 137] Started backend /usr/lib/cups/backend/socket (PID 13533)
E [22/Jul/2013:15:00:48 -0400] [Job 137] Job stopped due to filter errors.
==========
The printer that works fine on the same application server has the following message.
==========
I [22/Jul/2013:15:16:44 -0400] [Job 139] Queued on "PRT2" by "appldfin".
I [22/Jul/2013:15:16:44 -0400] [Job 139] Started filter /usr/lib/cups/filter/pdftops (PID 15825)
I [22/Jul/2013:15:16:44 -0400] [Job 139] Started backend /usr/lib/cups/backend/socket (PID 15826)
I [22/Jul/2013:15:16:44 -0400] [Job 139] Completed successfully.
==============
It only goes through 2 filters and prints just fine
The system admin team has tried to re-install the printer driver but no luck.
Any idea what could be the cause and how can fix it?
Any pointers will be highly appreciated.
Thanks
Sunil Bhavsar

Thanks Hussein.
I will check the 2 options you recommended. At the same, I would like to test the direct print from the OS using pdftops utility. But not sure how can I do that?
The concurrent request creates the .tmp file under APPLTMP and pass that as the parameter while printing such requests. But if we need to test the .PDF output using pdftops directly, what should be the syntax? Or I would say, what should be the input file and output file?
e.g.
pdftops {infile} {outfile}
I have got the .PDF output under $APPLCSF/$APPLOUT. But from one of the failed request logs, I see the system passes both as .tmp. If we need to test this directly, is there any way?
In the meantime, I will check the debug logs option and update if it provides any additional information.
Regards,
Sunil

Template - issue with validity area - check on multiple usages at once

Hi all
One customer requirement Iu2019m trying to solve, and I donu2019t find a solution, is the following:
<b>When we have two or more validity areas in the generation variant, we want to check on both at the same time in order to get the data on the SDS.</b>
<b>Is this possible or not and, in case it is possible, can someone explain me how to do this?</b>
Thanks in advance.
Two examples.
In the generation variant we have validity areas:
A.     REGION                SE
                     USE_CAT             IND
B.     REGION                NO
                     USE_CAT             IND
C.     REGION                NO
                     USE_CAT             FER
In the specification data of one VAT we have several instances. The usages added to these instances are:
1.     REGION                SE
                     USE_CAT             IND
2.     REGION                SE
                      USE_CAT             FER
3.     REGION                NO
                     USE_CAT             IND
When I use generation variant A, I only want to see instance 1 on the SDS.
When I use generation variant B, I only want to see instance 3 on the SDS.
When I use generation variant C, I donu2019t want to see any instances on the SDS.
I donu2019t find how to solve this.
When I donu2019t use a repeating group type G for validity area, using generation variant A, I get instances 1 and 2. Using generation variant B or C I get instance 3 on the SDS.
When I use a repeating group type G for validity area USE_CAT, using generation variant A or B, I get instances 1 and 3. Using generation variant C I get instance 2 on the SDS.
Similar with the exclude check put.
In the generation variant we have validity areas:
D.     REGION                SE
                     USE_CAT             IND
E.     REGION                NO
                       USE_CAT             FER
In the specification data of one VAT we have several instances. The usages added to these instances are:
4.     REGION                SE
                     USE_CAT             IND        excl
5.     REGION                REG_EU
                      REGION                SE           excl
                      USE_CAT             FER
6.     REGION                NO
                      USE_CAT             IND
When I use generation variant D, I donu2019t want to see an instance on the SDS.
When I use generation variant E, I donu2019t want to see an instance on the SDS
I donu2019t find how to solve this.
When I donu2019t use a repeating group G for validity area USE_CAT, using generation variant D, I get instance 4 on the SDS. Using generation variant E I gent instance 6 on the SDS.
When I use a repeating group G for validity area USE_CAT, using generation variant D, I get instance 6 on the SDS. Using generation variant E, I get instance 5 on the SDS.
Kind regards,
Luk

