J1INCHLN - Error in defining Rec. Type

Hello,
When i am Remitting Challan through J1INCHLN Tcode , at that  time system is including the tax amount  of Recip. CO into OT. I have already check the master of that Vendor and in that we have defined Recip.Type of that Vendor as CO eventhough system is intrchanging it into Other.
Waiting For Reply and thanks in advance.
Regards,
SANJU

Check tax Code assigned in Vendor Master , if tax code is assigned for Company & receip type assigned OT then in J1INCHLN system will showing in recip type OT but actual entry posted in Compnay GL Account.
Use transaction code FBL3N , put GL account of Company TDS,if it is still there means you have assigned wrong TDS Code
Check & revert
Reg
Umesh

Similar Messages

  • Syntax error when creating a user-defined table type in SQL Server 2012

    Why am I getting a syntax error when creating a user-defined table type in SQL Server 2014?
    CREATE TYPE ReportsTableType AS TABLE 
    ( reportId INT
    , questionId INT
    , questionOrder INT );
    Results:
    Msg 156, Level 15, State 1, Line 1
    Incorrect syntax near the keyword 'AS'.

    Hope these posts could help, 
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/37a45a9a-ed8c-4655-be93-f6e6d5ef44be/getting-incorrect-syntax-while-creating-a-table-type-in-sql-server-2008-r2?forum=transactsql
    Regards, Dineshkumar,
    Please Mark as Answer if my post answers your question and
    Vote as Helpful if it helps you

  • JPub Error User-defined type not found

    I just have found about Jpub could help me with my problem, so i try it, but when i try to publish a package it gives me this error:
    J2T-118, ERROR: User-defined type "ADMCAD.PKG_CONSULTA_BR_NOME.TAB_ELEITOR" was
    not found in the database
    This is the package:
    create or replace package admcad.pkg_consulta_br_nome as
    VT_NUM_INSCRICAO VARCHAR2(12);
    VT_COD_SIT_ELEITOR NUMBER(2);
    VT_NOM_ELEITOR VARCHAR2(70);
    VT_DAT_NASC NUMBER(8);
    VT_NUM_ZONA NUMBER(4);
    VT_SGL_UF VARCHAR2(2);
    -- tipo que sera retornado
    TYPE REC_TAB_ELEITOR IS RECORD (
              NUM_INSCRICAO VT_NUM_INSCRICAO%TYPE,
              NOM_ELEITOR     VT_NOM_ELEITOR%TYPE,
              NOM_PAI     VT_NOM_ELEITOR%TYPE,
              NOM_MAE     VT_NOM_ELEITOR%TYPE,
              DAT_NASC     VT_DAT_NASC%TYPE,
              DAT_DOMIC_MUNIC     DATE,
              COD_SIT_ELEITOR     VT_COD_SIT_ELEITOR%TYPE,
              SGL_UF     VT_SGL_UF%TYPE,
              NUM_ZONA     VT_NUM_ZONA%TYPE);
    TYPE tab_eleitor IS TABLE OF REC_TAB_ELEITOR INDEX BY BINARY_INTEGER;
    TYPE cursor_consulta IS REF CURSOR;
    SUBTYPE T_NUM_INSCRICAO is VT_NUM_INSCRICAO%TYPE;
    SUBTYPE T_COD_SIT_ELEITOR is VT_COD_SIT_ELEITOR%TYPE;
    SUBTYPE T_NOM_ELEITOR is VT_NOM_ELEITOR%TYPE;
    SUBTYPE T_NOM_PAI is VT_NOM_ELEITOR%TYPE;
    SUBTYPE T_NOM_MAE is VT_NOM_ELEITOR%TYPE;
    SUBTYPE T_DAT_DOMIC_MUNIC is date;
    SUBTYPE T_DAT_NASC is VT_DAT_NASC%TYPE;
    SUBTYPE T_SGL_UF is VT_SGL_UF%TYPE;
    SUBTYPE T_NUM_ZONA is VT_NUM_ZONA%TYPE;
    TYPE rec_consulta IS RECORD (
    num_inscricao T_NUM_INSCRICAO,
    cod_sit_eleitor T_COD_SIT_ELEITOR,
    nom_eleitor T_NOM_ELEITOR,
    nom_pai T_NOM_PAI,
    nom_mae T_NOM_MAE,
    dat_domic_munic T_DAT_DOMIC_MUNIC,
    dat_nasc T_DAT_NASC,
    sgl_uf          T_SGL_UF,
    num_zona          T_NUM_ZONA);
    procedure prc_consulta (     d01_cod_fon_nome in varchar2,
              d01_cod_fon_mae in varchar2,
              d01_dat_nasc in number,
                   d01_qtd_regs out number,
              vtab_eleitor in out tab_eleitor);
    end pkg_consulta_br_nome;
    This is the command line:
    jpub -user=XXX/XXX@there -sql=admcad.pkg_consulta_br_nome
    Am I wrong, or jpub was suppose to publish any type in the signature?
    Please help.
    Rafael Dittberner

