IView fail to load on internet

Hi,
We have a transactional iview published on the portal to access through internet. This application is accessed by several people but few has problem accessing it. When they login to portal every thing except iview will load. Is it browser setting problem? please advice.
Thanks,
Ravi

Ravi,
its difficult to pin point what might be the cause here. Seems its browser based only as its working for some users and not for some. You can specifically check the security setting of the errorneous user's browser and match it with others for whom its working. Check IE -> Tools -> Internet Options -> Security -> Internet -> Custom Level -> User Authentication -> Logon - see if there is any diference here. If the portal is added as a Trusted Site of Intranet Site then instead of checking Security -> Internet checks the setting from Security-> Trusted Sites or Security -> Intranet.
Regards,
Shubhadip

Similar Messages

Applet failed to load in Internet Explorer when using JRE 1.5 update 5

I have downloaded JRE 1.5 Update 5 and checked the relevant checkbox in Internet Explorer Advanced tab to use JRE 1.5 for applets. Did the same in Java Control Panel. However none of the applets seem to load.
For example I went to this site:
http://java.com/en/download/help/testvm.xml
The applet didn't load and I got the following error in my Sun Java Console :
load: class JavaVersionDisplayApplet.class not found.
java.lang.ClassNotFoundException: JavaVersionDisplayApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more

And it's the same behaviour in JRE 1.5 update 8 as well.

Internet appears connected but pages fail to load after 3-5 minutes! HELP!

I purchased my Macbook three weeks ago and it immediately found my network and connected. A few days later my computer failed to load internet pages (both in firefox and safari). The connection would not disconnect, or seem to slow. I diagnosed and found no problems. To get it to work for small amounts of time I turn off airport and then turn it back on and get a few minutes before I get "Problem Loading Page".
I have updated the firmware in my router. I use a D-Link Router WBR-1310 and a D-Link Cable Modem DCM-202. I have called my cable provider, Comcast, and they tested the connection saying it was strong. I connected directly to the modem and it never failed to stop loading pages the full 20 minutes I was connected.
My computer has no problem connecting to other connections: The Library, neighbors, my parents' home. There are no time outs and it automatically connects through Airport, no problem.
I have called D-Link about the router. They're a bit confusing in troubleshooting the problem. They told me to connect my Ethernet cable to the computer and manually put in IP address, subnet mask, router address, and name server address. First, I don't know where to find any of that except for the IP address. Secondly, do they expect me to connect and leave the ethernet cable in my computer?
Have there been any problems with Macs and this router? What am I doing wrong and has D-Link given me good steps to take? My experience with them hasn't been so great so I'm skeptical. All of this is very upsetting, I can't enjoy my new Macbook at home.

