IWork '09 Stopped Working on Mavericks

I updated my OSX to Mavericks and my iWork stop working. The update option is not available because I bought it on disc, and the software do not initialize (iWork '09). I tried to uninstal iWork and reintal many times but it does not solve the problem.... Now, I do not have the new version of iWork, so neighter the older one...

Your system language has to be set to English in order to receive the updates #iWorks'09

Similar Messages

Big Fish Games stop working in Mavericks. What do I do? I have re-installed them and the manager app, and nothing. I have not gotten an answer from Big Fish tech staff. Thought the problem might be with Maverick. all the games worked with Snow Leopard

Big Fish Games stop working in Mavericks. What do I do? I have re-installed them and the manager app, and nothing. I have not gotten an answer from Big Fish tech staff. Thought the problem might be with Maverick. all the games worked with Snow Leopard
Any body have this kind of problem. What was done to correct it. . .

I can't wait to get a new phone as well. LG Revolution owners should be comped for this phone if Verizon intends to keep them as customers.

DVD drive stopped working after Mavericks install

I have a Macbook Pro (late 08 model) that was running Snow Leopard. I recently did a clean install of Mavericks and since then the DVD drive just spins and ejects discs without being able to read them (doesn't seem to matter what I use. Software, games, audio cds, etc..). It was working fine before installing Mavericks and I can still boot from the DVD drive (old snow leopard boot disc) but it won't read any discs once booted into the OS even though the OS is detecting the drive just not the disc when inserted.
I've tried resetting the NVRAM/PRAM and resetting the SMC as suggested on other forums but like many others with the same issue it didn't help. I also cycled through several drutil commands as suggested to "wake up" the drive but that didn't help any either.
I'm kind of stumped here guys. I could roll back to Snow Leopard but I've got some software thats dropping support so I'd rather be running Mavericks if I can sort out this DVD drive issue. Clearly its not the drive itself since it worked fine before and I can boot from it. Any ideas?

Hrm looks like I might of fixed it. I went back after seeing another post about spamming drutil commands to "wake up" the drive and just spammed them about 20 or so times and the drive started working again.
I'm still very confused as to why it just stopped working within the OS after installing Mavericks (yet I was still able to boot from the DVD just fine). Clearly something is bugged in mavericks. I even came across a post on the apple forums from someone with this issue and it was effecting both his late 08 and early 2013 Macbook Pros.
I'll keep an eye on my own machine to see if it stops working again but for now it seems my drive is "fixed" go figure.

ISight stopped working on Mavericks 10.9.2 update - CPU overloading

Last Feb 25, 2014, I updated my MacBook Pro to OS X v10.9.2. Since then, my iSight Camera stopped working and my CPU is overloading.
Observing in Activity Monitor: A ReportCrash process takes 100% of CPU usage.
Originally, I've updated with Combo package.
Everything worked perfectly in 10.9.1.
I tried reinstalling 10.9.2 package, tried using both Delta and Combo packages;
I tried Repair File Permissions;
I tried Disk Repair;
...and Nothing!
Because of that ReportCrash issue, I'm unable to update my Time Machine backup and reinstall the OS, once Time Machine application doesn´t start its process, don't know why!
2007 MacBook Pro 15" (MacBookPro3,1) - Model A1226
Intel Core 2 Duo T7500 @ 2.2GHz
4GB DDR2 RAM
500GB Hard Drive
OS X Mavericks
PLEASE HELP. There's no way to use my Mac in this situation.

Hi, UnderEu,
I think to uninstall "AirParrot", "DiskplayLink" or simmialr Apps in Mavericaks, not only you have to move the Apps to Trash Bin, But also you need to uninstall their Audio & Video drivers & Settings. (which is the reason case the Crash of the system)
For the case of AirParrot, you need to do following command in Terminial Line to clear out the driver and setting:
sudo rm -rf /Library/Extensions/APExtFramebuffer.kext
sudo rm -rf /Library/Extensions/AirParrotDriver.kext
More Detail please click on link:
http://support.airsquirrels.com/article.php?id=8

Port mapping stopped working using Mavericks

Hi,
on Snow Leopard, I had iVPN using port mapping up-and-running.
Basically using this explanation (https://discussions.apple.com/docs/DOC-3415).
On Mavericks it stopped working.
I'm running AE 7.7.2, and Mavericks 10.9.1.
Tools I tried are iVPN together with a DynDNS setup (also the Personal Website).
I don't get non of these working anymore...
Any ideas?
Regards.

OK solved, or at least the problem was not with the modem or router.
Oddly, enough the app I was using to test the port forwarding did not recognize that the ports were open. Nor did the internet via canyouseeme.org. However, when I tried a previous version of the same app, it worked fine.
I am still using 7.6.1, but I will upgrade the firmware and see if things are still ok.
Sorry to clog up the boards with what turned out to be a non-issue. I'd erase this post if I knew how.

Drag and drop stops working in maverick

Hello,
running Maverick and running into this issue twice already.
I can't drag files in finder. I can select them, I can multiple select them by dragging, but clicking on them and draging them does not work at all until I reboot.
Anyone know of this issue?

