J2CA0056I Exception in WAS

While running the soak test for our application, the following error was found in the SystemOut.log
[10/25/05 16:39:38:089 MST] 1d24403f ConnectionEve A J2CA0056I: The Connection Manager received a fatal connection error from the Resource Adaptor for resource JMS$BIDSQCF$JMSManagedConnection@1160003643. The exception which was received is javax.jms.JMSException: MQJMS2007: failed to send message to MQ queue
Can anyone let me know whats the cause for this exception and the solution?

We have the same problem, has anyone find the solution for it.
Many people suggests it's the size of the message but in our case it happens when volume of messages is higher

Similar Messages

The application, C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe, generated an application error The error occurred on 10/01/2009 @ 11:31:59.964 The exception generated was c0000005 at address 7C81BD02 (ntdll!ExpInterlockedPopEntrySListFault)

Hi,
I get this error randomly when i run my VB 6.0 application which calls Photoshop CS2 actions. I went through many forums, but could not manage to get the right solution for this.
"The application, C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe, generated an application error The error occurred on 10/01/2009 @ 11:31:59.964 The exception generated was c0000005 at address 7C81BD02 (ntdll!ExpInterlockedPopEntrySListFault)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
OS: WIndows Server 2003 SP2
Photoshop CS2
ANy help on this will be highly appreciated.
Thanks in advance,
Smiley

I see this sort of error notice in Bridge and Photoshop, preceded by the message " Photoshop (or Bridge) has encountered a problem and must close. Tell MS.
Yes or No."
It most frequently happens in PS when running Dfine 2.0. I have no clue what triggers the Bridge closure. It happens randomly.
CS3, so nobody gives a tinkers dam, I suppose.
I see this kind of message in software testing on a regular basis. Of course, when the test is under way, the software is generating a detailed log file which we package up as part of a bug report. Then at the bug scrubs, lively discussions ensue as to who has to fix what!
I can only image what would happen if the Dfine people and the PS people had to sit through one of those!

The exception 'CX_RSR_X_MESSAGE' was raised

Hi Forum,
i am using standard extractors 0co_om_wbs_6 loading data into ods i am not using any routines .when i trigered the load it is giving short dump with this error
<b>The exception 'CX_RSR_X_MESSAGE' was raised but was not caught at any stage in the call hierarchy.</b>
So plz comment on this issue.....

Hi Prathap,
Which version you are working on?
Go through the link http://documents.bmc.com/supportu/documents/07/07/50707/Output/TR4350_patch2.htm.
SAP has provided some patches for the same.
Hope it helps,
Sunil.

Exception 'CX_RSR_X_MESSAGE' was raised when doing the Change Run

Hi ,
Change Run is not happening and it is throwing runtime error "The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere along the call hierarchy."
When ever I am trying to "Monitor and Start Terminated Change Runs" the same error is happening.
Below is the error I see in the Job Log
Job started
Step 001 started (program RSDDS_AGGREGATES_MAINTAIN, variant &0000000000054, user ID)
SQL: 06.03.2009 09:55:59
TRUNCATE TABLE "/BI0/0600001776"
SQL-END: 06.03.2009 09:55:59 00:00:00
SQL: 06.03.2009 09:56:01
TRUNCATE TABLE "/BI0/0600001470"
SQL-END: 06.03.2009 09:56:01 00:00:00
ABAP/4 processor: UNCAUGHT_EXCEPTION
Job cancelled
Any help on this would be great
Thanks
Subbu

Hi,
I guess there was nothing to change with tht, the log was simply showing tht ur change run was performing on tht table....
Chk on which object ur running this? whether any load got failed for this...?
Now restart the same run from the EXECUTE button in the window of monitor and start terminated change runs..... i guess it may finish...
rgds,

Exception XADataSource was null

Greetings
I am using jdev 10.1.2 and when I run my program it works the first time, then if I rerun it without killing off the embedded OC4J I get hte following error
06/03/13 14:43:18 Error updating application current-workspace-app: Error initializing ejb-module; Exception XADataSource was null
this is quite annoying, does anyone know what causes this.
Thanks
troy

