Issues with Using Data Dashboard and Using Web Service

After running a system for many months it has suddenly decided to not work at all. I am using Data Dashboard to read variables on a host. I'll outline the system here to get a baseline:
I'm running LV 2012 SP1 f5.
I collect data from one Ethernet port and interfact it to another Ethernet port to form a proxy.
I use a fixed IP address from my DSL along with port forwarding/port triggering in my router for data observation and control.
So, what have I done so far?
1. Repaired my original LV 2012 SP1 and tested system.
2. Upgraded to LV 2012 SP1 f5 and tested system.
3. Ran service.msc and checked all the NI services that should be operational. Started and stopped several of them and rebooted computer.
4. Deployed all my SVs (multiple times)
5. Disconnected second Ethernet interface becasue sometimes the variables would deploy to this IP address.
6. Turned off my wireless because sometimes the variables would deploy to this IP address.
7. Checked "Web Server Configuration" "Application Web Server" for correct port number.
8. Checked "Web Services Management" and under "Deployed Web Services" there is one category: SV is marked as running. NOTE!! WebService is NOT listed and this could be a problem
I can use the following to retrieve data&colon; localhost:<port number>/sv/variable. But when I substitute my DSL IP number, I can no longer get any data.
So, what am I missing?
Thanks,
Paul.

Siana,
Thanks for your response.
I haven't touched the NI code in months. It is running on an XP laptop and I have the Windows updates turned off. McAfee is running on it and of course that updates regularily. This laptop is a dedicated machine that I only use for this function, nothing else. I haven't added or subtracted any programs for many months.
There have been no changes to the DSL from me. AT&T is constantly trying to get us to upgrade to U-Verse but we have resisted. All DSL modem and router hardware is the same.
Confusing, huh?

Similar Messages

Issues in using web service proxy

Guys,
I have created a web service proxy using jdeveloper 11g. I'm tried to call the web service. But my output is not getting populated as expected. I mean the objects on the response object is not getting populated as expected.
I guess there is a issue with attributes having nillable=true or minoccurs , maxoccurs..
Is there any known issues and workaround solutions for this?
Any help would be appreciated.
Below is my schema file:
<schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:tns="http://www.baseops.com/QuotePrice" targetNamespace="http://www.baseops.com/QuotePrice">
<element name="QuoteListCollection">
<complexType>
<sequence>
<element name="Quote" maxOccurs="100">
<complexType>
<sequence>
<element name="customerId" type="decimal"/>
<element name="fuelingLocationId" type="decimal"/>
<element name="inventoryItemId" type="decimal"/>
<element name="flightType" type="string"/>
<element name="customerSiteId" type="decimal" nillable="true" minOccurs="0"/>
<element name="domesticOrIntlIndicator" type="string"/>
<element name="quantity" type="decimal"/>
<element name="action" type="string"/>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
</element>
<element name="QuoteListCollectionResponse">
<complexType>
<sequence>
<element name="PriceLocation">
<complexType>
<sequence>
