Item Changed Status on a block

Hi:
I want to run when-validate only if an item status has changed to 'Modify'. How can I get the status. Is there any other better way to do this. Any Suggestions?
Thanks in Advance
Alok

Hello !
In Oracle Forms, you can check form status by (:SYSTEM.FORM_STATUS) and block status by (:SYSTEM.BLOCK_STATUS) from CHANGED to QUERY status .
example :
IF :SYSTEM.FORM_STATUS = 'CHANGED' THEN
-- Display a message or ALERT box.
MESSAGE ('Do you wish to save your changes?');
END IF;
Regards
Omar

Similar Messages

  • Email send to users and sharepoint group when list item changes status

    I am very new to designer to write workflow. I hope you guys will help to figured it out. I have list which has one dropdown item called "App Change Request Status". Dropdown items are "Submitted,Assigned, Estimated".
    When "Submitted" Selected Email needs to send below users.
    Send to SharePoint Group "IT Senior Mangers"
    When "Assigned" Selected Email needs to send below users
    Send to Project Manger - (Person or Group) - it is column in the list
    When "Estimated" Selected Email needs to send below users
    Send to SharePoint Group "Data Gov Group" When "Type Of Change" is "New Project"
    Send to item created by
    Please provide me steps to do this in share point designer. I am using SharePoint 2013 foundation.
    ItsMeSri SP 2013 Foundation

    hi, 
    use the below link to create workflow in sharepoint designer 2013 
    http://msdn.microsoft.com/en-us/library/office/jj554671(v=office.15).aspx
    Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

  • Change open item management status

    Hi,
    We found the some GL accounts are maintained with no open item management status and already have postings in those GL accounts.
    No, our client is aksing us to rectify the all this kind of accounts with no open item management.
    Earlier we rectified this problem with zRFSEPA02.
    But it is creating some problems in their reporting. Now my client is asking us to suggest a solution other than zRFSEPA02.
    Because there are around hundres of accounts in no.of company codes say around more than 30 company codes.
    Please let me, is there any solution to resolve this issue.
    Thanks in advance
    Thanks& Regards,
    PRASAD

    1.  Out of 4 G/L, we have managed to change 2 of the G/Ls to open item using ZRFSEPA02.
    2.  While other 2 encounter error "Line item total does not tally with account balance."
         - Message no. FH099
    3.  Basically we have make the account zero and blocked these G/Ls for posting before executing program
         ZRFSEPA02 and still can't find out what went wrong since the steps are the same.
    4.  Anyhow we can now tick all 4 G/Ls to Open Item Management with the successful G/Ls showing
         their line item as open item in FBL3N while those failed G/Ls currently showing line item as posted in the similar report.
    Running SAP 4.7
    Message was edited by: Mohd Shazaly A Jamil
    We have successfully change to open item management for another set of G/Ls and the steps are below:-
    (a)  make sure all the balances were carried forward for all related ledgers which in our case we have 2, 00 and S
    (b)  ensure G/L account zero for all doc crcy, local crcy1, local crcy2 and local crcy3 (transfer for temp. to conversion purpose G/L)
    (c)  blocked all the related G/Ls
    (d)  execute ZRFSEPA02 for all the related G/Ls
    (e)  unblock the G/Ls from step (c)
    (f)  reverse entries from step (b)

  • Updating a value of a text item in a multi record block based on a change

    Hi,
    I need to change the value of a text item in a multi record block based on a change to another item's value in the same block.
    Suppose there's a text item in a multi record block called dt1 which is of type date, which is changed in a particular record. I want to change the values of the another item in the same multi record block, for all other records by running a loop through all the records in multi record block. I dont want to do it on the press of a button, it should do automatically on change. Help me resolve this issue.

    Hi,
    I need to change the value of a text item in a multi record block based on a change to another item's value in the same block.
    Suppose there's a text item in a multi record block called dt1 which is of type date, which is changed in a particular record. I want to change the values of the another item in the same multi record block, for all other records by running a loop through all the records in multi record block. I dont want to do it on the press of a button, it should do automatically on change. Help me resolve this issue.

  • Non DB item in a base table block, gives frm-40202 error.

    Dear All,
    We are using forms6i as a front end. To simulate the error, consider the following example.
    1.Create a multirecord emp block.
    2.Add a non database item in the base table block.
    3.Assign any value to the non database item, in the when new record instance trigger.
    4.When i say F7 or F8, my block asking me like, field must be entered. Which means, my record status changed to Insert. But there is no change in base table record, since i modified only in the non base table item.
    Please validate, whether i am doing anything wrong in my technique.
    Regards,
    Balaji

    If you have a value to be used as the default value then you can use "Initial Value" property in the item level for the Non Database Item. If you do this it wont give you any problem during the query. If you create a new record then the value which you have put as the default will come automatically.

