Issues with migrating to SUN JVM

Hi
Chapter 4 of the "Microsoft Java Virtual Machine Transition Guide for IT Professionals" [part of the documentation for "The Diagnostic Tool for the Microsoft Virtual Machine"] contains[under a discussion of disabling Java] :
(a) '... the Sun JRE, which "impersonates" the Microsoft Java Virtual Machine in IE ...';
(b) 'Some Java plug-ins install in a Windows system by "impersonating" the Microsoft Java Virtual Machine using the same registry entry and Class ID in installation ... Be cautious when installing JREs that impersonate the Microsoft Java Virtual Machine ...'.
Can anyone provide more information about this "impersonation" and what to be "cautious" about?
In particular:
(1) Does the impersonation only affect interpretation of applets under Internet Explorer plus any direct HTML references to the associated registry entries [and not any direct executable references to the Microsoft Java VM]?
(2) Does the Microsoft Java VM have to be retained [even if another JRE is installed] to support any direct executable references to it?
When I run "The Diagnostic Tool for the Microsoft Virtual Machine" on a Windows 98SE system, its VM Dependency Report has many entries for Micrsoft library modules - eg IEDETECT.DLL - and its Visual J++ Class Report has many entries - eg C:\WINDOWS\SYSTEM\MSHTML.DLL.
There is no information about whether such dependencies are critical - the modules may have alternative paths if the MSJVM is not installed.
At this stage, I suspect that Microsoft is not going to issue updates to such modules [Windows 98 is no longer fully supported] and therefore it would be unsafe to remove the Microsoft Java VM.
Chapter 4 also mentions a "TreatAs" subkey, and recommends removing it. Does the Sun JRE install or rely on such a subkey?
Chapter 6 says that "The use of Microsoft extensions is easy to find in current J++ source files ..." but is there any way that users without access to such source files can find which executable modules are dependendent on the entries shown when I run "The Diagnostic Tool for the Microsoft Virtual Machine" and look at its Visual J++ JAVAREG Report [which lists CLSIDs and associated Java classes for msjava.dll].
Regards,
Peter Jones

HI Owen,
JVM dependent web Applications are not working with IE after migrating to SUN JVM from MSJVM
steps I followed are as follows.
1)uninstalled MSJVM using MSJVM removal tool
2) Install SUNJVM 1.4.2_07
os used is windows xp sp2.
I did checked SUN JVM in Internet options.
Then I tried to test JVM dependent web apps on this they are not working. sometime JVM was attempting to upgrade to a newer version.
But strangely it started working when I followed follwong steps.
1) Install SUNJVM 1.4.1 (initial) - this version actually works proper with Documentum
2) Uninstall SUNJVM 1.4.1 from Add/Remove Programs AND Remove the two Java Folders from Registry, under the Software Folder
3) Reboot the pc
4) Install SUNJVM 1.4.2_07
5)checked SUN JVM in Internet options.
Can Some one help me to know the reason for both not wokring and working.espl working since deepending on this I need to decide on how to migrate to SUN JVM
Thanks
Nagaraj
History:
My client is having MSJVM on their PCs I had suggested to migrate all these MSJVM dependent apps to SUN JVM. In this process I wanted to test these MSJVM apps with SUN JVM. while setting test lab I observed above mentioned behaviour.

Similar Messages

  • Issue with migrating 'WI' using 'TFS migration tool' when trying migrate from '2013 to 2013'

    Hi ,
    Our final destination is to migrate projects from TFS-2010 to TFS-2013, for testing and familiarizing with the
    migration tool we trying to migrate project within the 2013 server and between two servers of 2013,
    we don't have any issues with migrating source code, we done it successfully,
    but when we try to migrate 'WI' within same server and also tried to between two server we are getting two
    different errors respectively when tried within server and between server, unable to migrate 'WI' in any scenario, log files attached for the same. Log file 'error-1' is the errors generated while trying migrate 'wI' within the same server and 'error-2' is
    the errors generated while trying migrate 'wI' between two server, Need ur guidelines to over come these issues.