<element name="locationId" type="decimal"/>
<element name="status" type="decimal"/>
<element name="FboCollection" type="tns:fbo" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
</element>
<complexType name="fbo">
<sequence>
<element name="locationId" type="decimal"/>
<element name="fbo" type="string" />
<element name="fboId" type="decimal" nillable="true"/>
<element name="supplier" type="string" nillable="true"/>
<element name="supplierId" type="decimal" nillable="true"/>
<element name="deliveryMethod" type="string" nillable="true"/>
<element name="priceExpirationDate" type="dateTime" nillable="true"/>
<element name="domesticOrIntlIndicator" type="string" nillable="true"/>
<element name="inputQty" type="decimal" nillable="true"/>
<element name="totalFBOPrice" type="decimal" nillable="true"/>
<element name="fuelStructureCollection" type="tns:fuelStructure" maxOccurs="20"/>
</sequence>
</complexType>
<complexType name="fuelStructure">
<sequence>
<element name="fuel" type="string"/>
<element name="fromQty" type="decimal"/>
<element name="toQty" type="decimal"/>
<element name="totalUSPrice" type="decimal"/>
</sequence>
</complexType>
</schema>
Below is my wsdl file:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions
name="getBaseOpsQuotePriceList"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/Enterprise-SOA/entBaseOpsFuelQuote/getBaseOpsQuotePriceList"
xmlns:client="http://www.baseops.com/QuotePrice"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/db/Enterprise-SOA/entBaseOpsFuelQuote/getBaseOpsQuotePriceList"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
>
<wsdl:documentation>
<abstractWSDL>http://mia-lap-d03.wfs.com:8012/soa-infra/services/default/entBaseOpsFuelQuote!1.0/GetBaseOpsQuotePriceList.wsdl</abstractWSDL>
</wsdl:documentation>
<plt:partnerLinkType name="getBaseOpsQuotePriceList_plt">
<plt:role name="getBaseOpsQuotePriceList_role">
<plt:portType name="tns:QuoteProcess"/>
</plt:role>
</plt:partnerLinkType>
<wsdl:types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://www.baseops.com/QuotePrice" schemaLocation="QuotePrice.xsd"/>
</schema>
</wsdl:types>
<wsdl:message name="QuoteProcessRequestMessage">
<wsdl:part name="payload" element="client:QuoteListCollection"/>
</wsdl:message>
<wsdl:message name="QuoteProcessResponseMessage">
<wsdl:part name="payload" element="client:QuoteListCollectionResponse"/>
</wsdl:message>
<wsdl:portType name="QuoteProcess">
<wsdl:operation name="process">
<wsdl:input message="tns:QuoteProcessRequestMessage"/>
<wsdl:output message="tns:QuoteProcessResponseMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="QuoteProcessBinding" type="tns:QuoteProcess">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="process">
<soap:operation style="document" soapAction="process"/>
<wsdl:input>
<soap:body use="literal" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/Enterprise-SOA/entBaseOpsFuelQuote/getBaseOpsQuotePriceList"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/Enterprise-SOA/entBaseOpsFuelQuote/getBaseOpsQuotePriceList"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="GetBaseOpsQuotePriceList">
<wsdl:port name="QuoteProcess_pt" binding="tns:QuoteProcessBinding">
<soap:address location="http://soad2.wfs.com:8012/soa-infra/services/default/entBaseOpsFuelQuote/GetBaseOpsQuotePriceList"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