  • Status of the block and the form

    Hi!!!
    Whenever i try to create record by pressing key-F6 the status of the form and block is changed. Could you please tell ,what status are the block and form are changed to, in create record event?

    E.g. if there are default values - see "About default values for items in new records" in the on line help.
    Also if the values are assigned to an items in triggers - Pre-Record, When-New-Record-Instance ...

  • Expense (PR05) - Line item change report

    Hi:
    We are looking for a report on the changes made in the trip line items after the trip was submitted, approved, transferred to FI (at every status).
    Basically if a consultant has submitted an expense and is approved by the manager, Then if consultant is opening that trip again and making the changes in the line item (change in cost object, amount etc) or adding a new line, we need  a report which tells when was the change made, what was the change etc.
    With the custom program, we are able to get the trip status history but not the line item details (change).
    Any suggestions.

    It tells the status of the trip but doesn't tell me what change is made.
    For example:
    If the original trip had one line for Airfare (say 1000) which was approved and transferred.
    Later on this was adjusted to Airfare (say 1010) which was again approved.
    We want to know amount was changed from 1000 to 1010 on this date. Similarly to cost assignment. Any field which has accounting effect.
    Basically our Accounts payable needs to know if they should settle the expenses without waiting for the receipts at month end (in the scenario where cost object is changed later but amount is same, so there is no revised receipt from consultant. They can just settle it again)
    Some kind of report which tells when and what change was made (at item level).
    Thanks.
    Rahul

  • URGENT: Changing status at Header level in Service Ticket in Webclient

    Hi All
    Please reply ASAP.......
    I am changing status for service ticket in webclient at Header level.
    But at item level system status is not changing.
    Is there any config in CRM where user status or system status is copied from header to item level
    Basically need is to trigger item status when header status is trigerred....
    Can anyone help me in resolving this issue.
    Regards
    Pankaj Vispute

    Thanks Bhanu,
    I solved my problem with your answer.
    Thanks,
    Praveen

  • How to restrict user to change status.

    Dear All,
    we want to restrict users to change the status from set to assign to released status.
    is there any authorization object to restirct user to change status?
    i was trying with object CPRO_DPO Create Project Definition with activity 43 release ,but unable to do so.
    Please do need ful
    Regards
    Ravindra

    Hi Ravi,
    probably you need to create user status profile.
    Use TA BS02 to create status profile
    here you have to add authorization key which needs to be defined in BS52
    use b_user_stat auth object to give profiles in custom roles in PFCG
    Thus you can block access to change status
    Niranjan
    Let me know if it helps
    Points welcome
    Thanks Mathias
    Edited by: Niranjan Dandekar on Apr 2, 2009 1:21 PM
    Edited by: Niranjan Dandekar on Apr 2, 2009 1:21 PM

  • Reset order item's status

    Hi,
    I have a before_change event for order item status. When user change status to suspended, function module assigned to event is called and a popup will appear asking user to enter reason for suspend. If user cancels the popup we want to reset the status back to original. What function module can I use?
    Rgds.

    Hello,
    In your before_change FM, you have to raise the abort exception if you want to avoid the status change.
    Check standard event FM like CRM_STATUS_BEFORE_REJECT_EC.
    Regards,
    Frédéric

  • How to change status of Campaign

    Hi
    I have writtend following code to change the status of the campaign
    Data : lit_status_comt TYPE crmt_status_comt,
    wa_status_comt LIKE LINE OF lit_status_comt,
    lit_field_names TYPE crmt_input_field_names_tab,
    wa_input_field_names LIKE LINE OF lit_field_names.
    CLEAR wa_status_comt.
    wa_status_comt-ref_guid = 'GUID of the HEADER or Line Item of the Order'.
    wa_status_comt-ref_kind = 'Pass 'A' for Header/ 'B' for Item'.
    wa_status_comt-status = 'E0035'. " Pass the user status
    wa_status_comt-user_stat_proc = 'ZCONTR_H' " Value for the User Status Profile.
    wa_status_comt-activate = 'X'.
    INSERT wa_status_comt INTO TABLE lit_status_comt.
    wa_input_field_names-fieldname = 'ACTIVATE'.
    INSERT wa_input_field_names INTO TABLE lit_field_names.
    IF lit_status_comt IS NOT INITIAL.
    CALL FUNCTION 'CRM_STATUS_MAINTAIN_OW'
    EXPORTING
    it_status_com = lit_status_comt
    CHANGING
    ct_input_field_names = lit_field_names
    EXCEPTIONS
    not_allowed = 1
    error_occurred = 2
    warning_occurred = 3
    OTHERS = 4.
    ENDIF.
    But status is not changing in CRM_JEST table. How to change the status in CRM_JEST.
    I want to change the CREATED status on RELEASED status..
    Could you please help me inthis.
    Thanks & Regards
    Sowmya

