Issues with Tcode MM60

Hi,
The user is using Transaction code MM60 for extracting Material List based on Material Number and Plant.
After receiving the output data in SAP screen, the user is unable to export the same date in MS Excel by pressing CtrlShiftF7
We can download the same output to Excel onto Desktop, however unable to see the same in SAP Excel format.
We dont find any missing authorizations, however we evem tried with SAP_ALL profile still the issue remains the same.
Please advice.
Regards.

I had a similar problem with displaying data in Excel within SAP. This was resolved by making changes to settings in Excel depending on whether you are using Excel 2003 or 2007.
In Excel 2003:
use menu option Tools> Macro> Security--> there are two tabs:
Security level and Trusted partners. In the trusted partners tab make sure both checkboxes (trust access to VB content AND installed add-ins) are TICKED. This should most probably resolve the problem.
In Excel 2007:
Goto Excel Options. Select the Trust Center tab. Under Microsoft Office Excel trust Center click on the Trust Center Settings.
In the Trust Center Window select Macro Settings tab. Under that, enable Macros and tick Trust access to VBA project object model.
Hope this helps. This Solution is available on one of the SAP Notes. I can't remember which one though....
Regards,
Prashant

Similar Messages

Issue with Tcode Iviews

Hi Friends,
We have few tcode iviews created in our portal. Whenever we execute this iview they work fine. Whenever we try to attach any document to such iviews, system asks for user credentials. We need to remove this pop-up. Can anyone help on this?
Regards,
Shreya

Hi Arun,
The SSO has been performed between Portal and backend systems. We are facing issue only when we try to add attachment from our hard disk in tcode iviews. If we do not attach any documents, it does not ask for user credentials and everything works fine. Only when we click to attach docs, it asks us for user credentials.
Regards,
Shreya

Issue with VC/2 - not fetching the invoice details

Hi All,
We have an issue with TCode VC/2 in ECC 6. This is not fetching( not showing) the Invoice documents under the header "Last SD Documents".
It is fetching the sales documents like orders, credit memo/debit memo requests but not the invoice documents.
PLease help on this.
Thanks in advance.
Edited by: Harini Kesani on Jan 12, 2010 8:25 PM

Is it possible that 'last SD document' means 'last sales document', not 'last billing document'? Unfortunately, I'm unable to confirm - we don't use this transaction. You can also check what tables are used in this transaction (get help from an ABAPer or Basis) and then check if there is correct data in those tables. It might be using info structures or index tables, which may need to be populated first.

Issue with PP-PI report

Dear PP-PI Expert!
I already searched many forums on internet about this subject, but i have not got any answer about this issue
I want to collect the pp-pi datas which is inputed into SAP system with TCODE CO54, CO53,CO60,
The follow process is:
1.Generate Control recipe of Process Order(PO)
2.Use TCode CO53 , send Control Recipe
3.Use TCode CO60, find the PO which is sent control recipe, then open it for input pi-datas, if finish, we complete this
4.Use TCode CO54, send the complete pi-sheet .
now, we want to collect these pi-datas with ABAP, but i cannot determine where is PI-data store, what's table and what's function to get data ...
Right now, we only see PI-sheet data of only process order by process order , we cannot get datas for analysis and make decide.
so, Dear PP-Pi expert, pls help me to get out pi data for analysis.
I already ask the consultant, who is implement my system, but they did not know.
Thanks for your support!
TDiep.

Thanks Dario for your information.
But how can we get the datas that we already key in for PI-sheet.
I knew table POC_DB_VALUE content pi-datas, but i don't know how to get it out.
Could anyone help me!
Regards,
DiepNguyen.

Bussiness logic/technical flow for report with tcode MB5B

Guys,
Please send me any Functional Spec or Technical Spec of the standard SAP report with tcode MB5B ( Stock as on posting date). Any document explaining logic or technical flow is very much useful to me..I need to understand the logic and what are all the underlying tables used. I will assign more points to anyone who help me.

