Issues with clone of database from PROD to non-prod

Hi All,
I am trying to clone the production database to a non-prod database.This used to work fine with out any issues before.Only change made on the backup side is we change the compress option to nocompress.Below are the steps followed for the clone process.
Create a new init parameter file.
Started the database in nomoutn state
Connected to prod database through rman
connected to auxiliary database(non-prod)
connected to catalog
Set the new file destinations in ASM for the non-prod database.
Set the recovery time until the last SCN on the full backup.
Here is the error encountered during the process of restore.
ORA-19870: error reading backup piece /exp/prod_backup/emrepdb_0_PROD_20101114_ublt0vq6_1_1
ORA-19502: write error on file "+STG_DATA/stage/datafile/undotbs3.dbf", blockno 2641537 (blocksize=8192)
ORA-27061: waiting for async I/Os failed
Outer dbms_backup_restore.restoreCancel() failed
ORA-19870: error reading backup piece /exp/prod_backup/emrepdb_0_PROD_20101114_ualt0vq5_1_1
ORA-19502: write error on file "+STG_DATA/stage/datafile/undotbs4.dbf", blockno 1044817 (blocksize=8192)
ORA-27061: waiting for async I/Os failed
Outer dbms_backup_restore.restoreCancel() failed
Any one faced the same kind of issues before?

Hi,
ORA-19870: error reading backup piece /exp/prod_backup/emrepdb_0_PROD_20101114_ublt0vq6_1_1here is problem with execute permissions on the backup location, give full permission to open those backup sets and read...
post
ls -ltr /exp/prod_backup/emrepdb_0_PROD_20101114_ublt0vq6_1_1give full permissions like *777*
#chmod 777 -R /exp/prod_backup/*
Thanks

Similar Messages

How to create a clone of database from STANDBY?

How can i clone a database from physical standby database?

Steps to clone from standby:
1. cancle the managed recovery process on standby
sql>alter database recover managed standby database cancel;
2. Remember your standby databse would be in mount mode.
3. Connect to the auxiliary instance and to the standby database through RMAN
rman target sys/<pwd>@standby auxiliary sys/<pwd>@auxiliary-connection
4. If 11g, then run directly duplicate from active database
rman>duplicate target database to 'auxiliary_db_name' from active database nofilenamecheck;
5. Once, the duplication is done, start the MRP on the standby again
sql>alter database recover managed standby database disconnect from session;
Ok..You are on 10g.
Perform the above steps, but only thing is 1st you need to take the backup of the standby database first.
Refer this Create dev database from standby database
Already steps are given here
Edited by: Shivananda Rao on Mar 9, 2012 9:56 AM

Issue with Executing OS commands from Stored Procedure

I am trying to execute the scripts provided at :
http://github.com/xtender/XT_SHELL
provided by xtender user.
As required, I have asked my DBAs to grant privileges by executing the following scripts:
Begin
--change to needed permissions and execute
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/factiva/ODS/bin/CVIM_Rpt_ExportCSVFile’, 'read,write,execute' );
end;
/where CVIM_Rpt_ExportCSVFile is my script residing in the Unix server where my Oracle is installed.
The error I am facing when I try to execute the following command is:
select * from table(xt_shell.shell_exec('/var/scripts/CVIM_Rpt_ExportCSVFile',100))
Exception:the Permission (java.io.FilePermission /var/scripts/CVIM_Rpt_ExportCSVFile execute) has not been granted to ODS. The PL/SQL to grant this is dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )I have asked my DBA to also execute the following scripts: - But I still see the same error as above. I am not able to figure out whats going on. Can anyone pls help me out??
EXEC Dbms_Java.Grant_Permission('ODS', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
EXEC Dbms_Java.Grant_Permission(ODS', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )

DUPLICATE
===============================================================
Issue with Executing OS commands from Stored Procedure
==============================================================