Hello Luk
You wrote: When I understand the documentation of the validity area's correct, options subset, superset, 1:1, ... always reflect to the relation of the entry in the generation variant and the usage that is maintained one on the data.
This is exactly how the link is done between data in EH&S and the data which show up in WWI document (please exclude the topic of G group at the moment; this is special). Therefore the validity area entered in GenVar is the "Leading" validity area.
Regarding you questions some "basic" work is needed. May be this help you to find new options to solve your issue:
SAP EH&S uses the "validity area type" and the "validity area". Common used are the validity types:
REGION
DGREGION
PLANT
It seems that you have created a new validity area type USE_CAT with validity areas wich you have defined by your own.
I will give you only an overview about the "normal" use of REGION. In this case the validity area is normally a 1:1 relation to a country (defintion is done via customizing). A "special" validity area is REG_WORLD (please refer to SAP docu). REG_WOLRD contains automatically (without further doing) all other validity areas of type REGION. Now it is always possible to generate new "fictive" validity areas. E.g. you Could define the validity area "NAFTA" which would have a link to the countries: US, MX etc. These validiyta areas can be used in data maintenance and in the GenVar as well.
As I have no knowlede how you have defined the USE_CAT" validity areas I can not provide you hints. But I would like to provide further hints in using the "Excl." Flag of usage of the VAT
Example: if you use Rating 1 in combination with REG_WORLD, DE excluded and the GenVar has the leading validity area DE this value is not used in WWI report. But if the genVar would have the leading validity area BE it would be used.
Please check really carefully the topic of "subset, superset, 1:1,.." because this is the "key" issue if or if not a VAT will show up in WWI.
Now back to your next question:
when on the data a validity area is excluded and the same validity area is present in the generation variant, data should not be displayed even when there is a positive match prasent as well. (e.g. positive match on region, negative match on use category).
Now as explained above: if in VAT level a validity area is excluded but the same validity area is used as leading Validity area in WWI report the value will not show up. The same should be true if you have used "G groups" with discrete validity areas
Next question:
when you defined the data as relevant for region EU and use category industrial, data should only be displayed when the generation variant contains both a region related to EU AND this industrial use.
Here I would need more information. The GenVar contains by default only one leading validity area. Therefore any further "logic" must be applied by using "G Group" in the template and now things get "worse" in some sense.
If I remember correct the following should be true:
If you have used properly the G Group with "Use_CAT" in your WWI document this should work:
You have defined the VAT as : Rating + DE + IND. Now in a special section of your WWI report you have used the G Group. By using this the value should be printed but not a parallel VAT value with Rating + DE + FER.
If you have used this logic in your whole template I really salute because the WWI template is in my opinion very complex to understand and the logic how to retrieve the data from EH&S into the WWI report is complex too and the length of the report should have increased by at least 20 % or something like that
Now you have mentioned a further option you are using:
"Currently we solve this by creating multiple characteristics (use category specific) and selecting only on validity area region based on the generation variant."
If I underdstood your explanation correct you have done the following:
If necessary you have entered a further characteristic in the Class called "use CAT" which must have values. Then using the "if else etc." logic of WWI you select only those VATs into the WWI report which does have the correct "Use Cat".
Once again:hard work which you have done. In my opinion you should go on with this approach. In doing so you have implemented an "and" logic. Only if the Value does have DE and the UseCat (in characteristic) Is e.g. FER the value will be printed.
It is complex yes but the "G Group" is much complexer
Natural solution of demands like this is using further ratings to select the data properly. It seems to be you have excluded this option.
With best regards
C.B.
Edited by: Christoph Bergemann on Sep 4, 2011 5:50 PM
Edited by: Christoph Bergemann on Sep 4, 2011 5:54 PM

Issue with indicator values in report display

Hi All,
I am getting an issue with valutype #.
we have account restricted hirerarchy ,fiscal year period and Valuetype in rows .
I need to show the actuals indicator of value type 10 data in one row for each fiscal year period.But some of the key figures we are getting # data .valuetype indiator is repeating 2 times for each period.but we need to post this # values to 10.Any one have any idea how to handle this.
for example : my report is displaying like this
Account code :   Fiscal Year period   Value type      Keyfig 1    keyfig2   Keyfig 3
CA1100 :                  001.2006
10                                  100       22
                 200
                                 002.2006
10                                   200       44
                 300
But I need the report like below
Account code :   Fiscal Year period   Value type      Keyfig 1    keyfig2   Keyfig 3
CA1100 :                  001.2006           10                  200          100       22
                                                                                002.2006           10                  300          200       44

Sirisha,
   in the Query, You can filter your query to actual value i.e. 10. display KF1 and KF2 as it is coming from source. create restricted KF with restriction on account, fiscal year period and value type (= #).
you will get exact value. or while loading to cube or ods.. you can move that value to KF3 using start routine.
Nagesh Ganisetti.

