IT0041 - employee with more than 12 date types;

Has anyone had an instance where an employee has had more than 12 valid Date Types on IT0041? If so, how did you enter their 13th date type? We have just created our 12th date type in the table and we will probably be creating a 13th date type in the near future. We have a number of employees who already use 11 date types and could use the 2 new ones as well. I tried to create a new Subtype for my new Date Type - but the new Subtype requires that Date Type 01 be entered. I am not comfortable with having two identical Date Type 01s in IT0041 (one on Subtype 0001 and one on Subtype 0098).
Has anyone used more than one Subtype on IT0041?

Thank you for your responses. I don't think changing the Time Constraint class is the best solution for our organization. We did look at that option. I don't want to have multiple valid records; I want the ability to have more than 12 date types (values) on one record. Also, if we allow more than one record, SAP forces us to have Date Type 01 on both valid records - I would be concerned that these values may not match, and then Time Eval would bomb.
I'm also still curious if anyone has used more than one Subtype on IT0041? Again, we did try this, but SAP forces a Date Type 01 on both Subtypes.

Similar Messages

Create a logical column with more than one data source

I'm having a problem to create a logical column with more than one data source in Siebel 7.8.
What I want to do is the union of 2 physical tables in one logical table.
For example, I have a "local_clients" table and a "abroad_clients" table. What I want is to have a logical table "clients" with the client data from the 2 tables.
What I've tried is dragging the datasources I need onto the logical column.
However this isn't working because it only retrieves the data from the first data source.

Hi!
I think it is not possible to do this just by dragging the columns to the logical table. A logical table can have more than one source, but I think each column must have just one direct source column.
I'm not sure, but maybe you should do the UNION SQL to get the data of the two tables. In the physical layer, when you create a new physical table, it's possible to set the "table type" as a "SELECT". I didn't try that, but it seems that it's possible to have the union table in the physical layer.
Bye.
Message was edited by:
user578388

Get the data with more than one of the desired value

Hi,
I need to pull the records with more than one value of 'Other' on the delivery days fields.
The delivery fields are mon,tue,wed,thu,fri and sat that tells the where the item will be delivered. The value can be Home, Work, or Other.
Here is the Sample data:
cust_id: 123
item: newspaper
mon: Home
tue:Work
wed: Other
thu: Home
fri: Other
sat: Other
And here is my query so far.
select
cust_id,
item,
mon,
tue,
wed,
thu,
fri,
sat,
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1
else 0 end) as day_ctr
from customer
Could you please help me with the right formula I need to get this?
Thank you in advance..

First
DESC customer
Second
Can you explain what you are trying with
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1 else 0 end) as day_ctr
Third
Usually it's helpful a example of the result you want...
Perhaps you want this
select DECODE(mon,1,(select distinct mon from customer), 'OTHER') mon,
        DECODE(tue,1,(select distinct tue from customer), 'OTHER') tue,
        DECODE(wed,1,(select distinct wed from customer), 'OTHER') wed,
        DECODE(thu,1,(select distinct thu from customer), 'OTHER') thu,
        DECODE(fri,1,(select distinct fri from customer), 'OTHER') fri,
        DECODE(sat,1,(select distinct sat from customer), 'OTHER') sat from
select
COUNT(DISTINCT mon) mon,
COUNT(DISTINCT tue) tue,
COUNT(DISTINCT wed) wed,
COUNT(DISTINCT thu) thu,
COUNT(DISTINCT fri) fri,
COUNT(DISTINCT sat ) sat
from customer
)

Read CAN Data message With more Than 64 bits

Dear All,
I'm working With CAN card PCI Series 2 with Labview 8.2.1 and Measurement and automation 5.1.
I'm making measures from an ECU.
This one (please see piture) is composed with more than 64 bits for one ID.
I don't found how I can read those Data using "Channel API". Is It possible ?
On MAX I am not able to creat CAN Task measure with more Than 64 bits...
It is necessary to use only "Frame API".
Thanks for repply.
Regards
Solved!
Go to Solution.
Attachments:
Transmition_Data _ECU_ A_50Hz.JPG ‏80 KB

NI-CAN Channel API is not able to deal with Multi frame messages, so you would need to use the NI-CAN Frame API to read the Multi frame message and do the conversion into physical values on your own.

How do I share my contacts with more than one group? I really don't want to have re-type them into a different group. Help!

How do I share my contacts with more than one group without having to re-type them into each group?

Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Send email from SAP with more than one attachment

Hi all,
How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
Besr regards,
Munur

Hi,
I use :
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
the main problem with different attachemts is to genereate the packing_list.
the packing list is a kind of description of the data table... where ist the start of an image, end, size...
"Creation of the entry for the compressed attachment
        objpack-transf_bin = 'X'.                    " it could be an image
        objpack-head_num = lv_head_num_count . " inital 1 each att add 1
        objpack-head_start = 1.                     " fix
        objpack-body_start = gv_startnum.    " table with attachments 1. line one
        objpack-body_num = tab_lines.          " how many lines are in the table of attachment
        objpack-doc_size = tab_lines * 255.   " size of the attachment...
       objpack-doc_type = lv_typ . " 'JPG'.
        objpack-obj_name = 'ATTACHMENT'.
        objpack-obj_descr = lv_stripped_name " name of the JPG
   APPEND objpack.
   APPEND LINES OF lt_goscontent TO gt_maildata. " data Table...
bestreg
robert

Tax code with more than one tax rate

Hi,
I am using TAXINN procedure and I created on tax codes with more than one rate. i.e. for service tax I created a tax code S1 with 3 rates as follows
Acc. Key    Tax %      condition type
VS9            12             JSE4
VS0              2             JES4
VSS              1             JHS4
When I am trying to post a document with the above tax code the system is giving the following error message
Tax code S1 may only contain one assignment line
Message no. FF731
Diagnosis
For direct postings to tax accounts, only tax codes containing exactly one tax line may be used. Tax codes with several rates or a nondeductible portion are not allowed here.
Procedure
Use a different tax code.
For direct postings to a tax account, you might have to define a separate tax code for which only one line with a percentage rate other than zero is active in percentage rate maintenance. All other lines must be inactive.
To do this, choose Maintain entries (F5).
Could you please let me know how to rectify this problem? I want to post 3 line items for each of base rate, Edu. Cess and Higher Edu.cess.
Advance thanks for your help and
Regards
Koteswara Rao Padarti

The problem is in the master data of the revenue account. the tax category should not be > and it should be *

Report with more than 30 columns

XML Pub Gurus,
I have a requirement where I need to create a table layout with proper spacing for more than 30 columns and I asked this question in Open World XML Pub team and they responded to my question as "The page size in word has to be increased to allow to add those many columns". I was satisfied with the answer without knowing that Word will not allow more than 22" long in landscape. So, I am puzzled with the answer in Open World.
So, could somebody please give me guide lines to create this type of report for more than 30 Columns. This is very common requirement for us to report some of the stuff from the db.
Thanks in advance
Ram G

What do you want your final destination format to be? I'm thinking you'll probably want to go out to HTML or Excel. I would think that would be the only place where you could read and use a report with more than 30 columns.
Here's an idea if you want to go to excel and if you are using the 10.1.3.2 Enterprise (standalone) version.
1. Create your query with as many columns as you want.
2. Don't create a layout at all
3. Launch Excel Analyzer.
4. From within Excel, build your report based off the downloaded data (for example add a pivot table).
5. Upload your excel Analyzer template back to the server
This template can now be scheduled and delivered like normal templates or updated with current data directly from within Excel.

