It is not possible to work with SO becauce tis crashed during the convert

Hi!
The base-System is a original Debian 3.1 (Sarge) , I installed the SO8 above the rpm-database (mkdir /var/lib/rpm; rpm --initdb) install with the Gfx-Installer, and later with the setup-script - now I have SO 8 update 3 rev 2.
But it is not possible to save a *.xls-File or open a empty Impress-File!
SO8 crashed evry time - with OO2 it is possible to the work!
Have anyone a hint for me?
Thx
Thomas

No.

Similar Messages

  • Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

    Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

    You haven't given us much to go on here.  What exactly are you doing and what exactly happens when you try?  Which specific version of each program are you using?  (Go to Help>About...)
    On a side note, a simple, brief thread title is all that's needed.  Something like "After Effects Issue" would be fine.  You don't need the full question there.

  • Hi, can iMovie give pronlems during the boot process from my iMac Mine. I have often after working with iMovie that i get during the boot Psi SDXH pause so the boot process stops

    hi,
    can iMovie give problems during the boot process from my iMac Mini?
    I have often, after working with iMovie that i get during the boot Psi SDXH pause
    so the boot process stops at this point
    I have often reinstall OSX Mavericks
    regards,
    HenkfromWinterswijk
    Netherlands

    Hello Federico,
    Your EliteBook is a Business model.  Your issue would be best answered on the HP Enterprise Business Community Forum
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • My iPhone cable gave me a warning this morning that it was  not certified to work with this phone, but it is the cable that came with the phone and that i have been using for a year and a half.  Why?

    i plugged in my 18 month old iPhone to charge it, using the cable that came with it and that I have used regularly all along. I got a warning on my phone screen saying the cable is not certified and may not work properly with my iPhone.  Why?

    If you updated iPhone to iOS7, it now checks for real Apple Lightning Cable. Your cable may not be Apple, or someone swapped another cable with yours. Make sure the cable end is clean, take a clean dry toothbrush and carefully clean charging port on the iPhone.

  • Iphone bluetooth charging cradle--not made to work with iphone??

    About every 5 minutes, my iphone pops up with a note that "this accessory is not made to work with iphone", whenever it's in the charging cradle that came with the apple bluetooth earpiece. Anybody else see this? any idea what's up? I just love the inability to get direct communication with apple on the topic.

    I have the same problem. The same pop-up comes up when I plug the iPhone into the cradle that comes with the Apple-branded iPhone bluetooth headpiece. It didn't use to have this problem before, and the iPhone used to recognize the headset as also charging when both were in the cradle. Now, the headset does not even charge up when the iPhone is in the cradle at the same time!! I think the latest iPhone firmware upgrade messed up everything!! HELP!!!!

  • Is it possible to work with different languages in different applications?

    Hi,
    is it possible to work with different languages in different applications?
    To have f.e. Photoshop in English and Indesign in Dutch??
    Thanks!

    I am not sure about it that you can use different apps in different language in the same computer, however you can check the following links:
    http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html
    Adjust the install language | CCM
    http://tv.adobe.com/watch/learn-creative-cloud/installing-multiple-languages-of-a-desktop- application/
    Regards
    Rajshree

  • Is it possible to work with PHP pages in Oracle ERP R12 and how to set up ?

    Hi,
    Is it possible to work with PHP pages in Oracle ERP R12 and how to set up ?
    Regards
    Nandhakumar P

    Hi Nandhakumar,
    To be able to access any Oracle database using PHP you require the following:
    A server with Apache 2+  (Unix, windows etc)
    PHP enabled using OCI8
    tnsnames.ora
    Oracle instant client and associated libraries
    This gives you direct access into oracle database. As for E-Business, you will compromise the security and safty of of R12 by going in through php. Oracle is not likely to support it either.
    I have got a apache/php/Oracle XE working on a test environment and Ithe performance is not a big issue. If you must I would hughly recommend Oracle Linux for quality and security.

  • The search feature in messages does not seem to work with pre IOS 7 messages

    After updating to IOS 7 the search feature in the Messages app does not seem to work with messages received prior to the update.  Texts received since the IOS 7 update search correctly.  Is this a bug or a feature of moving to iMessages rather than just receiving standard texts?

    Although not related to your question you have outdated ShockWave Flash Player go ahead and update your flash player by going to www.get.adobe.com/flashplayer
    As for your problem, One of your add-ons might be the culprit too. Try running Firefox in [[Safe Mode]] with all add-ons disabled. If that solves the problem, see [[Troubleshooting extensions and themes]] and possibly [[Troubleshooting plugins]]

  • Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

    Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

    If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

  • "This accessory is not made to work with iPhone"

    I have a first generation iphone. It recently started showing a message that reads:
    This accessory is not made to work with iPhone
    Would you like to turn on Airplane Mode to reduce audio interference?
    You will not be able to make call during this mode
    YES NO
    There is no accessory in the phone. Any thoughts on how to stop this behavior?
    I tried reloading the OS and it didn't help.

    I was having the same problem and it was draining my battery! After reading a couple of threads I was resigned to take my 1st gen iphone to the genius bar to see if they could do something. Before going to the bar I took off my pics, videos, movies, podcasts, and some applications in preparation for my visit. That night the problem stopped. This had been happening for about 3-4 weeks so I could replicate at will. After removing things from the phone when I tried to replicate the problem it would not happen. So I then started to re-sync things one at a time. After re-syncing everything but the applications I still could not replicate the problem. My feeling is that one of the applications, or combinations of, was causing the issue. I have not re-synced all the applications at this time because I am happy to have my phone back. Hope this helps.

