IT 15: How to find out different cost assignment specifications

Hello,
in the infotype 0015 (Additional Payments) it's possible to to define different cost assignment specifications (for example a different cost center than defined in IT0001). I already found out, that you can select those datasets with a special cost assignment specification by filtering the flag on the field PA0015-REFEX.
What I didn't find out is, where I can select the cost center (or in general: the CO object), that was defined for that dataset? Is there a special table?
Thanks for your help.
Regards, Lulzim

Hi Lulzim,
The cost assignments are stored in ASSHR / ASSOB and PDSNR tables..
Get PDSNR key from ASSHR table (Infotype 15) .. get details from ASSOB and PDSNR table
Please kindly close the thread by allocating points if this resolves your issue..
-Bharat

Similar Messages

How to find out the cost of SAP user for a particular user id

Dear All,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
Raghu

Hello Raghu,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
I think you need to reach out to BASIS consultant to check out the Cost involved for User ID for the SAP application.
Regards,
Sarthak

How to find out the amount assigned to WBS element

Hello Friends,
Will you please inform how to find out the (amount/value/budget) assigned
to WBS element
Which Table it is stored in?
Thanks in Advance
Bset Regards
Diwakar

Hi Diwakarnd,
You can use any of the following reports to get the information you require.
1. S_ALR_87013557 - Budget/Actual/Variance
2. S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned
3. S_ALR_87013559 - Budget/Distributed/Plan/Distributed
Some of these reports use a complex selection criteria from various tables which has been grouped together, logically by SAP. The Logical Database table name for PS is PSJ.
Execute transaction code SE36 -> PSJ -> (Subobject : Radio button Structure) -> Click on Display.
You would see all the underlining tables used.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

How to find out the users assigned tasks within a GP process using GP API?

All,
I am trying to get details of all the running GP processes. As a part of this, I need to get the user information of who is assigned a task within a process.
Any inputs on this ?
Do I have to use the IGPProcessRoleInstance interface? Also how do I get the execution context of all the callable objects within the process?
-Thanks in advance
KN

Hi Chandan,
I am basically looking for the roles responsible for each task in the process.
I get the below exception when I execute the code provided by you.
com.sap.caf.eu.gp.exception.api.GPEngineException: No active version of the given development object existscom.sap.caf.eu.gp.exception.api.GPEngineException: No active version of the given development object exists at com.sap.caf.eu.gp.exception.impl.ExceptionUtil.convertTo(ExceptionUtil.java:36) at com.sap.caf.eu.gp.process.impl.GPProcess.getActiveTemplate(GPProcess.java:116) at com.sap.caf.eu.gp.process.dt.impl.GPDesigntimeManager.getActiveTemplate(GPDesigntimeManager.java:276) at com.sap.caf.eu.gp.process.dt.impl.GPDesigntimeManager.getActiveTemplate(GPDesigntimeManager.java:269) at com.bp.cmd.wd.GPReporting.getOverdueProcesses(GPReporting.java:346) at com.bp.cmd.wd.wdp.InternalGPReporting.getOverdueProcesses(InternalGPReporting.java:184) at com.bp.cmd.wd.GPReportingView.onActionSubmit(GPReportingView.java:145) at com.bp.cmd.wd.wdp.InternalGPReportingView.wdInvokeEventHandler(InternalGPReportingView.java:169) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:746) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:699) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:255) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
I guess this is because there is no active version of the process available now. Any inputs on this and how to avoid this ?
-Thanks,
KN.

How to find out Plant wise Cost centre/ Profit Centre

Hi Guru
My problem is How to find out plant wise cost centre. To be more clear------ I want to know what cost centre is valid for a particular plant
My mail Id. [email protected]

Hi,
Then this explains the problem.
The message number starts with a Z and so it is not a standard SAP message because SAP does not link cost centres or GLs to Plants
But also, the message doesn't indicate a problem with the link? it is stating that you should check that the GL account and the PROFIT CENTRE are valid for the posting for the period???.
It looks like someone has written a custom modification in your system and so we are , unfortunately, unable to help because the data would be in custom tables and not standard SAP tables.
You can only solve this problem by speaking to someone within your own company who knows the mdofication that has been done.
Sorry
Steve B

HOW TO FIND OUT VA TARGET IN MATERIAL COSTING

Hi experts,
    how to find out va target in material costing. I got a field from keph-kts004 but i cant able to find out how it is calculated.
Whenever costing using ck11n for one material va target coming correct value but using ck40n for multiple material va target coming incoorect . it is taking previous material va target value .
   Please help on this one and u can get reward points,
Thanks,
venky

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

How to find out structure of internal table?

Hi
is there any way how to find out name of structure upon which internal
table was created?
i got internal table passed to function module by any table
type. There can be different types of table passed in. Inside of
module a need to find out the structure of table.
I've found a tricky way how to find this information using following
command 'DESCRIBE FIELD dobj INTO td.', but its probably not a correct
way because using this command is not recommended in application
programs.
Is there any function module, or something i can use for getting this information?
Thanks

Thanks very much
This has solved my problem:
DATA descr_ref TYPE ref to cl_abap_typedescr.
DATA tabname TYPE string.
descr_ref = cl_abap_typedescr=>describe_by_data( itab ).
tabname = descr_ref->absolute_name.

