IWS Web Connector Hangsup on Descent Loads

Hi All,
Env: iWS 6.0, iAS 6.0 SP 4, Solaris
We are facing some problems at descent loads about 50 users using iWS Web Connector. Everything works fine with the load test for first couple of hours and then after that the iWS Web Connector Stops forwarding requests to Application Server.
From the logs of the connector i got following errors
[08/Jan/2002:22:51:23]: Information (20289): conn : invalid packet type (0xd0a) received in GXCONN (conn 0x532278, sock 27, host 0xac130249, port 10818)
[08/Jan/2002:22:51:23]: Information (20289): RunConnection : Close conn=0x532278
[08/Jan/2002:22:51:23]: Information (20289): GXConnMgr : Closing conn 532278
[08/Jan/2002:22:51:23]: Information (20289): GXConnMgr : Delete conn table
[08/Jan/2002:22:51:23]: Information (20289): GXConn::GetNextBuffer() : invalid reply type received in GetNextBuffer (conn 0x532278, sock 0, host 0x0, port 0)
[08/Jan/2002:22:51:23]: Information (20289): GXConn::GetNextBuffer() : invalid reply type received in GetNextBuffer (conn 0x532278, sock 0, host 0x0, port 0)
The process does not crash, but stops forwarding any requests. So i have to restart it.
Any ideas as to what could be wrong?
Thanks,
Yousuf.

Hi Angus,
First of all, in a single application server installation you can't have two
instances like iWS, two have two instances of iAS you have to have two
installation of iAS.
Secondly your webconnector/plugin has the information about only one GXIP
and GXPORT, that is IP address and the KXS port number of the iAS server,
through which it tells the webserver as to which iAS it should forward the
requests containing "NASApp" string in the URL.
So you can't configure two plugins for a single web server instance.
If you want to forward the requests form a webserver to both iAS, than you
have to configure the two iAS in a cluster, and deploy the application on
both.
But you can have multiple webservers pointing to a single iAS.
Please mail me back if you have more questions.
Sanjeev.
Developer Support Team iAS.
Angus Yiu wrote:
I would like to set up an envrionment have the following condition:
one application server have two (ias_a, ias_b) iAS instance;
one web server have two (iws_A, iws_B) web instance;
the web sever is installed web connector on iws_A and point to ias_a.
1: My question is how to make iws_A also point to ias_b, because two ias
instance are doing different job.
2: How to insall a second web connector onto iws_B (also point to ias_a
and ias_b)? because i have already install one web connector for iws_A.
Thanks,
Angus--
When you smile, you know you're alive, It's what defines me.
Sanju...
----------------------------------------------------------------------

Similar Messages

How can i install the web connector in the IWS for IAS SP3?

i have installed the IAS 6.0 SP3 and IWS 6.0 on two different NT server. How do i install the web connector to the IWS. How can i access the IAS form the IWS. The IAS 6.0 SP3 Evaluation does not allow to install only the web connector componet. Pls advise

Hi,
Installing web server & app server on different machine and making them communicate is called "webless installation". Having web server & app server running on same system is called "webful installation".
On a registered version, if you select CUSTOM INSTALL, then you would have a screen asking to install iDS and iAS. From the submenu of iAS, the web connector plugin has to be selected and this installation is done at the system where web server is running.
But on your case, I believe the iAS SP3 evaluation has a restriction on that. Please feel free to raise any questions regarding this.
Regards
Raj

GX Error - after - Install Web Connector Plugin for iWS

After custom installation from web connector plugin in iWS, the
browser shows
GX Error
socket result code missing !!!
Is seems the plugin can't call the remote web application.
I see a establised connection between the web server and die application
server port 10818 (Exec Proc)
and to the LDAP server port 50505.
If I connect directly the web server installed lokaly the appilkation runs
(fortune).
Any idee ?
Sven Kirsten

