Item 000010 does not exist - Error Message V1331 in VA41

Dear Experts,
We r implementing PS module for a client.
I am using a exit MV45AFZZ, in which i have a perform ZVALIDATEWBS, i am calling this include through a subroutine.
In this ZVALIDATEWBS routine -> i have validated 2 conditions
1. Validation for Partner function and
2. Validation for WBS element.
For 1 ---> I am comparing with VBPA partner and throwing error message if the partner entered doesnt match with the project code
For 2 ---> i am checking the status in JEST table if STAT = 'I001' and INACT field = 'X' for a object number i am throwing error as " WBS must be in u2018 Created-CRTDu2019 status".
The problem which iam facing is...
After entering the line item and WBS for the material and after doing Incompletion log and pressing save i am getting a error stating
"Item 000010 does not exist" ( Message no. V1331)
When i comment the error message which is thrown in my exit i am able to save without any error message, i am not getting the standard error - "Item 000010 does not exist" (Message no V1331).
When i debug the code i am not able to predict, becuse if i comment the messages(only message not the whole exit) the standard program called is different, when i uncomment and check them its going for some different program.
Kindly help me in this regard.
thanks
Krish

Hello Krishna,
Thanks for the reply
this message was from the standard SAP i just copy pasted the message.
a STOP icon in the front along with this following message -> "Item 000010 does not exist",
If u can able to give ur mail id i can send the screen shot also. But any clues w.r.to this error.. anything should i need to check in.
kindly advice
thanks
Krish.

Similar Messages

Item 000010 does not exist Message no. V1331

Hi Experts
While creating third party sales order with Item Category "TAS", I am getting the error "Item 000010 does not exist
Message no. V1331" . What would be reason for it and also kindly help me with the solution for this.
Thanks and Regards
M.Dheerendar Jain

Hi,
Check the following OSS notes, if they're applicable:
127309      Error V1331 when you create sales orders
420093      Message V1331 with item entry in the sales order
1375071      Message V1 331 when you create subitems using IDocs
Regards,
Raghu.

Error "Item 000010 does not exist" while creating sales order in VA01

Dear All,
As per customer requirement we are trying to validate shipping data( item level) and unloading point( item level) by customer enhancement.
Enhancement:       V45A0003
Function Module:    EXIT_SAPMV45A_003
INCLUDE:                ZXVVAU05
Inside include we have written validation code that if user enters any wrong value for shipping data or unloading data
system will throw error message accordingly.
It is working fine and we are getting error message if wrong shipping data or unloading data is entered.
But after the error message is displayed if we try to save the sales order again system throws a STOP message as a POPUP
saying "Item 000010 does not exist".
Now,if we enter proper shipping data or unloading data and try to save the salesorder it is throwing error "Item 000010 does not exist"..
Please let me know your valuable input on this.
Regards
Arindam
Edited by: Arindam Ganguly on Mar 11, 2010 1:55 PM

It sounds like your error routine has prevented the insertion of the data in VBAP or XVBAP internal tables. Therefore, upon return to the screen and SAVE, SAP is examining the VBAP or XVBAP table, comparing to the 'I' index table probably, and finding that there is supposed to be an item 10, but it's not in the necessary table(s).    This may be resulting because your internal tables are now inconsistent.
Look at where your inserted error coding is occurring...you may want to move that to the SAVE_DOCUMENT_PREPARE routine in MV45AFZZ, so that everything will have been built, and a final check of the content will stop the sales order save until the data is corrected.
Edited by: Breakpoint on Mar 11, 2010 3:29 PM

"Item 000010 does not exist" During VA01 save

Hi all,
I have performed a validation to throw a error message if the validation fails. The code is written in side userexit_save_document, I get my error message which is correct. After my message gets triggered SAP standard popup error messgae "Item 000010 does not exist" gets triggered. I need to avoid this SAP stand message.
After my error message i have used EXIT statement.. during debug i found that the code goes to the sap standard after the error message instead of EXIT statement. It seems like there is screen sequence change. Any help would be appreciated.
Thanks

Hi,
Are you deleting the item and raising message? You get the standard SAP message if you delete item from XVBAP.
Don't delete it.
Try this:
Message S208(00) display like 'E' with <Your Message>.
Set screen sy-dynnr.
leave screen.
Sridhar

Package does not exist error-message

When I try to compile a java servlet with the following piece of code I get a compilation error referring to the import statement.
I have just included the initial import statements. A large number of errors follow, as a result of this 'package does not exist error-message'.
Has anyone encountered this or any ideas?
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.* ;
import java.io.* ;
import java.sql.* ;
import com.ericsson.snf.mps.mppapi.mtlr.*;
The error messages come from the 'import com.ericsson.snf.........' statement.
I am trying to integrate ericsson software, into my application.
Thanks,
java-mobile-user

That's probably because you are trying to integrate j2me suff with j2se/ee. That won't work without los of extra work..