    Hi Sham,
    Based on your description, I'd like to know the version of TFS integration tools you're using and the error details when migrate work items. If you use TFS integration tools 2012, please make sure you have Team Explorer 2012 installed on your server machine.
    Please also let us know the configuration you used for the migartion. If you migrate between different domains, make sure the domains have two-way trust relationship. If the issue persists, check the event logs to see if there any useful information and
    elaborate more details about your scenario with screenshots.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Issue with migrated assets

    We have an issue with migrated assets a few years ago where some assets have now started depreciating in one depreciation area but not the others.
    The assets had been retired at the date of migration.  In order for them to correctly be shown as part of the opening balance for the year and also shown as being disposed during the year, in addition to loading their original cost, opening accumulated depreciation and depreciation for the year, a record was created in the ANEP table to show that the asset had been disposed of during the year.
    The records were created as below:
    This did not cause any issues until we upgraded to EHP 6 about six month ago.  Before this, depreciation area 30 did not generate depreciation entries.  Subsequent to the upgrade, depreciation area 30 started depreciating and posting depreciation to Group Currency.
    For example, the asset below is not generating depreciation in depreciation area 01:
    But it is depreciating in depreciation area 30:
    Can anybody suggest how we correct the historic disposal record in ANEP for depreciation area 30?
    Regards
    Gareth

    Thanks Ajay
    The area is now set to post depreciation, which it did not before.  To be honest, we actually prefer this as the previous configuration resulted in FX differences, which this does not.
    Our only issue is with the assets that are now only depreciating in dep area 30 which we are trying to rectify.
    The problem is that they have a NBV in area 30 which is incorrect.  The other areas are correct.
    Ideally we need to scrap them without generating a FI posting.
    Any ideas?
    Gareth

  • Issue with migration DB from SQL Server 2005 to Oracle 11.2 using SQL Developer Migration workbench

    Hi,
    We face an issue while migrating an SQL Server 2005 DB to Oracle 11.2.  It fails during the process.  I hope someone on the forum has seen this before and can give us some advice.
    I use the latest version of SQL Developer with JRE included (3.2.20.09).  The JDBC driver to connect to SQL Server 2005 is 1.2.0
    Here are the steps we take in the Migration Workbench wizard:
    I made an online extract of the SQL Server database.
    Using the workbench in SQL Developer I created a migration repository in schema PDM_MIGRATION.
    Next I start the migration, it captures the tables fine, but immediately after the start of the conversion I get a failed message without further explanations.
    This is the content of the error xml:
    <?xml version="1.0" encoding="windows-1252" standalone="no"?>
    <log>
    <record>
      <date>2013-08-14T16:23:32</date>
      <logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
      <level>SEVERE</level>
      <class>oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil</class>
      <message>Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
      <param>oracle.dbtools.migration.workbench.core.logging.LogInfo@4c12ab</param>
      <exception>
        <message>oracle.dbtools.migration.convert.ConvertException: Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
        <frame>
          <class>oracle.dbtools.migration.convert.ConverterWorker</class>
          <line>1078</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.convert.ConverterWorker</class>
          <line>316</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>1002</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>303</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>205</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>159</line>
        </frame>
        <frame>
          <class>oracle.dbtools.raptor.backgroundTask.RaptorTask</class>
          <line>193</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask$Sync</class>
          <line>303</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask</class>
          <line>138</line>
        </frame>
        <frame>
          <class>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask</class>
          <line>515</line>
        </frame>
        <frame>
          <class>java.util.concurrent.Executors$RunnableAdapter</class>
          <line>441</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask$Sync</class>
          <line>303</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask</class>
          <line>138</line>
        </frame>
        <frame>
          <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
          <line>886</line>
        </frame>
        <frame>
          <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
          <line>908</line>
        </frame>
        <frame>
          <class>java.lang.Thread</class>
          <line>662</line>
        </frame>
      </exception>
    </record>
    <record>
      <date>2013-08-14T16:23:32</date>
      <logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
      <level>SEVERE</level>
      <class>oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil</class>
      <message>Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
      <param>oracle.dbtools.migration.convert.ConverterWorker.copyModel(ConverterWorker.java:1078)</param>
      <param>oracle.dbtools.migration.convert.ConverterWorker.runConvert(ConverterWorker.java:316)</param>
      <param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doConvert(FullMigrateTask.java:1002)</param>
      <param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doMaskBasedActions(FullMigrateTask.java:303)</param>
      <param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:205)</param>
      <param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:159)</param>
      <param>oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193)</param>
      <param>java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)</param>
      <param>java.util.concurrent.FutureTask.run(FutureTask.java:138)</param>
      <param>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.run(RaptorTaskManager.java:515)</param>
      <param>java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)</param>
      <param>java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)</param>
      <param>java.util.concurrent.FutureTask.run(FutureTask.java:138)</param>
      <param>java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)</param>
      <param>java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)</param>
      <param>java.lang.Thread.run(Thread.java:662)</param>
      <param>oracle.dbtools.migration.workbench.core.logging.LogInfo@5dc1bc</param>
      <exception>
        <message>oracle.dbtools.migration.convert.ConvertException: Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
        <frame>
          <class>oracle.dbtools.migration.convert.ConverterWorker</class>
          <line>1078</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.convert.ConverterWorker</class>
          <line>316</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>1002</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>303</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>205</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>159</line>
        </frame>
        <frame>
          <class>oracle.dbtools.raptor.backgroundTask.RaptorTask</class>
          <line>193</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask$Sync</class>
          <line>303</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask</class>
          <line>138</line>
        </frame>
        <frame>
          <class>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask</class>
          <line>515</line>
        </frame>
        <frame>
          <class>java.util.concurrent.Executors$RunnableAdapter</class>
          <line>441</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask$Sync</class>
          <line>303</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask</class>
          <line>138</line>
        </frame>
        <frame>
          <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
          <line>886</line>
        </frame>
        <frame>
          <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
          <line>908</line>
        </frame>
        <frame>
          <class>java.lang.Thread</class>
          <line>662</line>
        </frame>
      </exception>
    </record>
    <record>
      <date>2013-08-14T16:23:32</date>
      <logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
      <level>WARNING</level>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <message>Building converted model: FAILED : Database Migration : FAILED</message>
      <param>oracle.dbtools.migration.workbench.core.logging.LogInfo@15a3779</param>
    </record>
    Does anybody know what this error means and what steps we should take to continue the migration?
    I see the PDM_MIGRATION.MIGR_FILTER is a type.
    Many thanks in advance,
    Kris

