Issues during creation and maintenance of BOM using FM's

I am facing problems while using FM's BAPI_MATERIAL_BOM_GROUP_CREATE , CSAP_MAT_BOM_CREATE .
   Previously i was using CSAP_MAT_BOM_CREATE but it did not support creation of another alternative bom if there already exists one for the same material,plant,usage.
   So i started using BAPI_MATERIAL_BOM_GROUP_CREATE. This bapi supports creation of alternative BOM's but i have a requirement that i need to create items with a specific item id.
   The Bapi's interface has a item table which has a field item_id which i am filling up but internally this bapi converts it into a structure using FM 'MAP2I_BAPI1080_ITM_C_TO_ITM_CL.'
   But this FM does not transfer the item_id from the bapi's structure into the internal structure field ident. The FM being called from this bapi for creating items - CS_CL_S_ITM_CREATE uses this ident field for updating item id in an item but this field is empty.Do you have any idea how this issue can be resolved ?
   Also similar to BAPI_MATERIAL_BOM_GROUP_CREATE i was not able to find a BAPI for changing an existing BOM.Currently i am using CSAP_MAT_BOM_MAINTAIN.
   Can anyone please help me out with these issues .

To enable and protect the variant maintenance of a report, it needs an S_PROGRAM group on it (see report RSCSAUTH).
Via S_PROGRAM p_action = 'VARIANT' those users can then maintain the variants AND also submit the reports via report trees or transactions (including SA38 for example).
To make the variant user specific for maintaining it but not restricting the ability to use it, take a look in transaction VARCH at the "Protection" flag (this is user specific then, for the current user who sets the flag first).
Also see the SAP notes and discussions here about report RSVARENT - for globally unlocking the protection (to be used and protected itself with caution).
To lock them down beyond the reach of the user's normal authority, you can also create custom system variants in client 000.
Cheers,
Julius
Edited by: Julius Bussche on Jan 13, 2009 6:07 PM

Similar Messages

Issue during creation of control cycle

Dear Gurus,
During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
I compared control cycle in a different ECC system where source information is appearing.
How can make the screen appear in my ECC system.
Please find the screenshot.
Any pointers will be highly appreciated.
This thread is further to the thread in Production Planning Forum
http://scn.sap.com/thread/3609441
With Regards,
Malay

Manish,
I do not understand how this going to solve the issue because why we need both KANBAN and WM control cycles for one material withdrawal for production?
Br
KK

Issues during posting and Clearing together in custom code SAP FICA

Hello Experts,
We have a custom functionality for credit card refunds. For account update during refunds a new debit document is created and force cleared with the credit card payment posted earlier on customer account. Logic for posting the debit document and clearing it with an already existing payment is in the same RFC Function module. Once the document is posted code issues COMMIT work and then goes for clearing.
We are facing intermittent failures during this process. Clearing fails to happen on some accounts.
Can this be because we are trying to do two types of database update on same document( i.e., creation and then clearing)?
Kindly advice.
Thanks,
Josep

Hi Josep,
Same situation was faced by me in custom RFC FM,
so as a solution i put a wait of 2 second after debit document was posted and then credit card payment was executed after wait, moreover one more thing to be taken care is that while posting the debit document system apply some locking entry so if possible clear the lock entry and then start credit card payment.
Hope it helps.
Thanks

Issue during drag and drop in vb

Hi Uwe,
I want an urgent help on the following scenario.
When i do a drag and drop anywhere on vb other than a link or spot.The screen freezes and when i try to do at lead selection on any of the FPM objects at the same time I get an assert condition violated dump.After my analysis I think its still possess the drop event when i try to do any other action on fpm at same time.This issue is happening for me in ie11 but for ie10 its working fine.
Please suggest some remedy!
Thanks
Siju

Hello Siju,
I am aware of multiple issues with drag and drop in the context of VB embedded in FPM/WD. In order to sort this out correctly and get the right solution I suggest to open a support ticket on BC-WD-CMP-FPM.
Best regards,
Uwe