Is there an issue with streaming videos direct from itunes? I

Is there an issue with streaming videos direct from itunes? I have good wifi but films just buffer , doesn't happen on flixster on netflix , wonder if there is any tweak to watch a film uninterrupted , because it is very frustrating? Thanks

Apple appears to be having trouble with the iTunes Store servers right now.
(81070)

Duplicate database from ASM to Non-ASM problem

Friends,
I am unable to duplicate the database from ASM TO Non-ASM,
OS: Linux AS4
Oracle version: 10.2.0.1
initAUXDB.ora parameters:
background_dump_dest=/u01/oracle/product/10.2.0/admin/auxdb/adump
core_dump_dest=/u01/oracle/product/10.2.0/admin/auxdb/cdump
background_dump_dest=/u01/oracle/product/10.2.0/admin/auxdb/bdump
user_dump_dest=/u01/oracle/product/10.2.0/admin/auxdb/udump
db_name=auxdb
undo_tablespace=undotbs1
undo_management=auto
undo_retention=900
db_block_size=8192
compatible=10.2.0.1
control_files='/u01/oracle/product/10.2.0/oradata/auxdb/control01.ctl'
db_file_name_convert=('+DATA','/u01/oracle/product/10.2.0/oradata/auxdb')
log_file_name_convert=('+DATA','/u01/oracle/product/10.2.0/oradata/auxdb')
db_create_file_dest='/u01/oracle/product/10.2.0/oradata/auxdb'
db_create_online_log_dest_1='/u01/oracle/product/10.2.0/oradata/auxdb'
My target database diskgroup info:
GROUP_NUMBER NAME SECTOR_SIZE BLOCK_SIZE STATE
1 DATA 512 4096 MOUNTED N
2 FLASH 512 4096 MOUNTED E
Please could you have look the following error:
type1:
Note: when I configure The log_file_name_convert=('+DATA') in initAUXDB.ora parameter file, the following error are occurring:
RMAN> run {
2> allocate auxiliary channel C1 device type disk;
3> duplicate target database to auxdb;
4> }
Starting Duplicate Db at 03-MAR-13
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/03/2013 14:43:05
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename +FLASH/prod/onlinelog/group_3.259.809008171 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +FLASH/prod/onlinelog/group_2.258.809008167 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +FLASH/prod/onlinelog/group_1.257.809008165 conflicts with a file used by the target database
type2:
when I configure The log_file_name_convert=('+FLASH') in initAUXDB.ora, again I am getting the following error:
RMAN> run {
2> allocate auxiliary channel C1 device type disk;
3> duplicate target database to auxdb;
4> }
allocated channel: C1
channel C1: sid=36 devtype=DISK
Starting Duplicate Db at 04-MAR-13
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/04/2013 08:37:10
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename +DATA/prod/onlinelog/group_3.263.809008169 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/prod/onlinelog/group_2.262.809008165 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/prod/onlinelog/group_1.261.809008163 conflicts with a file used by the target database
Please suggest me to overcome the above errors.