    Hi Wolfgang,
    Thanks for your reply.
    This is how the type MIGR_FILTER looks like:
    create or replace
    TYPE MIGR_FILTER IS OBJECT (
      FILTER_TYPE INTEGER, -- Filter Types are 0-> ALL, 1->NAMELIST, 2->WHERE CLAUSE, 3->OBJECTID LIST
      OBJTYPE VARCHAR2(40),
      OBJECTIDS OBJECTIDLIST,
      NAMES NAMELIST,
      WHERECLAUSE VARCHAR2(1000));
    I think the repository user has the correct privileges.  This is the overview of privileges it has:
    SQL> select * from dba_sys_privs where GRANTEE in ('PDM_MIGRATION') order by GRANTEE;
    GRANTEE PRIVILEGE ADM
    PDM_MIGRATION ALTER SESSION NO
    PDM_MIGRATION CREATE CLUSTER NO
    PDM_MIGRATION CREATE DATABASE LINK NO
    PDM_MIGRATION CREATE PROCEDURE NO
    PDM_MIGRATION CREATE SEQUENCE NO
    PDM_MIGRATION CREATE SESSION NO
    PDM_MIGRATION CREATE SYNONYM NO
    PDM_MIGRATION CREATE TABLE NO
    PDM_MIGRATION CREATE TRIGGER NO
    PDM_MIGRATION CREATE VIEW NO
    PDM_MIGRATION UNLIMITED TABLESPACE NO
    SQL> select * from dba_role_privs where GRANTEE in ('PDM_MIGRATION') order by GRANTEE;
    GRANTEE GRANTED_ROLE ADM DEF
    PDM_MIGRATION CONNECT NO  YES
    PDM_MIGRATION RESOURCE NO  YES
    Best regards,
    Kris

  • Issue with migrated transformation rule after transport

    Hello all,
    We have migrated couple of update rules and transfer rules to transformation rules. All the transformation rules are active in development environment.
    The issue is when we transport these transformation rules to QA, one of the fields of datapacket dimension "RECORD" becomes &R1& in the global structure of start routine and therefore, transport fails in QA. Along with this we had another issue that if we add any additional fields in the cube or ODS structure, the global structure in start routine doesn't change after transport in QA. Basically, it seems like it doesn't do anything when we do transport.
    We tried couple of things by transporting entire flow inclding target and source objects, we also tried transporting only transformation with overwrite mode. But none of the things worked. We also have logged the message with SAP.
    SAP suggested us to open the QA environment and perform the change manually. We did it and obviously we could activate the transformation rules. But when we tried to re-transport the transformation, it is keep failing with the error "Syntax Error". My assumption has after the transport, the field has become &R1& again.
    Has anybody faced such issue? We are on Ehp1 SP7.
    - Danny

    Thanks Murali,
    Yes as I mentioned SAP suggested us to open the box and do it manually, but once we are done with the manual changes, we tried transporting the same transformation rule again, which I guess going to be the case in case of any future enhancement. Transport failed and it says "Syntax Error".
    The transformations we activated manually in the target system are active, but when we try to load the data, it throws the exception error.
    Any clue ?? Is it working fine in your system after you did manual changes? Did all future transport go well ?
    - Danny

  • Issue with migration of Public folders from Exchange 2010 to Exchange Online.

