IW32-Do not execute function reset required

Hi
We have done Do not execute function by mistake in service order IW32 and so the order has been closed.
Can you please tell us how to reset the Do no execute function in iw32
Regards
Swetha

if you set the do not execute the sys status is usually
CLSD NCMP
if that is the case you cannot reopen it
create a new order by copying this one
OR
write a quick ABAP to remove the status NCMP for the order from the back end tables (not a good practice from audit perspective)

Similar Messages

When the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

Why is my deployed application not executing functions from an external .dll?

My application executes python scripts via function calls made to the python C/API, python24.dll. It works fine in the development environment, but my deployed application does not seem to find the .dll since the the application crashes at what seems to be the first attempt to access the python shared library.
I believe I've included all the necessary support files. LV automatically included python24.dll into the installer. And I've tried to make all the paths to script files and other support files point to where the app.exe is located...some debugging windows have shown the paths to be correct in the deployed app. The call library function nodes are configured to find the python .dll in the win\system32 folder.
I feel like I'm missing some step in the build process since it works in the development environment, but perhaps there is some other trick using CLFN's that I don't understand.
I using LV7.
Thanks.

Hello CraigerB,
It seems like you are doing everything the right way. Click on the following link for a related discussion forum post.
Here is what you can try:
1. Place the dll in the C:\WINDOWS\system32 on your development machine.
2. Make sure your Call Library Function Node VI is pointing to C:\WINDOWS\system32\python24.dll
3. Build your executable
4. LabVIEW will not make a copy of your python24.dll because it will treat it differently
5. Manually copy the python24.dll to the target PC's C:\WINDOWS\system32\
6. Make sure you have all supporting files for your python24.dll to insure the dll itself is working.
7. If you are using relative paths to call your dll, switch to hard paths, or take a look at this KB for relevent information.
Hope this helps!
Kalin T.
National Instruments

Delete key function reset required

The delete key in Safari always returned to the previous page browsed. Now, for some reason, it only functions as a regular delete key and no longer moves back a page. This happened for, seemingly, no reason, I didn't reset anything. Any ideas how to reset the key so it becomes the "page-back" key it should be? I just hate having to move the arrow up to the corner all the time!
I've done the obvious, reboots etc.
Thanks.

The delete key (called backspace on a PC) deletes to the left. If you want to delete to the right, hold down the function key (fn on the lower left corner) and delete.

HOW CAN I ACTIVATE THE DO NOT DELETE FUNCTION IN IW32?

Good day!
Im trying to mark a work order not for execution but my Order - Functions - Complete - Do Not Execute function is not activated. Can you help me with this one?

Hello Rico,
can you pls give more details about your issue.
In which product are you having this problem ?
Maybe this forum is not the best place as we concentrate mainly on the BO product suite.
Thanks for clarification
Falk

Rejected by Apple because does not include features that require persistent location

We do not understand why the app was rejected by apple when we made a simple adobe AIR SDK update, this is the same app thats is on the store for the past two years.
Can anyone understand what is the reason?
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.

FIXED (for our project at least)
What the apple reviewer actually meant was that iBeacon was being enabled for the project but the info.plist didn't declare the use of location services which didn't make sense to them, I guess that implementations of iBeacon only make sense to apple if location services are used in the implementation. The problem with our project was that a third party ANE declared usage of iBeacon without us knowing anything about it and that was causing all the trouble. We contacted this third party and they updated the ANE. The game is up in the app store now.
Regards

Error "The application could not execute the required function"

Hi All,
When I try to activate the DTP the following error occurs."the application could not execute the required function".
I was able to activate the DTP for the same DataSource 2 days back but now I am unable to activate .
Kindly suggest what could be the possible reason for the same.
Regards,
Santosh Mani

If you have transformation, check it is active. Is the object 0plant is acitve or not?
Ravi Thotahdri

ORACLE 11G R1 CHECKING NETWORK REQUIREMENTS NOT EXECUTED

Hi all,
Im trying to install Oracle 11g R1 on Oracle Enterprise linux 5 so while it was checking for network requirements it showed me an requirement here is the short message :
Checking network configuration requirements ...
check complete The overall result of this check is : not executed
Recommendation : oracle supports installations on systems with DHCP-assigned public ip addresses. however the primary network interface on the system should be configured withstatic ip addresses in order for the oracle software to function properly. see the installation guide for more details on installing the software on systems configured with DHCP.
=====================================================================================================
So what should i do ? continue installation or no , can someone guide
Help me please
Thanks a lot

Thanks PavanG for your information
So i m gonna proceed to the installation and let you informed about that ...