Graphical issue with resizing pop up reports

I am creating a system for my work in Access. Almost completely done and I have made some reports (based on queries) for one of our managers to view. I have these loading from a command button on a form with the code:
DoCmd.OpenReport "-reportname-", acViewReport
I have the pop up parameter set to yes as I am locking down the program for users so that they don't have access to any menus etc, so when I was loading the reports there was no way for them to get back out of them again.
When they load they work fine and display fine. The issue comes if I try to maximise, minimize or otherwise change the size of them. I have a screenshot of the original state of the report and then when it is maximised (although unfortunately my account
is not verified so I cannot add them) but basically the window graphic bugs out. Scrolling with the mouse wheel seems to refresh the page and fix the issue, but only temporarily. Scrolling using the scrollbars leaves a trail of scrollbar selectors behind it.
I have tried different screen resolutions and display settings etc. I am running Access 2010 on Windows 7 Professional SP1 64-bit with 8GB of ram so I don't feel like it should be a display issue but that is all I can think.
Any ideas?

Hi Jonny,
It is hard to reproduce this issue.
I’m uncertain whether it is related to the code or the product.
What I thought is to create a simple report, use the same way to open it.
If the issue is still occurred, the issue is related to the product. After that, I will move the thread to Technet forum for more effective responses.
If the issue is not occurred, would you mind sharing a simple sample for us to reproduce the issue through SkyDrive?
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Send Issues with Outlook for Mac (2011 / V15) and Exchange 2013 SP1

Hi all,
we have a strange issue with only with Outlook for Mac Users (version 2011 and the newest Outlook Version (V15) from Office 365) connected to our Exchange Server 2013 SP1. Some emails which we send out to the exactly same recipient are not sent through our
Exchange Server.
We have sent 8 emails with subject "test1, test2, test3...". Only test 3-6 was arriving to the recipient. The other emails are in the "sent" folder but it was not sent out through the Exchange.
What we can see with "Get-MessageTrackingLog" is, that the Recipients and MessageSubject are empty for these emails:
Timestamp Sender Recipients MessageSubject
25.02.2015 16:48:52 [email protected].. {}
25.02.2015 17:04:43 [email protected].. {}
25.02.2015 17:08:25 [email protected].. {[email protected]} test 3
25.02.2015 17:08:56 [email protected].. {[email protected]} test 4
25.02.2015 17:09:38 [email protected].. {[email protected]} test 5
25.02.2015 17:09:38 [email protected].. {[email protected]} test 6
25.02.2015 17:13:45 [email protected].. {}
25.02.2015 17:13:55 [email protected].. {}
We can still reproduce the issue on different Mac computers.
Thanks for any help in advance!
Thanks and best regards
Reto

Here is the mailheader form the successfully sent email:
Date: Wed, 25 Feb 2015 17:08:25 +0100
Subject: test 3
From: sender <[email protected]>
To: "'[email protected]'" <[email protected]>
This mailheader is from an email which was not sent out:
User-Agent: Microsoft-MacOutlook/15.6.0.150113
Date: Wed, 25 Feb 2015 16:48:52 +0100
Subject: test 1
From: sender <[email protected]>
To: [email protected] <[email protected]>
Interesting: Only the not received messages contains User-Agent string and have some quotation marks missing in the To field.

EBS Tables with relation for OBIA Report columns.