Hello!
I just wanted you to know that I'm having the same problem. I just bought a Macbook Pro (maverick os) last week and today the drag and drop function stopped working. VERY frustrating since I use that function no less than 50 times a day. This is my first mac, so I was worried the solution was obvious and I just wasn't seeing it; then I found this thread. Glad to know I'm not crazy!
The restart solution does work, but I hate the idea of constantly restarting the computer. I will let you know if I find another solution.
Missing my pc a little now...

Screensaver stopped working in Mavericks

For some reason my screensaver has stopped operating in Mavericks. Im using a brand new imac 27".

Hi, there, you are not the only one having this issue. I've been dealing with it ever since I got my Mac last November. The screensaver is really sporadic, sometimes it works, sometimes it doesn't, and there seems to be no rhyme or reason to it. For me, when it stops working restarting a computer or logging out and logging back in fixes the issue temporarily but then it stops working again.
I hope Apple is aware of this and will fix it soon.

My Canon Pixma iP8500 printer has stopped working with Mavericks

Hi, my Canon Pixma iP8500 printer has stopped working in the past few days and I made no alterations that could explain why this might happen. I am using OS X 10.9.5 Mavericks on a Mac Pro desktop computer. I can print a test page when selecting it on my Canon Printer Utility from my desktop so it seems that there is contact between the computer and the printer but it will not print from iPhoto, Preview or Mail. When I select Print from any of these nothing happens and there is nothing on the Print List. I have checked the Printers & Scanners in my System Preferences and my Canon iP8500 is listed and highlighted as Idle Default and Share this printer is ticked. I have tried deleting this printer then adding it but it still will not print. I would appreciate any helpful suggestions bearing in mind that I am fairly elderly and have a limited knowledge of IT and some of the terminology.
Thank you,
Colin.

Hi, might try this...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

My wireless stopped working (OS Mavericks)

Yesterday, my wireless stopped working. I have a pc and the wireless is working fine. However in my macbook and ipad mini the wireless is not connected. It says the network is on but that it cannot join. Also, recently I have a "network thunderbolt bridge" message appearing. I have already tried what was suggested in this thread (https://discussions.apple.com/thread/5498344) but it didn't work and wireless is still off.
Does someone has any suggestion?

There is a bug with maverick os that switches off your wifi if mac detects its been idle.
I real bummer at the moment for those that purchased wifi products and are having to ethernet connect to get reliable connection to their hardware.
Write to mac on their help line and query the problem, hopefully someone will get around to fixing the problem.

Mouse and keyboard stop working with Mavericks

This has happened twice now since installing Mavericks.
I'll be working along, and then all of a sudden, I am not able to click with my mouse and my keyboard stops working. I AM able to move the cursor around on the screen. But, I am not able to click on anything and I can't use the keyboard to force quit the finder. The only way to get unstuck is to press the power button on the front of the Mac to shut it down and then restart.
I am using a wired Apple Keyboard and a wireless Apple Magic Mouse. My Mac is a MacPro 2 x 2.3 GHz Quad-Core Intel Xeon Mac.
Like I said. this has never happened before. But it's happened twice since installing Mavericks.

Everytime I restart my computer, especially for updating maverick, my keyboard and attached mouse (both apple for an Imac) stop working. When I plug in an other keyboard, I can get into my Imac again. Would this SMC apply to this problem as well?
What should I do?
thanks, hb

Dual monitor stopped working after Mavericks installed

27-inch Mid 2010 iMac - upgraded to Mavericks, now LG monitor gives "no signal" error message. LG model is 27EA83, connection is via DisplayPort. It worked before (Lion) and also works with MBPro upgraded to Mavericks. The iMac recognizes the monitor but nothing shows up onscreen. Any ideas?

miss you steve

Camera stops working after Mavericks install

Ever since the first upgrade to Mavericks my camera goes in/out. A full reboot will restore it, it will work for one or two skype/hangout/facetime calls (app does not seem to matter), but then it will disappear again "no camera detected in preferences" and I'll have to reboot again.
I have a 15" MacBookPro Retina Mid 2012
Processor 2.3 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
Software OS X 10.9.2 (13C64)
Obviously I have the latest Mavericks update, and I also have performed all of the suggestions given here: https://discussions.apple.com/docs/DOC-6431 already.
I'm frustrated and would welcome any advice,
Thanks!
Lisa

lisagrice wrote:... I also have performed all of the suggestions given here:
http://discussions.apple.com/docs/DOC-6431 already.
You cannot have done everything recommended in the https://discussions.apple.com/ docs/DOC-6431 tip.
One of the suggestions from the How to Troubleshoot iSight link included in the tip is to "... contact Apple or an Apple-Authorized Service Provider for service." (MBP link added here.)
Unless you decided that the estimated repair cost is prohibitive, they would have made your Mac work properly.
Message was edited by: EZ Jim
Mac OSX 10.9