    We are trying to migratie the Public folders structure of one of our clients and are running in an error during migration.
    We are following the steps provided by
    https://technet.microsoft.com/en-us/library/jj983799(v=exchg.150).aspx
    But after creating the New-PublicFolderMigrationRequest the migration request fails (within 15 minutes) with TooManyBadItemsPermanentException. The following errors are reported.
    23-1-2015 20:59:16 [AM2PR02MB0370] A corrupted item was encountered: Folder property ""Denbosch""
    23-1-2015 20:59:16 [AM2PR02MB0370] A corrupted item was encountered: Folder property ""Eindhoven""
    23-1-2015 20:59:16 [AM2PR02MB0370] A corrupted item was encountered: Folder property ""Enschede""
    23-1-2015 20:59:16 [AM2PR02MB0370] A corrupted item was encountered: Folder property ""Groningen""
    23-1-2015 20:59:17 [AM2PR02MB0370] A corrupted item was encountered: Folder property ""Hoofddorp""
    23-1-2015 20:59:45 [AM2PR02MB0370] Fatal error TooManyBadItemsPermanentException has occurred.
    ","30-12-2114 20:55:36","New"
    With the report logs, we gathered the following information (for every folder that is "corupted")
    Timestamp         : 23-1-2015 20:59:17
    FailureType       : MapiExceptionPermanentImportFailure
    FailureCode       : -2147467259
    MapiLowLevelError : 0
    FailureSide       : Source
    FailureSideInt    : 1
    ExceptionTypes    : {Exchange, Mapi, DataProviderPermanent, MapiImportFailure}
    ExceptionTypesInt : {1, 30, 102, 43}
    Message           : MapiExceptionPermanentImportFailure: Data import failed --> Save on the folder partially succeeded.
                         Result = PartiallySucceeded, Property: [0x3fc90102] , PropertyErrorCode: AccessDenied, PropertyErr
                        orDescription: .. Error code = PartialCompletion (0x00040680)
    MessageData       :
    DataContext       : --------
                        Operation: ISourceFolder.CopyTo
                        Operation: ISourceFolder.CopyTo
                        OperationSide: Source
                        Outlook Anywhere Public Folders (/o=domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT
                        )/cn=Recipients/cn=sysadmin)
                        PropTags: [count:23, 0x360f000d(ContainerContents); 0x3610000d(FolderAssociatedContents); 0x360e000
                        d(ContainerHierarchy); 0x61af0102; 0xe080003(MessageSize); 0xe230003(InternetArticleNumber); 0xff40
                        003(Access); 0x360a000b(SubFolders); 0x36170003(AssocContentCount); 0x65e00102(SourceKey); 0x65e101
                        02(ParentSourceKey); 0x65e20102(ChangeKey); 0xe270102(NTSD); 0xf000102(FreeBusyNTSD); 0x3fe00102; 0
                        x3fe0000d(AclTable); 0x3ffe0102; 0x3fe1000d(RulesTable); 0x3fe10102; 0x66980102(ReplicaList); 0x663
                        b0102(AddressBookEntryId); 0x671d0102(PfProxy); 0x671f000b(PfProxyRequired)]
                        Folder: 'Public Root/IPM_SUBTREE/werkbevestigingen', entryId [len=46, data=000000001A44739
                        0AA6611CD9BC800AA002FC45A0300E588060DE94CBC42AA16C57D7D69B8D400000093A2A60000], parentId [len=46, d
                        ata=000000001A447390AA6611CD9BC800AA002FC45A0300E588060DE94CBC42AA16C57D7D69B8D40000000000010000]
    DataContextData   :
    StackTrace        :    at Microsoft.Mapi.MapiExceptionHelper.ThrowImportFailureException(String message, Exception inne
                        r)
                           at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesF
                        lags copyPropertiesFlags, Boolean useCopyProps)
                           at Microsoft.Exchange.MailboxReplicationService.MapiSourceFolder.Microsoft.Exchange.MailboxRepli
                        cationService.ISourceFolder.CopyTo(IFxProxy destFolderProxy, CopyPropertiesFlags flags, PropTag[] e
                        xcludeTags)
                           at Microsoft.Exchange.MailboxReplicationService.SourceFolderWrapper.<>c__DisplayClass2.<Microsof
                        t.Exchange.MailboxReplicationService.ISourceFolder.CopyTo>b__0()
                           at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(Action operation)
                           at Microsoft.Exchange.MailboxReplicationService.ExecutionContextWrapper.Execute(Action operation
                        , Boolean measure)
                           at Microsoft.Exchange.MailboxReplicationService.SourceFolderWrapper.Microsoft.Exchange.MailboxRe
                        plicationService.ISourceFolder.CopyTo(IFxProxy destFolder, CopyPropertiesFlags flags, PropTag[] exc
                        ludeTags)
                           at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.<>c__DisplayClass12.<CopyFolde
                        rProperties>b__d()
                           at Microsoft.Exchange.MailboxReplicationService.CommonUtils.ProcessKnownExceptionsWithoutTracing
                        (Action actionDelegate, FailureDelegate processFailure)
    InnerException    : RopExecutionException: Save on the folder partially succeeded. Result = PartiallySucceeded, Propert
                        y: [0x3fc90102] , PropertyErrorCode: AccessDenied, PropertyErrorDescription: .. Error code = Partia
                        lCompletion (0x00040680)
    UnknownElements   :
    UnknownAttributes :
    Does someone has a tip for further troubleshooting this issue?

