10g Reports issue with XML Data Source

Hi,
Has anybody ever encountered an issue with Oracle 10g report using an XML as the data source? What happens is, some of the values in the XML are printed to the wrong column.
One of the elements in our XML file is a complex type with 10 elements under it. The first 5 are picked up properly, but the last 6 are not. Elements #6 to #9 has a minimum occurence of 0. What happens is when element #6 is present, but #7 is, the value for element #7 is passed on to element #6.
The XSD and XSL files are both valid since the reports were working when we were still using 9i. There is no hidden logic in the report which might cause this issue to come up, i.e., the report just picks up the values from the XML and prints it to the appropriate columns.
Any help will be greatly appreciated.

XSD used
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
        <!-- trade instructions detail & trailer -->
        <xs:element name="TradeDetail">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="TradeType"/>
                                <xs:element ref="TradeID"/>
                                <xs:element ref="TradeDate"/>
                                <xs:element ref="FundID"/>
                                <xs:element ref="FundName"/>
                                <xs:element ref="DollarValue" minOccurs="0"/>
                                <xs:element ref="UnitValue" minOccurs="0"/>
                                <xs:element ref="PercentageValue" minOccurs="0"/>
                                <xs:element ref="OriginalTradeID" minOccurs="0"/>
                                <xs:element ref="CancellationFlag"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        <xs:element name="Instruction">
                <xs:complexType>
                        <xs:sequence minOccurs="0">
                                <xs:element ref="TradeDetail" maxOccurs="unbounded"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        <!-- overall trade instruction message -->
        <xs:element name="InterchangeHeader">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="Instruction"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        <!-- definition of simple elements -->
        <xs:element name="FundID" type="xs:string"/>
        <xs:element name="TradeType" type="xs:string"/>
        <xs:element name="TradeID" type="xs:string"/>
        <xs:element name="TradeDate" type="xs:string"/>
        <xs:element name="FundName" type="xs:string"/>
        <xs:element name="DollarValue" type="xs:decimal"/>
        <xs:element name="UnitValue" type="xs:decimal"/>
        <xs:element name="PercentageValue" type="xs:decimal"/>
        <xs:element name="OriginalTradeID" type="xs:string"/>
        <xs:element name="CancellationFlag" type="xs:string"/>
</xs:schema>
XML used
<?xml version = '1.0' encoding = 'UTF-8'?>
<InterchangeHeader xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="TradeInstruction.xsd">
   <Instruction>
      <TradeDetail>
         <TradeType>Purchase</TradeType>
         <TradeID>M000038290</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>ABN Fund</FundName>
         <DollarValue>2111.53</DollarValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>Redemption</TradeType>
         <TradeID>M000038292</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>AMRO Equity Fund</FundName>
         <UnitValue>104881.270200</UnitValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>ISPurchase</TradeType>
         <TradeID>M000038312</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>MLC0011AU</FundID>
         <FundName>Cash Fund</FundName>
         <OriginalTradeID>M000038311</OriginalTradeID>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
   </Instruction>
</InterchangeHeader>
XSLT used
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
        <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
        <xsl:template match="/">
                <InterchangeHeader>
                        <xsl:for-each select="InterchangeHeader/Instruction/TradeDetail">
                        <xsl:sort select="FundName"/>
                        <xsl:sort select="TradeDate"/>
                                <TradeDetail>
                                        <TradeType><xsl:value-of select="TradeType"/></TradeType>
                                        <TradeID><xsl:value-of select="TradeID"/></TradeID>
                                        <TradeDate><xsl:value-of select="TradeDate"/></TradeDate>
                                        <FundID><xsl:value-of select="FundID"/></FundID>
                                        <FundName><xsl:value-of select="FundName"/></FundName>
                                        <DollarValue><xsl:value-of select="DollarValue"/></DollarValue>
                                        <UnitValue><xsl:value-of select="UnitValue"/></UnitValue>
                                        <PercentageValue><xsl:value-of select="PercentageValue"/></PercentageValue>
                                        <OriginalTradeID><xsl:value-of select="OriginalTradeID"/></OriginalTradeID>
                                        <CancellationFlag><xsl:value-of select="CancellationFlag"/></CancellationFlag>
                                </TradeDetail>
                        </xsl:for-each>
                </InterchangeHeader>
        </xsl:template>
</xsl:stylesheet>