FrankInColorado wrote:
Yes I had read about this. The point is, especially with something such as wireless, it has to inter-operate with everyone else out there. You would think Apple would do some testing before going to some "recommended" standard that obviously is not widely used in the real world. To someone who just bought a new MacBook, it doesn't matter that Apple is using the "new" recommended way. They just want to be able to connect everywhere they go.
No, networking is a world of standards and recommended procedures. This all used to be a lot easier when there were actual engineers who understood the RFCs running most networks.
You seem to think Apple just throws software over the wall. If that's true, you should swing by Cupertino some time and see if you can meet with a member of their software test groups; I'm sure they'd love to know that you think they don't do anything.
Or perhaps Apple is supposed to test their software with every ISP on the planet first.
And how many people posting in these forums have said when they turn Airport off and back on, then things work again for a while. If the issues are on the other side, why would that make any difference?
Did I or anyone else here say that changing to OpenDNS' servers would solve every issue with every person in each and every one of these threads?
But there have been many cases where switching to OpenDNS' servers does solve people's network delay issues. Hmmm, I guess Apple's cluelessness doesn't apply in those cases.
Come on. He connected directly to the modem and was loading Web pages for 20 minutes without any problem. He goes back to using Airport and the problem reappears. And you think it's reasonable to assume it was just a coincidence that the supposed DNS issue went away while he was connected to the modem and reappeared when he went back to Airport?
It depends now, doesn't it, as I just said.
Perhaps he tried "surfing to a few sites" while connected directly, and when that worked he went back to AirPort. Did he try going to the same sites? Different ones? We don't know.
In fact, even if he did visit the same sites, that wouldn't tell us anything either way as the DNS resolutions for those sites would have been cached when he was connected to the wired network.
This is the same thing that has happened to me since upgrading to Leopard. My wireless started going bad after some minutes of accessing Web sites. If I rebooted the machine, it would be fine again for a while. I finally just turned Airport off and plugged in an Ethernet cable. I have not had any trouble with accessing Web sites since - same ISP (Comcast), same DNS servers.
Tell me there is no Airport issue.
I never said there weren't issues. No one did. Except you implied I did.
Your approach to troubleshooting seems to be "Ah, Apple's software is broken, why bother."
1) There are many people whose problems have been solved by switching to OpenDNS' servers. That's fact.
2) There are many ISPs who have broken DNS servers. That's also fact.
3) Comcast has a variety of DNS servers spread across the country, so your results in Colorado may differ from those of a Comcast subscriber in a different state. Fact again.
4) You asked for reasons, I gave them, you don't like them. Obviously I must be an Apple shill. Funny, I'll have to ask why I haven't received a paycheck from Cupertino. Ever.
I understand your frustrations if AirPort isn't working for you, but don't turn around and drop into troubleshooting threads and tell people why suggestions we're making can't possibly address their issues just because they haven't solved your particular issue.
That would be just as silly as me assuming that because I haven't seen an AirPort drop since 2007, all of those posting in threads here are simply delusional or incompetent.
The only way to find out what's wrong in each case is to be methodical, and step one in diagnosing network delays is to see if DNS is at fault.
If it is, great, problem solved. If not, on to step two of a nearly infinite sequence.
One step at a time.

How to resolve this: Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, using the older version, or using basic HTML mode.

Keep getting this message while using Gmail "Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, using the older version, or using basic HTML mode. "
I have to use the older version of gmail for it to work properly.

now i cant even send emails out of gmail, except when using the older version.

Some Gmail features have failed to load due to an Internet connectivity problem.

This error message comes up both using Firefox and Chrome when using G mail. Also if it works at all,
switching from compose to draft just takes very long or keeps working.
No problem with G mail using Internet Explorer or Safari.
I have used Firefox for many years & want to go back when I can solve this Vexing problem.

Thank you for your help.
I reset Firefox, re started and wanted to answer using G mail with Firefox,
and the same error message comes up.. When it does the screan gets
very lite with the error message on top.
'''''Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, or using the basic HTML version. Learn More.'''''
I am now using Explorer to send this!
Sy

FireFox images not loading in local folders (firebug error-Failed to load given URL)

I am having difficulty when developing websites in local folders (Windows7 computer). The webpages I make are showing images in IE9 & Chrome but not FireFox (nor Safari nor Opera).
In FireFox I get Firebug "Failed to load given URL" prompt.
I am using html5 & external linked css stylesheet & the html/html5 & css code validates.
I have tried using rel path ie images/image.gif & absolute path references ie C:/RPD_Programming/RPD WEB/amwcsnew/index.html
and have tried using % to eliminate whitespace in references but I cannot get FireFox to display images!!
This has been a problem for me for around 2 weeks now & is very frustrating. Some website code/templates I have downloaded from the internet display the websites properly (ie load images fine) when I open them locally in FireFox. Why does my code not allow the images to load in FireFox (paths/permissions/other issue??). How can I fix this?
Here is example css & html5 not displaying images from local directory in FireFox (fine in IE9 & Chrome):
style.css
/* CSS Document */
/*Basic Reset*/
margin:0;
padding:0;
html{
/* HTML5 display-role reset for older browsers */
article, aside, details, figcaption, figure,
footer, header, hgroup, menu, nav, section {
display: block;
body{
width:1200px;
margin:0 auto;
header{
height:450px;
background:url("C:/RPD_Programming/RPD WEB/amwcsnew/images/header.gif");
background-repeat:no-repeat;
#mid{height:750px;
background:url('C:/RPD_Programming/RPD_WEB/amwcsnew/images/mid.gif')no-repeat;
footer{height:286px;
background:url('C:/RPD_Programming/RPD WEB/amwcsnew/images/footer.gif')no-repeat;
index.html
<!doctype html>