    Hi,
    There are a lot of corrupted items. You can try raising the baditemlimit to 999 to workaround this issue
    Get-PublicFolderMigrationRequest | Set-PublicFolderMigrationRequest -baditemlimit 100
    To resumed the PublicFolderMigrationRequest
    Get-PublicFolderMigrationRequest | Resume-PublicFolderMigrationRequest
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.
    Simon Wu
    TechNet Community Support

  • JCA Issue with migration from EP 6.0 SP2 to SAP NW2004s (EP 7.00 SP7)

    We are currently using JCA on EP 6.0 SP2 platform to connect to SAP R/3 backend system for custom java iviews as shown below ...
    Context ctx = null;
    IConnectionFactory connectionFactory = null;
    IConnection client = null;
    IConnection aConnection = null;
    try
         //Obtain the initial JNDI context
         ctx = new InitialContext();
         //Perform JNDI lookup to obtain connection factory
         connectionFactory = (IConnectionFactory) ctx.lookup("EISConnections/SAPFactory");
         connectionFactory.setConnectionTimeOut( 900 );          
         IConnectionSpec spec = connectionFactory.getConnectionSpec();
         // FOR MiniP     
         ((Map) spec).put("client", "100");
         ((Map) spec).put("UserName", "USER_ID");
         ((Map) spec).put("Password", "password");
         ((Map) spec).put("logonmethod", "UIDPW");
         ((Map) spec).put("Language", "EN");
         ((Map) spec).put("ashost", "10.14.17.44");
         ((Map) spec).put("sysnr", "02");                              
         aConnection = connectionFactory.getConnectionEx(spec);
    catch (Throwable th)
         StringWriter sw = new StringWriter();
         th.printStackTrace( new PrintWriter( sw ) );
         log("Caught an exception (Throwable) : \n" + sw.toString() );                 
    When we migrated the code, the connection to SAP R/3 system is failing. Searching servicemarketplace for some solution, we found a note 820857 and made the necessary code change for JNDI lookup from "EISConnections/SAPFactory" to "deployedAdapters/SAPFactory/shareable/SAPFactory" but we are still getting the following connection failure errors ...
    (R3/BW) Failed to get connection. Please contact your admin.
    com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: Nested Exception. Failed to get connection. Please contact your admin.
         at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewConnectionFailedException(SAPConnectorException.java:107)
    Also, the help link is not updated for any changes ...
    http://help.sap.com/saphelp_nw04s/helpdata/en/89/8a185c148e4f6582560a8d809210b4/content.htm
    I really appreciate any help being provided for solving the issue.

