Issues with XML Source Code

Has anyone seen or heard fo this issue:
I was sent a new xml source code and loaded it into my .rtf file. When I went to preview the file it showed up no problem. All great and dandy!
When I tried to add a field and preview the field would not show up. Yes, there is data in the XML sourse code for the tag.
I decided to run a test and load some of the old XML source code and had no problems. I was able to move fields, add plain text, and delete fields and my changes would display in the preview.
The only thing we can think of that is different is that the previous xml source code was generated from 9. 2. 08 database we recently upgraded to 10g. The new source code is from 10g.
Does this make any sense? Would our upgrade to 10g result in not being able to change the template? Or is it something else?
Thanks,
Jessica

Tim,
I actually just sent you an e-mail. It contains the rtf and the source codes.
Thanks,
Jessica

Similar Messages

Issue with Cross-Company code transactions and Extended Withholding tax

Hi Gurus,
I am having an issue with Cross-company code transaction while posting expense with 2 different company codes.
In the 2 company codes, one company code is setup for Withholding tax and other was not set.
While posting in FB50, I am getting the below message and system does not allow to post the invoice.
Company codes have different settings for withholding tax treatment
Message no. F5786
Diagnosis
You are entering a document containing at least one vendor or customer item and which has line items in several company codes. The extended withholding tax treatment has been set to active in one of these company codes, but not in one of the other company codes.
System Response
You cannot enter this kind of document.
Procedure
Enter the transaction in two documents.
For this I tried to test the transaction by activating of extended Withholding tax for both the company codes. Then the invoice is posting correctly now.
The point is if I activate extended withholding tax for the Company code which is not using the setup, will it face any issues in other areas? and also kindly advice whether is this a right way to set up to fix the current problem.
Thanks for the Support and early response will be appreciated.
JBC.

Hi Mamta,
Thanks for the Response. I think you misunderstood my scenario.
For Eg in FB60 with Co code 5065:
I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
Posting        GL                   Co Code
Dr          106520(Exp)            1000
Cr          202020(Bank)           5065
For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
Thanks,
Bapu

10g Reports issue with XML Data Source

Hi,
Has anybody ever encountered an issue with Oracle 10g report using an XML as the data source? What happens is, some of the values in the XML are printed to the wrong column.
One of the elements in our XML file is a complex type with 10 elements under it. The first 5 are picked up properly, but the last 6 are not. Elements #6 to #9 has a minimum occurence of 0. What happens is when element #6 is present, but #7 is, the value for element #7 is passed on to element #6.
The XSD and XSL files are both valid since the reports were working when we were still using 9i. There is no hidden logic in the report which might cause this issue to come up, i.e., the report just picks up the values from the XML and prints it to the appropriate columns.
Any help will be greatly appreciated.