<html lang="en" class="no-js">
<head>

<meta charset="utf-8">
<title>amwcs-new</title>
<meta name="description" content="amwcs">
<meta name="author" content="rpd">


<link rel="shortcut icon" href="/favicon.ico">

<link rel="apple-touch-icon" href="/apple-touch-icon.png">



<link rel="stylesheet" href="css/style.css?v=2">


<script src="js/modernizr-1.6.min.js"></script>


</head>


<body>




<header>

<hgroup>
<h1>amwcs</h1>
<h2>tagline</h2>
</hgroup>

<nav>
<ul>
<li><a href="#">Home</a></li>
<li><a href="#">About</a></li>
<li><a href="#">Services</a></li>
<li><a href="#">Contact</a></li>
</ul>
</nav>
</header>

<div id="mid">

<section class="hs1">


<p>Some content...</p>

<h2>Demonstrating EM and STRONG</h2>

<p><strong>This text will have more importance (SEO-wise and contextually)</strong></p>

<p><b>This text has visual importance but has no contextual or SEO importance</b></p>

<p>This is a <em>very</em> colloquial expression.</p>


</section>

<section class="hs2">
<h1>This is another section</h1>
<p>This is some dummy content</p>
</section>
</div>



<footer >
<p>copyright © year</p>
</footer>


<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js"></script>
<script>!window.jQuery && document.write(unescape('%3Cscript src="js/jquery-1.4.4.min.js"%3E%3C/script%3E'))</script>


<script src="js/general.js"></script>


<script>
var _gaq = [['_setAccount', 'UA-XXXXX-X'], ['_trackPageview']];
(function(d, t) {
var g = d.createElement(t),
s = d.getElementsByTagName(t)[0];
g.async = true;
g.src = ('https:' == location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
s.parentNode.insertBefore(g, s);
})(document, 'script');
</script>
</body>
</html>
I am most grateful for help & look forward to replies & fixing this-thanks
NB
Is there a FireFox guide/manual in pdf format available anywhere? I have not found one yet & a FireFox reference might be useful!

You need to use file:// as the protocol instead of C:/. The latter may never work (C:\ might).
Where is the main HTML located ?
Easiest if to store the images in a sub folder of the location because you can't go back via ../ beyond that root location for security reasons.
See:
*http://kb.mozillazine.org/Links_to_local_pages_do_not_work

Websites failing to load, games lag, but connectio...

Hello,
Hoping someone here might be able to help me out with this one. For the past few days now some web pages havbe been failing to load and games are occasionally disconnecting. However the entire time our connection seems to be remaining stable and connected.
It appears to happen for no reason, and it only affects some websites. bbc.co.uk, google search, and these Broadband forums. Other sites will load perfectly fine, including both the BT speedtest and the ookla speedtest (both of which show our internet speed & ping to be perfectly fine.
I'm at a loss as to what could be causing this issue. I've set the DNS settings in my network adaptor to google DNS to see if that makes a difference, but the fact it affects online gaming in the form of lag makes me thing this is not the case.
I'm hoping to try a traceroute the next time the issue happens, and hopefully have it complete. The problem is by the time we confirm a non-working site and get part way through the traceroute the problem seems to fix itself so we cannot get confirmation of where the issue is coming from.
I'm wondering if anyone else is having similar problems, or has maybe had a similar problem in the past and can suggest any steps or tests I can take to find/remedy this problem?

nothing has been posted here about it have you checked the service status page or the status phone line 08001690199 and see if there is any problems in your area
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Plug-In Failed to Load?

When I try to run the i phone promo piece, I get this message:
The page “Apple - iPhone - A Guided Tour - Medium” attempted to load an Internet plug-in named “QuickTime Plug-In 7.2”, but the plug-in failed to load successfully.
I've already install QuickTime 7.2 two different times, and I get the same result.
So, what do I do?