Okay, lets say more about the scenario:
server1 server2
|---------------- ---------------------------
| iWeb Server | | iApplication Server (Exec
Port 10818) |
| with plugin |---------------------|LDAP Server (Port 50505)
|
|---------------| | iWeb Server with Plugin
|
If I go to server 2:
http://server2/NASApp/fortune/fortune
fortune runs
If I go to server1
http://server1/NASApp/fortune/fortune
I got the message on the browser
GX Error
socket result code missing !!!
Thats meens, the application servers runs fine.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If I run from server 1:
In the kxs_0_CCS0 log on the server2 I find the following:
[04/Okt/2001 10:57:25:7] info: NSAPICLI-012: plugin reqstart, tickct:
1002185845s 794005us
[04/Okt/2001 10:57:25:7] warning: UTIL-013: GXGUID: NameTrans lookup failed
(Applogic Servlet fortune_fortune)
[04/Okt/2001 10:57:25:7] warning: NSAPICLI-011: socket result code
missing!!!
[04/Okt/2001 10:57:25:7] info: NSAPICLI-009: plugin reqexit: 0s 1828us
In the kjs_1_CCS0 log on server 2 I find the following.
[02/Okt/2001 17:30:18:1] error: Exception: SERVLET-execution_failed: Error
in executing servlet JSPRunner: java.lang.NullPointer
Exception
Exception Stack Trace:
java.lang.NullPointerException
at com.netscape.server.servlet.jsp.JSPRunner.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Compiled Code)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Compiled
Code)
at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If I run from server 2:
In the kxs_0_CCS0 log on the server2 I find the following:
[04/Okt/2001 11:08:58:1] info: NSAPICLI-012: plugin reqstart, tickct:
1002186538s 187717us
[04/Okt/2001 11:08:58:3] info: NSAPICLI-009: plugin reqexit: 0s 113269us
In the kjs_1_CCS0 log on server 2 I find the following.
[04/Okt/2001 11:05:55:8] info: --------------------------------------
[04/Okt/2001 11:05:55:8] info: FortuneServlet: init
[04/Okt/2001 11:05:55:8] info: --------------------------------------
[04/Okt/2001 11:05:56:0] info: --------------------------------------
[04/Okt/2001 11:05:56:0] info: jsp.APPS.fortune.fortune: init
[04/Okt/2001 11:05:56:0] info: --------------------------------------
++++++++++++++++++
In the error case there is a NameTrans Lookup failure for the web
application.
The naming service from the application server can't locate the fortune
application.
I hope it helps you the locate more detailed the problem.
Thanks,
Sven K
"Sven Kirsten" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
After custom installation from web connector plugin in iWS, the
browser shows
GX Error
socket result code missing !!!
Is seems the plugin can't call the remote web application.
I see a establised connection between the web server and die application
server port 10818 (Exec Proc)
and to the LDAP server port 50505.
If I connect directly the web server installed lokaly the appilkation runs
(fortune).
Any idee ?
Sven Kirsten

An iAS 4.1 Web Connector looked up the wrong IP, is there a way to change it ?

I have one working iWS 4.1 instance running on Solaris 8.
I have decided to install anthoer web server instance + web connector to iAS 6.0 for SSL purposes.
However, after I set up the second instance and when I ran the page, an error 500 is returned and the web log is as follows:
[21/Jan/2002:16:11:51] config ( 586): for host 192.168.128.2 trying to GET /NASApp/test/test.jsp, handle-processed reports: no way to service request for /NASApp/test/test.jsp
192.168.128.2 is our company's internal router.
Any suggestion to make it working ? Or any ideas what went wrong in there ?
I have checked the configured IP in the kregedit of the second instance, (/CCS0/HTTPAPI/GXIP) which is set to 192.168.128.9 (our iAS server).
Any solutions ?
Thanks and regards,
Kasnol

Hi, I think I got confused with the error message, it seemed to me that 192.168.128.2 is the client IP access the Web server, not the IP which Web Connector is trying to access App server.
Any idea how to solve the error message ?
[21/Jan/2002:16:11:51] config ( 586): for host 192.168.128.2 trying to GET /NASApp/test/test.jsp, handle-processed reports: no way to service request for /NASApp/test/test.jsp
Thanks and regards,
Kasnol