XSD used
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
        
        <xs:element name="TradeDetail">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="TradeType"/>
                                <xs:element ref="TradeID"/>
                                <xs:element ref="TradeDate"/>
                                <xs:element ref="FundID"/>
                                <xs:element ref="FundName"/>
                                <xs:element ref="DollarValue" minOccurs="0"/>
                                <xs:element ref="UnitValue" minOccurs="0"/>
                                <xs:element ref="PercentageValue" minOccurs="0"/>
                                <xs:element ref="OriginalTradeID" minOccurs="0"/>
                                <xs:element ref="CancellationFlag"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        <xs:element name="Instruction">
                <xs:complexType>
                        <xs:sequence minOccurs="0">
                                <xs:element ref="TradeDetail" maxOccurs="unbounded"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        
        <xs:element name="InterchangeHeader">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="Instruction"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        
        <xs:element name="FundID" type="xs:string"/>
        <xs:element name="TradeType" type="xs:string"/>
        <xs:element name="TradeID" type="xs:string"/>
        <xs:element name="TradeDate" type="xs:string"/>
        <xs:element name="FundName" type="xs:string"/>
        <xs:element name="DollarValue" type="xs:decimal"/>
        <xs:element name="UnitValue" type="xs:decimal"/>
        <xs:element name="PercentageValue" type="xs:decimal"/>
        <xs:element name="OriginalTradeID" type="xs:string"/>
        <xs:element name="CancellationFlag" type="xs:string"/>
</xs:schema>
XML used
<?xml version = '1.0' encoding = 'UTF-8'?>
<InterchangeHeader xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="TradeInstruction.xsd">
   <Instruction>
      <TradeDetail>
         <TradeType>Purchase</TradeType>
         <TradeID>M000038290</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>ABN Fund</FundName>
         <DollarValue>2111.53</DollarValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>Redemption</TradeType>
         <TradeID>M000038292</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>AMRO Equity Fund</FundName>
         <UnitValue>104881.270200</UnitValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>ISPurchase</TradeType>
         <TradeID>M000038312</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>MLC0011AU</FundID>
         <FundName>Cash Fund</FundName>
         <OriginalTradeID>M000038311</OriginalTradeID>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
   </Instruction>
</InterchangeHeader>
XSLT used
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
        <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
        <xsl:template match="/">
                <InterchangeHeader>
                        <xsl:for-each select="InterchangeHeader/Instruction/TradeDetail">
                        <xsl:sort select="FundName"/>
                        <xsl:sort select="TradeDate"/>
                                <TradeDetail>
                                        <TradeType><xsl:value-of select="TradeType"/></TradeType>
                                        <TradeID><xsl:value-of select="TradeID"/></TradeID>
                                        <TradeDate><xsl:value-of select="TradeDate"/></TradeDate>
                                        <FundID><xsl:value-of select="FundID"/></FundID>
                                        <FundName><xsl:value-of select="FundName"/></FundName>
                                        <DollarValue><xsl:value-of select="DollarValue"/></DollarValue>
                                        <UnitValue><xsl:value-of select="UnitValue"/></UnitValue>
                                        <PercentageValue><xsl:value-of select="PercentageValue"/></PercentageValue>
                                        <OriginalTradeID><xsl:value-of select="OriginalTradeID"/></OriginalTradeID>
                                        <CancellationFlag><xsl:value-of select="CancellationFlag"/></CancellationFlag>
                                </TradeDetail>
                        </xsl:for-each>
                </InterchangeHeader>
        </xsl:template>
</xsl:stylesheet>

Problem file xls with jasper (source code mixed in the content XLS file)

i´m writing xls file with jasper, the problem is that is mixed the source code of the JSP (where doing request) in the content of the file xls, do not import the API thah use.
The java code whit JASPER is like:
FacesContext ctx = FacesContext.getCurrentInstance();
ExternalContext ectx = ctx.getExternalContext();
JRDataSource dataSource = ......
InputStream inputStream = ectx.getResourceAsStream(parametro);
JasperReport jasperReport = (JasperReport) JRLoader.loadObject(inputStream);
JasperPrint jasperPrint = JasperFillManager.fillReport(jasperReport,new HashMap(), dataSource);
JRXlsExporter exporter = new JRXlsExporter();
ByteArrayOutputStream xlsReport = new ByteArrayOutputStream();
exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
exporter.setParameter(JRExporterParameter.OUTPUT_STREAM, xlsReport);
exporter.exportReport();
byte[] bytes2 = xlsReport.toByteArray();
response.setContentType("application/vnd.ms-excel");
response.setContentLength(bytes2.length);
response.setHeader("Content-disposition", "attachment; filename="" + "MI_EXCEL_JR" + ".xls"");
ServletOutputStream outputStream = response.getOutputStream();
outputStream.write(bytes2, 0, bytes2.length);
outputStream.flush();
outputStream.close(); whay is printed the response in the xml file?
tnk for your help....

hoham wrote:
byte[] bytes2 = xlsReport.toByteArray();
Not related to the actual problem, but this line is not very efficient. What if the report is bigger than the available server memory? Or if there are many simultaneous requests which does all the same?
It would result in an OutOfMemoryError. Rather obtain it as an InputStream and write it in a loop to the OutputStream using a byte block as buffer. Or wrap the both streams by BufferedInputStream/BufferedOutputStream and write in a simple loop. Consult the basic Java IO tutorials for details and code examples.