Hi Friends,
We are trying to find the required EBS Tables for the below tables of HR module report. Please find the tables in OBI query.
select sum(case when T91397.GROUP_ACCOUNT_NUM = 'CONT EXP' then case when T91707.OTHER_DOC_AMT is null then 0 else T91707.OTHER_DOC_AMT * T91707.GLOBAL1_EXCHANGE_RATE end else 0 end ) as c1,
sum(case when T91397.GROUP_ACCOUNT_NUM = 'EMP SUPP' then case when T91707.OTHER_DOC_AMT is null then 0 else T91707.OTHER_DOC_AMT * T91707.GLOBAL1_EXCHANGE_RATE end else 0 end ) as c2,
sum(case when T91397.GROUP_ACCOUNT_NUM in ('GEN PAYROLL', 'MKTG PAYROLL', 'R&D PAYROLL', 'SLS PAYROLL') then case when T91707.OTHER_DOC_AMT is null then 0 else T91707.OTHER_DOC_AMT * T91707.GLOBAL1_EXCHANGE_RATE end else 0 end ) as c3,
sum(case when T91397.GROUP_ACCOUNT_NUM = 'EMP BENFT' then case when T91707.OTHER_DOC_AMT is null then 0 else T91707.OTHER_DOC_AMT * T91707.GLOBAL1_EXCHANGE_RATE end else 0 end ) as c4,
sum(case when T91397.GROUP_ACCOUNT_NUM = 'COGS' then case when T91707.OTHER_DOC_AMT is null then 0 else T91707.OTHER_DOC_AMT * T91707.GLOBAL1_EXCHANGE_RATE end else 0 end ) as c5,
sum(case when T91397.GROUP_ACCOUNT_NUM = 'REVENUE' then case when T91707.OTHER_DOC_AMT is null then 0 else T91707.OTHER_DOC_AMT * T91707.GLOBAL1_EXCHANGE_RATE end else 0 end ) as c6,
T66755.PER_NAME_MONTH as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_GL_ACCOUNT_D T91397 /* Dim_W_GL_ACCOUNT_D */ ,
W_GL_OTHER_F T91707 /* Fact_W_GL_OTHER_F */ ,
W_STATUS_D T96094 /* Dim_W_STATUS_D_Generic */ ,
W_MCAL_DAY_D T300914 /* Dim_W_MCAL_DAY_D_Ent */
where ( T66755.ROW_WID = T300914.MCAL_DAY_DT_WID and T66755.PER_NAME_YEAR = '2009' and T91397.ROW_WID = T91707.GL_ACCOUNT_WID and T91707.DOC_STATUS_WID = T96094.ROW_WID and T91707.DELETE_FLG = 'N' and T91707.ACCT_PERIOD_END_DT_WID = T300914.ROW_WID and (T96094.W_STATUS_CODE in ('POSTED', 'REVERSED')) )
group by T66755.PER_NAME_MONTH
select sum(case when T299373.W_EMPLOYMENT_STAT_CODE = 'A' then T299423.HEADCOUNT else 0 end ) as c1,
sum(T299423.HEADCOUNT) as c2,
T100027.PER_NAME_MONTH as c3
from
W_MONTH_D T100027 /* Dim_W_MONTH_D */ ,
W_EMPLOYMENT_STAT_CAT_D T299373 /* Dim_W_EMPLOYMENT_STAT_CAT_D */ ,
W_WRKFC_BAL_A T299423 /* Fact_Agg_W_WRKFC_BAL_A */
where ( T100027.ROW_WID = T299423.SNAPSHOT_MONTH_WID and T100027.PER_NAME_YEAR = '2009' and T299373.ROW_WID = T299423.EMPLOYMENT_STAT_CAT_WID and T299423.CAL_MONTH_START_DT <= TO_DATE('2013-05-01 00:00:00' , 'YYYY-MM-DD HH24:MI:SS') )
group by T100027.PER_NAME_MONT
Of course, if we can go through back track like:
OBI <-- Infa PLP <-- Infa SILOS <-- Infa SDE <-- SDE Mappletes <-- Source Qualifier <-- Sql Query.
We are getting no.of tables for single obi table. But, we need only required tables for the above OBI queries for single report.
Please correct me if wrong and guide me with better approach..
Thanks in advance.. Appreciate ur inputs here.
Best Regards,
Raghu Nagadasari
Edited by: Raghava Nagadasari on May 1, 2013 5:30 AM
Edited by: Raghava Nagadasari on May 1, 2013 5:31 AM

I would say it is part of unit testing; writing ebs query, get results and compare with BI results and some times compare bi query to match some part of criteria.
I would say just understand the requirements and try to write it, it might take some time but it helps a lot.
Lineage docs might help some extend to know the source tables, check here
http://www.cool-bi.com/Ref/Ref.php
Edited by: Srini VEERAVALLI on May 1, 2013 9:44 AM