    Rafael,
    I suggest you try asking in the Toplink discussion forum. You can find a link to it from this Web page:
    http://www.oracle.com/technology/products/ias/toplink/index.html
    Good Luck,
    Avi.

  • Alter mount database failing: Intel SVR4 UNIX Error: 79: Value too large for defined data type

    Hi there,
    I am having a kind of weird issues with my oracle enterprise db which was perfectly working since 2009. After having had some trouble with my network switch (replaced the switch) the all network came back and all subnet devices are functioning perfect.
    This is an NFS for oracle db backup and the oracle is not starting in mount/alter etc.
    Here the details of my server:
    - SunOS 5.10 Generic_141445-09 i86pc i386 i86pc
    - Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
    - 38TB disk space (plenty free)
    - 4GB RAM
    And when I attempt to start the db, here the logs:
    Starting up ORACLE RDBMS Version: 10.2.0.2.0.
    System parameters with non-default values:
      processes                = 150
      shared_pool_size         = 209715200
      control_files            = /opt/oracle/oradata/CATL/control01.ctl, /opt/oracle/oradata/CATL/control02.ctl, /opt/oracle/oradata/CATL/control03.ctl
      db_cache_size            = 104857600
      compatible               = 10.2.0
      log_archive_dest         = /opt/oracle/oradata/CATL/archive
      log_buffer               = 2867200
      db_files                 = 80
      db_file_multiblock_read_count= 32
      undo_management          = AUTO
      global_names             = TRUE
      instance_name            = CATL
      parallel_max_servers     = 5
      background_dump_dest     = /opt/oracle/admin/CATL/bdump
      user_dump_dest           = /opt/oracle/admin/CATL/udump
      max_dump_file_size       = 10240
      core_dump_dest           = /opt/oracle/admin/CATL/cdump
      db_name                  = CATL
      open_cursors             = 300
    PMON started with pid=2, OS id=10751
    PSP0 started with pid=3, OS id=10753
    MMAN started with pid=4, OS id=10755
    DBW0 started with pid=5, OS id=10757
    LGWR started with pid=6, OS id=10759
    CKPT started with pid=7, OS id=10761
    SMON started with pid=8, OS id=10763
    RECO started with pid=9, OS id=10765
    MMON started with pid=10, OS id=10767
    MMNL started with pid=11, OS id=10769
    Thu Nov 28 05:49:02 2013
    ALTER DATABASE   MOUNT
    Thu Nov 28 05:49:02 2013
    ORA-00202: control file: '/opt/oracle/oradata/CATL/control01.ctl'
    ORA-27037: unable to obtain file status
    Intel SVR4 UNIX Error: 79: Value too large for defined data type
    Additional information: 45
    Trying to start db without mount it starts without issues:
    SQL> startup nomount
    ORACLE instance started.
    Total System Global Area  343932928 bytes
    Fixed Size                  1280132 bytes
    Variable Size             234882940 bytes
    Database Buffers          104857600 bytes
    Redo Buffers                2912256 bytes
    SQL>
    But when I try to mount or alter db:
    SQL> alter database mount;
    alter database mount
    ERROR at line 1:
    ORA-00205: error in identifying control file, check alert log for more info
    SQL>
    From the logs again:
    alter database mount
    Thu Nov 28 06:00:20 2013
    ORA-00202: control file: '/opt/oracle/oradata/CATL/control01.ctl'
    ORA-27037: unable to obtain file status
    Intel SVR4 UNIX Error: 79: Value too large for defined data type
    Additional information: 45
    Thu Nov 28 06:00:20 2013
    ORA-205 signalled during: alter database mount
    We have already checked in everywhere in the system, got oracle support as well without success. The control files are in the place and checked with strings, they are correct.
    Can somebody give a clue please?
    Maybe somebody had similar issue here....
    Thanks in advance.