Document/literal style wsdl with more than one port

Recently I have changed wsdl style from rpc/encoded to document/literal as BPEL does not handle soapenc:arrayType. The wsdl contains 2 operations and few complex type definitions.
In BPEL Designer I have created a process that invokes all operations defined in the wsdl, but only one of them will have some data in the response message and the other one will have an empty message. On the other hand, when I use stub generation to invoke Web Service everything is working fine.
If I provide separate wsdl for each operation (in BPEL process I would have two partnerLinks instead of one) than it works fine.
Does this mean that BPEL does not handle document/literal style endpoints with more than one port (operation)?
I have tested this with the orabpel_2.0_J1_win32.exe and orabpel_2.0rc9_win32.exe. Web Services, used for this test, are deployed in Jboss 3.2.3 and axis-1_2beta3.
WSDL used as partnerLink:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions targetNamespace="http://test" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://test" xmlns:intf="http://test" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<schema elementFormDefault="qualified" targetNamespace="http://test" xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="CardId">
<sequence>
<element name="cardType" nillable="true" type="xsd:string" />
<element name="number" nillable="true" type="xsd:string" />
</sequence>
</complexType>
<complexType name="CardIdArray">
<sequence>
<element maxOccurs="unbounded" name="item" nillable="true" type="impl:CardId" />
</sequence>
</complexType>
<element name="getCardsReturn" type="impl:CardIdArray" />
<complexType name="CardholderCards">
<sequence>
<element maxOccurs="unbounded" name="cards" nillable="true" type="impl:CardId" />
<element name="serialNumber" nillable="true" type="xsd:string" />
</sequence>
</complexType>
<element name="retrieveChReturn" type="impl:CardholderCards" />
</schema>
</wsdl:types>
<wsdl:message name="retrieveChRequest" />
<wsdl:message name="getCardsRequest" />
<wsdl:message name="retrieveChResponse">
<wsdl:part element="impl:retrieveChReturn" name="retrieveChReturn" />
</wsdl:message>
<wsdl:message name="getCardsResponse">
<wsdl:part element="impl:getCardsReturn" name="getCardsReturn" />
</wsdl:message>
<wsdl:portType name="TestService">
<wsdl:operation name="getCards">
<wsdl:input message="impl:getCardsRequest" name="getCardsRequest" />
<wsdl:output message="impl:getCardsResponse" name="getCardsResponse" />
</wsdl:operation>
<wsdl:operation name="retrieveCh">
<wsdl:input message="impl:retrieveChRequest" name="retrieveChRequest" />
<wsdl:output message="impl:retrieveChResponse" name="retrieveChResponse" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TestServiceSoapBinding" type="impl:TestService">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
<wsdl:operation name="getCards">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="getCardsRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="getCardsResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="retrieveCh">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="retrieveChRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="retrieveChResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TestServiceService">
<wsdl:port binding="impl:TestServiceSoapBinding" name="TestService">
<wsdlsoap:address location="http://localhost:8080/axis/services/TestService" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

Hi Dragana,
We definitely support the ability to call a web service that exposes two operations (document/literal or not).
Glancing through your WSDL, it looks good.
Could you please try to tunnel the second request and see 1) what data is sent to the service and 2) what data is returned by the service?
Can you please email us a reproduceable case so that we can help troubleshoot in parallel?
Thank you,
Edwin
[email protected]
please rename .zip to .zap

Function with more than one return value

Hi
Please let me know how to write a function with more than one return value and in what scenario should we go for this option.
Thank you

user12540019 wrote:
Please let me know how to write a function with more than one return value and in what scenario should we go for this option.Yes. And the following is the correct approach (using OUT variables is not!) - you deal with the multiple values as a data structure. This example uses an custom (user-defined) SQL data type as the structure.
SQL> create or replace type TXYcoord is object(
2          x       number,
3          y       number
4 );
5 /
Type created.
SQL>
SQL>
SQL> create or replace function fooCoordinate( someParam number ) return TXYCoord is
2 begin
3          -- doing some kind of calculation using input parameters
4          -- etc..
5
6          -- returning the multiple return values as a proper data structure
7          return(
8                  TXYcoord( 0, 0 )
9          );
10 end;
11 /
Function created.
SQL>
SQL> -- selecting the data structure
SQL> select
2          sysdate,
3          fooCoordinate(123)      as XY
4 from       dual;
SYSDATE             XY(X, Y)
2010-02-01 08:49:23 TXYCOORD(0, 0)
SQL>
SQL> -- selecting the properties/fields of the data structure
SQL> select
2          sysdate,
3          treat( fooCoordinate(123) as TXYcoord).x        as X,
4          treat( fooCoordinate(123) as TXYcoord).y        as Y
5 from       dual;
SYSDATE                      X          Y
2010-02-01 08:49:23          0          0
SQL>

Pl/sql Procedure is Not Creating With the CLOB data Type

Hi,
I am Using Oracle 10g Express Edition Release2.... My Doubt is While creating a table With CLOB Data Type the table is created successfully,but while Creating a Procedure With the CLOB Data type i am getting an Error Message
2667/5 PL/SQL: Statement ignored
2667/24 PLS-00382: expression is of wrong type
then i tried With the Varchar2(30000) the Procedure is Created Successfully note i have not changed any thing in my code except the data type.
I am Just Confused ......Why the Procedure is not Created with CLOB Data type?
Please advice ...
Thank U
SHAN