Number range does not exist error message while releasing billing document

Hi,
We are trying to release a billing document to Accounting through VF02. But the system throws an error message that "For object RF_BELEG 1000, number range interval does not exist FBN1". Note : System does not specify which number range is missing...
There are existing number range intervals for the company code which looks fine. Any advise where this number ranges are missing.
Regards,
Sakthy

Hi,
I suggest you to check the which document type has assigned for biiling document and against that document type , have to ssign the id for number range and check whethere internal assignment or external assignment.
I hope this will make sense.
Panneer

SAP TAO Consolidation & CBASE_INIT.VBS.txt does not exist error message

Hi All,
I installed SAP TAO SP03 & have QC 10.0 & QTP 10.0 and recorded a sample transaction code and observedfollowing errors:
i) I recorded a transaction and opened the script from "Consolidation" tab from Configuration Tab and got an error popup saying that u201CUnhandled exceptions have occurred"
ii) Without using Consolidation, tried to run manually got an error saying that ""[QualityCenter] Subject\BPT Resources\Libraries\CBASE_Init.vbs.txt does not exist but i uploaded the file in the same location.
iii) Tried to recording using UI scanner and itu2019s not recognizing "Tabs" and some of the fields. I donu2019t know why some fields
are missing and "Tabs" headings too. Like "BASIC data" "Payment Data" are two tabs so "BASIC DATA" is not recognizing and under that some of fields u201CInvoice dates, Posting Datesu201D fields are not scanning. So used Object Spy but itu2019s so challenge to scan each and every field.
Please advice.
Thanks a lot for your help and very much appreciated in advance.
Regards,
Ram
Edited by: Rambabu Challa on Aug 25, 2010 9:14 AM
Edited by: Rambabu Challa on Aug 25, 2010 9:16 AM
Edited by: Rambabu Challa on Aug 25, 2010 9:20 AM

Hi Guys,
I have resolved the "CBASE" error but i am not able to resolve "Consolidation" error message: here is the more details about the error . Any thoughts please
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System: Object reference not set to an instance of an object.
   at SAP.TAO.HpIntegration.Consolidator.GetTestsInFolderNode(TreeNode targetNode, Int32[] icons)
   at SAP.TAO.Consolidation.PnlConsolidate.tvTestPlans_BeforeExpand(Object sender, TreeViewCancelEventArgs e)
   at System.Windows.Forms.TreeView.OnBeforeExpand(TreeViewCancelEventArgs e)
   at System.Windows.Forms.TreeView.TvnExpanding(NMTREEVIEW* nmtv)
   at System.Windows.Forms.TreeView.WmNotify(Message& m)
   at System.Windows.Forms.TreeView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
SAPTAO
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAO.exe
SAPTAOCommon
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOCommon.DLL
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
SAPTAOHpIntegration
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOHpIntegration.DLL
SAPTAOHpQCNetModule
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOHpQCNetModule.DLL
SAPTAOHpQCNetModule9
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOHpQCNetModule9.DLL
Interop.TDAPIOLELib
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/Interop.TDAPIOLELib.DLL
SAPTAOHpQCNetModule10
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOHpQCNetModule10.DLL
SAPTAOSelfCheck
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOSelfCheck.DLL
SAPTAOGuiScripting
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOGuiScripting.DLL
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
SAPTAOObjectSpyControl
    Assembly Version: 2.0.3.0
    Win32 Version: 2.0.3.0.201007020730
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/SAPTAOObjectSpyControl.DLL
Interop.SapROTWr
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/Interop.SapROTWr.DLL
Interop.SAPFEWSELib
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/Interop.SAPFEWSELib.DLL
System.Management
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
Interop.TDAPIOLELIB10
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/SAP/SAP%20TAO/Interop.TDAPIOLELIB10.DLL
CustomMarshalers
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_32/CustomMarshalers/2.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
And also tried to record a transaction and when i am running , it is take so much time to execute . I don't know why.
Thanks for your inputs.
Ram.

BUS2080 "OBJECT DOES NOT EXIST" error message....

Hi Gurus,
I am trying to create a workflow for Service Process Notification in SWDD using BO BUS2080 . The Work Flow is activated without any errors but when i enter the instance number it comes as "OBJECT DOES NOT EXIST".
I created a subtype for BUS2080 ,delegated the object and i am using the parent object in my work flow.Please help me out in executing my Work Flow.
Thanks,
Syed.