    Did the touch to update the date, but no joy either....
    These are further logs, so maybe can give a clue:
    Wed Nov 20 05:58:27 2013
    Errors in file /opt/oracle/admin/CATL/bdump/catl_j000_7304.trc:
    ORA-12012: error on auto execute of job 5324
    ORA-27468: "SYS.PURGE_LOG" is locked by another process
    Sun Nov 24 20:13:40 2013
    Starting ORACLE instance (normal)
    control_files = /opt/oracle/oradata/CATL/control01.ctl, /opt/oracle/oradata/CATL/control02.ctl, /opt/oracle/oradata/CATL/control03.ctl
    Sun Nov 24 20:15:42 2013
    alter database mount
    Sun Nov 24 20:15:42 2013
    ORA-00202: control file: '/opt/oracle/oradata/CATL/control01.ctl'
    ORA-27037: unable to obtain file status
    Intel SVR4 UNIX Error: 79: Value too large for defined data type
    Additional information: 45
    Sun Nov 24 20:15:42 2013
    ORA-205 signalled during: alter database mount

  • 'Value too large for defined data type' error while running flexanlg

    While trying to run flexanlg to analyze my access log file I have received the following error:
    Could not open specified log file 'access': Value too large for defined data type
    The command I was running is
    ${iPLANET_HOME}/extras/flexanlg/flexanlg -F -x -n "Web Server" -i ${TMP_WEB_FILE} -o ${OUT_WEB_FILE} -c hnrfeuok -t s5m5h5 -l h30c+5 -p ctl
    Which should generate a html report of the web statistics
    The file has approx 7 Million entries and is 2.3G in size
    Ideas?

    I've concatenated several files together from my web servers as I wanted a single report, several reports based on individual web servers is no use.
    I'm running iWS 6.1 SP6 on Solaris 10, on a zoned T2000
    SunOS 10 Generic_118833-23 sun4v sparc SUNW,Sun-Fire-T200
    Cheers
    Chris

  • Error when try Specify User-Defined Text Types

    Hi all,
    I have a problem when I try to Specify User-Defined Text Types. The system gave me the error what is described below. Do you know how to solve a problem?
    F1
    Choose the key from the allowed namespace
    Message no. SV019
    Diagnosis
    You have attempted to create an entry and have used a key which is not in your namespace.
    This can cause problems in later upgrades because the entry could be overwritten by an import, or overwrite an existing entry.
    Procedure
    Check your entry and try to enter a key value from your namespace.
    You can display the namespace definition with RDDKOR54.
    If you must use the key entered, document your change so that it can be repeated after an upgrade or release change if necessary. If you put the data in a change request, you can export it before an upgrade or release change, and import it again afterwards.

    do you have more details or advice and so on?

  • Define table type on runtime...Getting Error..