When I try to run the i phone promo piece, I get this
message:
The page “Apple - iPhone - A Guided Tour - Medium”
attempted to load an Internet plug-in named
“QuickTime Plug-In 7.2”, but the plug-in failed to
load successfully.
I've already install QuickTime 7.2 two different
times, and I get the same result.
So, what do I do?
Go to Macintosh HD>Library>Internet Plug-ins and remove QuickTime Plugin.webplugin
Make sure you get the right one, ie the one with .webplugin file extension
But don't trash it yet!
This worked for me.
iMac G4 Mac OS X (10.4.10)
iMac G4 Mac OS X (10.4.10)

Solution to "Quicktime Plug-in failed to load" error

My solution to "Plug-in failed to load" error message when attempting to watch demo movie on Apple website (and others):
I found two Quick-time plugin.plugin files in my Internet Plug-ins folder in my
User Library folder. One was version 6.3 and one was version 6.5.2.
Removing the 6.3 version solved the problem. Removing the 6.5.2 version had no effect, so I removed it also.
Never could have solved this one without the help of Woody at Apple!!!!

Why not install version 7?

MacBook Pro won't boot up. read error 0x7 failes to load a number of drivers?

Dear All,
Lately I am having quite a bit of trouble with my Late 2011 MacBook Pro. It seems to be stuck in a vicious circle of boot-ups.
Since a couple of days it is taking ages (like 5 min) to boot up, and today it just doesn't get to te "user-screen" anymore.
I have tried to boot it in safe-mode and tried to enter the repair utility, but those don't seem to work.
When I tried booting it in single-user mode, it told me it had "read error 0x7" and it fails to load a whole number of drives.
When I run a Fysical System Check, it tells me the Macintosh HD can not verified?
What can I possibly do to get back in there again? are all my documents lost?

This may work if the drive is OK. If it's accessible but corrupted try the second procedure.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
And, it neither work consider my original suggestion.

JApplet with JFrame fails to load in browser

I have been making a Java program that runs a JApplet the program operates perfectly in NetBeans (the Java development kit), but when I run it in the browser, it fails to load.
The code is...
import java.awt.*;
import javax.swing.*;
public class CalculatorMain extends javax.swing.JApplet {
private Difficulty difficulty = new Difficulty();
private Troop[] troop = new Troop[7];
private Army army = new Army(troop);
private Calculator calculator = new Calculator(difficulty, army);
private CalculatorListener listener;
public void init(){
JPanel supreme = new JPanel();
supreme.setLayout(new BorderLayout());
for (byte i = 0; i < 7; i++) {troop[i] = new Troop();}
DifficultyPanel diffpanel = new DifficultyPanel(difficulty);
ArmyPanel armypanel = new ArmyPanel(troop);
JButton calbut = new JButton("Calculate Experience");
JLabel xpDisplay = new JLabel(" ");
CalculatorPanel calpanel = new CalculatorPanel(calculator, calbut, xpDisplay);
JFrame frame = new JFrame();
listener = new CalculatorListener(xpDisplay, calculator, diffpanel, armypanel, calpanel);
calbut.addActionListener(listener);
supreme.add(diffpanel, BorderLayout.WEST);
supreme.add(armypanel, BorderLayout.CENTER);
supreme.add(calpanel, BorderLayout.SOUTH);
frame.add(supreme);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
As I said, it does not work in the web browser (which is Internet Explorer 6.0). In the information window I open, the message is...
Java Plug-in 1.5.0_06
Anv�nder JRE-version 1.5.0_06 Java HotSpot(TM) Client VM
java.security.AccessControlException: access denied (java.lang.RuntimePermission exitVM)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkExit(Unknown Source)
     at javax.swing.JFrame.setDefaultCloseOperation(Unknown Source)
     at CalculatorMain.init(CalculatorMain.java:31)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception in thread "thread applet-CalculatorMain.class" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Any idea what might be wrong?

If you look at your error message you'll see...
java.security.AccessControlException: access deniedAh. Problem # 1 caused at
     at CalculatorMain.init(CalculatorMain.java:31)Problem #2
java.lang.NullPointerExceptionat
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)So it says it can't display the init error message. That's ok this should go away when you fix bug #1

Why does this applet (with an audio clip) fail to load in a browser?