MB5B - Stock on posting date
The report Stock for posting date lists a company's own stocks in a particular time period (earliest date/Time 00:00, latest date/time 24:00).
The posting date is used for selection. Note that the posting date may be different from the entry date (date entered in the system) as well as the document date.
Starting with the current stock balance, the report uses the material documents to calculate the stock balance for the specified posting date.
Requirements
You need authorization to display material documents for all chosen plants (authorization object Material documents: plant, activity 03).
Output
Thisreport issues a list with the following information for each material:
Stock quantity and stock value on first date
Total and value of all receipts
Total and value of all issues
Stock quantity and stock value on last date
List of the material documents that were posted in the specified time period
To go to the detail screen for the material document item, place the cursor on a material document and choose Goto -> Document item
If you require more data and want a detailed evaluation, you can enhance the current layout or choose another existing layout via Settings -> Layout.
Tables Used :
t001; t001w; t001l; mchb, mbew,mseg.
Thanks

Issue with the material field in ME23N after upgrade

Hi Experts,
We are having an issue with transaction ME23N in ECC6.0 after upgrade from 4.6c.
In this transaction for the given PO the value of the material is not populating. The material coloumn is displaying but the value of the material is not coming.
For the same PO with the same data we are able to see the material number in ME23N in 4.6c.
Please help me to resolve this.
Thanks,
Rakesh

Hi,
If you are a functional consultant then check the configuration settings in SPRO and compare it with the one in 4.6c system to find if the material number display in ME23N is enabled in your new system or not. Go to tcode SPRO and Material Management-> Purchasing->Purchase Order->Define Screen Layout at Document level.
Execute this and select on ME21N or tcode that you are having problem with. Then press details button and double click on Enjoy fields. Check if it Display check box is ticked or not.
KR Jaideep,

Issue with scanners beeping on over picking material code

Hi ,
I have an issue with scanner beeping.User is working is Z tcode .
The followings are related steps.
(1)If the user does over-picking the material code , an “information” window like below is displayed, however, no beep sound is produced.
Information. Material code, ABC!@#% already updated for Delivery 1ASEDFD.
(2)Since the user has heard no beep sound, the user is unaware of the over-picking and scans the next item.
(3)Then, in case of XP PC, a louder noise, a kind of buzzer is generated, while in with Windows 7 PC, a small noise, a kind of chime is made.
(4)With Windows 7 PC, due to the small sound, the user continues the next step, being unaware of the over-picking. This has a risk of causing errors at the shipment: eventually, it impacts customers.
The requirement is beep sound will be heard on over-picking also.
Please suggest in this regard.
Thanks,
Harsh

Hi Harshavarddan,
there is some example on forum for generating beep sound with the use of the OLE Objects:
Try this code:
TYPE-POOLS: ole2.
DATA: return TYPE i,
       sapinfo TYPE ole2_object.
DATA: BEGIN OF command,
         command(12) TYPE c VALUE 'cmd /c echo ',
         hex07(1)    TYPE x VALUE '07',
       END OF command.
START-OF-SELECTION.
   CREATE OBJECT sapinfo 'SAPINFO' NO FLUSH.
   CALL METHOD OF sapinfo 'EXEC' = return
     EXPORTING
     #1 = command
     #2 = 0.
FREE sapinfo.
Regards,
Angelo.

Order management flow path with tcode in pp module

hi sap guru's,
i need the order management flow path with tcode in pp module.
regards,
muralidhar.t

Hi Murlidhar,
Step 1: Material Master
Logistics > Production > Master Data > Material Master > Material > Create General > Immediately MM01
Step 2: BOM creation
Logistics > Production > Master Data > Bills of Material > Bills of Material > Material BOM > Create CS01
Step 3: Work Center creation
Logistics > Production > Master Data > Work Center > ( New Screen ) Work Center > Create CR01
Step 4: Route creation
Logistics > Production > Master Data > Routings > Routings > Routing > Create CA01
Step 5: PIR Generation
Logistics> Production>production planning>demand management>PIR>Create MD61
Step 6: MRP Run
Logistics>Materials Management>Material planning>MRP>MRP>Total Planning>Online MD01
or
Logistics > Production > MRP > MRP > Sng-Item, Multi-Level MD02
Step 7: Evaluation through MRP list and Stock requirement list
Logistics>Materials Management>Materials Planning>MRP>Evaluations>MRP List>Individual Display MD05
Logistics>Materials Management>Materials Planning>MRP>Evaluations>Stock Requirements List MD04
Step 8: Conversion of Planned order to Production order
Logistics > Production > Production control > Order > Create > With a planned order CO40
or
Logistics >Production > Production control >Order > Create >With material CO01(For creating production order Without planned order)
Step 9: Order management
Logistics >Production > Production control >Order > Change >With material CO02
Step10: Confirmations
Logistics >Production >Production control >Confirmation >Enter >For order CO15
or
Logistics >Production >Production control >Confirmation >Enter >For Operation >For time ticket CO11N
Step11: Goods issue
1. Logistics >Production >Production Control >Environment >Goods Movement >Goods Issue
2. Logistics >Materials Management >Inventory Management >Goods Movement >Goods Issue MB1A--261Movement type
Step12: Goods receipt
Logistics > Production > Production Order > Environment > Material Movement > Post Mat to Stock
or
Logistics > Materials Management > Inventory Management > Goods Movement > Good Receipt > For Order MB31
Step13: Techo Or Close Order.
This can be done from Prduction. Order Header menu.
Regards,
R.Brahmankar

Issue with printing newly added operations in Production Order through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi,
1) Go to Tcode "OPK8"
2)Select LG02 "Op Control Ticket"
3) Double click on :List Control for Transactions" in the left hand menu tree
4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
Try this.