    Hello! Bhabesh,
    Could you please check your stack against mine, i am pasting that stack here.
    Please let me know if you are getting the same error or something else.
    FYI, i am pasting my code too. Please check if you are using the same way.
    Stack
    #1.5#00306EE9EE3A001A0000064F00003A28000422D070FB68FD#1164178553286#com.sap.portal.iView#sap.com/irj#com.sap.portal.iView#z10002722#42##asap86.symbol.com_NPQ_6376950#Guest#d2b1aed079f511db93d200306ee9ee3a#SAPEngine_Application_Thread[impl:3]_21##0#0#Error#1#/System/Server#Java###Connection Failed: Nested Exception. Failed to get connection. Please contact your admin. 
    [EXCEPTION]
    #1#com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: Nested Exception. Failed to get connection. Please contact your admin.
         at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewConnectionFailedException(SAPConnectorException.java:137)
         at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorConnectionFactory.getConnectionEx(SAPCFConnectorConnectionFactory.java:184)
         at com.symbol.intr.cs.authcheck.beans.AuthorizationChecker.getConnection(AuthorizationChecker.java:182)
         at com.symbol.intr.cs.authcheck.beans.AuthorizationChecker.connectionOK(AuthorizationChecker.java:79)
         at com.symbol.intr.cs.authcheck.beans.AuthorizationChecker.isAuthorizedRunCheck(AuthorizationChecker.java:294)
         at com.symbol.intr.cs.authcheck.beans.AuthorizationChecker.isAuthorized(AuthorizationChecker.java:289)
         at com.symbol.intr.cs.authcheck.main.Controller$MyController.onCheckAuthorizations(Controller.java:68)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
         at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115)
         at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Code
         protected IConnection getConnection(StringBuffer sb)
              throws Exception {
              Hashtable env = null;
              Context initctx = new com.sapportals.portal.prt.jndisupport.InitialContext(env);
              IConnectionSpec spec = connectionFactory.getConnectionSpec();
              spec.setPropertyValue("client", "095");
              spec.setPropertyValue("user", "Z10002722");//CPICR3Q095 - Chandu's ID: Z10002434
              spec.setPropertyValue("passwd", "initpass");
              spec.setPropertyValue("lang", "EN");
              spec.setPropertyValue("ashost", "157.235.1.24");//157.235.1.24 asap84.symbol.com
              spec.setPropertyValue("sysnr", "02");
              IConnection connection = null;
              try {
                   connection = connectionFactory.getConnectionEx(spec);
              } catch (Exception e1) {
                   StringBuffer exceptionMessage = new StringBuffer();
                   exceptionMessage.append("<font color='red'>");
                   exceptionMessage.append(
                        "<br>A connection to SAP could not be achieved.  ");
                   exceptionMessage.append(
                        "The possible cause is a bad definition of the connection ");
                   exceptionMessage.append(
                        "as loaded from the connection_specs.properties file.  ");
                   exceptionMessage.append("Please check this file.  ");
                   exceptionMessage.append("Check the user ID shown above and the password.  ");
                   exceptionMessage.append("Also, check the host and system number as shown above.");
                   exceptionMessage.append("</font>");
                   ILogger logger =
                        PortalRuntime.getLogger(IPortalConstants.IVIEW_LOGGER);
                   logger.log(e1, e1.getMessage(), Level.SEVERE);
    //               throw new ConnectionFailedException(exceptionMessage.toString());
                   throw new Exception(exceptionMessage.toString());
              return connection;
    Thanks!
    Regards,
    Kishore

  • Issues with migrating lookups from 9.0.3 to 9.2

    Below is a text from a TAR we've submitted with Oracle. Has anyone else run into this issue when upgrading from 9.0.3 to 9.2?
    Lookups conditions not being properly migrated is a known issue when upgrading from OWB 9.0.3 to 9.2,
    documented in Bug 3989847 - Generated Code Has Invalid Aliases After Upgrade From 9.0.3 to 9.2

    Did you try putting the toplinkProject.xml into the META-INF directory? Does the same error occur?

  • Web ADI on 11.5.10.2 Issue with migrating templates desktop ADI to WebADI

    Version 11.5.10.2
    Applied patches:
    7375915
    7350414
    3036401
    5853005
    11793768
    12700905
    Migrating FSG templates from desktop ADI to WebADI. When we open an existing template, we put the template name in the file and then upload we have the following issues:
    - The template does not have headers.
    - If we change the template at all, the columns get left justified instead of right justified.
    - numeric value is showing for date and time instead of standard format for date and time.
    - Column widths are not holding.
    - Cannot get column headings to show up.

    Have you applied all pre-req. patches?
    Please see the following docs and make sure you have all the patches applied.
    How To Determine Which FSG Patches Have Been Applied In Release 11i, 12.0 and 12.1 [ID 549289.1
    Unable To Publish Report In Excel After Applying Patches 7375915/7350414 [ID 789725.1]
    UNABLE TO VIEW OUTPUT WHEN PUBLISHING REPORT SET WITH CONTENT SET [ID 827461.1]
    Unable To Publish FSG Reports When Content Sets Are Used [ID 787289.1]
    How To Use Content Sets (Parallel Types) in Report Manager to Display FSGs in Multiple Workbooks [ID 881532.1]
    FSG: Error : Content Set ID Is Not Empty And It Is An FSG Submission When Using Content Set [ID 1294149.1]
    What Are the Patch Numbers for Prerequisites for Patch 5377946? [ID 945032.1]
    Fsg Column Headers Are Offset, Date Format is incorrect after applying FRM patches [ID 834860.1]
    Thanks,
    Hussein

  • Migrateinstance issues with migrating the suffix data.