Similar Messages

  • Problem using JRC 2.0 on Unix with xml data source

    Hello,
    I am experimenting difficulties using the JRC 2.0 (which I hadn't with the previous version) on a RedHat 4 machine. It takes 7 minutes (only 20 seconds on Windows) to create a pdf (1 page) from a simple report using an xml file as data source.
    It takes approximately 2 minutes when opening the report
          > reportClientDoc.open(REPORT_NAME, 0);
    then 4 minutes are required to connect the report to the xml data source
          > reportClientDoc.getDatabaseController().setDataSource(xml_ds, "", "");
    Have you got any clue on possible reasons for this issue ?
    Edited by: florian epiard on Jan 30, 2009 4:33 PM

    Hello,
    I am experimenting difficulties using the JRC 2.0 (which I hadn't with the previous version) on a RedHat 4 machine. It takes 7 minutes (only 20 seconds on Windows) to create a pdf (1 page) from a simple report using an xml file as data source.
    It takes approximately 2 minutes when opening the report
          > reportClientDoc.open(REPORT_NAME, 0);
    then 4 minutes are required to connect the report to the xml data source
          > reportClientDoc.getDatabaseController().setDataSource(xml_ds, "", "");
    Have you got any clue on possible reasons for this issue ?
    Edited by: florian epiard on Jan 30, 2009 4:33 PM

  • XmlDataProvider .... is gone completely in my Xaml file. Why? How many different ways to deal with xml data source through WPF

    I followed a procedure described in a book.
    1. insert "Inventory.xml" file to a project "WpfXmlDataBinding" .
    2. add the XML data source through the data panel of "blend for 2013", named it "InventoryXmlDataStore" and store it in the current document.
    3. dragged and droppped the nodes from the Data panel onto the artboard.
    Then I checked my Xaml file against the one provided by the book
    Xaml file by the book:
    <Window.Resources>
    <!-- This part is missing in my xaml file --><XmlDataProvider x:Key="InventoryDataSource"
    Source="\Inventory.xml"
    d:IsDataSource="True"/>
    <!-- This part is missing in my xaml file -->
    <DataTemplate x:Key="ProductTemplate">
    <StackPanel>
    <TextBlock Text="{Binding XPath=@ProductID}"/>
    <TextBlock Text="{Binding XPath=Cost}"/>
    <TextBlock Text="{Binding XPath=Description}"/>
    <CheckBox IsChecked="{Binding XPath=HotItem}"/>
    <TextBlock Text="{Binding XPath=Name}"/>
    </StackPanel>
    </DataTemplate>
    </Window.Resources>
    <Grid>
    <ListBox HorizontalAlignment="Left"
    ItemTemplate="{DynamicResource ProductTemplate}"
    ItemsSource="{Binding XPath=/Inventory/Product}"
    Margin="89,65,0,77" Width="200"/>
    </Grid>
    my Xaml file:
    <Window x:Class="WpfXmlDataBinding.MainWindow"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    Title="MainWindow" Height="922" Width="874">
    <Window.Resources>
    <DataTemplate x:Key="ProductTemplate">
    <StackPanel>
    <TextBlock Text="{Binding XPath=@ProductID}"/>
    <TextBlock Text="{Binding XPath=Cost}"/>
    <TextBlock Text="{Binding XPath=Description}"/>
    <CheckBox IsChecked="{Binding XPath=HotItem}"/>
    <TextBlock Text="{Binding XPath=Name}"/>
    </StackPanel>
    </DataTemplate>
    </Window.Resources>
    <Grid DataContext="{Binding Source={StaticResource InventoryXmlDataStore}}">
    <ListBox HorizontalAlignment="Left" Height="370"
    ItemTemplate="{DynamicResource ProductTemplate}"
    ItemsSource="{Binding XPath=/Inventory/Product}"
    Margin="65,55,0,0" VerticalAlignment="Top" Width="270"/>     
        </Grid>
    </Window>
    All looks quite the same except the <XmlDataProvider ....> part under <Window.Resources>, which is gone completely in my Xaml file.
    1, Why?
    2, How many different ways to deal with xml data source through WPF?
    Thanks, guys.
    (ps My "WpfXmlDataBinding" runs without problem through.)