IMac camera stopped working after Mavericks upgrade

I just upgraded my iMac to Mavericks and the camera now refuses to work.
Details are:
I've performed every step in this tip https://discussions.apple.com/docs/DOC-6431
Performed all steps in this trouble shooting article http://support.apple.com/kb/HT2090 - yes every step!
Reset the SMC http://support.apple.com/kb/HT3964 and PRAM http://support.apple.com/kb/HT1379
I've installed the Mavericks update OS X Mavericks 10.9.2 Update (Combo)
In addition it makes no difference in another user or in various camera apps and all Apple apps mentioned here http://support.apple.com/kb/PH14085 freeze and need to be force quit.
I've checked and repaired disk permissions, even restarted from recovery partition and checked the disk.
This computer worked fine up until the second I upgraded to Mavericks.
Computer:

You have certainly been thorough!
dnw76 wrote: ... I've performed ... all steps in this trouble shooting article http://support.apple.com/kb/HT2090 - yes every step!...
One of the steps in http://support.apple.com/kb/HT2090 is
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
What service did the service people tell you was still needed to get your iMac working correctly and why did you not do that?

Screen saver stopped working with Mavericks

Hi,
Actually I have two problems.
1. Since upgrading to Mavericks, my screen saver does not work. How do I fix this?
2. Since upgrading to Mavericks my Apple menu bar at the top is no longer transparent and some times does load at start up. I do have it set to be transparent. If I click on a program on my dock, the menu bar will appear, but not transparent.
Anyone else having these problems?
Thanks,
Dennis

To get your screen saver and sleep mode working again just follow these steps:
This is always due to a process keeping the system awake, but determining which is the challenge.
A first simple step is to create a new, temporary user account. Log out of yours and log into the temporary one. Determine if it sleeps then. If it does then you have a login item that is preventing sleep. System Preferences > Users & Groups > Login Items.
Whenever you suspect a problem related to power, including sleep, an SMC reset is also recommended.
Active Spotlight indexing will prevent sleep. Wait for it to complete. That may take several hours following an OS X upgrade.
Check your Sharing preferences for anything that could permit an active network connection.
Energy Saver "Wake for network access" can prevent sleep, but unchecking it will prevent the ability to remotely access a sleeping Mac over a network.
A normally functioning Mac will sleep according to Energy Saver, but will wake periodically for network access, after which it will return to sleep according to the settings in Energy Saver.
Check Energy Saver > Power Nap. Whatever its setting happens to be, change it. Power Nap itself does not prevent sleep, but a corrupted Power Nap setting might. Changing its setting might correct it.
Unfinished print jobs will prevent sleep. If a print job is queued, but if the printer is off or the connection to it is lost, the Mac will stay awake forever waiting for the printer to return.
Safari pages that periodically refresh themselves are very common. This will prevent sleep.
Frequently checking for new mail may prevent sleep. Change Mail's preferences to check for new mail less frequently.
iTunes and iPhoto sharing will prevent sleep.
Active Bluetooth devices will prevent sleep.
Active USB or Thunderbolt devices will prevent sleep. Disconnect them to help isolate the cause.
Using Time Machine over a network may prevent sleep. Time Machine using a Time Capsule will not.
There are plenty of third party utilities designed to prevent sleep. One may not have been completely uninstalled.
Quit the process with the name powerd in Activity Monitor. It will re-launch on its own.
Any number of "anti-virus" utilities can prevent sleep, along with other miseries. Get rid of them.
Read Mac OS X: Why your Mac might not sleep or stay in sleep mode
It may be instructive to identify the actual process that is preventing sleep. The following instructions can be used with any OS X version.
Open Terminal and Activity Monitor. Both are in your Utilities folder. Leave them open.
Open System Preferences > Energy Saver, and set the Mac to sleep after the shortest possible idle time (one minute)
Wait a minute, during which you touch nothing
When it becomes obvious the Mac will not sleep, type the following in the Terminal window, followed by the Return key:
pmset -g
Look for the line resembling the following:
sleep 1 (sleep prevented by 360)
Note the process ID (360 in the above example). Mavericks will indicate the process name directly.
In Activity Monitor, select Window > Activity Monitor, and select the CPU tab. Click on the column with the heading "PID" to sort processes by their process ID. Find the Process Name corresponding to the PID above.
That will be the process that prevented sleep.

Toshiba E-Studio 603 stop working after Mavericks Upgrade

At my work place we have a department shared printer through cable ethernet. I've got my rMBP hooked up by a USB ethernet adaptor to the network. The printer used to work properly with drivers installed (official from Toshiba) under Mountain Lion.
However after I upgrade to Mavericks, whenever I print the Printer job will say "Printing - Connecting to printer" then freeze for a couple of minutes until says "The printer is not responding" and freeze forever unless I close the Printer job window.
I've tried reinstalling the driver, resetting printer system then add the printer back, reinstall system, etc. Also I'm pretty sure that the department code fields are entered and selected everytime I tried. Thus far no solution.
Has anyone experienced similar issue? Or has anyone got solutions? This has been really frustrating to me. Thanks!
Steven

Thanks for responding. Before adding the printer I'll install their driver and select the one from list. There's the option for toshiba e studio xxx, so I wasn't selecting anything else.
Anyway the problem is it used to work the way I set up in mountain lion, but not in mavericks.

IWork '09 Stopped Working on Mavericks

Similar Messages

Maybe you are looking for