Please check first in SWO1 whether the object instance exist or not. I hope you are giving the right key fields. First test with correct key fields thru SWO1.
<b>Reward points if useful</b>

"Archive file does not exist" error message in KSB1

I'm fairly new to SAP, and I am receiving this error in KSB1: Archive file 000786-002 CO_ITEM does not exist.
When my co-worker runs the report using the same cost center, data is returned. We are running this for the current accounting period. Is there some kind of setting or other access I need in order to view this? Any help is much appreciated.

Hi,
Please, refer to note 143135.
Regards,
Eli

"package javax.media does not exist" error message. Help!

May be this is a rookie problem, but I can't solve it by myself.
I'm using JBuider X to develop a GUI, and need to capture an image, from a web cam or so, and to save it in DB.
The problem is: I found some source codes wich are supposed to do this... but they references (imports) an javax.media class... and the JBuilder says that this class doesn't exists.
Can anyone help me?
Where can I get the class, and how I inform to JBuider where it's located?
Thanks in advance.
Ernesto Becker

Project tab, "Build", Libraries -> import the JMF libraries. Something like that.

Getting error 'Item 00000 does not exist' while creating a salse order

Hi All,
We are facing an issue, we get an error message saying 'Item 00000 does not exist' while creating a sales order for a particular order type, we do not get this problem with all the materials, only a few of them and the materials which give a problem are part of the supersession chain. The problem is not even coming for all the superseded materials.
This problem is occuring with none of the other order types but just one. We have compared the configuration for the order types for which this error is not coming and the order type which is giving the problem, and its exactly the same.
When creating the sales order through VA01 even though the error message comes, but on hitting the enter button the processing goes further. But when creating the sales order through the background program the processing stops the moment the error message comes and the Sales Order does not get created.
Your valuable suggestions for helping us resolving this issue will be highly appreciated.
Regards,
Geeta

HI Geeta
As per your post "Problem is when you are executing VA01 in background sales orders are not generating due to error message".
Apart from configuration check alternative is "Take ABAPer's help and change this error message type to warning/information message type in the system". With warning/information message type you could be able to create sales orders in background also.
try and revert

Item does not exist error when updating item

Hi,
I have a list called "Deal" and I have a ItemUpdated event to update the item permission based on a list field "Owner".
I find the code run well with site collection administrator account. If I use a regular user account to edit the item, it throws "Item does not exist" error after clicking save button. But the item is actually updated.
I run the code under debug mode and it does not throw any exception. But the page shows "Item doex not exist" error.
If I retract the solution, the item can be updated normally without any error.
My code and the error message:
public override void ItemUpdated(SPItemEventProperties properties)
if (properties.ListTitle.Equals("Deal"))
base.ItemUpdated(properties);
try
SPSecurity.RunWithElevatedPrivileges(delegate
using (SPSite elevatedSite = new SPSite(properties.SiteId))
using (SPWeb elevatedWeb = elevatedSite.OpenWeb())
SPList elevatedList = elevatedWeb.Lists[properties.ListId];
SPListItem elevatedListItem = elevatedList.Items.GetItemById(properties.ListItem.ID);
// Get Lead owner
SPFieldUserValue uValue = (SPFieldUserValue)elevatedListItem.Fields["Owner"].GetFieldValue(elevatedListItem["Owner"].ToString());
SPUser owner = uValue.User;
bool oldValue = elevatedWeb.AllowUnsafeUpdates;
elevatedWeb.AllowUnsafeUpdates = true;
elevatedListItem.ResetRoleInheritance();
// Break inheritance and clear permissions on list item
if (!properties.ListItem.HasUniqueRoleAssignments)
elevatedListItem.BreakRoleInheritance(false);
// Add permissions for current user
this.SetPermissionsForUser(elevatedWeb, elevatedListItem, owner, "LeadsOwnerPermission");
this.EventFiringEnabled = false;
elevatedListItem.SystemUpdate();
this.EventFiringEnabled = true;
elevatedWeb.AllowUnsafeUpdates = oldValue;
catch (Exception ex)
COMException (0x81020016): Item does not exist.
The page you selected contains an item that does not exist. It may have been deleted by another user.<nativehr>0x81020016</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +0
Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +256
[SPException: Item does not exist.
The page you selected contains an item that does not exist. It may have been deleted by another user.]
Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex) +24356360
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +4064980
Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit() +378
Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e) +24
Microsoft.SharePoint.WebControls.SaveButton.OnBubbleEvent(Object source, EventArgs e) +727
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +70
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2981