Network Configuration requirements not executed, why?

During installation all checks are passed but this one, is there any particular reason for this check not to be executed? Should I worry over it not beein executed?
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
I'm trying to install Oracle 10g 2 on a Red Hat 4 server with a static IP.

Hi!
Either your machine is setup to use DHCP after all or the installer just has trouble to find the correct information.
Recheck the network settings of your machine (redhat-config-network).
Just ignore the warning and continue.
cu
Andreas

Do not execute business function

Dear Experts
kindly i face an issue that while trying to select function (Do not execute) for outstanding maintenance order with status (CRTD created )
but when i want to set NCMP & CLSD through this function from order change (iw32) --> order -->function-> complete --> do not execute i found it garay so what may be cause that behavior
thanks in advance
regards
hussam Ghanem

Hello
Please check whether you have authorization for this .
Take SU53 dump after executing IW32 and order -->function-> complete --> do not execute .Which will give the info about missing authorization object.
Br
Rakesh

Please help suggestions for solving built-only compiler error: 'The VI is not executable. The full development version of LabView is required tofix this error.'

We have develoepd a software tool and build it on regular basis. It currently runs error free when compiled in the editor, but when we built it and run the executable stand alone we get the error.
'The VI is not executable. The full development version of LabView is required tofix this error.' plus a broeken error.
This menas an compiler error that is not present in the editor but in the stand alone version. We tried to identify errors as suggested in several posts in this forum, but so far unsuccesfull.
As the editor and its compiler do not see the error and are running fine and the stand alone version just syas 'find the error in the editor' in this case LabView is of no help.
Can anyone suggest a sensible or 'good practice ' way of searching for the source of this error?
Our project comprises hundreds of Vis over several libraries.
Thanks,
Chris

Thanks Craig for all your suggestions.
We seem to have located the problem in a new vi just added to the package causing conflicts by using the same vi names as other vis already present in the package. Excluding this vi removed the error.
It seems related to a conflict by having two vis with the same name, which was mentioned by LabView and interactively resolved when running the main vi from the editor. When successfully building the main vi the builder did not mention this conflict and reported a successful build, but when trying to run the executable it gave the cryptic error. The error caused us problems because there was no hint for the cause, just the suggestion to solve this in the editor, while at the same time in the editor the VI was running fine.
We will post about this in detail after we have positively proven that this actually was the case.
The .net version issue was already checked.
Performance was the same on all machines we tested on including the dev machine.
Debugging was tried nut did not help as the vi could not run (broken arrow). We assumed that debugging only helps in running faulty functioning vi''s. We did not check for broken arrows in sub-vis (after connecting), that could have helped, although our application has hundreds of our own vis.
In relation to your remark:
'Are you using many classes? Have you verified that the proper access scopes are set for functions calling those vis?'
Could you elaborate on setting access scopes. We were not aware of this option in LabView, although we realize this is a basic element of the underlying c code.
Ragrds,
Chris

I recieve the following error when running an executable ("This VI is not Executable. The full development version of Labview is required to fix the errors"

I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG ‏36 KB

other PNG
Attachments:
Broken Arrow on EXE.PNG ‏179 KB

ADO function error:SQL execute.vi is not executable.

Thanks for everyone who is willing to help me out of this problem that puzzled me several days,I can't find a similar one from Google or other forum..
Problem:
When I was using LabSQL,it come an error:
Subvi "SQL execute":subvi isnot executable. and then I searched the source of the error,it was finally found to be the
"ADO Recordset GetString.vi":
"invoke node:invalid method"
"invoke node:invalid refnum class".
What I used is Windows 7 and LabVIEW7.1.
Attached is the detail of this problem that includes the vi and some error pictures,and the ADO functions I used.
ute.vi" is
Attachments:
Error.zip ‏1865 KB

Duplicate - http://forums.ni.com/t5/LabVIEW/ADO-function-error-SQL-execute-vi-is-not-executable/m-p/2397360#M742...
Try to take over the world!