Hi Mr.Rao,
Thank you for your reply..
I follwed as per as your query, but I am getting different error:
channel C1: starting datafile backupset restore
channel C1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/system.256.809008077 <---------here the directory structure is "/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/" but I mention in initauxdb.ora parameter only "/u01/oracle/product/10.2.0/odata/auxdb/".
restoring datafile 00002 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/undotbs1.258.809008077
restoring datafile 00003 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/sysaux.257.809008077
restoring datafile 00004 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/users.259.809008077
channel C1: reading from backup piece +FLASH/prod/backupset/2013_03_04/nnndf0_tag20130304t072249_0.265.809162569
ORA-19870: error reading backup piece +FLASH/prod/backupset/2013_03_04/nnndf0_tag20130304t072249_0.265.809162569
ORA-19505: failed to identify file "+FLASH/prod/backupset/2013_03_04/nnndf0_tag20130304t072249_0.265.809162569"
ORA-17503: ksfdopn:2 Failed to open file +FLASH/prod/backupset/2013_03_04/nnndf0_tag20130304t072249_0.265.809162569
ORA-15001: diskgroup "FLASH" does not exist or is not mounte
failover to previous backup
channel C1: starting datafile backupset restore
channel C1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/system.256.809008077
restoring datafile 00002 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/undotbs1.258.809008077
restoring datafile 00003 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/sysaux.257.809008077
restoring datafile 00004 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/users.259.809008077
channel C1: reading from backup piece /u01/backup/prod/df_t809162421_s24_p1
channel C1: restored backup piece 1
piece handle=/u01/backup/prod/df_t809162421_s24_p1 tag=TAG20130304T072021
channel C1: restore complete, elapsed time: 00:01:17
Finished restore at 04-MAR-13
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "AUXDB" RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 ( '/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_1.261.809008163',
'/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_1.257.809008165' ) SIZE 50 M REUSE,
GROUP 2 ( '/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_2.262.809008165',
'/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_2.258.809008167' ) SIZE 50 M REUSE,
GROUP 3 ( '/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_3.263.809008169',
'/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_3.259.809008171' ) SIZE 50 M REUSE
DATAFILE
'/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/system.256.809008077'
CHARACTER SET WE8ISO8859P1
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=809171578 filename=/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/undotbs1.258.809008077
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=809171578 filename=/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/sysaux.257.809008077
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=809171578 filename=/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/users.259.809008077
channel C1: starting archive log restore to default destination
channel C1: restoring archive log
archive log thread=1 sequence=12
channel C1: restoring archive log
archive log thread=1 sequence=13
channel C1: reading from backup piece /u01/backup/prod/al_t809162496_s26_p1
channel C1: restored backup piece 1
piece handle=/u01/backup/prod/al_t809162496_s26_p1 tag=TAG20130304T072136
channel C1: restore complete, elapsed time: 00:00:04
archive log filename=/u01/oracle/product/10.2.0/db_1/dbs/arch1_12_809008161.dbf thread=1 sequence=12
channel clone_default: deleting archive log(s)
archive log filename=/u01/oracle/product/10.2.0/db_1/dbs/arch1_12_809008161.dbf recid=2 stamp=809171585
archive log filename=/u01/oracle/product/10.2.0/db_1/dbs/arch1_13_809008161.dbf thread=1 sequence=13
channel clone_default: deleting archive log(s)
archive log filename=/u01/oracle/product/10.2.0/db_1/dbs/arch1_13_809008161.dbf recid=1 stamp=809171583
channel C1: starting archive log restore to default destination
channel C1: restoring archive log
archive log thread=1 sequence=14
channel C1: reading from backup piece +FLASH/prod/backupset/2013_03_04/annnf0_tag20130304t072246_0.264.809162567
ORA-19870: error reading backup piece +FLASH/prod/backupset/2013_03_04/annnf0_tag20130304t072246_0.264.809162567
ORA-19505: failed to identify file "+FLASH/prod/backupset/2013_03_04/annnf0_tag20130304t072246_0.264.809162567"
ORA-17503: ksfdopn:2 Failed to open file +FLASH/prod/backupset/2013_03_04/annnf0_tag20130304t072246_0.264.809162567
ORA-15001: diskgroup "FLASH" does not exist or is not mounte
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/04/2013 09:53:11
RMAN-03015: error occurred in stored script Memory Script
RMAN-20506: no backup of archivelog found
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of log thread 1 seq 14 lowscn 542329 found to restore

Issues with Synchronize to and from DB (version 3.3.0.747)