Peformance issue with iSetup for loading fnd_flex_value_norm_hierarchy recs

Hi
The customer site where I am working in currently has implemented isetup to load data from Hyperion DRM to Oracle GL. They are currently on 11i.AZ.F patch level.
The customer has constantly had problems in two areas with iSetup -
1. iSetup has a limitation that all existing children records plus new ones being added have to sent in the XML file provided as input to iSetup. For eg. one parent ENTXXX might have 15000 children records i.e records in FND_FLEX_VALUE_NORM_HIERARCHY. Now when 2 children are removed from this parent in Hyperion DRM and these two records sent to Oracle iSetup for getting deleted from the parent, the current implementation stipulates that iSetup requires in the XML input file the remaining 14998 records. Thats how it knows to remove the two nodes. This is a huge performance issue.
They are looking at loading into iSetup only the two deleted nodes with an action code of DELETE and let iSetup handle this rather than having to provide the entire list of children less the removed nodes for iSetup.
2. Can we load using the final xml file directly by calling any Java class/process directly rather than going through iSetup Loader Concurrent Request?
3. Is there any documentation on how to use the isetup Java classes?
Will upgrading to 11i.AZ.H patch level solve any of the above concerns/issues?
Regards,
Richard

#1. I guess, you are referring to the problems that you are encountering while loading GL COA. You may log SR against GL to know more details on how API loads data to instance. DELETE is a specific requirement in your case and I would suggest you to work with GL team and they may provide some solution or workaround to overcome this performance issue.
#2. No, concurrent program does good amount of pre-processing that you would not get if you directly call the java classes.
#3. Not sure, what you are exactly looking at. Are you looking for user guide to write your own iSetup API classes?
11i.AZ.H has got good amount of performances fixes overall and it is recommended release on top of 11.5.10.2CU. I would suggest you to upgrade to 11i.AZ.H.
Specific to GL COA issue, I don't think 11i.AZ.H would really help you much. It is very much functional issue with respect to API and you have to work with GL team to get workaround/solution. This may involve customizing the API according to your requirement.
Thanks
Mugunthan.

Facing issue with POE for WS-X4648-RJ45V+E module on 4500

                 Hi guys,
My peo module WS-X4648-RJ45V+E i on 4506 is getting faulty i.e the desktops are getting connected but the module is not able to deliver power to the ip phone.
I tried and replaced the module but it worked for some time and again got faulty.This way my three modules have gone faulty even I tried and changed the slot but no results.
I am not able to trace out whether this issue is with some phones connected on the moudle.
thing is the show power commands o/p seems to be normal, once the power over limit logs are getting generated prior to the failure of POe on the module.

