ITunes will only play one song at a time, I can't select an album or artist and have it keep playing the next song.

I just can't figure out how to keep itunes going. It plays one song at a time and will not go on to the next. Do I need to change a setting or something?

At a guess you've somehow managed to uncheck the entire library. Select the Songs view, the CTRL+click an empty checkbox. All boxes should become checked. If you don't see the checkboxes use Edit > Preferences to enable them.
tt2

Similar Messages

Laserjet 2100 will only print one page at a time.

I recently acquired a second hand Laserjet 2100 Series. Installation was fine but it will only print one page at a time, I have to keep pressing the 'Go' button, which is very frustrating. The manual tells me that it is in 'Manual' mode but not how to change it. Can anyone help, please? O/S Windows 7. Thank you.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2

When I play my music from my playlist it will not advance to the next song, it just repeats the song over. I have to advance to the next song manually.

When I am playing my music it will not advance to the next song, it just keeps repeating the song. The only way to go to the next song is to do it manually. It just started this after the last update. How do I fix it, hard to listen to at the gym.

Check the song and see if repeat is activated. Down in the bottom left corner is repeat when the music is running. It would have a colored box around it if it is active. It would either read Repeat Song, or Repeat Playlist.

Appleworks will only print one page at a time, please help!

hi there ~
no matter how many times I ask the printer to print ALL pages, it will only print one at a time, so I have to manually print page 18, 17, etc....
Could this be because the pages are arranged left to right? that would seem strange.
also, I cannot find a function to re-arrange the pages. for example, i want to re-organize to make page 18 at the front as page 1. I just don't get it though I've searched the program.
THANKS SO MUCH!

Hi td,
Welcome to AppleDiscussions and the AppleWorks forum.
"no matter how many times I ask the printer to print ALL pages, it will only print one at a time, so I have to manually print page 18, 17, etc...."
My memory says the same as Yvan's.
If the printer dialogue has a checkbox labeled "Collate", make sure the box is checked, even if you are printing a single copy. If memory serves, this suggestion was made in connection with HP printers.
A second possible solution is to specify the page range when printing this document (or others that exhibit this problem). (eg. for a 25 page document specify printing From page 1 To page 25.) You might try specifying p. 1 to p. 99 for any document under 100 pages, although I don't know what effect this would have for a 5 page doc.
regards,
Barry

Next Song Button - Stops the song and does not advance to the next song

I just loaded 8.0.2.20. Now I cannot use the ">>" next song button. I've tried many playlists and rebooted the system - no luck.
If song 1 in my playlist is playing and I click on the next song button, song 1 stops, song 1 remains highlighted in the main display area (list view).

I just figured this out. All of my songs were "unchecked" after I was working on setting up iTunes for multiple ipods. Now that they are all check, the "forward" or "Next" button works fine.

I do not want to upgrade to 7.0, I am attending online college and the upgraded version does not work with my school. How can I stop Firefox from upgrading? I have to keep uninstalling the upgrade and installing the old one.

How can I stop Firefox from automatically upgrading? My on-line college is not compatible with the upgraded version. I have to keep uninstalling the new one and reinstalling the old one.

It's not a good idea to allow websites to redirect to another site until you know for sure the original site is trustworthy.
But if you still want to do it (again not a good idea).
Tools>Options>Advanced>General - In Accessibility, uncheck "warn me when web sites try to redirect..." option.

My songs in my Music folder are stuck on repeat, how do I get them to advance to the next song?

How do I get the songs in my music file to advance to the next song? All they do now is repeat the same song unless I advance it myself.

HT201322 Is it possible to buy a TV box set on iTunes but only download one season at a time

I cannot afford to use up all the space it would take to download four seasons of a tv box set. Is there a way I can purchase the box set but only store locally one season at a time?

I misunderstood you. I thought you had a link to a mini-DVI to HDMI cable. That's why I asked for the link.
You can use the adapter you linked to and get a DVI to HDMI cable locally and it will work for you.
Sorry about the confusion on my part.

