Issues connecting to a SQL Anywhere repo from the Designer

I have installed DS4.2 SP2 on a number of Suse 11.1 Linux VMs using all of the standard settings, and making use of the bundled SQL Anywhere database as my repo.
I am getting an error in the Designer when I try to connect to certain repositories in the Login screen, but the problem is not happening on all installations.
The error is an ODBC message:
ERROR: ODBC call <SQLDriverConnect> to connect database <DS_REPO> failed with error: <[Sybase][SQL Anywhere]Database server not found>. Use the ODBCDriverSelector (Windows) or DSConnectionManager,sh (UNIX) utility in LINK_DIR/bin to configure the correct version of the driver.....(BODI-1112172)
I have checked both the ODBCDriverSelector on the machine running the Designer and DSConnectionManager on the server, and the drivers are all correct for SQL Anywhere 12. I can also successfully connect to the database from the Windows Repository Manager - the only problem is with the Designer.
I have tried adding an ODBC entry in the System DSNs for the repo database, and again I can successfully test the connection - but this hasn't fixed my issue, and the Designer can connect (when it can connect) even if a DSN isn't defined.
I'd appreciate any thoughts or advice.

I have a solution - in the CMC, set the repo to use DNS. You need to first create an appropriate entry in the <install dir>/sap_bobj/enterprise_xi40/odbc.ini and then create an equivalent entry on your client ODBC settings.

Similar Messages

How do I transfer all photos and music from my old iphone 3gs to new iphone 4s? I have a new laptop because the old one broke and so do not have non camera roll photos or music stored anywhere apart from the iphone 3gs and cannot update io5 on the iphone

How do I transfer all photos and music from my old iphone 3gs to new iphone 4s? I have a new laptop because the old one broke and so do not have non camera roll photos or music stored anywhere apart from the iphone 3gs and cannot update io5 on the iphone 3gs without erasibng everything. i need help!!!

Syncing to a new iTunes library or computer will erase your phone. Only if you back up manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your device without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPhone for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved:iTunes: About iOS backups
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device

An FTP Error occured - cannot make connection to host. No response from the server

"An FTP Error occured - cannot make connection to host. No response from the server".
As of today this is all i get when trying to connect to every single ftp account i have. It's not the server cause it's every one and there is several different. Tried passive and non-passive same result. I've connected fine with other FTP clients. So this must be another dreamweaver bug. Anyone know what to do?

Very hard to diagnose these problems, particularly as you can connect using a 3rd party program.
See if the 'timeout' issue could be at play here:
http://forums.adobe.com/message/708941#708941

Database Connection Error: Cannot obtain error message from the server

I have a SQL statement that wants to add a temp table to the database.   The SQL statement works fine but when I try to add it via 'Add Command' feature in Crystal XI R2, I get the following error message:
Database Connection Error: Cannot obtain error message from the server
Any ideas?
Thanks in advance,
Zack H.

Hi Raghavendra,
I am using this in the 'Add Command' feature but I get the error message displayed in the subject line:
CREATE TABLE #TibetanYaks(
YakID char(4),
YakName char(20) )
INSERT INTO #TibetanYaks (YakID, YakName)
SELECT LastName, FirstName
FROM      Employee
WHERE      EmployeeID between '2000' and '3000'
I haven't tried to add this as a stored procedure but I imagine it will work as I have no problems yet with stored procedures. I simply want to be able to use temporary tables for the sole purpose of that session and not creating anything static in the database.
By the way, even though I get the error message, when I look on the backend database, I see that the temporary table was successfully created...its just not brought across correctly in Crystal.
Any ideas?
Zack H.

TS1363 my iphone 4 doesnt show up in itunes. it is also locked on the 'connect to itunes screen' when unplugged from the computer. help me!

my iphone 4 doesnt show up in itunes. it is also locked on the 'connect to itunes screen' when unplugged from the computer. help me!

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

How is the album and folder connected and when I delete photos from the album it also deletes from the folder?

How is the album and folder connected and when I delete photos from the album it also deletes from the folder?