Error "This web part was unable to load"

Hi!
I'm designing workflow in Sharepoint designer 2013 for Project Server. I have 3 stages. In second stage I have "start a task process (task outcome to variable: outcome)" and in "transition to stage" I have:
If variable: outcome equalls approved
go to third stage
else
go to first stage
I receive a new task and I click "rejected". Then I refresh this page "Project Detail Pages - Workflow Stage Status" and I get this error:
Workflow Status
This Web Part was unable to load.
Information that may be useful in solving this problem was written to the Unified Logging Service (ULS) log on the Project Web App with the following ID: c2780c9c-323c-20cd-dc2e-02cf3e2bd3d3
For more information, contact your Project Web App administrator.
How do I solve this? Workflow goes back to first stage and everything else seems to work (In my first stage I have wait for project submit and if I click submit, workflow goes to second stage and that web part reloads fine).
Best regards
Parkelj

I found a way to handle this issue. Webpart is not able to capture the movement to the last stage in the same phase. You can easily move back to a stage in the other Phase. e.g.,
Phase 2: Stage 2 -> Phase 2: Stage 1 (Issue)
Phase 2: Stage 2 -> Phase 1: Any Stage ()
You can add a new stage in previous phase and in the Transition to Stage segment put a Go to Stage action to your desired stage.
The flow will be
Phase 2: Stage 2 -> Phase 1: Transition Stage -> Phase 2: Stage 1
By doing this the Workflow status will work fine but the only trade off will be an additional Phase movement will be displayed in the workflow visualization (marked in red in the below image).
I hope it will help you guys.

Timesheet error (Only for one user on one task): This Web Part was unable to load

Hi,
We have a weird problem with Project server 2013.
We are on the latest March CU 2015 update on MS Project and Project server.
Problem:
A resource(user) is being assigned to a task. When opening the Project with the MS Project client, you can see that the resource is effectively assigned.->OK
The real problem is when the user goes to his timesheets. He don’t see this task anymore. Other users that are assigned to the same task can see this task in the Timesheets and can open it.
When the user go back to a timesheet on a period where the task was working and visible, and he open that timesheets, he get an error: “This Web Part was unable to load”
ULS log:
[bucketHash:F0949503] There was an error while loading statusing information in the task details webpart for the specified project/assignment - Project UID: 231d4fab-e08b-44fb-8d49-04f7deff207d Assignment UID: 55e2c540-c8ae-42fa-8458-c1c6e98d98f8.
This could be caused by an out-of-date link to the task details page, specifying invalid information, or it could indicate a potential problem with the project or assignment. Exception details follow. Type: 'Microsoft.Office.Project.PWA.StatusingLib.StatusingException',
message: 'StatusingDataAccess.GetProjData could not find pre-cached data. Attempted to load Guid - 231d4fab-e08b-44fb-8d49-04f7deff207d' and stack trace:    at Microsoft.Office.Project.PWA.StatusingLib.StatusingDataAccess.GetProjData(Guid
docGuid)     at Microsoft.Office.ProjectDataEdit.Document.SvrDoc..ctor(Guid docGuid, ISvrDataAccess dataAccess, SvrDoc entDoc, SvrDoc resourcePool, Boolean bUseProjectResources)     at Microsoft.Office.Project.PWA.StatusingLib.StatusingDataEdit.InitSvrEditForDoc(Guid
docGuid)     at Microsoft.Office.Project.PWA.CommonControls.TaskDetails.QueryData().
[bucketHash:D7120B28] Webpart TaskDetailsPart failed in CreateChildControls. Unique ID: efbaf89c-01a5-e078-a033-bc18fe4d431c Microsoft.SharePoint.SPException: The Project and/or Assignment unique ID refers to a missing
or invalid object.     at Microsoft.Office.Project.PWA.CommonControls.TaskDetails.QueryData()     at Microsoft.Office.Project.PWA.CommonControls.TaskDetails.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.AddedControl(Control control, Int32 index)     at Microsoft.Office.Project.PWA.WebParts.PWAResiliencyPart.CreateChildControls() StackTrace: at Microsoft.Office.Project.Server.Native.dll: (sig=ad0ca0fd-3c62-4564-9144-b6fd1f587187|2|microsoft.office.project.server.native.pdb,
offset=3C16) at Microsoft.Office.Project.Server.Native.dll: (offset=1265D)
We tried already to republish the whole project with the ‘Save for Sharing’ workaround
without success.
Someone any idea?
Since we are migrated to Project 2013, we have a lot of problems with Project Server. Too late to go back
L
Thanks in advance,
Johan