bumping again...

Issue: SOAMANAGER using Web service in ECC 6.0

Hi Experts,
I created a WebService in SAP ECC6.0 using a Remote enabled function module which has one input field and Six output fields.
In ECC 6.0 WSCONFIG,WSADMIN and LPCONFIG Tcodes are obsolete .So i have using tcode SOAMANAGER settings like Applications and Scenario Communications->Single Service Administrater-> link i have searched my newly created Webservice ->Apply settings ->Open Web Service navigator for selected binding -> getting URL and XML code on that..
Let me know any configuratons or authorizatio in my SOAMANAGER to test WS.or How to setup the WSNAVIGATOR for this scenario.
Regards,
Samruth.

Hi,
if you have created WS for RFC FM then and you just want to test it then you can use program ESD_TEST_TOOL.
execute this program and provide the WS name. it willl show request tab. you will have button XML editor. click it and provide the input value and then execute it.
The test result will be displayed in Response tab.
Thanks,
Chandra
<removed by moderator>
Edited by: Thomas Zloch on Oct 5, 2011 2:23 PM

Sudden onset issue with eprint & enabling any app or web services

Hello everyone,
I have a case in with HP, and have spent 4+ hours on the phone with the eprint support folks and the corporate support folks. Unfortunately they are now gone for the weekend, and I am still stuck here with a nonfunctioning system - and need to leave this weekend on business (need a functioning business printer!)
I am hoping someone here can help.
I have a x576dw MFP
Connected hardwired to a Netgear router
Worked great with eprint services (configured and printing daily) for 1+ month
11pm last night I sent several jobs to the printer and noticed today they weren't there. I checked the printers web print server, and found that the IP settings had not changed (of course) from when it worked the day before. The same IP, same DNS, same default gateway etc.
I ran through all of the scenarios/fixes I could find online, from changing to wireless and testing, changing to wired and testing with DHCP, changing to wired & testing with static but a different IP outside of the DHCP range, changing the router that the printer sits on (I have 3 routers), changing the link config, changing the primary and secondary DNS to only be the two Google addresses (8.8 and 4.4), etc etc etc.
ePrint ran through (frustratingly) exactly the same steps with me and decided it was a printer issue. They handed me off to the corporate guys who (of course) wanted to do yet exactly those same steps. I did just to get through it.. (note I can print fine on the LAN from all routers), and at the end the support tech told me to try a restore to defaults and start over again.
Did that (gr) - same error. When I go to even enable eprint or apps it says "Web Services could not be enabled." I get the same error on the web interface for the printer.
Help! Im at a total loss here and HP wants to blame the eprint team, the eprint team wants to blame corporate solutiosn HP!
(Other notes.. I did check firmware, it's up to date. I did check web software, also up to date)
Frustrated tired business chick!
This question was solved.
View Solution.

Hi, Excited that we got it working.
I'll contact you about getting the failed unit back from you. We are going to have it sent to an R&D Facility.
HP Product Expert for the Officejet Pro X Series.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!

How to make link between xcelsius components with sap data using Web servic

Hi all,
I have a doubt regarding connection between Xcelsius components and SAP data.
I created one Web service using Function module and made a connection between xcelsius and that web service using binding URL. It shows imput and output parameters perfectly.
But I cant get any idea as to how to connect Xcelsius components with these parameters.
Can anybody help me out..
please its urgent.
Thanks,
Simadri

Have you bound your output parameters to ranges of cells? Select the item, then click the icon to the right of the Insert In: box and select the cells.
Add a spreadsheet component to your chart and bind it to the cells, then preview the model. Do you see the data coming through?
If you do, then you can click File > Snapshot > Export Excel Data. Then close Preview mode, and import data from spreadsheet and select the sheet you just exported. This gives you real data to work with when designing the dashboard.
Hope that helps.

Using web services with flash cs3 and actionscript 3.0

Hi,
I want to use web services under flash cs 3 and by using as
3.0.
It was possible with as 2.0 to do it easily thanks to the
webservice Connector.
But I can't find how to use web services under flash and as
3.0.
I thought web services took part of the many improvements
flash cs 3.0 contain, but obviously it does not:(
Can anybody help me to use webservices with flash cs 3 and as
3.0?
Thanks in advance,
Pascal

Dark Armor, You mentioned the book Adobe Flash CS4 Professional Classroom in a Book, which I have. I could not find anything in there. Did you mean to say Actionscript 3.0 for Adobe Flash CS4 Professional? I do have that book and it looks like there is information there. Just wanting to make sure that you meant what you said. Thanks!

Issue using web-service with forms9i

using web-service with forms9i
Hi
I have a setup of oracle9ias release 2 on solaris machine. I have made a web-service which is deployed on nt machine on weblogic server. I have made a call from my form (forms9i) to this web-service. When i try to use that web-service after deploying my form on solaris, it initializes the web-service and performs the action successfully. Now the problem is that my form also makes a call to report server to generate a report. The problem is when i initialize the web-service and uses its function it works but after that making a call to report server will fail. Also if i make a call to report server first, it generates the report and then i make call to the web-service, then that web-service fails to run. And in both cases, the forms application stops saying session has aborted.
Why cant i make call to both the things in one session of application? What could be the reason for that? Need help urgently.

Sorry,
I didn't know that this was necessary to find a solution.
Here are the definition out of the WSDL File:
<xsd:complexType name="ZS_EQART_RANGE_LINE">
     <xsd:sequence>
          <xsd:element name="SIGN" type="tns:char1"/>
          <xsd:element name="OPTION" type="tns:char2"/>
          <xsd:element name="LOW" type="tns:char10"/>
          <xsd:element name="HIGH" type="tns:char10"/>
     </xsd:sequence>
</xsd:complexType>
Thanks for Help
Ron

Are there any issues with using OS X Mavericks and Premiere CC?

Are there any issues with using OS X Mavericks and Premiere CC?

Official statement: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Peter Garaway
Adobe
Premiere Pro

How can i records with date format using web services?