    Never do yourself down Richard.
    Leave that to other people.
    It's quite common for smart developers to think they're not as good as they are.
    I coach a fair bit and it's a surprisingly common feeling.
    And to repeat.
    Never use anything ends .. provider.  They're for trivial demo apps.  Transform xml into objects and use them.  Write it back as xml.  Preferably, use a database.
    You want to read a little mvvm theory first.
    http://en.wikipedia.org/wiki/Model_View_ViewModel
    Whatever you do, don't read Josh Smiths explanation.  I used to recommend it but it confuses the heck out newbies. Leave that until later.
    Laurent Bugnion did a great presentation at mix10.  Unfortunately that doesn't seem to be working on the MS site, but I have a copy.  Download and watch:
    http://1drv.ms/1IYxl3z
    I'm writing an article at the moment which is aimed at beginners.
    http://social.technet.microsoft.com/wiki/contents/articles/30564.wpf-uneventful-mvvm.aspx
    The sample is just a collection of techniques really.
    I have a sample which involves no real data but is intended to illustrate some aspects of how viewmodels "do stuff" and how you use datatemplates to generate UI.
    I can't remember if I recommended it previously to you:
    https://gallery.technet.microsoft.com/WPF-Dialler-simulator-d782db17
    And I have working samples which are aimed at illustrating line of business architecture.  This is an incomplete step by step series but I  think more than enough to chew on once you've done the previous stuff.
    http://social.technet.microsoft.com/wiki/contents/articles/28209.wpf-entity-framework-mvvm-walk-through-1.aspx
    The write up for step2 is work in progress.
    https://gallery.technet.microsoft.com/WPF-Entity-Framework-MVVM-78cdc204
    Hope that helps.
    Recent Technet articles: Property List Editing;
    Dynamic XAML

  • Issue with 2LIS_02_SCL Data source

    Hi Everybody,
    I am facing the below 2 issues with 2lis_02_scl data source,
    1) This is fetching only the records  ETENR (Delivery Schedule Line Counter) value with ' 1 ', It is ignoring others ex:2,3 and 4. Hence Data is not reconciling with ECC system.
    2) The standard field GLMNG is not getting any data, Data was existed in table(EKET) level. So i have written the code and data is coming now. But the problem is, This is not considering the ROCANCEL indicator it seems. All the other key figures values are coming in with Negative sign When ROCANCEL Value is ' X ' or ' R ', But this field is getting all the positive values irrespective of ROCANCEL indicator. Hence showing the incorrect values compared to the ECC.
    Can anybody help me on this,
    Regards,
    Gopinath

    Hi Gopinath:
       Have you already applied any SAP Note to solve this problem?
    Please check if the SAP Note below is applicable to your system.
    668177 - "LIS BW: wrong quantity for documents with invoice plan"
    Regards,
    Francisco Milán.

  • Problem in filling jasper report with XML Data source

    Hello!
    I am trying to build a report uxing xml data source..Please verify following code:
    String outFileName = "c:/Report1.pdf";
    File xmlFileName = new File("C:/Program Files/JasperSoft/iReport-1.2.5/report.jrxml");
    String recordPath = "/SiteDetails/Site";
    JasperDesign jasperDesign = JRXmlLoader.load(xmlFileName);
    JasperReport jasperReport = JasperCompileManager.compileReport(jasperDesign);
    JRXmlDataSource jrxmlds = new JRXmlDataSource(new File("c:/NewSite.xml"),recordPath);
    HashMap hm = new HashMap();
    try
    JasperPrint print = JasperFillManager.fillReport(jasperReport,hm,jrxmlds);
    JRExporter exporter = new net.sf.jasperreports.engine.export.JRPdfExporter();
    exporter.setParameter(JRExporterParameter.OUTPUT_FILE_NAME,outFileName);
    exporter.setParameter(JRExporterParameter.JASPER_PRINT,print);
    exporter.exportReport();
    catch (JRException jre)
    jre.printStackTrace();
    catch (Exception e)
    e.printStackTrace();
    My Xml file is:
    <?xml version="1.0" encoding="UTF-8"?>
    <SiteDetails>
    <Site>
    <Name>Site1</Name>
    <Addr>Bangalore</Addr>
    <supersiteid>null</supersiteid>
    </Site>
    <Site>
    <Name> Site2</Name>
    <Addr> Madras</Addr>
    <supersiteid>Site1</supersiteid>
    </Site>
    </SiteDetails>
    I want to display details of Siteand Address..My program works fine but displays only 1 (first) record...What should i do to display the full file..do i need to navigate thru the file and give that as an input to fillReport ()method...