    My requirement is to
    I am trying to define table type on runtime. i.e. ortf_in_table_tbl{noformat}({noformat}i).field_position_rec.ortf_segment_field_name in below code.
    But when I am executing below code and getting below error:
    DECLARE
       CURSOR field_position_cur (p_table_name VARCHAR2)
       IS
          SELECT xosf.field_name, xosf.starting_position, xosf.field_length
            FROM record_types xort, record_segments xors, segment_fields xosf
           WHERE xort.record_type_id = xors.record_type_id
             AND xors.record_segment_id = xosf.record_segment_id
             AND xosf.table_name = p_table_name;
       CURSOR raw_data_cur
       IS
          SELECT *
            FROM raw_data;
       TYPE raw_data_typ IS TABLE OF raw_data_cur%ROWTYPE
          INDEX BY BINARY_INTEGER;
       TYPE table_typ IS TABLE OF emp%ROWTYPE
          INDEX BY BINARY_INTEGER;
       table_tbl      table_typ;
       raw_data_tbl   raw_data_typ;
    BEGIN
       OPEN raw_data_cur;
       LOOP
          FETCH raw_data_cur
          BULK COLLECT INTO raw_data_tbl;
          EXIT WHEN raw_data_tbl.COUNT = 0;
          FOR i IN raw_data_tbl.FIRST .. raw_data_tbl.LAST
          LOOP
             FOR field_position_rec IN field_position_cur ('EMP')
             LOOP
                table_tbl (i).field_position_rec.field_name :=
                   SUBSTR (raw_data_tbl (i).raw_line_text,
                           field_position_rec.starting_position,
                           field_position_rec.field_length
                DBMS_OUTPUT.put_line
                        (   'table_tbl (i).field_position_rec.field_name '
                         || table_tbl (i).field_position_rec.field_name
             END LOOP;
          END LOOP;
       END LOOP;
       CLOSE raw_data_cur;
    FORALL i IN table_tbl.FIRST .. table_tbl.LAST
          INSERT INTO emp
               VALUES (table_tbl (i)
       COMMIT;
    EXCEPTION
       WHEN OTHERS
       THEN
          DBMS_OUTPUT.put_line ('OTHERS ' || SQLERRM);
    END;
    **ORA-06550: line 61, column 52:**
    **PLS-00302: component 'FIELD_POSITION_REC' must be declared**
    **ORA-06550: line 54, column 13:**
    **PL/SQL: Statement ignored**Here field_position_cur is giving me column name for the EMP table (i.e. field_position_rec.field_name) and field_position_cur is giving start and length to derive value of the that column
    i.e.
    SUBSTR (raw_data_tbl (i).raw_line_text,
                           field_position_rec.starting_position,
                           field_position_rec.field_length
                          )But it is giving me error. We are on 10g database.
    Please suggest the solution to it.
    Edited by: BluShadow on 12-Jan-2012 08:21
    added {noformat}{noformat} and other tags to make it readable.  Please read {message:id=9360002} and learn to do this yourself.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    piyushgupta wrote:
    My requirement is to
    I am trying to define table type on runtime. Please explain - it is not clear from the code what you are attempting.
    Also note that PL/SQL is strong typed language. This mean that you cannot define a variable using a weak type and at runtime change that into a formal data type.
    In Oracle, the abstract AnyData data type can be used for unknown data types - and methods exist that allows different data types to be stored and retrieved as AnyData types. Of course, there are overheads involved in using an abstract data type (implemented as an object class) like this.
    Another method is to use DBMS_SQL to create dynamic code (SQL or PL/SQL) - and perform dynamic binding (the bind determines the data type of the bind variable in the code). If the dynamic code is a SQL select, the describe interface enables you to determine the content (columns and data types) of the SQL projection.
    The final method that comes to mind is using a RTTI (Run Time Type Information) interface - something that is also supported by Oracle (and basically the backend implementation of answering a describe interface call). This is however a bit more complex and quite specialised and needs a very unique problem to justify it being used.

  • Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CR...

    Post Author: lkamesam
    CA Forum: Integrated Solutions
    Hi,
            I am running Crystal Reports version 10 from IBM Rational 6.0.1  build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
    Does any body have any clue how to resolve my problem? Thanks
    Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>&#91;0&#93; com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST &#91;1&#93; com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST &#91;2&#93; com.ibm.ws.classloader.ProtectionClassLoader@38e75786 &#91;3&#93; com.ibm.ws.bootstrap.ExtClassLoader@7e475784 &#91;4&#93; sun.misc.Launcher$AppClassLoader@7e5a5784 &#91;5&#93; sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) at

    For those who would have the same problem, here is how I could eventually fix it.
    Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
    Entry point :
    http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
    As suggested, I used the New Project wizard to create a new project, with :
    Application server type : J2EE
    Check the radio button "Use remote object access service : BlazeDS"
    Then, as indicated in following pages (section "Accessing BlazeDS")... :
    file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
    ...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
    There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
    Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
    Very nice product anyway, so far, congratulations...
    Rgds
    Marc.

  • Crm 7.0 webchannel ,define catalog type query

    Hi all,
    m facing a problem in webchannel (crm),if any of you can guide me in this regard, i would greatly appriciate it..the problem is :
    While performing "define catalog type" ,under the "Folder Template" tab when m trying to assign my newly created AREA & ITEM m getting the message "no values selected, maintain entries" & when i click yes m getting a window "choose customizing project". There is a button stating "continue w/o specifying project", if i click on that its taking me to "Define template for forlder" under basic functions in spro crm.I have already maintained folder for area & item which are saved then why are they not showing when m pressing f4.
    regards,
    Nitin