Hello
I can't record date records using web services. I get no message errors.
I can import string values but no dates (YYYY-MM-DD). Do you have any clue about that?
Regards
Arturo

hello,
That's the code I'm using to update an opportunity. In the date fields (e.g. dFecha_de_entrega_al_cliente) I've tried to put an specific date in the correct format (If i put it in another format i've got an error message due the wrong format). The CRM accepted the code but it didn't update the values that are different of string.
I don´t know if there is something missing in teh program or if the developer environment is not the adequate.
Regards for your comments
Arturo
Private Sub ActualizarOportunidad(ByVal fila As Data.DataRow, ByVal TipoPersona As String)
Dim oLog As New Log()
Dim IdLog As Integer
Dim NumSerie As String = ""
Try
oLog.Insert_Log("Activación Garantía - Crear Oportunidad", oLog.GetLastIdProceso())
IdLog = oLog.GetLastId()
Dim sr_input As Opportunity.OpportunityUpdate_Input
Dim sr_output As Opportunity.OpportunityUpdate_Output
sr_input = New Opportunity.OpportunityUpdate_Input
Dim sr(1) As Opportunity.OpportunityData
sr(0) = New Opportunity.OpportunityData
NumSerie = fila("NumeroSerie").ToString().Trim()
sr(0).ExternalSystemId = NumSerie
sr(0).OpportunityName = fila("NumeroSerie").ToString().Trim()
sr(0).SalesStage = "Deseo" '"Cerrada/Ganada"
sr(0).dFecha_de_entrega_al_cliente = fila("FechaEmision").ToString().Trim()
sr(0).dFecha_de_facturacin_al_cliente = fila("FechaCompra").ToString().Trim()
sr(0).stNro_Factura = fila("NumeroFactura").ToString().Trim()
sr(0).plActividad_Economica = fila("IdActividad").ToString().Trim()
sr(0).plTipo_de_Venta = fila("TipoCompra").ToString().Trim()
sr(0).CustomObject8ExternalSystemId = fila("ApellidoVendedor").ToString.Trim()
'sr(0).CustomObject8ExternalSystemId = IIf(TipoPersona = "J", fila("DocumentoE").ToString().Trim(), fila("Documento").ToString.Trim())
'sr(0).CustomObject7ExternalSystemId = fila("")
Dim lofsr As Opportunity.ListOfOpportunityData
lofsr = New Opportunity.ListOfOpportunityData
lofsr.Opportunity = sr
sr_input.ListOfOpportunity = lofsr
sr_output = oOpportunity.OpportunityUpdate(sr_input)
oLog.Update_Log(IdLog, "Si", NumSerie, "")
Catch ex As SoapException
Me.txtError.Text = ex.Detail.InnerText.ToString()
oLog.Update_Log(IdLog, "No", NumSerie, ex.Detail.InnerText.ToString())
End Try
End Sub
************************************************************************

Issues with Bex query structures and Crystal Reports/Webi

Hi experts,
I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
Budget $
Budget %
Actual $
Actual %
Budget YTD
etc
if I drag the structure into the Crystal Report detail section with a key figure it displays like this
Budget $     <null>
Budget %     <null>
Actual $     300
Actual %     85
Budget YTD     250
the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
Actual $     300
Actual %     85
Budget YTD     250
Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
Business Objects Edge 3.1 SP2
SAP Int Kit SP2
OS: Linux
BW 701 Level 6
Crystal Reports 2008 V1
Thanks
Keith

Hi,
Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
ingo

Issues with using relative links in Captivate 8

Is anyone else having issues with using relative links in Captivate 8? These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the situation... We have courses that are made up of multiple lessons which as separate Captivate files. Within those lessons are buttons to link to external documents (which live in a shared document folder), demonstrations, etc. We use relative links because we post these to our amazon servers and we also sell them to clients where they can post them on their own web servers or in their LMS. SO we can't put in full paths for the links or we'd have to change them constantly. So an example is that the link for a button might be "../Document/nameofdoc.pdf" This would be going to a user guide or something that is posted in the "Document" folder that lives at the same level as the lesson's folder. But now, all of the sudden, none of our bazillion links is working. And I've tried buttons, hyperlinks, and even the old click box. Nothing works with relative links. And I did check the permissions on every file and folder on our Amazon server to verify nothing changed there as well. Any suggestions?