Issue in Creation of shipment with events using BAPI_SHIPMENT_CREATE

Hello experts,
I am trying to create shipments using BAPI_SHIPMENT_CRETAE for which data is provided in an excel.
The issue here is I have to create the events in shipment i.e., I need to fill the Further dates tab. But in this BAPI there is no such structure or field which can take the input and create an entry in this tab. Please let me know if we can do this using this BAPI .
Also let me know if there are any other bapi's for shipment creation or the only way is to go for BDC.
Thanks.

Hi,
The BAPI_SHIPMENT_CREATE can't upload further dates, partners etc.
You can try below options.
1. Use BAPI to create basic shipment and update further dates data through BDC(VT02)
2. Create shipment using BDC(VT01)
Regards
Praveen

WM goods issue TO creation and TO confirmation understanding.

Dear all,
i am using WM in context of PP transactions.
my transaction flow is as below
CO01- PRODUCTION ORDER CREATION.
CO15- ORDER CONFIRMATION (AUTO GOODS ISSUE AND GR- SLOC- 00014 wm managed) IM is executing correctly for goods movemnt.
LB12- TO CREATION.
REQURIED help in understanding below scenario.
stock is available in storage bin 500 ea
created TO for both 101 and 261 TR
production order qnty 100 ea
TO created and if viewed stock in LS26 it showing available stock is zero, once i confirm TO remaining stock of 400 is shown.
my query is instead of 0 why it is not showing 400 before confirmation. 500 ea is shown in putaway after confirmation remaining stock is available
is any customizing remaining for same.

Hi manish,
pls find below details,
Scrn-1-toce- LS26        Stock available in sloc- 0015 - 49,984
                                                                 Putaway stock – 100,491
SCRN-2 TR number generated for GR and GI.
TO created with LB12
SCRN-3- .NOW before confirmation TO (LT12)checking goods issue stock it is ‘0’and
entire stock is moved to putaway stock.
Stock available in sloc- 0015 -    0
           Increased putaway stock - 150,455.
Due to this next TO is not created for 261 as stock is zero.

How to fix Action Link Issue in Table and Pivot Table when used Section

My OBIEE Version: OBIEE 11.1.1.6.5
Issue Description: Action links (Navigate to BI Content) doesn't work in PIVOT TABLE or TABLE object when used Section area (one or more columns in Section area).
If you want to recreate this issue please follow next steps:
1.     First of all you have to create one analyse with min 3 columns (for example Time.“Calendar date“, Product.Product, „Base Fact“. Revenue -> from Sample Sales Lite )
2.     From column properties -> Set value Action Link Interaction on some column for example Product.Product (choose Navigate to BI Content -> any created BI report )
3.     Click Results Tab choose Pivot Table and assigned one dimension column to Section area
4.     Click preview icon
5.     When you click on action link nothing happens
6.     If you drug and drop column from Section Area to Excluded, Table or Pivot table Area then Action Link works perfectly
How to fix this issue?
I'll be grateful for any help!

This is Bug:15922681 - ACTION LINK NAVIGATE TO BI CONTENT DOES NOT WORK WITH ATTRIBUTE IN SECTION
Upgrade to 11.1.1.6.6 will fix this issue.

What are management issues when Principal and DR mirroring environments use different drive letters. 2008R2 Enterprise Edition.

I have to build a DR environment. The drive letters on principal are different than I HAVE to use on new DR server. Is 2008R2 mirroring able to handle that difference in drive letters. And what are the complexities for managing this setup and failing over
from principal to DR? Thank you for your reply!