Having an issue with syncing the model and the data dictionary is a very specific case:
1. Reverse engineer an existing table (T1)
2. Copy the table (in data modeler) - T2
3. Rename the table, make changes (add columns and keys)
4. Forward engineer the new table (i.e., export and run DD for T2L)
5. Make additional changes to new table (T2) in data model.
6. Run sync db with model - the sync routine compares my new table (t2) to the original table (T1) in the database! It cannot "find" my new table (T2) in the database to compare to.
7. Alternatively try to sync the model with the db - this time it wants to sync the original table (T1) to itself (which has no change) and DROP my new table (T2) from the model.
It appears that sync is looking at meta data one my new table (T2) that contains the original copied table's name (T1). And in fact if I look at the table Summary properties - the source db object property does list the original table name (T1).
I also tried to reverse engineer the new table (T2) to the merge with the model, that has the same behavior as the sync.
Is there a way to fix this short of dropping T1 from the schema?
Edited by: Kent Graziano on May 20, 2013 2:37 PM

Hi Kent,
thanks for reporting the problem. I logged a bug and ER for that.
Is there a way to fix this short of dropping T1 from the schema?Unnecessary information about source need to be cleared. Here is a script that will help on that:
//array with 2 elements to illustrate different use cases - the first is used to have exact match on table name
// the second one ("REGIO") can be used with following check in inList function
//if(table.getName().startsWith(list)){
var list = ["Regionsv1","REGIO"];
function isInList(table){
     for(var i=0;i<list.length;i++){
          // different approaches to match table name can be used
          // be aware of letter case
          //if(table.getName().startsWith(list[i])){
          if(table.getName().equalsIgnoreCase(list[i])){
               return true;
     return false;
function clearSourceStampforTable(table){
     clearSourceStamp(table);
     cols = table.getElements();
     for(var i=0;i<cols.length;i++){
          clearSourceStamp(cols[i]);
     keys = table.getKeySet().toArray();
     for(var i=0;i<keys.length;i++){
          clearSourceStamp(keys[i]);
          if(keys[i].isFK()){
               clearSourceStamp(keys[i].getFKIndexAssociation());
function clearSourceStamp(object){
     object.setSourceConnName("");
     object.setSourceObjSchema("");
     object.setSourceObjName("");
     object.setSourceDDLFile("");
     object.setDirty(true);
tables = model.getTableSet().toArray();
for(var i=0;i<tables.length;i++){
     table = tables[i];
     if(isInList(table)){
          clearSourceStampforTable(table);

Rman clone duplicate database from active database

Hi All,
I read document saying that rman can duplicate database from active database (prod) to a remote server, so long as you configure listener and tnsname.
I am working toward it.
I met a problem, which is when i bring up auxiliary database in nomount mode, the listener service of that auxiliary database is in BLOCKED status, and throw out ora-12528 error when I rman auxiliary sys/pass@clonedb. Isn't nomount mode the mode which auxiliary db is supposed to be in?
(ora-12528: TNS:listener: all appropriate instances are blocking new connections)
Thanks,
milic

You may have run into the same problem like I did recently:
The (UR=A) clause in tnsnames.ora is intended to work with a dynamically registered handler so the use of SERVICE_NAME versus SID is preferred.
ORA-12528: TNS listener BLOCKED - trying to duplicate database
Also for further problems:
RMAN 11gR2 duplicate database ORA-17627 ORA-01017 RMAN-03009 ORA-17628

Issues with upgrading Hyperion HFM from 11.1.2 to 11.1.2.1

Hi,
After the recent release of Hyperion 11.1.2.1, we upgraded our development environment to 11.1.2.1 from 11.1.2.
Installation and configuration was smooth straight forward [ We used the Maintenance upgrade while installing 11.1.2.1 ].
We migrated the application created from 11.1.2 to 11.1.2.1 using copy App. We saw following issues.
1. We are unable to run consolidation and we get following Error: “An unknown error has occurred in the HsvData2 object”
2. Every time when we login to HFM workspace and run reports we see database authentication window, we have to enter admin credentials for first time.
3. We are unable to load a Rule File in 11.1.2.1, which was loaded successfully in 11.1.2.
Any details on the above issues or on the upgrade from 11.1.2 to 11.1.2.1 would be of great help.
Thanks and Regards,
Bhargav