  • Iphone will not charge via usb-to-computer nor via brick; I've tested with two different cables. Just before this problem arose, I got messages similar to "This accessory is not made to work with iPhone."

    Most of my concern is in the subject line. I probably should've saved some content to include here. Allow me to elaborate:
    While traveling with the tiny brick, I got a message on my 3GS phone that "This accessory is not made to work with iPhone”; however, the charger was working fine with another phone and with an iPad.
    I tested alternatives by removing and re-inserting the cable (obviously, as I tested other devices), changing wall receptacles, shutting the phone off (all the way), all to no avail.
    When I got home, I plugged a different cable--one that was connected to my iMac rather than the brick--into the my 3GS; it still didn't charge.
    So, I'm hypothesizing that perhaps some debris (from a pocket?) got into the charging receptacle of the 3GS and is disrupting the connection. Perhaps there are other hypotheses.
    I am reluctant to do a reset, as (a) the problem doesn't appear to be a software issue (the phone and software are all working, though the charge is declining) and (b) I don't want to lose the contents before I can sync it (now that I'm home, again).
    I'd welcome suggestions. Meanwhile, I suppose I shall e-mail photos and notes from the phone to myself before I lose the remaining charge.

    Try to clean the 30-pin receiver slot either by blowing air into it or using a microfiber cloth. If the problem persists, based on what you've already said, I'd say the problem is most likely hardware, and would need to be replaced or repaired. I hope your iPhone is still under the 1-Year Manufacturer Warranty, or if applicaable extended warranty. You can check by calling AppleCare National iPhone Technical Support at 1 (800) 694-7466.

  • HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

    Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
    Maps took me to the completely wrong side of town for a long standing business in town.

    Hello margmcarlson,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
    Best of luck,
    Mario

  • Windows movie maker dose not seem to work with itunes music.

    Windows movie maker dose not seem to work with itunes music anymore. Hear is what happend in a nut shell.
    For reasons I can not explain I had to reinstall all my software on my Vista HP notbook. But I only had one why of saving my data music,photos. I had to use my flash drive to save everything as my DVD recoder would not work right at the time.
    So I save everything I needed and then did the deed then when that was all done and everything was working right again. I put all my photos and music back to my computer. All my music or aleast most of my music is from itunes some music is from CD I do not have anymore.
    My question is when I go to put music with my movie or slideshow with Windows movie maker. A box pops up and tells me that this song dose not have the right codec but it also tell me did I download the right codec. I have know idea what its talking about. Movie Maker worked fine with itunse music before the reinstall. I am thinking I did not save the music right though the music plays great on itunes but just will not import right to my movie project. I am at a lose for words can someone please help me shed some well needed light on this all the help I can get would be a God send thank you.

    this happens to me too can someone please tell us what is going on?

  • Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

    Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

    If this happens on monitor 2 of 2, this problem has been solved here:
    http://support.mozilla.com/en-US/questions/794823#answer-157988
    Go to "Firefox"--> "Options" --> "Advanced"
    Then un-check "Use hardware acceleration when available"
    While not verified, I believe this problem is due to an SLI configuration where the focus is on monitor 1. (I.e acceleration is available, but only on monitor 1.)

  • Please Help "This accessory is not made to work with iPhone" iPod??

    Hiya i wondered if someone here can help me please.
    Today i went to play my ipod feature on my iPhone and it started playing on the iPhone speakers which i wanted, Then all of a sudden it stoped i checked it out and had an error message saying the following.
    "This accessory is not made to work with iPhone
    Do you wish to switch to aeroplane mode
    YES/NO"
    There is no accessory connected to the phone and also it has not been in contact with water which i heard sometimes triggers this error.
    When i press the NO option the volume cuts out and the volume slider disapears on the ipod and also the volume buttons dont work.
    I dont really want to factory restore it but if thats my only option then i will do it. Also i have only had the phone for less than 20 days.
    Any Help/Advice is really apprieciated.

    Check your iPhone's dock connector port for any dirt, lint, or foreign material, and it doesn't take much.
    If clear, the standard troubleshooting steps in order are power your iPhone off and on, an iPhone reset - which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so, restoring your iPhone with iTunes from your iPhone's backup, and restoring as a new iPhone or not from your iPhone's backup.
    If no change after any of these steps in order, you can call AppleCare or make an appointment at an Apple store if there is one nearby.

Maybe you are looking for

  • Replacing a NW 6.5 server that is a SLP DA

    Hi everyone, I will be replacing a Netware 6.5 server that is also one (of 2) of our SLP DAs. The new server will have the same name and I/P address. When I remove eDirectory from the current server (in preparation to install the replacement), I assu

  • Album Artwork sucking in other albums

    I have already looked at http://support.apple.com/kb/TS1468 Say I have audio books A, B, and C. Each of them is a 4 part audiobook. When I look at them by Album scroll list, I see 4 of A, 4 of B, 4 of C. Tracking? So, I right-click on on the 4 parts

  • No update because of invalid path

    Hi, since my daughter used our external hard disc on her Laptop the path of the disc changed from J: to L:. Allthough only the music is on the external disc, every time I try to update itunes it says unvalid path J:. I tried to chnage the name of the

  • PS Photography Program Availability?

    In all the online information I understood that the Photography program (PS +LR) was available at a flat rate to owners of CS3+ at a special offer until 31 December? I am aware the price is different depending on region. But could someone please expl

  • Prime Infrastructure License types

    I am trying to figure out the licensing with Cisco Prime Infrastructure...We are running 2.2 I believe that we have just the base device License, I am trying to enable NetFlow on devices in the network, but I don't see anything in PI for NetFlow and