Hi Johan,
The assignment of this user on the given task might be corrupted. Try to remove the resource from the task, publish the project, assign the resource again and publish again the project. If it is not working, try to unpublish the task (column "publish")
and publih it again.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

ProjectCenter Webpart on another Site Collection "This Web Part was unable to load"

Hi,
Project Server 2013 on an url like http://domain.tld/pwa
Trying to use the Project Center Web Part from another site collection, let's say http://domain.tld/sites/siteA
I get the "This Web Part was unable to load" error and in the ULS I get Object Reference not set to an instance of an object classic error
What am i doing wrong?
Thanks!

Thank you for the thoughts Michael but none of those worked for me.
What I have done so far is I have added the PWA features to the site which is what has made it work when logged in under the farm account.
So I have 3 account I am testing with
1.) regular account with read only permissions to the Publishing page
2.) Admin account that is in a group that is a site administrator to ALL sites
3.) Farm account
Currently it works for the Farm account and the Admin account but not the regular account. I have added the regular account to the same group as the Admin account and will test when the change updates to see if I can access the information. This
will at least let me know that it is a Permissions issue which is what I think it is I just cant figure out which permission it would need to be.

Web Services Round Robin Service Load Balancer Event Endpoint Failure

I keep seeing these errors in the UlsTraceLogs:
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure Process Name: OWSTIMER Process ID: 3748 AppDomain Name: DefaultDomain AppDomain ID: 1 Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:9b3095eda69947b299d2f873bbfee5ad#authority=urn:uuid:a01381a61b244525ab4fec30cde9dc5f&authority=https://ApplicationServerName:port/Topology/topology.svc
Active Endpoints: 2 Failed Endpoints:1 Affected Endpoint:
http://WFEserverName:port/9b3095eda69947b299d2f873bbfee5ad/ProfileService.svc
what do these errors mean?

ok, thanks, I'll have a look at that.
Going back to my issue... Since I stopped the User Profile Service on the Application server, now I'm getting these non-stop messages in the log:
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure Process Name: w3wp Process ID: 6088 AppDomain Name: /LM/W3SVC/261708640/ROOT-1-130709594108226406 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:9b3095eda69947b299d2f873bbfee5ad#authority=urn:uuid:a01381a61b244525ab4fec30cde9dc5f&authority=https://ApplicationServerName:port/Topology/topology.svc
Active Endpoints: 2 Failed Endpoints:1 Affected Endpoint:
http://ApplicationServerName:port/9b3095eda69947b299d2f873bbfee5ad/ProfileService.svc
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure Process Name: OWSTIMER Process ID: 8304 AppDomain Name: DefaultDomain AppDomain ID: 1 Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:9b3095eda69947b299d2f873bbfee5ad#authority=urn:uuid:a01381a61b244525ab4fec30cde9dc5f&authority=https://ApplicationServerName:port/Topology/topology.svc
Active Endpoints: 2 Failed Endpoints:1 Affected Endpoint:
http://ApplicationServerName:port/9b3095eda69947b299d2f873bbfee5ad/ProfileService.svc
This time, the messages are referring to the same server - the Application Server. In my original question, I should've differentiated the server names when I pasted the message. Originally the message was referring to the Application
Server and Affected Endpoint was referring to a WFE. I'll edit my original post to make it correct.