Reconnect Media - Will only do one file at a time. (all files is checked)

I found one Google search that said this may be a bug... http://forums.creativecow.net/thread/8/1047891 and it's really bothering me since I have about 500 more media files to connect.
When I select multiple files in my Project File Browser, right click, hit Reconnect Media... It opens the Reconnect Files window. Then I hit "Locate", navigate to the folder holding the files (Reconnect All files in Relative Path is checked), select the file, confirm, then hit connect... Only one file (the first one selected) reconnects.
It's worse than that for me, now the file is Connected in my Project File browser, but it still doesn't reconnect in my sequences. So now I have to go in the sequence and right click on the individual clips, and manually reconnect those as well.
At this point it take 6 plus clicks per file missing, times two because I have to reconnect these clips in the sequences as well... times 500 because that's how many offline files I have.
My lord, I've already done this to half of the project, I can't do it any more... where am I going wrong or is this a bug? If so, please tell me there is a workaround.
The file I'm working in is a feature film, so it's huge... I can't start over at this point.
Thanks for your time!
-Monty

The only multiple files it will reconnect are the ones that are already connected.
I hope I figured it out but need more advice. It may be that the files that won't connect do not have a visible file extension ".mov". How can I get these files to shoe ".mov" at the end of their names without manually renaming them all?
And the reason this is happening is I was using reference files to edit a movie, now I've been given new hard drives with the final uncompressed footage but same file names for each clip... plus the new hard drives I'm using have different names.
Thanks for your time!
-Monty

Excel will only print one page at a time

At work, we use Excel to track orders. I have a multi-page workbook that has linked pages. Last week, I could print fine, but this week I am only able to print the last page of a sheet. I saw in another forum: http://discussions.apple.com/thread.jspa?messageID=696138 person who had a similar problem, but only when trying to print to a PDF. I am able to preview and print to a PDF without problems. I have updated my OS and printer drivers, and installed all available updates to Office (I’m using version X). I think it is pertinent to note that no one else in my office is able to print these documents normally.
Can anyone think of a solution short of completely rebuilding the workbook? In the past, saving the file as an Excel v.4 workbook and then reconverting it to the more current file solved the problem, but now if I try to do that, excel crashes.
Thanks!

Well, I rebuilt the entire workbook... that was a few months ago and so far, the problem hasn't resurfaced. It really wasn't fun to do, but whatever glitch there was in the file, I eliminated it.
I think I should mention that I am using Office v.X, NOT Office 2004. I got a new Intel iMac this week and yesterday when I opened up my files, it opened up the test drive (a JOKE of a program if you ask me) Anyway, some of the very minor issues I had with Office v.X were solved in the 2004 version. (When opening up large multi worksheet files without Excel being already opened, the tabs have white text) Anyway, I am still going to wait for the universal version to come out, but it seems that the newer versions may have fewer glitches (as is to be expected)
At any rate, best of luck to you!

HT201287 Can I set up a group message and have myself to be the only one to get responses

I often send group messages about where the group will be going to dinner, or what time an event will be held. I am the only one who needs to get responses to the group message, but everyone in the group gets all responses which is aggravating to most of the group members. Is there a way to send a group message, with me being the only one to receive responses?

Not through the built in Messages app. There may be other group messaging apps that would allow you to do that. However, everyone you message would need to have he same app installed.

Struggling with itunes, will only open after several attempts. When I attach my ipod it starts to sync and shows step 1 of 5 but only gets so far and then stops. I left the ipod connected

It won't even let me closedown itunes, just freezes and I end up having to switch off my laptop and restart. It's only recently that it started doing this and I've just bought an ipad so I'd like to get the problem sorted as I can't sync that until I do.

Hi,
I had a similar problem, all you can do at present to rectify this is to grab your playlist or new created playlist or song from the main library or playlist and drop it into the ipod tab under devices and it will auto sync the changes or songs. Hope this helps.
There seems to be a problem with the syncing of itunes 11 (mine is 11.0.5) when you just use the normal sync method. the above should work and has worked for me when transfering a playlist straight into the ipod it automatically syncs.
Regards.
Nick

Encore CS5 will Only Burn One DVD At A Time

Hello All , I am having a problem that I didn't have with CS4 ,If I set CS5 to burn more than one DVD it shows a hardware error after the first one , If I set CS5 to burn one DVD it works every time I only burn at 8X .This is not a major problem because it doesn't take much longer to burn them one at a time
but it would be nice to know why .
Regards
Kevin

Thank's for your suggestion but I have always set CS4 to burn say 10 DVDs and just change the media when prompted (only 10 days ago) in CS5 this doesn't work only the first one will burn , I am sure there is nothing wrong with my hardware is works flawlessly with all other software.

HP LaserJet 2035n printer will only print one page at a time

Recently I have installed the HP LaserJet P2035n with Windows XP. While taking printouts, its not printing more than one page. Already I have checked PCL setting for Manual feed as OFF and paper settings as A4. Pls help.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

ITunes will only play one song at a time, I can't select an album or artist and have it keep playing the next song.

Similar Messages

Maybe you are looking for