I am going to throw out the most unexciting reply ever, but .... the answer probably lies in the 11.1.2.1 readme.
V25453-01 From : https://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=13638318
Consolidation
When running a consolidation, the following error may occur: “An unknown error has occurred in the HsvData2 object” with a description of: “Value violated the integrity constraints for a column or table” and the following problem: “Cannot insert duplicate key in object”. To resolve this error, delete invalid records.
I didn't look at the other issues; however, once again, I think the answers are most likely contained in the readmes.
Charles

Issue with executing Business Rules from Planning web

Hi,
We are using Hyperion Planning 9.3.0.1 and we keep getting an issue with the Business Rules. We get an error if we try to run the rules from Planning web. The same rules validates and executes fine if we run it from AAS. This issue gets resolved if we restart the Planning and RMI service. But this issue keeps happening randomly. Is there a permanent resolution to it? Is it a bug or I am missing something here?
Thanks and Regards,
Amol
Edited by: user638718 on Apr 7, 2009 5:20 PM

Hi,
Have you installed any of the patches for 9.3.0.1, I think it goes up to 9.3.0.1.09
One of the fixes was :-
8-665086601 (6588823) – When the Business Rules connection to the relational database is lost, Business Rules does not reconnect to it. To solve this problem, an optional property, HBR_CONNECTION_VALIDATE_TIME, was added to HBRServer.properties. This property specifies a time interval for checking the connection between Business Rules and the relational database. If the connection is not valid, a new connection is established. The time interval is specified in milliseconds and defaults to 300,000 (five minutes).
Though I know there has been more attention to fixing known issues on 9.3.1 than 9.3.0.1
Cheers
John
http://john-goodwin.blogspot.com/

Possible Issues with Duplicate Training Database?

Hello everyone!
First off, please forgive my ignorance! I've only been working with databases lightly over the last couple of years, and thus far only with MySQL and MS SQL.
Recently the company I work for purchased a new software package that required Oracle. We purchased a copy of Oracle 10.2 as part of the deal and the company that sold it to us, and set it up for us, has denied us dev access to the database, on our server, because it would expose their underlying data schema. I wasn't in change when the decision was made and we spent the money on a crippled copy of Oracle, but that's in the past.
Because we don't have dev access to Oracle we're unable to create a training database for this new software in house. We have to pay this company to create a test environment for us. I was told it would cost $500, until the tech said he was going to install Oracle on our training server.
At this point I stopped him and said at $500 they'll either be breaching their licensing agreement, or giving us a free copy! The other possibility is that they were going to install this and then just bill us for Oracle later on, despite quoting the job at $500.
The tech who was about to do the installation went to check with someone more senior and then returned to inform me that installing the second copy of Oracle would indeed require more licensing fees.
This verified what I already had told him, and I said we want a training database on our existing Oracle server, and then training copies of the new software can just point to that training database.
He now needs to take time with the more senior technicians while they're "analyzing the existing database server/environment". He was trying to talk me out of installing a training database on the existing server, and instead buying another copy of Oracle, which I believe to be a total cash grab. He had no solid reason why he couldn't do it, but refused to anyway and said he needs to talk to a more senior tech (the same one who said that yes, we'll need to purchase a second copy of Oracle rather than use a second database on the existing server).
So, these two databases, one live data and one a duplicate of that live data used in a training environment where changes won't be reported against, should be able to exist peacefully should they not? The same version of the same software accessing the same data from the same server, just a different database, shouldn't present any problems with my limited knowledge of Oracle! There will only ever be maybe 5 connections to the training environment at a time, and the server should be able to currently handle twice as many users connected as it's current maximum (edit: expected) load.
I know this wouldn't be a problem with MySQL, or MS SQL, and Oracle is a superior database package, so can anyone think of any legitimate reason that might back up the claim that having that duplicate database will be a problem?
Thanks in advance for any guidance here!