Can I use Web Connector(Proxy) by file extension?

Hi, All~
As you know, we can use proxy by ppath or extension in WebLogic
like below.
How can I configure NWS 4.1 obj.conf, so that web connector can
catch all jsp files for iAS6.
<Object name="si" ppath="*/servletimages/*">Service fn=wl-proxy
WebLogicHost=otherserver.com\ WebLogicPort=7008</Object>Service
method="(GET|HEAD|POST|PUT)" type=text/jsp fn=wl-proxy\
WebLogicHost=192.1.1.4 WebLogicPort=7001 PathPrepend=/jspfiles

There is no equivalent in iAS. A URL token must be used.
David
A??>Co wrote:
Hi, All~
As you know, we can use proxy by ppath or extension in WebLogic
like below.
How can I configure NWS 4.1 obj.conf, so that web connector can
catch all jsp files for iAS6.
<Object name="si" ppath="*/servletimages/*">Service fn=wl-proxy
WebLogicHost=otherserver.com\ WebLogicPort=7008</Object>Service
method="(GET|HEAD|POST|PUT)" type=text/jsp fn=wl-proxy\
WebLogicHost=192.1.1.4 WebLogicPort=7001 PathPrepend=/jspfiles

Some web pages take long to load

I just recently got my mac and i like it better than my PC. There is only one problem I run into. I have noticed that some web pages take long to load and once they are loaded i try scrolling down or up and the web page lags big time. Also the grapics are not all that great. My PC runs the pages just fine. This is not a problem for all web pages but only a few. Mainly I see the problem on some myspace profiles. I was just wanted to see if anyone knows why I am having this problem.
imac intel core duo Mac OS X (10.4.6)

Welcome to the discussions!
It is slower in a measureable sense, or just a "seat of the pants" feeling?
Go to PC Pitstop and run their test. If you are getting the bandwidth that you are paying for, then it is an issue with your broswer.
I do not like Safari. It is slower than Camino, especially in conjunction with CamiTools. Safari is a memory hog and grabs CPU cycles like nobody's business. I have never had any issues with either Camino or Firefox. Either are much better than Safari, IMO.
If you miss the look of Safari, there are skins and even a great RSS reader that can be added to Firefox called Sage. It offers better RSS integration than Safari IMO.
In my experience, Macs just render pages slower than PCs due to poor coding or IE specific coding that lazy web authors. Safari is one of the most standards compliant browsers out there, but if the pages are coded poorly or browser specific, then there is nothing that Safari can do about it.
You can take a look at some settings, but let us know what speeds you are paying for from your ISP and compare those to the actual speeds. Then we can talk about possible solutions.

Some web pages do not stop loading

When I am browsing the internet certain web pages do not stop loading at all; the activity icon rotates continuously and when this happens my CPU loads go to around 25-30% continuously across all my cores (2 or 4 depending on the machine I am using) vs. around 2% if a page loaded completely. So this situation is wasting electricity and heating up my machines unnecessarily.
I am using the latest version of Firefox 5 within openSUSE linux 11.3 and 11.4, as well as in Win XP and 7 Ultimate on two separate computers, both desktops.
The problem is the same in any of the OS's I use in either machine, and what is worse, it is happening since some of the last iterations of Firefox 3.6, and then 4 as well.
Disabling all privacy settings individually, or in any combination, do not stop the problem. Nor can I eliminate it by disabling Java, or by using the latest Flash and Adobe Reader versions.
Fortunately, this does not happen in all web sites. Others might load the initial page, but stop loading all subsequent pages within that site or just a few. businessweek.com behaves in this last way.
If I manually stop the loading, as far as I can tell the entire page loaded completely from the first moment. Everything is in there; so apparently there is (are) some kind of a common process(es) where Firefox enters a never-ending loop.