In what application? iPhoto? If so: what version?

WARNING:Xst:1290 - Hierarchical block is unconnected in block core . It will be removed from the design.

Hi ,
I have been using ISE for some time. However suddenly without any changes to the design, when I tried synthesis today i got many errors liek the following :
WARNING:Xst:1290 - Hierarchical block <credit_sync_wrapper_I> is unconnected in block <core>.
It will be removed from the design.
Is there any way to prevent ISE from freely removing blocks even though they are clearly connected by signals which can change in any clock cycle. Perhaps a global setting for preventing such optimizations ?

anandy wrote:
Hi ,
I have been using ISE for some time. However suddenly without any changes to the design, when I tried synthesis today i got many errors liek the following :
WARNING:Xst:1290 - Hierarchical block <credit_sync_wrapper_I> is unconnected in block <core>.
It will be removed from the design.
Is there any way to prevent ISE from freely removing blocks even though they are clearly connected by signals which can change in any clock cycle. Perhaps a global setting for preventing such optimizations ?
In general, XST will only remove logic that does not affect any outputs of the overall design.
It is unreasonable that XST would "suddenly without any changes to the design" rip out logic
that was included in a previous build. You are re-running XST, so something must have
"changed in the design." You could instruct XST to leave it all in, but you would then end up with
a design that has more logic, but no more functionality that the one that left it all out.
The most common reasons for large sections of a design to suddenly get ripped out are
missing clocks or constantly asserted resets. Either of these will cause all the downstream
logic to get replaced with constants, and hence ripped out of the design.
-- Gabor

TS3999 I am unable to sync my Outlook calendar with my Iphone. I have noted that the Icloud Outlook add in is not ticked When I attempt to load it from the designated file nothing happens Can anyone help with this? Robyn

I am unable to sync my Outlook calendar with my Iphone. I have noted that the Icloud Outlook add in is not ticked When I attempt to load it from the designated file nothing happens Can anyone help with this? Robyn

Re: check that the appointments in my phone are going into iCloud calendars....exactly how do I do this? I fear this is a really stupid question!
My iCloud account is set up with my Apple ID as one email account (for example [email protected]) which is the email account I use to sign up for internet sites like Amazon, Apple,etc, so that I can differentiate vendors/mass emails. But my default calendar on my iPhone is in a different email name (ie [email protected]) which I use for most communications to friends, relatives, etc. and it is this account that holds most of my appointments. To further complicate things I have other email accounts that I use for business/professional and community work. If I want all my calendars to show on my iPhone AND sync to my iCloud, do I set this at the phone level or the iCloud level? or both?
Let me clarify....It looks like if I go into appointments that I previously set up through my personal account (ie above [email protected]) and edit the entry on my iPhone, selecting the iCloud "home" calendar within the entry, it will then sync to my iCloud account, no problem....do I have to do this to EVERY entry I have? or is there a way to name my personal account as one to sync to iCloud?

Connect to Sybase SQL Anywhere from a remote location.

BH
Hi, we are running SQL Anywhere 16. Currently our client computers are connecting through ODBC. Is there a way to connect to our server from a Remote Location (over the internet)? If yes, how?
Thanks
Aron

Hi Aron,
Is there a way to connect to our server from a Remote Location (over the internet)?
Yes, there is.
If yes, how?
You will need to supply a HOSTNAME (or direct IP) and PORT to the server running the network database server, communicating over TCP (Note: This may involve opening a TCP port on your firewall to provide a direct TCP route). For the SQL Anywhere client, this information can be set in the ODBC DSN entry as the following screenshot shows:
Note that this is unencrypted traffic across TCP/IP, by default.
If this communication is over the Internet, using an unencrypted channel directly to the database is not recommended. Instead, we would recommend that you also configure Transport Layer Security (TLS) with strong encryption enabled using a certificate (either self-signed or provided by a Certificate Authority (CA)). To do this, you need to create the certificates and then start the SQL Anywhere database server with the (private) server-side identity certificate.
Once the database server is started, you will then need to configure the client for secure communication with the public certificate. When configuring Transport Layer Security on the ODBC client, the security settings (e.g. trusted_certificates, certificate_unit, certificate_company, certificate_name) can be entered on the "Network" tab:
Regards,
Jeff Albion
SAP Active Global Support