Issue with archiving (opentext) of adobe forms

Hi ,
We have an issue with archiving (open text) of adobe forms. When unfinished processes are restarted using Tcode /OTEI/PF_RESTART empty forms without data are archived. We are checking these forms using Tcode J6NY. PDF form is stored but data entered while processing the forms in portal is missing.
Any suggestion or help is highly appreciated.
Regards,
Kishore

Hi Prakash,
Do not use Data Binding tab to bind the Drop down,
Select Specify Item Values
There in binding tab specify binding and there are few more options to specify Item Text and Item Value.
Please find the below screenshot for the same.
Thanks & regards,
Rajkamal.

Issues with Purchase order change documents

Hi Gurus,
I have some peculiar issues with Purchase order. The PO line item has deletion indicator set but I can't find who set the deletion indicator. The PO change documents doesn't show anything related to deletion indicator.
Please help to fix the Issue.
Regards,
Senthil

Hi
Check it in Tcode SE16
Table Name CDHDR and CDPOS
Regards,
Raman

Facing issue with adding systems in SMSY - solution manager

Hi all,
    We are facing an issue with the solution manager in tcode smsy. When i create a system in the corresponding component say ECC with product version ECC6.0.The next screen shows that the <SID> has been added successfully. But when i navigate to the path and i unable to see the system SID which i have created.
   Again i have tried to create the same system with same SID, but it shows that " SID already exists "
   Also i need another suggestion, we have planned to add 60 systems in the same solution manager. Kindly suggest me , how many systems we can add in single solution manager in maximum and for configuring EWA ?
Thanks
Raj

Hi Raj,
You can delete the old system entry and then try creating the saem again..
Also while creating mention correct product and version and the installation number.
You can also use the assistant for this.
Have you added all your servers and DB?
regards,
Raja. G
Edited by: Raja Gunasekaran on Aug 28, 2009 1:26 PM

Issues with cache updates

Hi ,
I have some issues with runtime xi cache update.
i tested the RFC dest for connection RFC Dest - INTEGRATION_DIRECTORY_HMI.
that failed with HTTP 500 internal server error .
I even tried to update the cache from TCode - sxi_cache
the error i got there was
Prefix number: entry missing for system XI1 client 200
If anyone has any idea as to why is such an error occuring
Thanks
Nikhil

Hi
<i>that failed with HTTP 500 internal server error .</i>
is not an error
Please can you check on this thread:
XI Runtime cache error: Cache contents are obsolete
Regards
Vijaya

Issue with settlement of prod. order (KO88)

Hi Friends,
We are facing a issue while settlement of prod order using with tcode KO88.
In production Order, the distribution rule is created for account assignment category MAT (material) with settlement type PER (periodic settlement). We have added category CTR (cost center) with type PER to distribute percentages as 50% & 50%.
When we check the distribution rules in Production order system says its OK with-out error but when same is settled with KO88 system shows an error "Settlement type PER: Total percentage in distribution rules <> 100%".
Please help.
Regards,
Rohit

Hi Siva,
I looked into this OSS note and seems to be relevant for this error.
Thanks for the reply and i am closing this thread.
Regards,
Rohit

Performance issue with BW Extractor 0CRM_SRV_PROCESS_H

Hi There,
We have a serious performance issue with BW extractor 0CRM_SRV_PROCESS_H in CRM . We recently applied SAP Note: 1330249 to optimise the performance, Even after applying the note it remains slow, Please can any one update the solution if they had same issue with this Extractor or know about this issue.
Thanks,
R

Hi Ramesh,
There are some instructions available in note 1330249 that shoul help you.
I don't know what is the current release in the system, but there are corrections to be implemented by Tcode SNOTE and also manual steps(in table SMOFPARSFA).
I hope it contributes.
Regards,
Sinara Moraes

Issues with Tcode MM60

Similar Messages

Maybe you are looking for