    I am assuming that your requirement is to create a new catalog type
    Normally, the CRM system comes with few standard catalog types - such as, AUTO and MANU. These catalog types usually have the respective "Areas" and "Items" predefined. For example, the Catalog type MANU has MANU-AREA and MANU-ITEM. The message here is, the standard system does come with several values predefined for these configuration tasks.
    Now, coming to your requirement, if you don't see any standard values in your configuration steps, then there is some issue you should look into.
    In your case, since no standard values are available for the "For Areas" and "For Items" - which actually should be in CRMD_KW_TEMPL table, I think you have to check if everything has been done correctly as far as the upgrade transport or installation transport goes.
    What is the version of CRM are you in? Though the following note is old, it is worth investigating.
    [Note 751751 - Content Management: Error TK295 in Customizing|https://service.sap.com/sap/support/notes/751751]

  • Define event types in Customizing and restart the transaction.

    how to define event to restart the transaction in BADI
    I have given error message in badi. it is giving
    No SAP Event Management communication for events; no event types def
        Message no. /SAPTRX/ASC084
    Diagnosis
        You have not defined event types for the business process types.
        therefore not possible to communicate event data to SAP Event
        Management.
    System response
        The communication of event data is aborted.
    Procedure
        Define event types in Customizing and restart the transaction.

    Hi Kevin,
    What DataSource does your testalias refer to?
    - If it is a custom DataSource, you must have created this custom DataSource also.
    - If it is the default DataSource, you shouldn't have this problem in general...
    In either case, you can try deploying your DataSource and/or DataSource alias together with your application:
    http://help.sap.com/saphelp_nwce10/helpdata/en/45/07d2eeea3e0485e10000000a155369/frameset.htm
    http://help.sap.com/saphelp_nwce10/helpdata/en/45/c82cd460a42e96e10000000a155369/frameset.htm
    I hope that helps!
    Regards,
    Yordan

  • Error with Exchange rate type

    Hello all,
    While releasing the billing document to accounting, getting the error:
    'An exchange rate type is not defined for country US'.
    In customer master, have maintained Exchange rate as 'M'.
    where do we maintain the exchange rate type for country.
    Thanks
    Gauravjit.

    HI Gauravjit,
    Try this:
    SPRO-F5- General Settings-Currencies-Define Translation ratos for currency translaction
    Reward if it helps
    regards
    Srini

  • DECODE SQL Function - Parsing error in Defining Objects in Universe Designe

    Hi,
    I have created a class and an object in BO XI R3 Universe designer.
    I am getting the parsing error while defining the object when using the custom SQL as
    select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE'),decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019)) as TYPE from wh_cf_cmsu
    The object Type is "character", i have tried with Long Text, Number, Date as well and the same sql works fine by returning String values through TOAD.
    Do we have any constrains in using DECODE in BO XI R3 or any other syntax please....
    Please guide me in resolving this issue.
    Thanks,
    Karthik.

    Hi,
    1.At back end check the data type for matteraction column and define it accordingly in object definition.
    2. Try to break your select clause definition into smaller parts and check it where the exact issue is  as below
    i.select decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019) ............
    ii.select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE') ..........
    iii.select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE'),decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019)) as TYPE from wh_cf_cmsu

  • Help with x64: fatal error LNK1112: module machine type 'X86' conflicts with target machine type 'x64'

    Hello, I am trying to complie some C code for some applications I am working on in labview (I am using Labview 2012 64bit).
    When I try to build my code in Visual C++ 2010 ( I have set it up to be able to use x64) I get the following fatal error:
    nivision.lib(StartupShutdown.obj) : fatal error LNK1112: module machine type 'X86' conflicts with target machine type 'x64'
    Which I understand that .lib does not have a 64bit compatability. However, if I were to use 32bit code, how can I link/emulate it to my 64bit labview? Is there a good tutorial on this application? The problem is the rest of my application uses and requires 64bit labview, so I am stuck in this enviroment.
    Thanks.