You can handle database Mirroring with difference in drive letters.
The mirroring is not centralized on drive letter but there will be some issues when you add a file to a PRINCIPAL, the DDL gets applied across mirror, then your database will go into suspended status until you duplicate the path on the mirror.
Its recommended to have same identical configuration.
You can refer the below link
http://www.extremeexperts.com/sql/articles/DBMirroring2.aspx
http://blogs.msdn.com/b/suhde/archive/2009/07/13/step-by-step-guide-to-configure-database-mirroring-between-sql-server-instances-in-a-workgroup.aspx
http://sqlserverperformance.wordpress.com/2012/03/12/sql-server-database-mirroring-tips-and-tricks-part-1/
-Prashanth

Issue during migrating from Sybase to Oracle using Oracle SQL Developer

I am using SQL Developer v 3.2.20.09 to migrate from Sybase to Oracle Pl/SQL 12c
While migrating the stored procedure the following block did not convert. I got NULL instead of object_id:
Sybase Block:
IF OBJECT_ID(‘dbo.CheckEst’) IS NOT NULL
BEGIN
DROP PROCEDURE dbo.CheckEst
IF OBJECT_ID(‘dbo.CheckEst’) IS NOT NULL
PRINT ‘<<>>’
ELSE
PRINT ‘<<>>’
END
Oracle Block after conversion:
BEGIN
IF NULL/*TODO:OBJECT_ID(‘dbo.CheckEst’)*/ IS NOT NULL THEN
BEGIN
DROP PROCEDURE CheckEst;
IF NULL/*TODO:OBJECT_ID(‘dbo.CheckEst’)*/ IS NOT NULL THEN
DBMS_OUTPUT.PUT_LINE(‘<<>>’);
ELSE
DBMS_OUTPUT.PUT_LINE(‘<<>>’);
END IF;
END;
END IF;
END;
Lines 1 & 4 got converted to NULL. I have many places where such code is written.
Is there any quick way to overcome such an issue? or what needs to be done in such case?

Hi,
You are using an older version of SQL*Developer. Could you download the latest 4.0.2 version available from here -
Oracle SQL Developer
and check if you still have the problem ?
Regards,
Mike

Customer master creation and maintenance

Hi All,
I have a question regarding customer master. The client is implementing FSCM credit and collections management. Initially, all the existing customers in AR are mapped or loaded to SAP Business partner using the functions available (I dont remenber on top of my head but i know we can do that).
Now my questions are,
1. When creating a new customer later some point, do we have to create in AR and then establish the relationship to SAP Business partner. Or directly create as SAP Business partner.
2. If to be cretaed both in AR and as Business partner, this would be kind of duplication or maintaing in 2 seperate places. Please explain the reason behind it.
3. If only to be created as Business partner, will all the fields available in Customer master (like business area, accounting clerk, Industry field) be available in Business partner
one more question, We can automatically import credit data from External Credit Information service. Can we push the data from our system to the Provider like the payment data or anything for that matter. Client has a requirement for this to send data to provider and I am not sure. Please confirm.
I know there are too many question, but please help me undertsand this more better.
Regards,
Satya

I am sorry about that but first 3 questions are related and linked.
I understand that a link is established between AR customer data and BP's and this will migrate all data. But the data will be in AR and will be copied to BP..right.
Likewise, if you create a customer in AR, it will create a BP...will this be done automatically?
And later if we want to create a new customer, do we need to do in AR and this will automaticall create a BP? Is this not duplication. I know that BP are maintained centarlly and for master data synchronization.
Regards,
Satya

PDF Creation and Saving in Database using Apache FOP

Hi,
I read lot of topics in this forum about using Apache FOP for creating PDF documents and I have configured the same and works fine.
When user clicks a button, the PDF file is generated and it downloads the document. How can I make the PDF document save in the database.
I would like to provide a interactive report with a link and they can download the document later.
Thanks
Karthik

Hi, Karthik
Think here how to save pdf in APEX 3.0 you can find more information about this
Michael