hi,
Thanks for reply....Another Example
CREATE TABLE USER_MAS (USER_ID VARCHAR2 (20 Byte),MAIL_ID VARCHAR2 (255 Byte));
set serveroutput on
declare
atable varchar2(64) := 'USER_MAS';
acolumn varchar2(64) := 'MAIL_ID';
avalue varchar2(64) := 'NEWYORK' ;
dyn_sql clob;
begin
dyn_sql := 'update '||atable||' set '||acolumn||' = '''||avalue|| '''' ;
dbms_output.put_line(dyn_sql);
execute immediate dyn_sql;
end;
commit ;
Error at line 2
ORA-06550: line 9, column 23:
PLS-00382: expression is of wrong type
ORA-06550: line 9, column 5:
PL/SQL: Statement ignored
When i Changed the Data type to varchar2(64)
update USER_MAS set MAIL_ID = 'NEWYORK'
PL/SQL procedure successfully completed.
Commit complete.
I like to Know the Reason Why the Procedure is Not Created in Oracle 10g XE DB
Note :the Same Script i used in 11g DB the Procedure is Created Successfully....
Why you need use CLOB or VARCHAR2 in your temp_num variable as you sending parameters as number?
In the Procedure we are create some run time queries while executing the procedure. There are around 10 run time queries created.
The size of each query is more than 4000 characters . We then add all the queries using union all after each query to the clob variable as the normal varchar will not support.
Please Advice
Thank U
SHAN

Bugged audio playback? When I start working with more than 1 audio track.

Hi!
I have been using premiere elements 12 for editing FullHD videos.
Brand new for me just bought it like 2 weeks ago.
Now during the last couple weeks I have had this MAJOR proglem with editing the audio.
This problem is headache and turns my simple editing into almost impossibilites.
I have had this problem with all my projects. _ALL_
Usually the problem seems to appear when I want to start working with several audio tracks.
At somepoint my projects just get ruined, I simply cannot hear the audio tracks.
The audio starts to disapear randomly from all the audio tracks.
It is not only playback problem. When I exported the video, the audio was partly missing, same as the project.
I have tried to look help on forums and search all what I could find, but havent been able to solve this.
Small fix has slightly helped:
I export audio to single track and bring it back to project. This works but I still usually have more editing to do.
I simply cannot understand why the playback disapears, I fear it is a bug.
I found lot of earlier version problems on people with similar type of problems, but no help for this version of program.
To solve the matter I have changed my audio setting in PE12.
Tried Premiere Elements WDM Sound and ASIO4ALL V2, but same problem on both.
I have looked up that my audio playback device and PE12 matches, and are not muted, and volumes maxed.
I have deleted my C:\ appdata\roaming\adobe premiere elements & premiere elements 12 folder preferences.. not helping..
I press the update pretty much everyday hoping for new version.. But yes, program keeps telling me its the latest.
I usually only work with 3 audio track maxinum. And I am doing really the most basic stuff here..
I have set all my audios to foreground and it has given me best results, but it does not seem to take the problem away as at somepoint randomly my audio playback is missing again, randomly across the playback.
Please anyone? I am feeling hopeless here.
Info on my computer:
Operating system: Win7
Processor: AMD Phenom(tm) x4 955 processor 3.20 GHz
memory (RAM): 4GB
system: 64bit
<moved from downloading, installing, setting up forum by mod- kglad>
Message was edited by: kglad