    dbrittain wrote:
    Thanks for the reply. The C code I have cross correlates images, and it does reference the image inputs and size variables from the nivision classes. I am thinking of using a side by side labview environment with shared variables. I have not done this before, do you have any good examples? Can you make the library function node a shared variable or only the elements within it? 
    I guess I could try to convert to labview, but the are a lot of lines of code that I would prefer not to try to wrap my head around in translation.
    The LabVIEW API in Vision Development Module has functions that let you get access to all those parameters as well as the raw image data pointer. A common design is to query those items on the LabVIEW diagram and then pass them to your DLL. This would mean you wouldn't need to make any calls into the Vision DLL from your C code.
    As for examples showing how to use shared variables, keep in mind that it isn't just like doing a function call. The more appropriate way to think of it would be communicating with another VI by getting and setting controls and indicators while it runs. You could put all your arguments into a shared variable and set a boolean indicating it is ready, then wait for another boolean to go high indicating the other code has finished and placed its results in another shared variable. Your application code interacts with the shared variables just like a control/indicator/local variable. This of course is a simple description and I would not be surprised if there are well-defined frameworks/examples searchable in the forums that use shared variables in this manner.
    Eric
    Eric

  • User-Defined Table Types - Where is it in SQL Server 2008?

    I am having 2 issues:
    1.  I don't see a folder for 'User-Defined Table Types' under programmability-->Types
    2.  When I execute the following code to create a Type; I get an error 'Incorrect syntax near the keyword 'AS'.'
    USE Locations;
    GO
    /* Create a user-defined table type */
    CREATE TYPE LocationTableType AS TABLE
    ( LocationName VARCHAR(50)
    , CostRate INT );
    GO

    Hi Shayann,
    The  user-defined table type is a new
    feature from SQL Server 2008. If you want to use it you have to upgrade your database to SQL Server 2008 or above.
    In you scenario(SQL Server 2005),as a workaround, you can use the  local temporary table instead. 
    --in SQL Server 2005
    CREATE TABLE tblType(id INT,name VARCHAR(99))
    GO
    CREATE PROC proc1
    AS
    BEGIN
    SELECT * FROM #temp;
    END
    GO
    SELECT * INTO #temp FROM tblType; -- the #temp name is fixed
    INSERT INTO #temp VALUES(1,'Eric');
    EXEC proc1
    --In SQL Server 2008 or above
    CREATE TYPE LocationTableType AS TABLE
    ( id INT,
    name VARCHAR(99) );
    GO
    CREATE PROC proc1 @t LocationTableType READONLY
    AS
    BEGIN
    SELECT * FROM @t
    END
    GO
    DECLARE @t LocationTableType;
    INSERT INTO @t VALUES(1,'Eric');
    EXEC proc1 @t
    I still suggest you upgrade to higher SQL Server.
    If you have any question, feel free to let me know.
    Best regards,
    Eric

  • [SOLVED] Value too large for defined data type in Geany over Samba

    Some months ago Geany started to output an error whith every attempt to open a file mounted in smbfs/cifs.
    The error was:
    Value too large for defined data type
    Now the error is solved thanks to a french user, Pierre, on Ubuntu's Launchpad:
    https://bugs.launchpad.net/ubuntu/+bug/ … comments/5
    The solution is to add this options to your smbfs/cifs mount options (in /etc/fstab for example):
    ,nounix,noserverino
    It works on Arch Linux up-to-date (2009-12-02)
    I've writed it on the ArchWiki too: http://wiki.archlinux.org/index.php/Sam … leshooting

    An update on the original bug. This is the direct link to launchpad bug 455122:
    https://bugs.launchpad.net/ubuntu/+sour … bug/455122

Maybe you are looking for

  • I cannot sync new playlists from iTunes PC to my iPhone

    I have read through many Apple support topics and how-tos, I have tried everything I can to get iTunes to copy over/ sync new playlists from my PC. Doesn't matter if I select manual choosing of music, or select individual playlists, update my prefere

  • Can Prelude use the MXF preview files instead of the full size files?

    It takes forever to load and view my full size MXF files from an XDCamHD disk. (It can also cause Prelude to crash)  It seems like it would be very helpful to be able to view the tiny preview files contained in the "Sub" folder.  You could quickly re

  • I cannot download the JDK

    I am unable to download the JDK 1.6 32-bit release #17. The sun download manager says "there is something wrong, contact support" and I am completely unable to download it and there is no message to help me otherwise. I also tried with Firefox and wi

  • DH video to online flash content

    I have adobe master suite and I have completed a project in Premiere that was using HD footage. How can I create a movie that would be small enough to use as an online movie? I have already tried doing it in Encore but the file was still 75 mb. I rea

  • W530 - 4 display question

    Reviewing the Lenovo website, I see it is advertised that the W530 can drive 4 displays. The mini-dock ad says it can handle any two displays. It is my guess that that 2 displays can be driven from the dock, and two from the W530 itself. Is this corr