    I am trying to use migrateinstance5 utility to migrate from iPlanet5.1 to SUN ONE 5.2.
    (Not using the SUN packages , but it is a separate installation from compressed archive on a SUN box)
    The data base of the sub-suffix is not getting migrated.
    I was able to find the reason why this data is not getting migrated. This is how it is happening:
    The main suffix name is say "o=mycompany" and the RDN of the sub suffix name is say "ou=sample".
    (subsuffix DN ou=sample,o=mycompany)
    The DNs of the database mappings under "cn=mapping tree,cn=config" are created differently in version 5.1 and Version 5.2.
    In version 5.1 the mapping for the suffix is : cn="ou=sample,o=mycompany", cn=mapping tree,cn=config
    where as in version 5.2 it is :
    cn=ou=sample\, o=mycompany, cn=mapping tree,cn=config
    Please note an extra space between \, and 'o' and also note in this case "ou=sample,o=mycompany" is one string (cn of the object - RDN)
    Since the RDN and hence the DN of the objects is different between versions the migrate instace script is not importing the database thinking the target sub-suffix (version5.2) is different from the source sub-suffix (5.1).
    I tried doing a modrdn on the new DN, it look like it is not permitted.
    I am able to import the data using ldif2ldap though.
    I was hoping that migrate instance will take care of it or I can work around it by modify the sub-suffix before running migrateinstance.
    Any thoughts OR work arounds , sans explicit import of data.
    Thanks

    Hi,
    why don't you just modify the new 99user.ldif file (add the linde with the attributes and objectclasses, delete the db number in EOF), export your old data and import them in the new directory? and then setup all your tuning and conf parameters.
    That's what work's the best.
    bye

  • Migrating from sun jvm to jrockit

    I have downloaded JRockit(jrockit-8.0-j2se1.4.1-win32.exe), and installed it on
    Windows 2000 and when I ran my application I got the following error message.
    Please advise ...
    java.lang.IllegalAccessError: _nrc
         at com.evermind[Orion/1.5.2 (build 10460)]._ah._upb(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljava.io.File;Lcom.evermind[Orion/1.5.2
    (build 10460)].util.ByteString;ZLcom.evermind[Orion/1.5.2 (build 10460)]._si;)V(Unknown
    Source)
         at com.evermind[Orion/1.5.2 (build 10460)]._cvb._uec(Ljavax.servlet.ServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown
    Source)
         at com.evermind[Orion/1.5.2 (build 10460)]._io._twc(Lcom.evermind[Orion/1.5.2
    (build 10460)].server.ApplicationServerThread;Lcom.evermind[Orion/1.5.2 (build
    10460)].server.http.EvermindHttpServletRequest;Lcom.evermind[Orion/1.5.2 (build
    10460)].server.http.EvermindHttpServletResponse;Ljava.io.InputStream;Ljava.io.OutputStream;Z)Z(Unknown
    Source)
         at com.evermind[Orion/1.5.2 (build 10460)]._io._gc(Ljava.lang.Thread;)V(Unknown
    Source)
         at com.evermind[Orion/1.5.2 (build 10460)]._if.run()V(Unknown Source)
         at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
    I'm using orion as application server.
    Thanks,
    Sunil

    This is actually an error in Orion. Try running with Sun's vm and
    the -Xverify option and you will see the same error. The reason this shows
    up with JRockit by default is that it has a higher level of verification
    than the Sun VM.
    For Orion 2.0, this has been filed as bug in their bug tracker system:
    http://bugs.orionserver.com/issue/view.jsp?id=1019
    Regards,
    /Staffan
    "Sunil" <[email protected]> skrev i meddelandet
    news:3e81f226$[email protected]..
    >
    I have downloaded JRockit(jrockit-8.0-j2se1.4.1-win32.exe), and installedit on
    Windows 2000 and when I ran my application I got the following errormessage.
    Please advise ...
    java.lang.IllegalAccessError: _nrc
    at com.evermind[Orion/1.5.2 (build
    10460)._ah._upb(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljava.io.File;Lcom.evermind[Orion/1.5.2
    (build 10460)].util.ByteString;ZLcom.evermind[Orion/1.5.2 (build
    10460)._si;)V(Unknown
    Source)
    at com.evermind[Orion/1.5.2 (build
    10460)._cvb._uec(Ljavax.servlet.ServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown
    Source)
    at com.evermind[Orion/1.5.2 (build
    10460)._io._twc(Lcom.evermind[Orion/1.5.2
    (build 10460)].server.ApplicationServerThread;Lcom.evermind[Orion/1.5.2(build
    10460)].server.http.EvermindHttpServletRequest;Lcom.evermind[Orion/1.5.2(build
    >
    10460)].server.http.EvermindHttpServletResponse;Ljava.io.InputStream;Ljava.i
    o.OutputStream;Z)Z(Unknown
    Source)
    at com.evermind[Orion/1.5.2 (build
    10460)._io._gc(Ljava.lang.Thread;)V(Unknown
    Source)
    at com.evermind[Orion/1.5.2 (build 10460)]._if.run()V(Unknown Source)
    at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
    I'm using orion as application server.
    Thanks,
    Sunil

  • Issues with migrated SHarePoint 2010 sites after Mount-SPContentDatabase command and claims powershell upodate