Issue with data source after deploying

We are experiencing an issue with our data source after deployment of a cube. On the datasource properties in Visual Studio 2012, we have the max connections set to 0 before the deployment. Once the cube is deployed, I can navigate to the <name>.0.ds.xml
file and open it and see that the <MaxActiveConnections>0</MaxActiveConnections> is indeed set to 0. At some point over the next couple days, a process of the cube or some other action causes that value to get updated to some number too large to
be converted to an int, and makes the datasource invalid. At that point we cannot view the datasource properties in SSMS, we cannot open the cube project from Visual Studio, and we’ve even had failures when trying to process the cube. Is there a config
somewhere that would cause this value to get overwritten, or some other behind the scenes process that we can look at?
Our server information is:
Microsoft SQL Server 2012 (SP1) - 11.0.3153.0 (X64)
                Jul 22 2014 15:26:36
                Copyright (c) Microsoft Corporation
                Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
Chad Dotzenrod SWC | TECHNOLOGY PARTNERS 1420 Kensington Road, Suite 110 Oak Brook, Illinois 60523-2144 http://www.swc.com

Typically you would import the metadata from the source location and either use that location as the data source (and so not need to redeploy), or deploy it to a separate target location.
The replace action is destructive as you've found, and effectively performs a drop table followed by create table. Hence any data in the table is lost.
If you just want the Control Center Manager to correctly display that the table is deployed, try setting the action to "Upgrade". This will try to upgrade the deployed object to match the definition in OWB, but as the two are identical this will result in no changes. However, it will update the deployment records to indicate that the object is deployed.
Nigel.

J2SE adapter PI 7.1 issue with XML to flat conversion and namespace length

Dear reader,
We are facing an issue with J2SE Adapter PI7.1 for a number of flows.
The flow requirements:
[1] Namespace length for interfaces is up to 100 characters
[2] The XML message must be converted to Flat on the adapter channel
Our PI system is at patch level 7 and we implement J2SE adapter on patch level 7 as well.
We found that the J2SE adapter on patch level 7 does not support long namespaces [1] (as it should since this is an PI 7.1 j2SE adapter) but no issues where found with the XML to flat conversion [2].
Experimenting with J2SE adapter on patch level 6 we found the long namespaces [1] are supported however an issue is found with the XML to flat conversion [2] as stated in SAP note 1335527.
An SAP Customer Message is raised on this issue however your input is highly appricated!
With Kind Regards,
Harald Kastelijn
Edited by: Harald Kastelijn on Mar 6, 2010 9:17 AM
Edited by: Harald Kastelijn on Mar 6, 2010 9:19 AM

We found that the J2SE adapter on patch level 7 does not support long namespaces [1] (as it should since this is an PI 7.1
j2SE adapter) but no issues where found with the XML to flat conversion [2]
I think the restriction of namespace length still remains in design time (IR).....the same however has been extended in configuration and runtime...this SAP note has some information: https://service.sap.com/sap/support/notes/870809

Issue with XML encoding

Hi,
I am querying an SAP instance for data, and I am getting back the data in an XML document...to which I need apply XSL transformation.
The instance is an German one... so I am getting a few strange characters because of which, the parser is uanble to apply the transformation.
I wrote a small java program to get more info on this particular character causing the problem, it turns out to be an ISOControl character. The properties (got by using the Character class API) are as below.
1. Character 1:
The getDirectionality is:0
The getNumericValue is:21
The getType is:2
The isDefined is:true
The isISOControl is:false
The isMirrored is:false
The isSpaceChar is:false
The isUnicodeIdentifierPart is:true
The isUnicodeIdentifierStart is:true
The isWhitespace is:false
2. character 2:
The getDirectionality is:9
The getNumericValue is:-1
The getType is:15
The isDefined is:true
The isISOControl is:true
The isMirrored is:false
The isSpaceChar is:false
The isUnicodeIdentifierPart is:true
The isUnicodeIdentifierStart is:false
The isWhitespace is:false
These characters appear to be white space in normal text editors...
This is how I am applying the transformation
TransformerFactory tFactory = TransformerFactory.newInstance();
Transformer transformer =
tFactory.newTransformer(
new javax.xml.transform.stream.StreamSource
(XSLURI)
StringReader sr = new StringReader(xmlToApply);
StringWriter sw = new StringWriter();
transformer.transform(
new javax.xml.transform.stream.StreamSource(sr),
new javax.xml.transform.stream.StreamResult(sw)
return sw.toString();
I have tried to use "UTF-8", "ISO-8859-1" and other encodings, but in vain. Appreciate any pointers on this...