Thank you very much John!
We have a per user license and I don't expect our training needs to exceed even a half dozen people at a time to start (A small, significant, fraction of the initial user base). In the future we can easily recommission other resources, or purchase more. The whole project is in the earlier stages anyway, so the needs are smaller now (but the money we spend on licensing could be recurring).
I understand the requirements angle from a server perspective, but those points you brought up drill down into what I need to know a bit more.
I doubt rollback segments would be necessary, I was thinking more along the lines of scheduled replication/duplication of the production database on a weekly or monthly basis, just to keep the material at least somewhat up to date.
I also don't think temporary table space would put much load on storage either, at least in the long run.
RAM isn't much an issue with a 64 bit version running either, for our needs now at least.
My instinct, and what you mention about even potential impact of altering the existing database schema enforces this, is that it's basically safer to create a separate database, but less resource intensive to alter the schema of an existing Oracle database to suit training needs (in this situation, maybe, making some vague assumptions about software probably), if done correctly (although still carrying risks).
I do wish I had the time to read up on this more now, and I will as soon as I have the time.
I probably will download 10g express edition to familiarize myself a bit more now, as soon as I come up with an application for it, to at least try out whatever I read.
Thanks for the advice

Powershell : Issues with user input collection from Multiple InPutBox Form

I am having issues with getting user input to pass from a form that a user fills out into variables that I can then use in other methods and commands. (ex; SQL Query, SQL Data Add, ... )
I have attached the Powershell script I am using in it's designed form but I am having issues getting the DataCollection function to grab the content of the InputBox and send it to a variable for later use.
Note: I'm running this at this time from the ISE so I can actually see what is going on.
Any help would be appreciated.
DAS
[System.Reflection.Assembly]::LoadWithPartialName( “System.Windows.Forms”)
[System.Reflection.Assembly]::LoadWithPartialName( “Microsoft.VisualBasic”)
$FormDBA = New-Object System.Windows.Forms.Form
$FormDBA.Size = New-Object System.Drawing.Size(300,500)
$FormDBA.Text = "MIS Data"
$FormDBA.StartPosition = [System.Windows.Forms.FormStartPosition]::CenterScreen;
function DataCapture
$SubSID = $InBoxSID.text
ECHO $SubSID
$InBoxTxtSID = New-Object System.Windows.Forms.Label
$InBoxTxtSID.Location = New-Object System.Drawing.Size(25,15)
$InBoxTxtSID.Text = "Sticker ID : "
$InBoxSID = New-Object System.Windows.Forms.TextBox
$InBoxSID.Location = New-Object System.Drawing.Size(130,10)
$InBoxSID.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtUSR = New-Object System.Windows.Forms.Label
$InBoxTxtUSR.Location = New-Object System.Drawing.Size(25,55)
$InBoxTxtUSR.Text = "User Name ; "
$InBoxUSR = New-Object System.Windows.Forms.TextBox
$InBoxUSR.Location = New-Object System.Drawing.Size(130,50)
$InBoxUSR.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtPCN = New-Object System.Windows.Forms.Label
$InBoxTxtPCN.Location = New-Object System.Drawing.Size(25,95)
$InBoxTxtPCN.Text = "PC Name : "
$InBoxPCN = New-Object System.Windows.Forms.TextBox
$InBoxPCN.Location = New-Object System.Drawing.Size(130,90)
$InBoxPCN.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtDPT = New-Object System.Windows.Forms.Label