Hello Java Experts.
I am able to compile and run the applet in an IDE. The problem lies when I attempt to run the applet through a browser (such as Internet Explorer, Firefox, etc.). The entire applet fails to load (in the browser) when it includes code pertaining to audio clips, but works fine when it does not contain audio clip related code.
Here is a Short, Self Contained, Compilable, Example that illustrates my problem:
import javax.swing.*; // Required libraries
import java.awt.*;
import java.awt.event.*;
import java.applet.*;
public class Music extends JApplet // Music class is a subclass of the JApplet class
    AudioClip music;
    public void init ()
        music = getAudioClip (getCodeBase (), "sample.wav"); // You may use your own audio file
        music.loop();
    public void paint (Graphics g)
        g.setColor (Color.blue);
        g.fillRect (0, 0, 800, 600); // THIS RECTANGLE IS NOT DRAWN (this is my test to see if the applet loads in the browser)
}Please try to run this applet in a browser so that you can point me to my mistake(s).
Thanks for the help in advance.

>
Here is a Short, Self Contained, Compilable, Example that illustrates my problem:>The 'example' part of it, fails to manifest here. Using that exact code, I was able to see a blue rectangle in both AppletViewer and FF. You might try..
1) Configuring the Java Console to open for applets by default - look in it for error messages.
2) Change the name of the WAV to something that definitely +does not exist+ at the code base. (That would most closely replicate my own testing experience - since there is no WAV available here).

Can't boot after update, getting "microcode: failed to load" error

After restarting my computer, it's no longer able to boot, and just prints a continuous stream of errors. The first error it gives is "microcode: failed to load", and I looked it up and found that I should just have to install amd-ucode. Easy enough, except I can't boot. I tried booting into the latest live-usb image, and after connecting to the internet, mounting the partition to /mnt, and running
# arch-chroot /mnt pacman -S amd-ucode
I get the following error
error: amd-ucode: signature from "Allan McRae <[email protected]>" is invalid
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
I'm not very familiar with how chrooting works, especially not arch-chroot, so I don't trust myself to fix the problem without breaking something. I was thinking of just putting the package on a flashdrive and installing it with
# arch-chroot /mnt pacman -U amd-ucode-package-name
Should I do it this way or am I misunderstanding how arch-chroot works?
By the way, this is an issue with my desktop. startx stopped working on my laptop right before I went to use my desktop and rebooted it, so after this issue is fixed I'll be making another thread about my laptop >_> Any help is much appreciated.

Ok, so I managed to install amd-ucode with pacstrap. That got rid of the microcode error, but I'm still getting
/dev/sdc1 contains a filesystem with errors. Forcing check
And then it just repeats the error message
[60.50342] ata5.00: failed command: READ FPDMA QUEUED
[60.51345] ata5.00: cmd 60/<long number that's formatted similarly to a MAC address>/40 tag 0 ncq 131072 in
[60.51743] res 40/<the same number>/40 Emask 0x10 (ATA bus error)
[60.62421] ata5.00: status: { DRDY }
The numbers on the left just keep counting up, but the repeating error message stays mostly the same. What's odd about this error is that the disc it says it has a problem with isn't even the disc with the OS on it. When I have time I'm going to try physically removing /dev/sdc from my computer to see if the error stops.
Oh and there won't be any thread about my laptop issues. Turns out I filled my whole HDD, which was causing startx to fail.