I have the same issue with relative links using Captivate 8. I am trying to load Captivate modules into an LMS using relative links to document files within the LMS. The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
Help?

Using Web Service as Data source (Pluggable Data Source) in Oracle Reports

Anyone using Webservice as a pluggable data source in oracle 10g reports.(Report builder version:10.1.2.0.2)? We need to be able to use web service as one of the data source to create reports.Tried the following and ran into issues:
Imported the wspds.jar fle from oracle plugin exchage. When tried using it received the following error in oracle reports trace file.
04/26 22:27:22 java.lang.NoSuchMethodError: oracle.xml.parser.schema.XSDBuilder.build([Loracle/xml/parser/v2/XMLDocument;Ljava/net/URL;)Ljava/lang/Object;
By troubleshooting issue found out that xmlparserv2.jar in 10g is newer than xmlparserv2.jar in 9i. wspds.jar is using xmlparserv2.jar in 9i as it was developed and tested for 9i only. Believe there is no newer wspds.jar file developed specifically for 10g?
Is there a better/standard solution to use webservice as data source in oracle 10g reports? Does later version of oracle reports supports webservice as a data source without any additional plugins? Any suggestion would be helpful.

Please provide support for the above request.
It appears that Oracle 10g reports doesn't support Web Service as pluggable data source. Is this option is available in Oracle 11g Reports or Oracle Discoverer Or OBIEE?

Novice Help with Creating Opportunities Using Web Services 2.0

Hello,
I recently took over our CRM integration services and was asked to push some data via our custom portal.
We use our portal to automate the creation of new opportunities in our Oracle CRM System.
The code was developed using Web Services 1.0
I was recently asked to add data to the "Parent Opportunity" field upon creation of a new Opportunity. Now I may be mistaken and if I am I will be very pleased, but it seems to me this field isn't available in 1.0
If I am mistaken and there IS a way to push data to the "parent opportunity" field using 1.0 Please completely disregard what I have typed below.
Upon looking at the WSLD for 2.0 I see "ParentoptyID" as an available field.
I took it upon myself to try and move this process over to 2.0 but I have hit a few major stumbling blocks. Here is the working code for 1.0:
Public Function CRMAddFinalShipmentOpportunity2(ByVal Session As Session, ByVal Subject As String, ByVal Type As String, ByVal Priority As String, ByVal Account As String, ByVal DueDate As String, ByVal Status As String, ByVal Description As String, ByVal AnnBudget As String, ByVal oppType As String, ByVal partNumber As String, ByVal currency As String, ByVal Territory As String, ByVal Owner As String, ByVal Opp As String) As String
Dim opportunity As nkkcrm.SiebelOpportunity20.Opportunity = New nkkcrm.SiebelOpportunity20.Opportunity