Hi vinod,
I 'm having the same problem with 4506E switch with cat4500e-entservicesk9-mz.122-54.SG.bin, and line cards
WS-X4648-RJ45V+E.
something weird because the ports that have problems are in card # 3, and the number of ip phones is low
Did you clear this issue??
SW_CORE#sh power inline module 2
Available:796(w) Used:299(w) Remaining:497(w)
Interface Admin Oper            Power(Watts)     Device              Class
                            From PS    To Device
Gi2/1     auto   off        0.0        0.0        n/a                 n/a
Gi2/2     auto   on         12.9       12.0       IP Phone 7945       3
Gi2/3     auto   on         12.9       12.0       IP Phone 7945       3
Gi2/4     auto   on         6.8        6.3        IP Phone 7942       2
Gi2/5     auto   off        0.0        0.0        n/a                 n/a
Gi2/6     auto   on         6.8        6.3        IP Phone 7942       2
Gi2/7     auto   off        0.0        0.0        n/a                 n/a
Gi2/8     auto   off        0.0        0.0        n/a                 n/a
Gi2/9     auto   off        0.0        0.0        n/a                 n/a
Gi2/10    auto   off        0.0        0.0        n/a                 n/a
Gi2/11    auto   on         6.9        6.4        IP Phone 8945       2
Gi2/12    auto   off        0.0        0.0        n/a                 n/a
Gi2/13    auto   on         6.8        6.3        IP Phone 7962       2
Gi2/14    auto   on         6.8        6.3        IP Phone 7942       2
Gi2/15    auto   on         6.8        6.3        IP Phone 7942       2
Gi2/16    auto   on         6.8        6.3        IP Phone 7942       2
Gi2/17    auto   on         6.5        6.0        IP Phone 6921       2
Gi2/18    auto   on         6.8        6.3        IP Phone 7942       2
Gi2/19    auto   off        0.0        0.0        n/a                 n/a
Gi2/20    auto   on         6.8        6.3        IP Phone 7962       2
Gi2/21    auto   on         6.9        6.4        IP Phone 8945       2
Gi2/22    auto   off        0.0        0.0        n/a                 n/a
Gi2/23    auto   off        0.0        0.0        n/a                 n/a
Gi2/24    auto   on         6.9        6.4        IP Phone 8945       2
Gi2/25    auto   off        0.0        0.0        n/a                 n/a
Gi2/26    auto   off        0.0        0.0        n/a                 n/a
Gi2/27    auto   on         6.9        6.4        IP Phone 8945       2
Gi2/28    auto   off        0.0        0.0        n/a                 n/a
Gi2/29    auto   on         6.8        6.3        IP Phone 7942       2
Gi2/30    auto   on         6.5        6.0        IP Phone 6921       2
Gi2/31    auto   on         6.9        6.4        IP Phone 8945       2
Gi2/32    auto   off        0.0        0.0        n/a                 n/a
Gi2/33    auto   on         6.8        6.3        IP Phone 7962       2
Gi2/34    auto   off        0.0        0.0        n/a                 n/a
Gi2/35    auto   off        0.0        0.0        n/a                 n/a
Gi2/36    auto   on         6.5        6.0        IP Phone 6921       2
Gi2/37    auto   on         6.5        6.0        IP Phone 6921       2
Gi2/38    auto   on         6.5        6.0        IP Phone 6921       2
Gi2/39    auto   off        0.0        0.0        n/a                 n/a
Gi2/40    auto   off        0.0        0.0        n/a                 n/a
Gi2/41    auto   off        0.0        0.0        n/a                 n/a
Gi2/42    auto   off        0.0        0.0        n/a                 n/a
Gi2/43    auto   off        0.0        0.0        n/a                 n/a
Gi2/44    auto   off        0.0        0.0        n/a                 n/a
Gi2/45    auto   on         16.6       15.4       AIR-LAP1262N-N-K9   3
Gi2/46    auto   on         16.6       15.4       AIR-LAP1262N-N-K9   3
Gi2/47    auto   on         16.6       15.4       AIR-LAP1262N-N-K9   3
Gi2/48    auto   on         16.6       15.4       AIR-LAP1262N-N-K9   3
Totals:          26   on    226.5      210.6
SW_CORE#sh power inline module 3
Available:796(w) Used:299(w) Remaining:497(w)
Interface Admin Oper            Power(Watts)     Device              Class
                            From PS    To Device
Gi3/1     auto   off        0.0        0.0        n/a                 n/a
Gi3/2     auto   off        0.0        0.0        n/a                 n/a
Gi3/3     auto   on         6.5        6.0        IP Phone 6921       2
Gi3/4     auto   off        0.0        0.0        n/a                 n/a
Gi3/5     auto   off        0.0        0.0        n/a                 n/a
Gi3/6     auto   off        0.0        0.0        n/a                 n/a
Gi3/7     auto   on         6.5        6.0        IP Phone 6921       2
Gi3/8     auto   on         6.5        6.0        IP Phone 6921       2
Gi3/9     auto   off        0.0        0.0        n/a                 n/a
Gi3/10    auto   off        0.0        0.0        n/a                 n/a
Gi3/11    auto   off        0.0        0.0        n/a                 n/a
Gi3/12    auto   off        0.0        0.0        n/a                 n/a
Gi3/13    auto   on         6.9        6.4        IP Phone 8945       2
Gi3/14    auto   off        0.0        0.0        n/a                 n/a
Gi3/15    auto   off        0.0        0.0        n/a                 n/a
Gi3/16    auto   off        0.0        0.0        n/a                 n/a
Gi3/17    auto   on         6.9        6.4        IP Phone 8945       2
Gi3/18    auto   off        0.0        0.0        n/a                 n/a
Gi3/19    auto   off        0.0        0.0        n/a                 n/a
Gi3/20    auto   on         6.8        6.3        IP Phone 7942       2
Gi3/21    auto   off        0.0        0.0        n/a                 n/a
Gi3/22    auto   off        0.0        0.0        n/a                 n/a
Gi3/23    auto   off        0.0        0.0        n/a                 n/a
Gi3/24    auto   off        0.0        0.0        n/a                 n/a
Gi3/25    auto   on         6.5        6.0        IP Phone 6921       2
Gi3/26    auto   off        0.0        0.0        n/a                 n/a
Gi3/27    auto   off        0.0        0.0        n/a                 n/a
Gi3/28    auto   off        0.0        0.0        n/a                 n/a
Gi3/29    auto   on         6.5        6.0        IP Phone 6921       2
Gi3/30    auto   off        0.0        0.0        n/a                 n/a
Gi3/31    auto   on         6.8        6.3        IP Phone 7942       2
Gi3/32    auto   off        0.0        0.0        n/a                 n/a
Gi3/33    auto   off        0.0        0.0        n/a                 n/a
Gi3/34    auto   off        0.0        0.0        n/a                 n/a
Gi3/35    auto   off        0.0        0.0        n/a                 n/a
Gi3/36    auto   off        0.0        0.0        n/a                 n/a
Gi3/37    auto   off        0.0        0.0        n/a                 n/a
Gi3/38    auto   off        0.0        0.0        n/a                 n/a
Gi3/39    auto   off        0.0        0.0        n/a                 n/a
Gi3/40    auto   on         6.9        6.4        IP Phone 8945       2
Gi3/41    auto   on         6.5        6.0        IP Phone 6921       2
Gi3/42    auto   off        0.0        0.0        n/a                 n/a
Gi3/43    auto   off        0.0        0.0        n/a                 n/a
Gi3/44    auto   off        0.0        0.0        n/a                 n/a
Gi3/45    auto   off        0.0        0.0        n/a                 n/a
Gi3/46    auto   off        0.0        0.0        n/a                 n/a
Gi3/47    auto   off        0.0        0.0        n/a                 n/a
Gi3/48    auto   off        0.0        0.0        n/a                 n/a
Totals:          11   on    72.9       67.8
SW_CORE#
SW_CORE#sh power mo
SW_CORE#sh power module
                             Watts Used of System Power(12V)
Mod   Model                 budgeted instantaneous peak   out of reset in rese
t
1    WS-X45-SUP6L-E           200         --        --        200         200
2    WS-X4648-RJ45V+E          92         --        --         92          10
3    WS-X4648-RJ45V+E          92         --        --         92          10
--   Fan Tray                 120         --        --        --          --
       Total                   504         --        --        384         220
                        Watts used of Chassis Inline Power (-50V)
                        Inline Power Admin Inline Power Oper
Mod   Model                PS     Device       PS     Device     Efficiency
1    WS-X45-SUP6L-E           -        -          -        -           -
2    WS-X4648-RJ45V+E       226      211        117      109          93
3    WS-X4648-RJ45V+E        73       68         44       40          93
       Total                 299      279        161      149
SW_CORE#