$InBoxTxtDPT.Location = New-Object System.Drawing.Size(25,135)
$InBoxTxtDPT.Text = "Department : "
$InBoxDPT = New-Object System.Windows.Forms.TextBox
$InBoxDPT.Location = New-Object System.Drawing.Size(130,130)
$InBoxDPT.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtPCT = New-Object System.Windows.Forms.Label
$InBoxTxtPCT.Location = New-Object System.Drawing.Size(25,175)
$InBoxTxtPCT.Text = "PC Type : "
$InBoxPCT = New-Object System.Windows.Forms.TextBox
$InBoxPCT.Location = New-Object System.Drawing.Size(130,170)
$InBoxPCT.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtMAK = New-Object System.Windows.Forms.Label
$InBoxTxtMAK.Location = New-Object System.Drawing.Size(25,215)
$InBoxTxtMAK.Text = "Make : "
$InBoxMAK = New-Object System.Windows.Forms.TextBox
$InBoxMAK.Location = New-Object System.Drawing.Size(130,210)
$InBoxMAK.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtMOD = New-Object System.Windows.Forms.Label
$InBoxTxtMOD.Location = New-Object System.Drawing.Size(25,255)
$InBoxTxtMOD.Text = "Model : "
$InBoxMOD = New-Object System.Windows.Forms.TextBox
$InBoxMOD.Location = New-Object System.Drawing.Size(130,250)
$InBoxMOD.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtOPS = New-Object System.Windows.Forms.Label
$InBoxTxtOPS.Location = New-Object System.Drawing.Size(25,295)
$InBoxTxtOPS.Text = "O.S. : "
$InBoxOPS = New-Object System.Windows.Forms.TextBox
$InBoxOPS.Location = New-Object System.Drawing.Size(130,290)
$InBoxOPS.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtDIS = New-Object System.Windows.Forms.Label
$InBoxTxtDIS.Location = New-Object System.Drawing.Size(25,335)
$InBoxTxtDIS.Text = "Disposed : "
$InBoxDIS = New-Object System.Windows.Forms.TextBox
$InBoxDIS.Location = New-Object System.Drawing.Size(130,330)
$InBoxDIS.Size = New-Object System.Drawing.Size(120,20)
$button = New-Object System.Windows.Forms.Button
$button.Location = New-Object System.Drawing.Size(150,400)
$button.Width = 100
$button.Text = “Ok”
$button.Add_Click({DataCapture})
$FormDBA.Controls.Add($button)
$FormDBA.Controls.Add($InBoxTxtSID)
$FormDBA.Controls.Add($InBoxTxtUSR)
$FormDBA.Controls.Add($InBoxTxtPCN)
$FormDBA.Controls.Add($InBoxTxtDPT)
$FormDBA.Controls.Add($InBoxTxtPCT)
$FormDBA.Controls.Add($InBoxTxtMAK)
$FormDBA.Controls.Add($InBoxTxtMOD)
$FormDBA.Controls.Add($InBoxTxtOPS)
$FormDBA.Controls.Add($InBoxTxtDIS)
$FormDBA.Controls.Add($InBoxSID)
$FormDBA.Controls.Add($InBoxUSR)
$FormDBA.Controls.Add($InBoxPCN)
$FormDBA.Controls.Add($InBoxDPT)
$FormDBA.Controls.Add($InBoxPCT)
$FormDBA.Controls.Add($InBoxMAK)
$FormDBA.Controls.Add($InBoxMOD)
$FormDBA.Controls.Add($InBoxOPS)
$FormDBA.Controls.Add($InBoxDIS)
$FormDBA.ShowDialog()

Change this:
$button = New-Object System.Windows.Forms.Button
$button.Location = New-Object System.Drawing.Size(150,400)
$button.Width = 100
$button.Text = “Ok”
$button.DialogResult='Ok' #<<<<<-------
#$button.Add_Click({DataCapture})
Remove function andrun like this:
if('Ok' -eq $FormDBA.ShowDialog()){
$FormDBA.Controls|%{$_.Text}
With names you can get values by control name.
¯\_(ツ)_/¯
This suggestion works for the purpose I needed.
If I could, I would attach the file instead of pasting the script so you can see what all I am using this to do.
But in short, we have a main form we use to pull records from a database and call up an application at the click of a button for remote assistance. However, we seem to now need the ability to have this application to edit and add new records into said
database. That's where this second form came in and also when I hit my issue with the information capture.
At this time I'm getting this to format the information collected so that I can start using using it with SQL commands.