Failed to load IMAP envelope

Hi All,
     I have encountered a problem with JavaMail API, when a message exists on the Mail Server that has �null� for recipient field, JavaMail API throws an Exception when ever we try to retrieve getFrom() method, and also it returns �null� when I was retrieving BCC list.
Is there any thing wrong in this code, Pls. help me?
My Sample code:
import java.util.Properties;
import javax.mail.Folder;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.NoSuchProviderException;
import javax.mail.Session;
import javax.mail.Store;
import javax.mail.internet.InternetAddress;
import javax.mail.Address;
public class InboxSearch
     public static void main(String[] args)
          String           host          =     "XX.X.XXX.XX"; //Host
          int               port          =     143;     //Port No
          String           user          =     "XXXXXX";     //Username
          String          password     =     "XXXXXX"; //Password
          Properties      props          =      new Properties();
          Store          store          =     null;
          Folder          inbox          =     null;
          try
               Session session = Session.getDefaultInstance(props, null);
               store = session.getStore("pop3");
               store.connect(host,user,password);
               inbox = store.getFolder("INBOX");
               inbox.open(Folder. READ_WRITE);
               Message[] inboxMessages = inbox.getMessages();
               for (int counter = 0; inboxMessages!=null && counter <inboxMessages.length; counter ++)
                    Address from[] = inboxMessages[counter].getFrom();
                    //when i was retrieving it throws javax.mail.MessagingException:Failed to load IMAP envelope
                    String retriveBcc=null;
                    Address bcc[] = inboxMessages[counter].getRecipients(Message.RecipientType.BCC);
                    for (int bcccount = 0; bcc != null && bcccount < bcc.length; bcccount++)
                         retriveBcc = retriveBcc + bcc[bcccount];
                         if ((bcccount + 1) < bcc.length)
                              retriveBcc = retriveBcc + ", ";
                         System.out.println("BCC->"+retriveBcc);
                    //retrieving with BCC field it return null so it will throws NullPointerException
          catch (NoSuchProviderException nspe)
               System.err.println("invalid provider name"+ nspe.toString());
          catch (MessagingException me)
               System.err.println("messaging exception"+ me.toString());
          catch(Exception e)
               System.err.println("exception"+ e.toString());
          finally
               try{ if(store!=null){store.close();}}catch(Exception e){}
               try{ if(inbox!=null){inbox.close(true);}}catch(Exception e){}
     }//main end
}//class end
Thanks & Regards
Mohan