Dim input As New nkkcrm.SiebelOpportunity20.OpportunityInsert_Input
Dim results As New nkkcrm.SiebelOpportunity20.OpportunityInsert_Output
Dim strPriority As String = "1-High,2-Medium,3-Low"
Dim strType As String = "Call,Correspondence,Email,Event,Final Shipment - Book,Final Shipment - Special,Lead Follow-Up,Meeting,Opportunity Follow-Up,Other,Presentation,Quote Follow-Up,Sample Follow-Up,Service Request Follow-Up"
Dim strStatus As String = "Completed,Deferred,Waiting For Someone Else,In Progress,Not Started,Assigned,In Call"
CRMAddFinalShipmentOpportunity2 = ""
' Validate Data (CRM will validate if owner is valid)
If Owner = "" Then
AddError("Error: Missing Owner")
Exit Function
End If
If Subject = "" Then
AddError("Error: Missing Subject")
Exit Function
End If
If strType.IndexOf(Type) < 0 Then
AddError("Error: Invalid or Missing Type")
Exit Function
End If
If strStatus.IndexOf(Status) < 0 Then
AddError("Error: Invalid or Missing Status")
Exit Function
End If
If strPriority.IndexOf(Priority) < 0 Then
AddError("Error: Invalid or Missing Priority")
Exit Function
End If
If Not IsDate(DueDate) Then
AddError("Error: Invalid or Missing DueDate")
Exit Function
End If
Try
opportunity.Url = Session.GetURL()
opportunity.CookieContainer = Session.GetCookieContainer()
'Create the opportunity
Dim tmpAry(0) As nkkcrm.SiebelOpportunity20.Opportunity
input.ListOfOpportunity(0) = tmpAry
input.ListOfOpportunity.SetValue(New nkkcrm.SiebelOpportunity20.Opportunity, 0)
'Assign the opportunity Properties
input.ListOfOpportunity(0).Owner = Owner
input.ListOfOpportunity(0).OpportunityName = Subject
input.ListOfOpportunity(0).AccountName = Account
input.ListOfOpportunity(0).SalesStage = "Rebuy"
input.ListOfOpportunity(0).CloseDate = Date.Today
input.ListOfOpportunity(0).Territory = Territory
input.ListOfOpportunity(0).stProject_Name = "FINAL SHIPMENT REBUY"
input.ListOfOpportunity(0).SourceCampaign = "Rebuy"
input.ListOfOpportunity(0).OpportunityType = oppType
input.ListOfOpportunity(0).Revenue = AnnBudget
input.ListOfOpportunity(0).Description = Description
input.ListOfOpportunity(0).bRebuy = "Y"
input.ListOfOpportunity(0).ProductInterest = partNumber
input.ListOfOpportunity(0).plCurrency_Type = currency
'input.ListOfOpportunity(0).ParentoptyId = Opp
'insert the opportunity
results = opportunity.OpportunityInsert(input)
If results.ListOfOpportunity.Length > 0 Then
CRMAddFinalShipmentOpportunity2 = results.ListOfOpportunity(0).OpportunityId
End If
Catch webex As WebException
AddError(webex.Message)
Catch ex As Exception
AddError(ex.Message)
End Try
End Function
What changes might I need to make in order to make this function correctly using Web Services 2.0?
Currently I get the following errors- For every line of input.ListOfOpportunity(0) I get: '..cannot be indexed because it has no default property.'
Another example of an issue I'm running into is: 'SetValue' is not a member of 'nkkcrm.SiebelOpportunity20.ListOfOpportunityData'