Also the postings are from 2 different perspectives... this is to address the issue that I am facing with XML parsing and how to eliminate that using XML apis...
My other posting about a possible work around (encoding) for the problem creating string...

Issue with XML bursting program

Hi All,
We have a Oracle concurrent program which generates PDF output using XML data and RTF template. This output is sent as attachment to a designated user using XML bursting.
The issue that we are facing is, the mail is sent to the recipients correctly when the program is run from my login. But when the same is run from anyone else’s login, the bursting program fails.
Suppose the receiver’s email id is [email protected], the error faced is
[oracle.apps.xdo.batch.DeliveryHelper][EXCEPTION] javax.mail.internet.AddressException: Illegal character in domain in string ``[email protected]@xyz.com''
On examining the XML bursting program log file for successful and error runs, I could see the below property in the log file-
For successful run: [SMTP_TO_RECIPIENTS:String] [[email protected]]
Whereas for unsuccessful run: [SMTP_TO_RECIPIENTS:String] [[email protected]@xyz.com]
Any pointers in this regard are highly appreciated.
Regards,
Kiranmayi.

Thanks for your quick response.
I believe the HP printer is an old one and I did have a couple of issues with it while using XML Publisher.However we've overcome those issues.
We have installed xpdf and have been using the pdf2ps utility.We have PASTA set up and printing works fine when Bursting is not used.
Is there some change I have to make to the configuration file/Bursting Control file to be able to use this pdf2ps utility to print to this Printer?
Nevertheless I will also try using ipp on one of our newer printers...
Thanks,
Lavina

Issue with XML report printing on R12 instance

Hi,
I'm facing issue with printing xml reports on R12 instance and followed the note (How To Print XML Publisher PDF Reports Via The Concurrent Manager:metalink id:338990.1) and configured the pasta printer,still printer output is showing the junk charcters.
Please let me know how to resolve the issue?.

Hi Hussien,
We are on 12.1.1 / 11g with AL32UTF8 character set, we have custom reports developed in BI publisher and some some migrated reported from earlier version.
Both BI publisher based custom like PO/Invoice/Cheque Print & seeded reports like "Active users/responsibilites" are being generated successfuly in pdf output. when copied to desktop and printed it prints properly. But when trying to direct output to printer from concurrent request it is printng junk.
I checked pasta configuration, all required ghostscripts tools are on the AIX box, am I missing anything in R12?
Regards

White space in XML source code

Ok, I have tried all of the tricks to prevent white space in the code. The page displays fine, but there are 4 lines at the top of the source code making the file not vaild. Ideas? Thanks in advance.

You can use the reset attribute of CFCONTENT to clear any output, such as whitespace, that occurs before the CFCONTENT tag. See quick sample below. If this doesn't work for you can you post your code?
<cfsavecontent variable="sampleXml"><?xml version="1.0"?> 
    <people>
        <name>Jon Smith</name>
        <name>Rose Tyler</name>
    </people>
</cfsavecontent>

<cfcontent type="text/xml" reset="yes" /><cfoutput>#sampleXml#</cfoutput>

How To Upload Object Dependency with Long Source Code

Hi Everyone,
I use LSMW (IDoc:KNOMAS) to upload the Object Dependency with T-Code CU01. However I can not upload the formula/source code within more than 72 characters due to the maximum size of the source code field in dependency editor is 72 characters.
Is there anyone that have the same problem and know the solution? Or is there any advice / tips how to upload the Object Dependency that have long source code?
Any comments is appreciated. Thank you before hand.