I have the problem using Firefox 8.0.1.
Particularly when loading any '''https:// '''websites and control panels.
This occurs in XP Pro SP3 / Windows Vista Ultimate / and Windows 7 Ultimate.
This did not occur in Firefox 8.0

Web sites will not fully load. MSNBC, Fox and CNN load a partial page or load a text only version. this issue just started about a week ago.

Some news web sites will not fully load. MSNBC will only show the head line and advertisers. CNN and Fox show a text only version with very limited pictures and the same for . Durdge report loads fully as will the Chicago Trib. seems like only certain news sites are subject to this partial display. have not seen this on commercial sites.

Try deleting cookies and cache:
1. Tools| Clear recent history
2. Time range to clear: Everything
3. If it isn't already selected, select '''Cookies''' and '''Cache'''
4. '''Clear now'''
Test for the problem
Also see: [[Websites look wrong]] and [[Troubleshooting Extensions and themes]]

Some web pages are unable to load

hello there,i notice that my mac mini are unable to load some web page that build-in with msxml.i found that all my web brower are unable to load them(firefox/safari/IE for mac),but i can load them in my window XP PC,i think the problem is my XP have installed msxml but my mac,is it possible to view those web pages with safari/mac?
example to those web:http://spbo.com/live.htm
mini Mac OS X (10.3.9)

Welcome to the discussions!
It is slower in a measureable sense, or just a "seat of the pants" feeling?
Go to PC Pitstop and run their test. If you are getting the bandwidth that you are paying for, then it is an issue with your broswer.
I do not like Safari. It is slower than Camino, especially in conjunction with CamiTools. Safari is a memory hog and grabs CPU cycles like nobody's business. I have never had any issues with either Camino or Firefox. Either are much better than Safari, IMO.
If you miss the look of Safari, there are skins and even a great RSS reader that can be added to Firefox called Sage. It offers better RSS integration than Safari IMO.
In my experience, Macs just render pages slower than PCs due to poor coding or IE specific coding that lazy web authors. Safari is one of the most standards compliant browsers out there, but if the pages are coded poorly or browser specific, then there is nothing that Safari can do about it.
You can take a look at some settings, but let us know what speeds you are paying for from your ISP and compare those to the actual speeds. Then we can talk about possible solutions.

Any QuickBooks Web Connector Resources Out There?

Hi Guys and Gals,
I'm on this kick to make an application for QuickBooks using Oracle's SOA Suite and ADF. I've gone through "Getting Started with Oracle SOA Suite 11gR1 - A Hands-On Tutorial" but I'm only marginally closer to connecting to QuickBooks than when I started.
Does anyone know of a sample application that uses the Web Connector and SOA Suite? There are a couple of applications included with the QuickBooks SDK but they're all straight Java or C# files, which is way beyond me at the moment.
Straight documentation doesn't usually help. I learn best if I can get my hands on something I can tear apart, see how it works, and put it back together.
I'm really quite new to all this, so any relevant feedback would be appreciated. Google, these forums, etc. aren't really returning any hits.
Thanks,
Will

Hi, Drew-
http://forums.adobe.com/thread/887669?start=0&tstart=0
This particular thread on our Labs Preview forum has some great mobile examples on it. You can scan through them and look particularly for the ones made with Preview 7, which functionality-wise was the closest to 1.0.
Cheers,
-Elaine

Web pages are slow to load up.

I am having trouble loading up web pages, they do eventually load but its very slow. I wan't to delete unwanted/ junk files how do i do this

The first thing you should do is check your internet connection, try it out here:
http://www.speedtest.net
One important thing to note is to ignore the ads at ALL COSTS, that mac clean thing is NOT something you want
If your results are 5mbs or less, I would say its your internet connection to check.
Secondly, use an up to date browser such as chrome or safari. If you have any exemptions, turn them off.
Those are some tips I have, I have no clue how to remove junk files to speed up your browsing experience.
Hope this helped

IWS Web Connector Hangsup on Descent Loads

Similar Messages

Maybe you are looking for