We were able to make this work by re-modeling my code after a code sample I found that creates new Activities.
Here's my code in case it helps someone scanning these forums in the future (Disregard the Opportunity entries that are missing when you compare this to my earlier code- Those weren't relevant to making this work or not work, I simply am not using them now.):
Public Function CRMAddFinalShipmentOpportunity2(ByVal Session As Session, ByVal Owner As String, ByVal Subject As String, ByVal Type As String, ByVal Priority As String, ByVal DueDate As String, ByVal Status As String, ByVal Description As String, ByVal POValue As String, ByVal oppType As String, ByVal partNumber As String, ByVal currency As String, ByVal servername As String, ByVal pass As String, ByVal usrname As String) As String
'Get SessionID
Dim sessionId As String
sessionId = getSessionLogin(usrname, pass, servername)
Dim Opportunity As nkkcrm.SiebelOpportunity20.Opportunity = New nkkcrm.SiebelOpportunity20.Opportunity
Dim OppInput As New nkkcrm.SiebelOpportunity20.OpportunityInsert_Input
Dim OppOutput As New nkkcrm.SiebelOpportunity20.OpportunityInsert_Output
Dim strPriority As String = "1-High,2-Medium,3-Low"
Dim strType As String = "Call,Correspondence,Email,Event,Final Shipment - Book,Final Shipment - Special,Lead Follow-Up,Meeting,Opportunity Follow-Up,Other,Presentation,Quote Follow-Up,Sample Follow-Up,Service Request Follow-Up"
Dim strStatus As String = "Completed,Deferred,Waiting For Someone Else,In Progress,Not Started,Assigned,In Call"
'Validate Data (CRM will validate if owner is valid)
If Owner = "" Then
AddError("Error: Missing Owner")
Exit Function
End If
If Subject = "" Then
AddError("Error: Missing Subject")
Exit Function
End If
If strType.IndexOf(Type) < 0 Then
AddError("Error: Invalid or Missing Type")
Exit Function
End If
If strStatus.IndexOf(Status) < 0 Then
AddError("Error: Invalid or Missing Status")
Exit Function
End If
If strPriority.IndexOf(Priority) < 0 Then
AddError("Error: Invalid or Missing Priority")
Exit Function
End If
If Not IsDate(DueDate) Then
AddError("Error: Invalid or Missing DueDate")
Exit Function
End If
'Instantiate OpportunityData
Dim objListOfOpportunity As nkkcrm.SiebelOpportunity20.ListOfOpportunityData
Dim objOpportunity As nkkcrm.SiebelOpportunity20.OpportunityData()
Try
objOpportunity = New nkkcrm.SiebelOpportunity20.OpportunityData(0) {}
objListOfOpportunity = New nkkcrm.SiebelOpportunity20.ListOfOpportunityData()
objOpportunity(0) = New nkkcrm.SiebelOpportunity20.OpportunityData
'Assign the opportunity Properties
objOpportunity(0).Owner = Owner
objOpportunity(0).OpportunityName = Subject
objOpportunity(0).AccountName = "UNKNOWN"
objOpportunity(0).SalesStage = "Rebuy"
objOpportunity(0).CloseDate = Date.Today
objOpportunity(0).Territory = "North America"
objOpportunity(0).stProject_Name = "FINAL SHIPMENT REBUY"
objOpportunity(0).SourceCampaign = "Rebuy"
objOpportunity(0).OpportunityType = oppType
objOpportunity(0).Revenue = POValue
objOpportunity(0).Description = Description
objOpportunity(0).bRebuy = True
objOpportunity(0).ProductInterest = partNumber
objOpportunity(0).plCurrency_Type = currency
'Connect the Opportunity to ListOfOpportunity
objListOfOpportunity.Opportunity = objOpportunity
'Connect ListofOpportunity to Input Parameter
OppInput.ListOfOpportunity = objListOfOpportunity
Opportunity.Url = servername & "/Services/Integration;jsessionid=" & sessionId
'Opportunity.CookieContainer = Session.GetCookieContainer()
Opportunity.OpportunityInsert(OppInput)
Return "success"
Catch webex As WebException
AddError(webex.Message)
Catch ex As Exception
AddError(ex.Message)
End Try
End Function
Public Function getSessionLogin(ByVal usrname As String, ByVal pass As String, ByVal servername As String)
Dim loginurl As String = servername & "/Services/Integration?command=login"
'MessageBox.Show(loginurl);
Dim req As HttpWebRequest = DirectCast(WebRequest.Create(loginurl), HttpWebRequest)
' username and password are passed as HTTP headers
req.Headers.Add("UserName", usrname)
req.Headers.Add("Password", pass)
' cookie container has to be added to request in order to
' retrieve the cookie from the response.
Dim cookie As Cookie
req.CookieContainer = New CookieContainer()
' make the HTTP callby
Dim resp As HttpWebResponse = DirectCast(req.GetResponse(), HttpWebResponse)
If resp.StatusCode = System.Net.HttpStatusCode.OK Then
' store cookie for later...
cookie = resp.Cookies("JSESSIONID")
If cookie Is Nothing Then
Return "invalid session"
End If
Return cookie.Value
Else
Return "invalid session"
End If
End Function