Delete command are not executed in function of Java Bean

Hello Sir,
In Java bean have a function submitData.I want in this function run delete command through PreparedStatement..But Its not executed.
Please review..
public void submitData()
try
System.out.println("Printed*************************************************************");
Class.forName("oracle.jdbc.driver.OracleDriver");
System.out.println("Loading....");
Connection con=DriverManager.getConnection("jdbc:oracle:thin:@VijayKumar-PC:1521:XE","SYSTEM","SYSTEM");
System.out.println("Connection created");
PreparedStatement st=con.prepareStatement("delete from simple where NAME='?' and BNAME='?' ");
String User=getUserName();
st.setString(1,User);
String Bname=getBookName();
st.setString(2,Bname);
int y= st.executeUpdate();
System.out.println(y);
System.out.println("Query Executed");
con.commit();
con.close();
System.out.println("Your Book are Submitted *****************");
catch(Exception e)
e.printStackTrace();
}Thanks.

Dear Sir,
I removed the singleaquotes from preparedstatement.But Its not executed in this function.Like:
public void submitData()
try
System.out.println("Printed*************************************************************");
Class.forName("oracle.jdbc.driver.OracleDriver");
System.out.println("Loading....");
Connection con=DriverManager.getConnection("jdbc:oracle:thin:@VijayKumar-PC:1521:XE","SYSTEM","SYSTEM");
System.out.println("Connection created");
PreparedStatement st=con.prepareStatement("delete from simple where NAME=? and BNAME=? ");
String User=getUserName();
st.setString(1,User);
String Bname=getBookName();
st.setString(2,Bname);
int y= st.executeUpdate();
System.out.println(y);
System.out.println("Query Executed");
con.commit();
con.close();
System.out.println("Your Book are Submitted *****************");
catch(Exception e)
e.printStackTrace();
}Allthough Insert command is properly executed in another function of Java Bean.
Please review...
Thanks.

A nested exception occurred. Could not execute the function

Hi Experts,
Post upgrade of SAP Portal from 7.0 to 7.31, and when we click any application related to visual composer it shows the below error.
and the default trace shows
#2.0 #2014 07 22 02:34:11:243#0-700#Error#visualComposer_NWBIKit_logger#
#EP-PIN-PRT#tc~epbc~prtc~core#C000A7EEAF63014200000002000019B9#11738650000000004#sap.com/com.sap.visualcomposer.BIKit#visualComposer_NWBIKit_logger#C921154#36##E220BC96117411E4C8F2000000B31E1A#519cf5b0118311e48b43000000b31e1a#519cf5b0118311e48b43000000b31e1a#0#Thread[HTTP Worker [@2079636611],5,Dedicated_Application_Thread]#Plain##
A nested exception occurredCould not execute the function
[EXCEPTION]
com.sapportals.connector.execution.ExecutionException: A nested exception occurred. Could not execute the function.
at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewExecutionLocalizedException(SAPConnectorException.java:193)
at com.sapportals.connectors.SAPCFConnector.execution.functions.SAPCFConnectorInteraction.execute(SAPCFConnectorInteraction.java:617)
at com.sap.portal.guimachine.bikit.query.bw.QueryViewFlatRfc.execute(QueryViewFlatRfc.java:209)
at com.sap.portal.guimachine.bikit.designtime.bw.BWResultsetProcessor$ExecuteHandler.execute(BWResultsetProcessor.java:399)
Please give us your valuable inputs to solve this.
Thanks in advace!!
Regards,
Preetha Balan

Hi Colin,
Sorry for the delay in response!!
Yes SAP gave patch VC70RUNTIME file to apply to get rid of this error.
Even asked us to follow the sap note
1532050 - Disabling error messages that pop up at runtime
Hope this helps you
Thanks,
Preetha Balan

IW32-Do not execute function reset required

Similar Messages

Maybe you are looking for