Can you try removing user permissions iteratively.
The sample code will look like this.
//get usernames
string tempFieldValue = listItem["Assigned To"].ToString();
string[] userNameArray = listItem["Assigned To"].ToString().Split(';');
//remove permissions first
web.AllowUnsafeUpdates = true;
listItem.BreakRoleInheritance(false);
SPRoleAssignmentCollection raCollection = listItem.RoleAssignments;
//remove exisiting permissions one by one
for (int a = raCollection.Count - 1; a >= 0; a--)
raCollection.Remove(a);
for (int i = 1; i < userNameArray.Length; i++)
tempFieldValue = userNameArray[i].Replace("#", "");
userName = web.AllUsers[tempFieldValue];
toAddress = userName.Email;
SPSecurity.RunWithElevatedPrivileges(delegate()
//EMAIL USER
bool result = SPUtility.SendEmail(web, appendHtmlTag, htmlEncode, toAddress, subject, message);
//PERMISSIONS
//grant permissions for specific list item
SPRoleDefinition roleDefintion = web.RoleDefinitions.GetByType(SPRoleType.Contributor);
SPRoleAssignment roleAssignment = new SPRoleAssignment(userName);
roleAssignment.RoleDefinitionBindings.Add(roleDefintion);
listItem.RoleAssignments.Add(roleAssignment);
listItem.Update();
i++;
jaik

Invoice created via SUS having error -The template item 1 does not exists

Hi All,
We are in SRM6.0 and in our PRD system, we have few invoices created through SUS showing error "The template item 1 does not exist.
These invoices went into "To be corrected" status and when I hit check it gives me above error message. The message itself don't make much sense to me. Please note we can create new invoice in SRM manually and everything works fine.
Appreciate any pointers.
Thanks, Sachin

We have analysed the issue and found we are getting this error because these invoices are missing with "BE_LOG_SYSTEM" field in table BBP_PDBEI and "BE_REFOBJ_TYPE" field is showing "BUS2201 instead of "BUS2012".
Any feedback why we have these difference as compare to good invoices (created directly in SRM).
Thanks, Sachin

Time series does not exist, Error in Source System

Hi friends,
I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
Error Message : Time series does not exist,
Error in Source System
I have pasted the ststus message below
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks,
YJ

Hi,
You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
Few notes are:
528028,542946,367951,391403,362386.
With rgds,
Anil Kumar Sharma .P

10gLiteR3 publishing ORA-00942: table or view does not exist error

Hi All,
I am encountering table or view does not exist error while publishing using the api.
Below is the code:
try {
consolidatorManager.openConnection("MOBILEADMIN","PASSWORD", ADMIN_JDBC_URL);
mobileResourceManager = new MobileResourceManager("MOBILEADMIN","PASSWORD",ADMIN_JDBC_URL);
consolidatorManager.createPublicationItem(EXT_CONN, "RMT_TEST_TABLE" , "MOBILEADMIN","RMT_TEST_TABLE", "F", "SELECT * FROM MOBILEADMIN.RMT_TEST_TABLE", null, null);
consolidatorManager.addPublicationItem(mobileResourceManager.getPublication("/mobileApp"),"RMT_TEST_TABLE",null, null, "S", null, null);
} catch (Exception e) {
e.printStackTrace();
When I execute the above code it does not throw any exceptions but I see the below error in err.log. I,U,D triggers are getting created on the remote table, CMP, CFM, CVR,CLG tables are also created, I also see primary key for this table in VPKS. Publishing seems to be fine but I see the below error in err.log.
java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:651)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2117)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2331)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:422)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:366)
     at oracle.lite.sync.Subscription.getVirtualTablePrimaryKey(Subscription.java:7522)
     at oracle.lite.sync.Subscription.getTablePrimaryKey(Subscription.java:7365)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2334)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2157)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2129)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2108)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2093)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2079)
     at oracle.lite.sync.ConsolidatorManager.createPublicationItem(ConsolidatorManager.java:1253)
I am not able to figure out what table it is looking for. Any ideas why this is happening?

check the MGP compose process, is it also showing the error?
If it is them at some point in 10.2 Oracle introduced a 'feature' (ie: bug) that causes problems to the housekeeping routines when new versions of publication items are published
In 10.0 and early 10.2 when making changes to publication items VIEWS called CPV$.. were created to log the column list for each version of a publication item, and check if you are making changes when you publish. In the case of old versions, once all clients have synchronised and been moved to the latest version it tries to delete this view.
at some point the publish started creating TABLES instead of views (but using the same naming convention ie: CPV$..). This works fine as far as the logging of changes and old column lists, but the housekeeping called at the end of the publish and GP process still trieds to do a DROP VIEW and this causes the error.
The only way of clearing this i have found is to look at the log file to get the name of the object that it is trying to drop, set up a view script to create a dummy view with the list of columns in the table, drop the table and then create the view. It then gets dropped on the next MGP cycle and the error goes away
If the error is not showing up in the MGP process, only in the publish, and your changes appear to be publishing OK, then the problem is likely to be with a snapshot definition AFTER the change you have made - real pain to identify on re-publish - possibly missing schema name in the snapshot definition

Item 000010 does not exist - Error Message V1331 in VA41

Similar Messages

Maybe you are looking for