Calculations in Xcelsius using data generated by a Web Service Connection

Hi,
I have set up a web service connection to pull in 4 columns of data: 1. CATEGORY 2. SUBCATEGORY 3. PRODUCT TYPE   4.#OFCALLS. There will be anywhere from 1 to 500 rows of data depending on day of week and time of day. The web service sorts the list by #OFCALLS descending. The OUTPUT VALUES of the web service connection are mapped to cells A19:D518.
Formulas in the spreadsheet take the Top 10 from the list and populate it to cells A4:D13. A formula in cell D15 sums the #OFCALLS for the entire web service connection output (A19:D518).
The data in A4:D15 is mapped to a spreadsheet table on my canvas.   When the report generates, the data from the TOP 10 of the web service connection populates properly, but the cell that should reflect the TOTAL#OFCALLS (D15) shows zero.
Is it not possible to do additional calculations in the spreadsheet based on data generated by the web service connection? A major difference between using an XML Map and a Web Service Connection is the XML Map actually populates the spreadsheet with the new data when it is refreshed. The Web Service connection data never actually appears in the spreadsheet itself, even though it updates to the appropriate vessel on the canvas.   This makes me think that no additional calculations can be done in the spreadsheet based on the web service connection data.
Can anyone tell me if that is correct? If so, then the web service connection would also have to pull in the TOTAL#OFCALLS along with the other data.   This would also seem to greatly limit what you could do with data generated by a web service connection, so I am hoping I am wrong and just don't understand how to do this.
Can anyone clarify this for me? If I failed to give any pertinent info let me know what it is, and I will update my post.
Thanks!

I have seen similar behavior as well. I have live data coming into Xcelsius from a data connection.
A supported Excel formula
=IF(ISBLANK(J2),I2,VALUE(TODAY()-J2))
is then applied to one of the columns to create an additional derived column.
Taking a snapshot of the data shows that the derived column is being populated, however the controls I've tried hooking up to the derived column (charts and labels) are always empty.
Information on whether this is supported would be appreciated.
Thank you,
David

Performance issue with using buffering in a APPL0 or APPL1 Table

Hi,
Can anyone please tell me whether there's any serious performace issue with using buffering for a Master or Transaction table? I'm asking this because when I run code inspector for my transp table I'm getting information message:
Message Code 0011 ==> Buffereing is Activated but Delivery Class Is "A" and Message Code 0014 ==> Buffereing is Activated but Data Class Is "APPL1".
So what's other way round for improving performance.
Thanks,
Mahesh M.S.

Hi,
have you read the documentation?
Let me paste it here for you:
Buffering is switched on for the examined table and it has data type 'APPL0' or 'APPL1'.
Tables with data type 'APPL0' or 'APPL1' should contain master or transaction data, so these tables should either contain a large amount of data or their content should change frequently. Therefore buffering the table is unfavourable. Very large tables suppress other tables in the buffer memory and hence slow done any access to them. Transaction data should not be buffered because the synchronization of the changes on the various application servers is very time consuming.
In exceptional cases, small master data tables ('APPL0', size category 0) can be buffered.
The solution depends on the table content. If it is master or transaction data, the table should not be buffered. If the table content does not consist of master or transaction data, the data type should be corrected accordingly.
This should answer your questions...
Kind regards,
Hermann

How to do Bulk data transfer using Web Service

In my application I have to write various web services but majority of the web service has to
query database and return back bulk data(rows>10K) through web service.
So I would like to ask what is the efficient way of transferring bulk data using web service as presently
Iam returning the dataset as xml String (using StringBuilder) from web service and consuming the same at client end.
Is there a better way to this in web service?
My env:
Front end can be in any other technology ,UI like C#
Back end : Tomcat 6 on Java 6 with Axis2
Thanks in advance

Innova wrote:
But then also I have to mention a return type although its xml that is getting transferred.
Can you provide me a with a small sample code.Like if I have Emp obect with properties
Empname,EmpID,DOJ,DOB,Dpt . In this case what will be the return type.
My major concern is that my resultset is going to be huge in terms of >10,000 rows so
that much time for formation of xml and then the transfer so how can I reduce the transfer
time ,I meant a faster optimised approach for transferring large data as part of web service.
Simply putting , how can I transfer bulk data in minimum time so that I can reduce the
waiting time at client side for the response.
Thanks in advanceI've done this with thousands before now, and not had a performance problem...at least nothing worth writing home about.
Your return type will be an array of Emp objects. You can use a SOAP array for that (you'll need to look that up for the syntax, since I can't remember it off the top of my head), which gets restricted to being an array of Emp.
Should the normal technique prove to be too slow then you should look at alternatives, but I would expect this to work well enough. And you have no faffing about with devising a new transfer system that then has to be explained to your client system...it'll all be standard.

Issues with Using Data Dashboard and Using Web Service

Similar Messages

Maybe you are looking for