    Hi,
    Have a look at below URL.
    http://ireport.sourceforge.net/cap7.html#7.4
    Regards
    VInK

  • CollapsiblePanel with XML data source

    I've been working with the CollapsiblePanel for the past two
    nights. I can't make the panel collapse at runtime when I have XML
    data attached.
    I validated by downloading one of the Adobe Lab
    CollapsiblePanel samples. I validated that I could make the sample
    work from my Dreamweaver CS3 environment. Then, I added an XML data
    source and retested. The panel would not collapse. Then, I took out
    the XML dataset and retested the CollapsiblePanel. It worked.
    Is this a design feature? I can't imagine this was designed
    to work this way. I'm trying to create a scrollable div that can
    collapse. I have everything working except the collapse feature.
    (BTW: I tried defining a spry:region and spry:detailregion, it
    didn't seem to matter.)
    CODE SNIPIT
    <div id="CollapsiblePanel1" class="CollapsiblePanel"
    spry:region="dsWeek">
    <div class="CollapsiblePanelTab">Standard Collapsible
    Panel</div>
    <div class="CollapsiblePanelContent">
    <p>{feature}</p>
    </div>
    </div>

    How does the xml data look like? in GML?
    If the xml data set is not too large, maybe you can add them (after your application has parsed them) as additional MapViewer GeoFeatures in a map request.
    Currently MapViewer (preview or production release of 9.0.4) does not support xml-only datasource.
    We will look into incorporating GML or other standard-based xml datasource for a future release of MapViewer.

  • MapViewer with XML data source

    Hello all,
    We have the MapViewer read data from JDBC data source doing spatial queries. Can any one tell me if I can use XML data source as input to the MapViewer.
    We have a data source that is only available thru Web services, we cannot make a database view on the schema.
    If not is it planned in the production version.
    Thanks

    How does the xml data look like? in GML?
    If the xml data set is not too large, maybe you can add them (after your application has parsed them) as additional MapViewer GeoFeatures in a map request.
    Currently MapViewer (preview or production release of 9.0.4) does not support xml-only datasource.
    We will look into incorporating GML or other standard-based xml datasource for a future release of MapViewer.

  • Crystal Reports XI R2 SP 6 - Issue with setting Data Source Location

    Hello,
      After some initial difficulty instally CR XI R2 with SP 6 on a windows XP machine (see thread Error on installation of CR XI R2 SP6), the Crystal Reports environment seemed fine, however, when I tried resetting the datasource location on an ODBC datasource between a development and production server, I get the message 'Some Tables could not be replaced as no match was found....'   The tables in the two databases are identical so that isn't the issue.
    Here is some additional information
    The issue seems related only to DSN's that point to a progress database.  I am able to reset datasource locations for DSN's that use the SQL server driver and also for those that use the XML CR ODBC XML Driver 5.0.  I am not able to reset the datasource locations on the DSN's that use a Progress Open Edge 10.1 DB  driver.
    I can create a new report using the DSN for the Progress Driver and add tables, but the table names are coming up as an alias - i.e. if I add a table called PM_Plant, the table added to the report is PM_Plant1.
    I also found I can go into existing reports, rename the tables in the database expert to be an alias (appending 1 to the end of the table name), then I am able to repoint them using the datasource location screen. 
    So it looks like there is a potential work around to the situation, but I didn't run across any information that we should need to do that. 
    Any recommendations how to fix the issue?  
    Thanks,