    Hi,
    I am getting issues when trying to access these new SharePoint 2010 Mode Web Applications I have migrated to SharePoint 2013. A record pointing to WFE Cluster OK. Problem is sometimes I get a blank page, sometimes I get prompted with a password, sometimes
    I get the site, but style is poor and sometimes I get a page that looks fine (it always takes a long time - there are ping issues). I have had a quick look around and noticed that this can be the Request Management Service. I have it running on all 3 WFE along
    with Distributed Cache. This is really worrying and it is having a big impact on me progressing.
    Any ideas. Reluctant to run some powershell commands some people have recommended as they could cock things right up.
    Thanks.
    John  

    Hi John,
    if you have load balancer you can stop Request Management.
    But my advice that you need to check the ULS logs, try to set the diagnostic logging to verbose and catch the errors in the logs and send them.
    Kind Regards,
    John Naguib
    Technical Consultant/Architect
    MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
    Please remember to mark your question as answered if this solves your problem

  • Issue with Migration of Users/groups in Essbase

    Hi,
    am trying to migrate the users specific to the application using Advanced option through Migration Wizard (EAS 716)..But i see the users with the application on old box and when i check it after migration, am not able to see the users related to that application..
    Moreover, i have copied the users specific to that application on old box into new box and after that tried of migrating the same application from old to new box...Even then am not able to see the users with application access..
    Is this the right approach which am following? or Kindly suggest me the best way of migrating users/groups...
    Thanks

    If you chose the advanced option, you should have no problem migrating users and groups along with the application. You probably may have omitted those groups or members from the list. When you migrate do not change anything except server, App and DB names.

  • Issue with Migration to New Mac from Old Mac

    I deactivated photoshop CS3 on my old mac, and I'm trying to get it over to my new mac via firewire but I'm getting this error message:  Licensing for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and the reinstalling this product or contacting your IT administrator or Adobe customer support for help. What can I do?

    Any Adobe Product must—beside deactivation and uninstalling from your old computer—be installed with the original Adobe installer and the appropriate serial number.
    Never use the program migration tools of Mac OS to migrate any Adobe software, it will not work.
    I suspect that CS3 is compatible with your computer, you will have to update to a current version of your program.

  • Bug: Pre 2 IMAP and Google sync issues with migrated 1.4.5 profile

    HI!
    I have a European (GSM) unlocked Pre 2 with webOS 2.0.1.
    The profile was migrated from a Pre Classic with webOS 1.4.5.
    After entering profile account, I had these problems:
    1.
    I had to enter my Google account password 3 times (got 3 notifications about that).
    2.
    Google contacts and Calendar sync did only work from Google to the Pre 2. After deleting and re-adding my Google account, it seems to work in both directions now.
    3.
    My IMAP (uwimap server) account did not recognize the special folders (sent, draft, trash). When using the same IMAP account with webOS 1.4.5, I had to enter "./" as folder prefix as a workaround to make it work.
    After migrating to the Pre 2, I had to delete an re-add the IMAP account. After that, it recognized the special folders without using the workaround.
    So, maybe webOS should delete and re-add all Google and IMAP accounts by itself during profile migration from 1.4.5.
    Thomas
    Post relates to: None

    Check out : http://forums.palm.com/t5/webOS-Software/strange-behavior-syncing-Pre2-Calendar-with-Google-Calendar...

Maybe you are looking for

  • Probelm in  addition of line item in ME21N

    Hi, I am working on a requirement where after providing the data for line item 1 of a PO (ME21N),  when the User presses enter, based on certain conditions a new line item should get added to the PO. Using the BADI ME_PROCESS_PO_CUST and Method Proce

  • Is there a view called V$SQL_MEMORY_USAGE?

    I am reading the Oracle 9i New Features (Database Administration part) from Oracle University technology-based training. It says there is a new view called V$SQL_MEMORY_USAGE. But I can't find it. When I tried to query as sys or system user, I got er

  • Simultaneous digital & analogue sound output

    Until recently I used to have a Powermac G5. I was able to have simultaneous sound output to the line out and digital sockets, but I find in my new Mac Pro (early 2008) this does not seem possible - you have to choose between internal speaker, line o

  • Manged Server not able to start.. default policy provider was not found.

    Hi All, SOA suiite 11.1.1.1.3.0 I am able to start admin server successfully. and while starting Managed server I am getting below error. I am trying to start managed server in cmd promt. could anyone pls suggest me to resolve this?? ####<Jun 5, 2013

  • JTable - active cell not highlited when editable

    Hello, I'm using JDK 1.4.2_05, and I'm seeing some behavior that seems a bit strange. In my JTables, some cells are editable, and others are not. When the user moves the active cell around (with the arrow keys, or TAB and RETURN) the non-editable cel