Connecting Discoverer to SQL Anywhere database via ODBC

I am trying to connect Discoverer to a SQL Anywhere Database using ODBC. I am using the following parameters:
Username: ODBC:DSN name
Password: I have tried every combination of username/password
Connect: Blank
The DBclient will launch, and I get an invalid username or password. Does anyone know the correct syntax and where I should be putting the username and password?
Any assistance will be appreciated.

Tom,
The ODBC driver manual should provide the configuration steps required.
The ODBC driver will use the username/password that was used when the database link was created to connect to SQL Anywhere.
Vira

R/3 connection to BIW - No Idocs arrived from the source system

Question,
Hi Team,
I have issues during loading attribute data from R/3 source system to BI,
I go to the path
Data Warehousing Workbench - Modeling window. In the DataSources view, my application component Group ##. On my DataSource i Create Info Package and save it,
Later I select the following options
Full Update = select
On the Processing tab page, select only PSA.
On the Schedule tab page, choose Start Data Load Immediately and start the data load.
Till here everything is in active version and saved, and connection to the source system is active and working fine.
However when I do loading I received following messages, what I observed in Monitor window,
Data was requested OK
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system.
When I go to detail tab, under transfer section, I receive the following message
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
But when I actually go to PSA maintain section and select data and no of records, I can see the that data is loaded into PSA section,
But when I chose to run the transformation I donu2019t get data here,
Kindly help me to resolve this issue,
Regards,
BluSKy

Hi,
the BIW i am using , its compact BIW, which is in EXI, and i execute transaction /nrsa1 to go biw development workbench,
i am not sure about transactions settings about r/3 side,
could you plz throw some light on this issue,
regards
blusky

After an update to OS 10.9 Maverick my Epson WF2540 no longer connects to WiFi. Any solutions from the community here?

April 1. ( and no, this is not an April fools joke!! ) I uploaded the newest OS Maverick 10.9 a week ago. Since then my Epson WF 2540 printer scanner does not connect to the Mac. I have tried everything I know, and looked for solutions online, but still, I cannot use my printer, which is only 3 months old! Now what? are there new upgrade drivers to the MAverick already available... and where?

The Epson web site states that is fully supported in Mavericks using the Apple Software update and the Epson software. Download the Epson Scan software if you are using a version older than November 2013 and confirm your Mavericks is upto date, latest version 10.9.2.
You could then try removing the printer from the Printers set up on the Mac and reinstalling it.

TS1559 mini Ipad not connected to WIFI when Im away from the cisco 3825

mini Ipad looses connection to cisco 3825 when im just about 30 ft. from the computer

Follow the troubleshooting steps here: http://support.apple.com/kb/ts1398

Is it possible to trace users sql query disconnected from the session

One of my users used to run the sql query daily, Now her machine rebooted and she lost all the sql query. is there any way to trap the sql what she used to run? I have the os/sql username....
thx

user587112 wrote:
Yes we are using 10.2.0.3. main requirement of user is all the sql query she used to run.To get this query she is giving me her os user.And says why it is not possible?What would that be possible? If this database is reserved for her only that could be possible.
Once she lost her session, there's no reliable method to trace all her SQL queries. The SID will be reused by Oracle, her SQL could be flushed out of shared pool, consider Oracle is designed to tackle with thousands of queries per seconds there's no feasible way to save all these information without impact on performance.
So unless you had sql trace turned on her session or the database is reserved for her use only, then no it's not possible to retrieve all her SQLs and guarantee it. You might be able recover some of SQL from the mentioned DBA views but no guarantee what so ever.
PS. it's no guarantee to get all her SQLs even her session is still active, unless SQL trace were turned on.
Edited by: yingkuan on Jan 13, 2009 11:48 AM

Issues connecting to a SQL Anywhere repo from the Designer

Similar Messages

Maybe you are looking for