Hi Mika Permana,
Same Problem am also getting when i was trying to upload more than one object dependency syntax's on CU01,
After that i came to know we can restrict that all those things before 72 character's and we can add all those things to the next line in notepad,
For Example,
Header 1
$SELF.Z_PRICE_HDC= 'HDC30' IF TURNAROUND = 'TAT5' AND NDF_COLOR1 = '4/4'
AND NDF_COLOR1 = '4/4'
Here We cant upload the object dependencies through to excel file,because KCD_EXCEL_OLE_TO_INT_CONVERT and ALSMEX_TABLINE function module having 'Value' field ,its length is 50 only,
so it cant allow after 50th word. so i preferred to use notepad!!!
the following code is for your reference.
LOOP AT i_index WHERE knnam_001 = it_mmtab-knnam_001.
       l_count = l_count + 1.
       CONCATENATE 'RSTXP-TDLINE(' l_count ')' INTO var1.
       PERFORM bdc_field       USING var1                               " 'RSTXP-TDLINE(01)'           " syntax
                                i_index-tdline_01_006.
       IF l_count > 15.
         MESSAGE 'LINE ITEM EXCEEDED > 15 ' TYPE 'E'.
       ENDIF.
     ENDLOOP.
Thanks & Regards,BASTIN VINOTH NGSAP Technical Consultant, Unisoft Infotech Pvt. Ltd.,

E-Commerce for mySAP ERP: Problem with java source code

Hello everybody,
we try to implement web shops on the basis of ECO for ERP 5.0. The shop is running fine and we want to start with some extensions in java classes and web UI with NWDI 2004s.
We created a new track and our own application as described in "Development And Extension Guide". We need to extend some of the original java classes for the b2b scenario and of course the user interface.
We got the information from SAP, that the original java classes are not intended
to be modified by customers and therefore it is not intended to create a project with NWDI that contains that source code. But we should be able to create own DCs and copy the source code into it and then modify them on own risk.
We tried to do that, but always got errors.
Due to customer requirements we have to make some modifications otherwise we can not use this solution.
If there is anybody who has already some experience with this topic we
would be very glad to get some hints.
Kind Regards
Helmut

Hello Raju,
I am sorry, but I am no technical consultant, but I am have to change
the already installed application for our customers.
Nethertheless I try to give you some information I have. I had a look at SAP note 883948 you mentioned. The software components which are listed under XECO are the software components which contain the E-Commerce Application. You also find them in the "Development and Extension Guide".
There are some guides under http://service.sap.com/instguides -> mySAP Business Suite Solutions -> mySAP ERP -> mySAP ERP 2005 -> Installation. In the document "SAP E-Commerce for mySAP ERP: Business Scenario Configuration Guide" there is a table of the needed components on a high level.
From the view of the application you need the E-Commerce application itself, the TREX for searching in the product catalog, the IPC if you want to have price calculation in the shop or configuration of products with optional components.
Hope this helps a bit
Kind Regards
Helmut

Oracle XML source code

Does Oracle plan to make the XML parser source code available to
developers any time in the (near!!) future?
Donald Wheeler
null

That was our intention, but as yet we have not cleared all of
the legal hurdles and have no anticipated date to announce.
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
Donald Wheeler (guest) wrote:
: Does Oracle plan to make the XML parser source code available
to
: developers any time in the (near!!) future?
: Donald Wheeler
null

Latest Update of Adobe Media Encoder Issue with C4D Source

Updated Media Encoder to Build 8.0.0.173 this AM when the Adobe notification came through and it now refuses to encode any project with C4D source. The issue is codec agnostic. Tried with both C4D R15 and R16. No joy. Any clue? Would like to roll back to the previous version but not sure that option is available within the uber-slick CC Adobe world.

I'm confused. You say that you updated ths morning, but then you give the version number for the previous version (8.0), rather than the current version for AME (8.1).
I just tried rendering and exporting an After Effects composition containing a .c4d scene file through AME 8.1, and it works fine for me on Windows and Mac OS.

Sapscript - print a list with all source code of the windows in layout

hi all,
i need a way to print all source code of the layout (include the source of all windows in the layout).
thanks,
dany

Hi Dany
From SE71, you can go to FORM INFO: Utilities->Form Info
Max

Issues with XML Source Code

Similar Messages

Maybe you are looking for