Hi All,
Thanks for your replay, Is there any way to find out which column is causing �inserted value too large for column� the problem? I'm trying to insert the data into a table by using Prepared Statement.
Note that I don't require like email_id length>column length then column name=�EMAIL_ID�
Appreciated ur help,
My Sample Code:*
import java.util.*;
import javax.mail.*;
import java.io.*;
import java.sql.*;
public class InboxSearch
     public static void main(String[] args)
          String host = "XX.X.XXX.X"; //Host
          int port = 143; //Port No
          String user = "XXXXXXX"; //Username
          String password = "XXXX"; //Password
          Properties props = new Properties();
          Store store = null;
          Folder inbox = null;
          String msgId[] = null;
          boolean debug = true;
          Connection connection = null;
          PreparedStatement psmt=null;
          try
               Session session = Session.getDefaultInstance(props, null);
               session.setDebug(debug);
               store = session.getStore("imap");
               store.connect(host,user,password);
               inbox = store.getFolder("INBOX");
               inbox.open(Folder. READ_ONLY);
               Message[] inboxMessages = inbox.getMessages();
               String serverId =null;
               Address from[]=null;
               String toAddress = "";
               String ccAddress = "";
               Class.forName("oracle.jdbc.driver.OracleDriver");
               connection = DriverManager.getConnection("jdbc:oracle:thin:@XX.X.XXX.XXX:1521:DEV", "XXXX", "XXXX");
               String query = "INSERT INTO EMAIL_ARCHIVED_MAILS VALUES(?,?,?,?)";
               for (int counter = 10; inboxMessages!=null && counter <15; counter ++)
                    msgId=inboxMessages[counter].getHeader("MESSAGE-ID");
                    if (msgId!=null)
                         psmt = connection.prepareStatement(query);
                         from = inboxMessages[counter].getFrom();
                         Address to[]= inboxMessages[counter].getRecipients(Message.RecipientType.TO);
                              for (int count = 0; to != null && count < to.length; count++)
                                   toAddress = toAddress + to[count];
                                   if ((count + 1) < to.length)
                                        toAddress = toAddress + ", ";
                         Address cc[] = inboxMessages[counter].getRecipients(Message.RecipientType.CC);
                              for (int count = 0; cc != null && count < cc.length; count++)
                                   ccAddress = ccAddress + cc[count];
                                   if ((count + 1) < cc.length)
                                        ccAddress = ccAddress + ", ";
                         psmt.setString(1, msgId.toString());
                         if (from[0].toString()!=null)
                              psmt.setString(2,from[0].toString().toUpperCase());
                         }else
                              psmt.setNull(2, Types.VARCHAR);
                         if (toAddress!="")
                              psmt.setString(3,toAddress);
                         }else
                              psmt.setNull(3, Types.VARCHAR);
                         if (ccAddress!="")
                              psmt.setString(4,ccAddress);
                         }else
                              psmt.setNull(4, Types.VARCHAR);
                         psmt.execute();
                         System.out.println("counter-->"+counter);
                    }else
                         System.out.println(�No MESSAGE-ID�);
          catch (NoSuchProviderException nspe)
               System.err.println("invalid provider name"+ nspe.toString());
          catch (MessagingException me)
               System.err.println("messaging exception"+ me.toString());
          catch(Exception e)
               System.err.println("exception"+ e.toString());
          finally
               try{ if(psmt!=null) psmt.close();}catch (Exception e){}
               try{ if(connection!=null) connection.close();}catch (Exception e){}
               try{ if(inbox!=null){inbox.close(true);}}catch(Exception e){}
               try{ if(store!=null){store.close();}}catch(Exception e){}
     }//main end
}//class end
Protocol Trace:*
---------- java ----------
DEBUG: setDebug: JavaMail version 1.4ea
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
DEBUG: mail.imap.fetchsize: 16384
* OK Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.6944.0 (testmail.mailtest.com) ready.