First of all, thank you for replying my message!
I will go and try to answer best I can.
Source media properties:
Progressive frame rate, I record this from a game.
Recording program: dxtory
codec: Lagarith Lossless codec
Format: avi
Frame width: 1920
Frame height: 1080
Data rate: 1990656kbps
total bit rate 1992192kbps
Frame rate 30/frames/seccond
Audio of video properties:
Codec: PCM
Format: 16bit, stereo
Bit rate: 1536kbps
Channels: 2(stereo)
Audio sample rate 48 kHz
In addition to that I use wav files for music and narrate
Music files sizes 20-50mb
bit rate: ~1411kbps
In total sizes of audio involved is usually something like 300mb
What are you or the program setting as the project preset in the new project dialog. See Edit Menu/Project Settings/General and its Editing Mode, Timebase, and Frame Size readings.
I opened new project and this is what i got:
Editing mode: HD 1080i
Timebase: 25,00 frames/second
Frame size: 1920 x1080
Audio is 48000 Hz
(I dont know how to change these, btw. Program don't seem to let me change editing mode.
I also looked up my most recent project and found these settings:
Editing Mode: DSLR
Timebase: 30,00 frames/second
Frame size: 1920 x1080
..and same audio settings
Do the problems persist if you start a new project? Do you find the audio problems develop when the Timeline content is fairly well developed or can the problems occur when there a minimal amount of content of those tracks? Let us look at the size and duration of this project.
Yes, I have had this problem with all my projects. Sometimes it goes away tho, just enough for me to work bit more. My work progress usually starts by clipping the video material, like 1h material to 8minutes in clips. After that I want to work with audio tracks, and here problems start! When I start working with more than 1 track, so the problem is at later stage. To fix the problem a small fix I have used, I export audio like music and effects tracks together to 1 wav and bring it back. After that, I start working with narrate track. To describe the problem with audio:
Audio Randomly starts to disapear when I playback, and can also be gone if I export the video out.
My source videos total size are usually within 80Gb max limit and audio edit material 300mb total.
In my last project my biggest source video was 47GB and leingth of 1h 4m, in addition to that I had 3 smaller videos, sizes of 1GB, 1,54GB and 300MB.
Is there any evidence that you are accidentially moving the audio track rubberband to alter the audio volume. That rubberband is the orange line that runs horizontally through the middle of the audio clip when you are looking at the wave form display style of that audio track. The rubberband represents audio volume.
No, audio volumes might have been adjusted in my tracks but they are present. The problem is usually like ~2-5seconds, a random audio track can be heard (like music or narrate) or just no sounds at all. This makes it very difficult to work with the audio. Also I gotta say that this problem starts by simply having the 2-3 audio tracks.. In my recent project the only adjustment I used to edit the audio was fade in/out.
I don't have any other audio problems with any other programs.
I am more than happy to provide more information if needed. I hope this information helps.
In addition I can say that when I close Adobe Premiere Elements 12, it crashes. No idea why.
I have also looked up my firewall settings, anything involved adobe and premiere..
In addition some effects like HD text templates make "Adobe Media Core CS6" crash. I tend to just not use em, or if I need em, I add em at end of the edits.
I hope this helps, I would really like to solve this problem.
Thank you alot for taking the time to answer! I welcome anyone to help mee too! Please giev links to similar problems too. Thank you everybody!

Building a table with a string data type

I am using the Build Table function and I would like to be able to label my columns on the first iteration with a string data type, which doesn't seem to be an acceptable signal for the Build Table function. However, the express table is located under "text indicators" on the front panel, so it seems like there should be a way to do this..

Ah, the "Build Table" Express VI. I hate Express VIs.
That Express VI is nothing more than a really complicated way of creating a 2D array of strings. The Express VI has no inputs for the row and column headers, so you need to add them in yourself. The same would be true for a regular table control/indicator. Here's what you need to do:
Right-click on the table indicator and select Visible Items -> Column Headers.
Right-click on the table indicator and select Create -> Property Node -> Column Header Strings[]. LabVIEW will attach a property node to the cursor and switch to the block diagram. Plop down the property node on the block diagram.
Right-click on the property node on the block diagram and select "Change All to Write".
Right-click on the property node and select "Create -> Constant". This will give you an array of strings, and you can enter the column headers in each array element.
Wire the array to the property node.
Connect the property node to the Build Table Express VI using the error clusters.
Message Edited by smercurio_fc on 07-02-2008 09:25 AM
Attachments:
Example_VI_BD6.png ‏3 KB

Call Transaction and fill a select-options field with more than one value?

Hello everybody,
how can I fill a select-options field with more than one value.
Here is the code example:
CLEAR: GT_BDCDATA, GS_BDCDATA.
GS_BDCDATA-program = 'RHALEINI'.
GS_BDCDATA-DYNPRO = '1000'.
GS_BDCDATA-DYNBEGIN = 'X'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
GS_BDCDATA-FNAM = 'PCHOTYPE'.
GS_BDCDATA-FVAL = 'P'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
LOOP AT gt_hrobjinfty INTO gs_hrobjinfty.
    GS_BDCDATA-FNAM = 'PCHOBJID-LOW'.
    GS_BDCDATA-FVAL = gs_hrobjinfty-objid.
    APPEND GS_BDCDATA TO GT_BDCDATA.
    CLEAR: GS_BDCDATA.
ENDLOOP.
CALL TRANSACTION 'PFAL' USING GT_BDCDATA MODE 'A'
                   MESSAGES INTO GT_MESSAGES.
THX.

Hi,
Please refer the code below:
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
* load each personnel number accessed from the structure into
* parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
Thanks,
Sriram Ponna.

IT0041 - employee with more than 12 date types;

Similar Messages

Maybe you are looking for