Issues With Save For Web CS6

I'm having some issues with my file when trying to Save For Web. A band of transparency appears above my image even though I have everything cropped to the artboard, and the artboard is exactly the size I want the final image to be. If I uncheck "Clip to Artboard" the band of transparency disappears from the top, but reappears on the right side. It seems as if the artboard area is calculated differently in the Save For Web screen; its slightly off. I've included some images so you can see the issue.
Trying to save for web as a .png with "Clip To Artboard" selected; a tiny (one pixel tall?) band of transparency on the top of the image.
Trying to save for web as a .png without "Clip To Artboard" selected; the image seems to shift and the band of transparency appears on the right size. Also some of the pieces of the image appear on the bottom outside of the artboard.
I made sure to crop each element of my image to fit exactly on the artboard. Previously, I had made sure to use a clipping mask exactly the size of the artboard and still had these issues. I would like my .png to not have a band of transparency. It has the same issue when I change it to .jpg, but instead has a white matte band. What am I doing wrong, or is this just an issue with Illustrator? Thanks in advance!

Depending on your use of the image in context, won't the transparent strip "disappear?"
The only solution I know is to open it in Photoshop and manually crop out the transparent strip. AI or Save for Web also seems to antialias the edge of free-standing art over a transparent background. I just make the artwork slightly larger than the final cropped size, save for web, then crop in Photoshop.

Issue with Validation for some report parameters

Similar Messages

Maybe you are looking for