Has anyone been able to clone a database from cloud 12c

I can duplicate a database from a user defined RMAN script, as long as I include the connection request to the auxiliary database, but I've not been able to get the 'Clone Database' feature under the provisioning menu to work using an active duplicate.
I get a username password error which is identical to what you'd get if you did
rman target / auxiliary sys/<password> catalog rman/rman@RMAN_tns as opposed to
rman target sys/<password> auxiliary sys/<password> catalog rman/rman@RMAN_tns
when doing a manual duplication...
I've got an SR with Oracle..but has anyone managed to make this work ?
Thanks

with the latest agent patch...everything works..

Issue in configuring Standby Database from Active database in 11g by RMAN

POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.
Edited by: 895188 on Dec 21, 2012 5:50 PM
Edited by: 895188 on Dec 21, 2012 6:09 PM
Edited by: 895188 on Dec 21, 2012 6:22 PM

Hello;
Script has to be run from auxiliary.
Great details, but what I don't see is how you connect in RMAN.
Example
Start RMAN
$ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RECOVER2 (DBID=3806912436)
connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
Generally for active duplication I start the future standby on a pfile NOMOUNT.
Auxiliary Instance Initialization Parameters Needed :
DB_NAME
CONTROL_FILES
DB_BLOCK_SIZE
( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
Then start RMAN and finally run a single line duplication command.
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
mseberg

Problem with duplicate target database from active database

Hi all,
i try duplicate database from active database
- I have von target and auxiliary the same SYS Password
- tnsping wogks in both directions fine
- sqlplus to target and auxilairy works from both server
- Metalink Solution 1056174.1 not help
but in the Rman log become this error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on a1 channel at
ORA-17629: Cannot connect to the remote database server
ORA-17629: Cannot connect to the remote database server
i do do :
rman target sys/PASSWD@TARGET auxiliary sys/PASSWD
run
ALLOCATE CHANNEL a1 DEVICE TYPE DISK;
ALLOCATE AUXILIARY CHANNEL d1 DEVICE TYPE DISK;
duplicate target database to XXXXX
from active database
DB_FILE_NAME_CONVERT ('/XXXX/XXXX/XXXXXX','/XXXXX/XXXXXX/XXXXX/')
spfile
parameter_value_convert '/XXXX/','/XXXXX/'
set log_file_name_convert '/XXXXX/','/XXXXX/'
any Idea ?
Best Regards

Don't know if this will help, but I use the connect string below to connect, then run the command below. This is, of course, after the rman backup from the prod system has been copied to the flash_recovery_area of the aux database. All file paths are the same between the two systems. Works like a charm most nights. The local tnsnames file on the rman catalog server has working entries for @SDPROD, @rman and @SDSTB.
[Connect String]
rman TARGET SYS/xxxxx@SDPROD CATALOG rman/xxxxx@rman AUXILIARY SYS/xxxxx@SDSTB cmdfile D:\cladmin\Scripts\DuplicateSD.rcv LOG=D:\cladmin\Logs\DuplicateSD.f
[Command file block]
RUN{
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
DUPLICATE TARGET DATABASE TO DATABASENAME
NOFILENAMECHECK;
Edited by: user522620 on Jun 27, 2011 6:36 PM

Issue in accesing the database from osb10.3.1

Hi All,
I want to call database from osb10.3.1
Can anyone please tell me how can I configure the database adapter and use the jca protol to access the database tables in osb10.3.1
Also which Jdeveloper version I should use for configuring the database adapter in Jdeveloper(if required)
Thanks in Advance!!

Hi Roshni,
There is a very good article written by Guido Schmutz on this...
Oracle Service Bus 11g and DB Adapter: a more integrated approach!
http://guidoschmutz.wordpress.com/2010/08/08/oracle-service-bus-11g-and-db-adapter-a-different-more-integrated-approach/
Remember! It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
https://forums.oracle.com/forums/ann.jspa?annID=893
Cheers,
Vlad

Issues with clone of database from PROD to non-prod

Similar Messages

Maybe you are looking for