    Sowmya,
    you do not need to build custom code. There's the program CRM_MKTPL_COND_IF_R001 that does exactly this work.
    Regards
    C

  • In Firefox 2.0+ you can go to Advanced JavaScript Settings and check a box to allow scripts to change status bar text. How do I do this is Firefox 10.0.1?

    In Firefox 2.0+ you can go to Advanced JavaScript Settings and check a box to allow scripts to change status bar text. How do I do this is Firefox 10.0.1?

    Two items in the Advanced JavaScript window were removed as of the Firefox 4.0 version, but they are still available thru about:config .
    Type '''about:config''' in the URL bar and hit Enter. <br />
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = '''dom.disable_window_status_change''' = double-click to toggle to '''false''' to allow websites to mess with status text.

  • Item property does not overrides block property ?

    I have CURRENT RECORD VISUAL ATTRIBUTE set to SOMETHING for block A. i also have CURRENT RECORD VISUAL ATTRIBUTE for item AA in block A ( A.AA) . but when i run form, it looks like item AA's CURRENT RECORD VISUAL ATTRIBUTE is not in effect ?
    usually item's property should override block property. but it'snot happening here.. can anyone figure out??

    Set_Item_Instance_Property is a more specific control, so Set_Item_Property logically should not change it.
    Create two package variables defined in a package specification in the form, trig_item and trig_record.
    Change your WBP trigger:
    Set_Item_Instance_Property(Pkg1.trig_item,Pkg1.trig_record, VISUAL_ATTRIBUTE,'');
    Pkg1.trig_item := :System.trigger_item;
    Pkg1.trig_record := :system.trigger_record;
    Set_Item_Instance_Property(Pkg1.trig_item,Pkg1.trig_record, VISUAL_ATTRIBUTE,'SET');
    Actually, a When-New-Item-Instance trigger might be better than the WBP trigger, so the same action would occur no matter how the cursor is moved around your form (Using Enter or Tab, or shift-Tab, or scrolling).

  • Make content item's status to expire after crossing expiry date in WLP repo

    Can anybody please tell me, how make the status of content to expired after crossing its expiry date(content attribute) programmatically.
    Thanks a ton in advance.

    Are you using Library Services and the WLP Repository? If so, are you looking to automatically move content Nodes to the Retired status when the expiry date is reached? If the answers to both of these are yes, then you'll need to write some type of job that runs on some frequency and queries for Nodes where the expiration/retired date is reached. Of course, you'll need to have a Property on each content Type that holds the scheduled retirement date. Your job would then need to query where the retirement date has been reached and do a checkout, change status to retired, and then check the Node back in. Note that the retirement would only occur as often as your job ran, so if the retirement is time senstivie (ie. to the minute or second), then you'll also need to filter your content searches that are used in your application to filter out items that have reached the expiration date (ex. Type.ExpirationProperty > now).
    If you're not using Library Services, then you would just include the expiration date test (Type.ExpirationProperty > now) in each query/display to ensure that you are not displaying content that has reached maturity.
    Brad

  • Is the Sales Order Item User Status available in user exit MV45AFZZ

    Hello,
    Does anyone know if a sales order line item user status is available within user exit MV45AFZZ (USEREXIT_SAVE_DOCUMENT)?
    I need to send an email when the status changes from one specific value to another specific value but I don't seem to have access to what the latest value is in this user exit.
    I have found a table XTVSTAT which cntains some user status' but it's not clear which status maps to which line item.
    If anyone has any suggestion please let me know.
    Thanks,
    Ruby

    Hi,
    I do need to access the values as I need to check for a specific change to the user status from value A to value B.
    I have already tried debugging the user exit and searching through the available variables but the status information doesn't seem to be available.
    I guess I will have to try the output determination route. Can you explain this in a bit more detail please.
    Thanks,
    Ruby

Maybe you are looking for