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
A0 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
DEBUG: protocolConnect login, host=XX.X.XXX.X, user=XXXXXXXX, password=<non-null>
A1 LOGIN XXXXXX XXXX
A1 OK LOGIN completed.
DEBUG: connection available -- size: 1
A2 EXAMINE INBOX
* 221 EXISTS
* 0 RECENT
* FLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)
* OK [PERMANENTFLAGS ()] Permanent flags
* OK [UNSEEN 13] Is the first unseen message
* OK [UIDVALIDITY 88] UIDVALIDITY value
A2 OK [READ-ONLY] EXAMINE completed.
A3 LIST "" INBOX
* LIST (\Marked \HasChildren) "/" INBOX
A3 OK LIST completed.
A4 FETCH 11 (BODY.PEEK[HEADER.FIELDS (MESSAGE-ID)])
* 11 FETCH (BODY[HEADER.FIELDS (MESSAGE-ID)] {80}
Message-ID: <[email protected]>
A4 OK FETCH completed.
A5 FETCH 11 (ENVELOPE INTERNALDATE RFC822.SIZE)
* 11 FETCH (ENVELOPE ("Mon, 31 Jan 2005 14:27:44 +0530" "Blessed with a baby girl" ((NIL NIL "radha.krish" "wipro.com")) ((NIL NIL "radha.krish" "wipro.com")) ((NIL NIL "radha.krish" "wipro.com")) ((NIL NIL "undisclosed-recipients" NIL)) NIL NIL NIL "<[email protected]>") INTERNALDATE "31-Jan-2005 14:28:19 +0530" RFC822.SIZE 2505)
A5 OK FETCH completed.
counter-->10
A6 FETCH 12 (BODY.PEEK[HEADER.FIELDS (MESSAGE-ID)])
* 12 FETCH (BODY[HEADER.FIELDS (MESSAGE-ID)] {66}
Message-ID: <31579113.1112822648060.JavaMail.orbit@phys-indus>
A6 OK FETCH completed.
A7 FETCH 12 (ENVELOPE INTERNALDATE RFC822.SIZE)
* 12 FETCH (ENVELOPE ("Thu, 7 Apr 2005 02:54:08 +0530" "Account to Account Transfer" ((NIL NIL "CitiAlert.India" "citicorp.com")) ((NIL NIL "CitiAlert.India" "citicorp.com")) ((NIL NIL "citialert.india1" "citicorp.com")) ((NIL NIL "vishalk" "xxxx.com")) NIL NIL NIL "<31579113.1112822648060.JavaMail.orbit@phys-indus>") INTERNALDATE " 7-Apr-2005 02:25:27 +0530" RFC822.SIZE 3060)
A7 OK FETCH completed.
counter-->11
A8 FETCH 13 (BODY.PEEK[HEADER.FIELDS (MESSAGE-ID)])
* 13 FETCH (BODY[HEADER.FIELDS (MESSAGE-ID)] {65}
Message-ID: <8725992.1112822649508.JavaMail.orbit@phys-indus>
A8 OK FETCH completed.
A9 FETCH 13 (ENVELOPE INTERNALDATE RFC822.SIZE)
* 13 FETCH (ENVELOPE ("Thu, 7 Apr 2005 02:54:09 +0530" "Account to Account Transfer" ((NIL NIL "CitiAlert.India" "citicorp.com")) ((NIL NIL "CitiAlert.India" "citicorp.com")) ((NIL NIL "citialert.india1" "citicorp.com")) ((NIL NIL "vishalk" "xxxx.com")) NIL NIL NIL "<8725992.1112822649508.JavaMail.orbit@phys-indus>") INTERNALDATE " 7-Apr-2005 02:25:29 +0530" RFC822.SIZE 3063)
A9 OK FETCH completed.
counter-->12
A10 FETCH 14 (BODY.PEEK[HEADER.FIELDS (MESSAGE-ID)])
* 14 FETCH (BODY[HEADER.FIELDS (MESSAGE-ID)] {80}
Message-ID: <[email protected]>
A10 OK FETCH completed.
A11 FETCH 14 (ENVELOPE INTERNALDATE RFC822.SIZE)
* 14 FETCH (ENVELOPE ("Thu, 7 Apr 2005 10:28:17 +0530" "512K IPLC" (("Santosh Kumar Singh" NIL "Santosh.Singh" "xxxx.com")) (("Santosh Kumar Singh" NIL "Santosh.Singh" "xxxx.com")) (("Santosh Kumar Singh" NIL "Santosh.Singh" "xxxx.com")) (("XxxxIndia" NIL "All_India" "xxxx.com")(NIL NIL "all_india" "siti.com")(NIL NIL "all_india" "digiprise.com")) (("Sai Gundavelli" NIL "sai.gundavelli" "xxxx.com")) NIL NIL "<[email protected]>") INTERNALDATE " 7-Apr-2005 10:28:17 +0530" RFC822.SIZE 1534)
A11 OK FETCH completed.
exceptionjava.sql.SQLException: ORA-01401: inserted value too large for column
A12 CLOSE
A12 OK CLOSE completed.
DEBUG: added an Authenticated connection -- size: 1
A13 LOGOUT
* BYE Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.6944.0 signing off.
A13 OK LOGOUT completed.
DEBUG: IMAPStore connection dead
DEBUG: IMAPStore cleanup, force false
DEBUG: IMAPStore cleanup done
Output completed (33 sec consumed) - Normal Termination
Table Structure:*
CREATE TABLE EMAIL_ARCHIVED_MAILS
MAIL_ID VARCHAR2(100 BYTE),
EMAIL_FROM VARCHAR2(100 BYTE),
EMAIL_TO VARCHAR2(100 BYTE),
EMAIL_CC VARCHAR2(100 BYTE)
Thanks & Regards
Mohan

Failed to load context list: Code 500

Hi, after upgrading our SSM 10.0 system to SP07 FP2 we are not able to open our SSM user interface and the system is displaying "Failed to load context list: code 500":
After the upgrade we were getting some "Undefined" fields in the Admin interface which lead to problems assigning the Default Model Connection to our Contexts. We have resolved the "undefined" issue by re-importing "bootstrap.zip" using the Transport Tool. However, we're stuck at this error in the User Interface.
We have checked all model connections and all are connecting properly.
Any feedback will be greatly appreciated.
TIA
Regards,
Rodolfo

Hi, we were able to resolve this issue by deleting Cookies & Temporary Internet Files in Internet Explorer.

IView fail to load on internet

Similar Messages

Maybe you are looking for