Facing issues with R12 and SOA 11g integration using Business events

Hi,
I am trying to integrate R12 application with Fusion using 11g SOA suite. I configured BES in R12 application and I am able to raise a business event and query it from WF_BPEL_Qtab. I have an Oracle applications adapter listening for the same event in SOA composite deployed over a server. I have verified the DB connection and schema for R12 application in 11g SOA server. However, no SOA instance is being generated. No server log as well.
I understand that 11g SOA uses EDN (using fusion_edn schema) for business events. Are there any changes expected to be done to Oracle Apps adapter to ensure the event is received.
P.S. Oracle apps adapter configuration is probably correct as the out bound calls are taking place correctly.
Thanks,
Sagar

Hi,
Can you check the log file.u are getting any error.can you check wf_error table also u are getting any error.
Can you check consumer in AQ tables.
Thanks,
Rahul

Facing issues with Oracle11i and SOA 10g integration using Business events.

Hi ,
I have created a custom business event and have added subscription for the same.
When i am triggering a business event, event is raised and the event data is getting inserted in the Queue (AQ).
In SOA i have created an OracleApps adapter that is listening to the queue ,
but the Oracleapps adapter is not getting started even though there are data in the queue.
I checked the WSDL file of Oracleapps adapter and there i can see there is field Consumer with some code.
I have added the code snippet from Oracleapps adapter wsdl.
<pc:inbound_binding />
<operation name="DEQUEUE">
<jca:operation
ActivationSpec="oracle.tip.adapter.apps.AppsWFBesQueueDequeueActivationSpec"
QueueName="WF_BPEL_Q"
DatabaseSchema="APPS"
Consumer="ORA_88p3cd9o74pj2cpg6p13cdhp75"
MessageSelectorRule="tab.user_data.event_name = 'xxc.oracle.apps.soa.demo'" >
</jca:operation>
I have checked the connection factory set up at loaction (application-deployments\default\AppsAdapter/oc4j-ra.xml)too and found it is correct.
code snippet from oc4j-ra.xml:-
     <connector-factory location="eis/Apps/Apps" connector-name="AppsAdapter">
          <config-property name="xADataSourceName" value="jdbc/EBSDataSource"/>
          <config-property name="dataSourceName" value=""/>
          <connection-pooling use="none">
          </connection-pooling>
          <security-config use="none">
          </security-config>
          <connectionfactory-interface>javax.resource.cci.ConnectionFactory</connectionfactory-interface>
     </connector-factory>.
Can anyone tell me where consumer for an event/queue is being defined in the Oracle apps.
Thanks & Regards
Saurav Kumar

Hi,
Can you check the log file.u are getting any error.can you check wf_error table also u are getting any error.
Can you check consumer in AQ tables.
Thanks,
Rahul

Availability check during creation and release

Hi Everybody,
I am need of your expertise, The requirement is "when I try convert planned order to production order for a sales document", I am getting error say " Error during availability check". When I check the log it says "No control data maintained for checking group XX and Checking rule $$".
Do anyone have any kind of idea, what is this control data about?
Thanks in advance.
Esh

Hi
Please go to spro
production >> shop floor control>> operation>> Availability check>> define checking rule
first maintain checking rule
go to T : code OPJK to maintain order control
Maintain checking rule
go to matl availablity , PRT check, Capacity check
U can see option tick on no avail check
ths may help u
Please reward points
Rgds
Sunil

Issue during creation of Transfer Order

I am trying to create a Transfer Order from a TR but I am getting the follwoin error.
"No destination storage bin to be found in storage type XXX "
I have assigned a storage type to a storage bin and the Putaway strategy exist in material master which is assigned to Storage type XXX.
Please tell me if I am missing any pat of master data or configuration.
Thanks
SAP Fans....

Possible cuase:
System is not able to search for any storage bin according to the putaway strategy u have maintained for the storage type.
Run LX03 report and find out list of storage bin in the storage type.
Choose an empty bin and put it manually in the TO.

Issues during creation and maintenance of BOM using FM's

Similar Messages

Maybe you are looking for