    Hi Don,
    The reports were created with CR XI R1 on my PC  initially and the progress drivers have not changed since.   The reports were deployed to a server and I pulled them back to my PC to test out any changes after the CR XI R2 SP 6 upgrade.  (so there is really only one machine involved, the one that had the upgrade). 
    I did look at the settings for verifying and tried playing around with those and also with verifying the database but that didn't make any difference.
    I wasn't quite sure which registry keys to look at or what the values should be so wasn't able to pursue that option. 
    All the tables in the progress database use underscores as part of the table name (i.e. PM_Plant, PM_Company), do you think the upgrade to SP6 means that the underscore is now a reserved character and that is why the tables are getting aliased?  If so, do you know how to change the alias settings or the list of characters that are reserved?
    Just an FYI, I had to downgrade back to CR XI R1 at this point to get work done.   If time allows, I'll retry the upgrade in about 5-7 weeks.  I discussed the issue with a system admininstrator and we willl try removing the progress drivers and DSN's prior to trying an upgrade again to see if that makes a difference.  I'll also make sure to keep track of all Report Options and Options and also registry keys to see what changes.
    Thanks

  • Jasper Report with XML data Source problem

    I have a problem in getting a report run on my machine..
    I have a report that uses XML-dataSource to read info stored in xml file, I use XPath query to traverse xml nodes,
    I have JBoss Server installed but the problem is that I want to know how to configure JBoss and tell it where to look for the xml file so the report can produce right information.
    I use Windows XP and JBoss 4.23 and I finished the report using i-report 2.0.2
    please I need the configuration steps to make this report work... thanx in advance

    Hi,
    Have a look at below URL.
    http://ireport.sourceforge.net/cap7.html#7.4
    Regards
    VInK

  • Performance issue with Oracle data source

    Hi all,
    I've a rather strange problem that I'm stuck on need some assistance on.
    I have a rules file which drags data in via an SQL data source thats an Oracle server. If I cut/paste the 3 sections of "select" "from" and "where" into SQL-Developer and run the query, it takes less than 1 second to complete. When I run the "load data" with this rule file or even use the "Retrieve" with the rules file edit, it takes up to an hour to complete/retrieve the data.
    The table in question being used has millions of rows and I'm using one of the indexed fields to retrieve the data. It's as if the Essbase/Rule file is ognoring the index, or I have a config issue with the ODBC settings on the server that is causing the problem.
    ODBC.INI file entry for the Oracle server as follows (changed any sensitive info to xxx or 999).
    [XXX]
    Driver=/opt/data01/hyperion/common/ODBC-64/Merant/5.2/lib/ARora22.so
    Description=DataDirect 5.2 Oracle Wire Protocol
    AlternateServers=
    ApplicationUsingThreads=1
    ArraySize=60000
    CachedCursorLimit=32
    CachedDescLimit=0
    CatalogIncludesSynonyms=1
    CatalogOptions=0
    ConnectionRetryCount=0
    ConnectionRetryDelay=3
    DefaultLongDataBuffLen=1024
    DescribeAtPrepare=0
    EnableDescribeParam=0
    EnableNcharSupport=0
    EnableScrollableCursors=1
    EnableStaticCursorsForLongData=0
    EnableTimestampWithTimeZone=0
    HostName=999.999.999.999
    LoadBalancing=0
    LocalTimeZoneOffset=
    LockTimeOut=-1
    LogonID=xxx
    Password=xxx
    PortNumber=1521
    ProcedureRetResults=0
    ReportCodePageConversionErrors=0
    ServiceType=0
    ServiceName=xxx
    SID=
    TimeEscapeMapping=0
    UseCurrentSchema=1
    Can anyone please advise on this lack of performance.
    Thanks in advance
    Bagpuss

    One other thing that I've seen is that if your Oracle data source and Essbase server are in different geographic locations, you can get some delay when it retrieves data over the WAN. I guess there is some handshaking going on when passing the data from Oracle to Essbase (either by record or groups of records) that is slowed WAY down over the WAN.
    Our solution to this was remove teh query out of the load rule, run it via SQL+ on a command line at the geographic location where the Oracle database is, then ftp the resulting file to where the Essbase server is.
    With upwards of 6 million records being retrieved, it took around 4 hours in the load rule, but running the query via command line took 10 minutes, then the ftp took less than 5.