How to find out which keywords were used to create a smart album?

Hi,
I actually have 2 questions;
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Thanks guys,
Raphael
<Edited by Host>

b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Raphael,
that message may occur for four reasons at least:
Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
Apple Support Communities Terms of Use
Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
Or it is one of the unexplained problems with the forum software right now.
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders. In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
I use the search field in HUD a lot, to filter the set of keywords shown.

How to find out which jobs are connected to the user

Hello, i have a question, but i was unable to find the answer. The problem is that our internal consultant left the company, and there are certain jobs that run under his account. We want now to switch this jobs to other accounts. The problem we are facing is how to find out what jobs, or job steps are connected with his account, so we can safely demote his account, so that no other jobs will be run under his account. Thank you very much
Sincerely,
Luka Prijic

the only reliable way to do this is by scanning table TBTCP using the person's userID in field AUTHCKNAM and filtering by job statuses: scheduled, released, ready and active (sorry I can't remember the code#'s off top of my head, something like P=scheduled, S=scheduled...you have to look it up). When you search SM37 it only permits you to scan by the userID who created the job, but it won't tell you if a different userID is defined in a job step. That's why you need to scan TBTCP. Don't forget that you should also check for a user's open Workflow items before deletion.
I noticed some posts in this forum that suggest a userID should never be deleted, only locked, added to a special user group, and all role assignments removed. However I've never worked somewhere that does this.

How to find out what user locked account

We had production type schema account locked this morning. I checked profile which this user belongs and it has 3 times for Failed Login Attempts. My question is how to find out what user had 3 unsuccessful login attempts and lock this account.
Oracle version 8.1.7

Assuming that [auditing was enabled|http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/security.htm#sthref2916], the command
AUDIT CONNECT WHENEVER NOT SUCCESSFULThat will write audit records when there is an unsuccessful login. Depending on how you've configured auditing, those records will either be written to the SYS.AUD$ table, in which case you can query them through a few different views, or to a file on the operating system that you can grep.
Justin

How to find out userid of purchase requisition at each item level

for a particular requisition at each item is released by a some user, how to find out these user name.
ex.
pur.requi     pur req item    ueser_id
10092188    00001            ?
10092188    00002            ?
10092188    00003            ?
10092188    00004            ?
in the above data purchase requisition is same but purchase
requisition items are different. in this i want to find out user
id of releaser for each item of particul purchase requisition.

dear friend
in table
there is group
tabkle : eben
field:    FRGGR
you get it easily.
rewards are expecting:
vivek

How to find out prerequisites of archiving objects?

As we plan an archiving project for our ERP system, I would like to know how to find out the prerequisites for archiving the different objects.
For example, as I know for archiving material master data, the usage of object MM_MATNR requires that the deletion flag is set on materials.
Or as I assume, orders probably can only be archived if they are delivered and closed.
How to find out these prerequisites?
Best regards
Martin

Hi Martin,
Network Graphics helps in determining the dependencies among the archiving objects.Once you have sorted out the flow you can schedule archiving in test mode to find more details.
Eg PP_ORDER you can find out why a particular order is not archivable...may be cos of unsettled balance..etc.
You can find few details about the prerequisites in the archiving run (test)
Hope this helps.
Thanks,
Priya.

How to find out the max mem can be allocatedTT for 32 bit Win ?

How to find out the maximum Permanent Data Size and Temporary Data Size that can be allocated for the Oracle Times Ten for 32 bit Windows OS.

Hi Chris,
Am I write in saying that this also depends on shared memory setting as well?
If that is the case, on a platform like window 2003 32-bit, one cannot have more than 4GB of shared memory. Windows Server 2003 includes support for a startup switch (entered in the boot.ini file) that allows the allocation of memory and memory address space. Regardless of the amount of physical memory that is installed on the system, the operating system uses a virtual address space of 4 GB. Out of that amount, by default, 2 GB is allocated to user-mode processes (for example, Oracle or TimesTen) and 2 GB is allocated to kernel-mode processes (for example the operating system and others). In a nutshell on systems that have more than 1 GB of RAM, this startup switch can be used to allocate more memory to applications (3 GB) and less memory to the operating system (1 GB). However, adding adding the /3GB switch to the boot.ini file will not increase the amount of physical RAM memory, the 3GB switch just tells the computer to allocate the existing memory space differently.
For a 32-bit TimesTen the limit on memory cannot be more than 2GB (PermSize+TempSize). For example on Linux 32-bit I have 1024MB and 512MB for these two parameters.
Thanks,
Mich

How to find out the idoc type required for our requirement

Hi,
How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
Points will be given for the useful answers
Thanks,
Prasanna

Hi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A

How to make use of SE37- Function Module & how to find out the table?

Hi ,
1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
But after giving the particular name what should i do?
Please help me.
2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
Thanks in adavnce for spending some time
Raj.S

Hi Raj
Function Modules
Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

IT 15: How to find out different cost assignment specifications

Similar Messages

Maybe you are looking for