  • Data load issue with export data source - BW 3.5

    Hi,
    We are facing issues in loading data with the help of export data source.
    We have created export data source of 0PCA_C01 cube. With the help of this export datasource,  we are loading data to other custom cube. Scenario is working fine in development server.
    But when we transported objects to quality server data is not getting loaded to custom target cube.
    It is extracting zero records.  All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs.  Every object is active but data is not getting extracted.
    RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development.   We are in BW 3.5 with patch level 19.
    Please guide us to resolve the issue.
    Thanks,
    Aditya

    Hi
    Make sure that you have relevant Role & Authorization at Quality/PRS.
    You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
    Hope it helps and clear

  • Issue with Treasury Data Source - 0CFM_DELTA_POSITIONS

    Hi all,
    I'm trying to use data sources 0CFM_INIT_POSITIONS & 0CFM_DELTA_POSITIONS to load treasury data.
    Through INIT data source the data has been initialized and loaded the history data to BW from R/3. I'm able to see the entry in time stamp table for the INIT data source. Also the initialization has been done for DELTA_POSITIONS. But I couldn't see any entry in time stamp tabe, whereas queue has been created in RSA7.
    After that we made few transactions in R/3 and trying to take those data through DELTA_POSITIONS. I checked in RSA3, system fetches more than 5000 records (which was not made after initialization) and beyond that it gives dump saying termination point has been set in the program.
    Can some one please explain me the logic on which these data source works? Any other setting needs to be done?
    With regards,
    Muthu.

    Hi Pooja,
    1) It might be Database table space issue in the backround, Please checkit out with BASIS
    Regards,
    Marasa.

  • Report Model with mulitple data sources

    Hi,
    We have requirement to develop report model in 2008 having multiple data sources which includes SQL SERVER 2012 and Oracle database so end user can all the relevant data in one place to run in report builder. So please advise how this can be achieved.
    One option I can think of pulling all the data into one database through SSIS and then build a smdl on it.
    I heard it might be possible to build Tabular cube and then use Report builder on it not sure which is the best option unless any other solution.
    Thanks,

    You can use SSIS to collect data from multiple sources (SQL Server, Oracle, etc.) and store it in SQL Server database. Then you can use SSAS to build a cube on that database. With SSRS/reportbuilder you can create reports on the cube or on the database...
    Please mark the post as answered if it answers your question | My SSIS Blog:
    http://microsoft-ssis.blogspot.com |
    Twitter

  • Master data load issue with flexible data source

    Hi All,
    1CL_OLIS001have this data source for loading configuration data. the changed records are not updating into this DS regularly.
    I have delta load on this every day. It loads correct data for one month and suddently it will start loading 0 records every day with out failing. If I reset the delta, it will work fine for month or two and then will corrupt again.
    Is any one have this kind of issue before Please suggest to resolve this issue permanently?
    Thanks and Regards,
    Pooja

    Hi Pooja,
    1) It might be Database table space issue in the backround, Please checkit out with BASIS
    Regards,
    Marasa.

  • Create offline interactive forms using webdynpro java with XML data source

    Hi Gurus,
    I am having a scenario like below:
    Sales guy request for order list online from portal- Sytem receives the request and creat XML file- from xml file need to create a Offline interactive form-Sales guy fills it offline at customer site- uploads in portal -on submit xml has to be generated with captured data at customer site-Process to  ECC.
    So my questions are:
    How to create the offline interactive form  from XML?
    Once filled offline interactive form uploaded into portal how to create XML again from pdf ?
    Please give some idea on this as this is my first Offline interactive form using XML datasource.
    Thanks
    Ravi
    Edited by: Ravi Sunkara on Jul 27, 2010 5:25 PM

    Hi Otto,
    Sorry for replying lately. First of all  I did not get your suggestions as your are editing the same posting.
    Secondly we will be using WDJ. Actually in between SAP Portal and ECC we are having adobe LCES so we need to create Interactive form using XML only. Once it is filled again the form will be submitted to another application which is running on FLEX, which will process the order.
    if you can give me your personal id i can send you the detailed process
    Thanks
    Ravi

Maybe you are looking for