Hi,
PLease check the data-sources.xml:
<data-source class="com.evermind.sql.DriverManagerDataSource" name="OracleDS" location="jdbc/OracleCoreDS" xa-locatio
n="jdbc/xa/OracleXADS" ejb-location="jdbc/OracleDS" connection-driver="oracle.jdbc.driver.OracleDriver" username="scott" pass
word="tiger" url="jdbc:oracle:thin:@//localhost:1521/oracle.regress.rdbms.dev.us.oracle.com" inactivity-timeout="30"/>
<data-source location="jdbc/los" class="com.evermind.sql.DriverManagerDataSource" password="" max-connect-attempts=
"20" xa-location="jdbc/xa/los" ejb-location="jdbc/los" schema="<schema_name>" connection-driver="oracle.jdbc.driver.OracleDriver" us
ername="casuti" url="jdbc:oracle:thin:@//<ip:port>/<instance name>" name="jdbc/los"><description>jdbc/los</description></data-so
urce></data-sources>
Please suggest if this is correct?
Thanks

The exception 'CX_RSR_X_MESSAGE' was raised while loading the data

Hello SDNERS,
I am lworking in PA module, I have loaded the master data successfully, while loading th transaction data in 0PA_C01, it is taking too much time, when i debgug I am getting below Exception :-
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
Kindly suggest.
Thanks
Shalini

Hi Shalini
I have the same problem.
Note 1157796 apply for SAP BI release 700 and 710 only . what do you use SAP BI Release?
I install BI Release 701, so i solve the problem not yet.
Please help me the solution for this error.
Thanks

Io exception: socket was closed ????? Error 17002

Hi I am getting the following exception when connecting to Oracle 9i through JDBC...The code uses connection pooling initialized within a Lotus Domino Pooling and works great for about 8-12 tries and then starts erroring out....any help would be appreciated.
02/21/2002 08:50:27 PM Addin: Agent printing: Message: Io exception: socket was closed
02/21/2002 08:50:27 PM Addin: Agent printing: SQLState: null
02/21/2002 08:50:27 PM Addin: Agent printing: ErrorCode: 17002
02/21/2002 08:50:27 PM Addin: Agent error message: java.lang.NullPointerException
02/21/2002 08:50:27 PM Addin: Agent error message: at com.ext.connector.RelData.executeQuery(RelData.java:416)
02/21/2002 08:50:27 PM Addin: Agent error message: at com.ext.connector.Connector.open(Connector.java:487)
02/21/2002 08:50:27 PM Addin: Agent error message: at JavaAgent.NotesMain(JavaAgent.java:20)
02/21/2002 08:50:27 PM Addin: Agent error message: at lotus.domino.AgentBase.runNotes(AgentBase.java:160)
02/21/2002 08:50:27 PM Addin: Agent error message: at lotus.domino.NotesThread.run(NotesThread.java:203)

I don't see any error on the Oracle side which makes me suspect if Domino itself is shutting down the TCP socket as part of a scheduled task/background process. Domino uses JDK ver. 1.1.8. I have tried using both classes111.zip and classes12.zip separately. Also tried including the jdbc 2 jar file. Nothing seems to prevent the socket from getting closed abruptly. Any more suggestions are welcome.
Thanks,
Jacob.

ERROR : Exception "CX_RS_INPUT_INVALID" was raised while activating InfoSet.

Hey Guys,
I am getting an error while activating an InfoSet as:
"An exception has occurred which is explained in more detail below. The
exception, which is assigned to class 'CX_RS_INPUT_INVALID' was not caught and
therefore caused a runtime error. The reason for the exception is:
Inconsistent input parameter (parameter: <unknown>, value <unknown>)"
The Infoset consists of two InfoCubes.
An InfoCube containing quite a few characteristics as attributes on a field and one attribute having a compounding attribute as 0CALYEAR.
Attached is the screenshot of the error message.

Hi Bhaskar, It's a not clear error, but in this thread you could find the answer at the end. http://scn.sap.com/thread/2076907 Regards.

I'm getting exception index was out of bound how should i fix it ?

In a timer tick event i have:
private void timer1_Tick(object sender, EventArgs e)
if (htmlloaded == true)
try
uri = sourceUrlId + forumsIds[counter] + sourceUrlNumber + 1;
filename = uri.Substring(49);
webBrowser1.Navigate(uri);
htmlloaded = false;
timer1.Enabled = false;
counter++;
countpages++;
catch (Exception err)
string ttt = err.ToString();
if (countpages == numberofpages)
timer1.Stop();
The problem is that in the end forumsIds and counter have the same number. forumsIds have 574 items and in the end counter is 574 too. And counter should be allways less then the forumsIds.

Michael i solved it this way.
First i changed in the top of the form the variable counter to value 0 instead 1 so it will start as 0.
In the GetHtmls method where i used the index 0 first time i did:
uri = sourceUrlId + forumsIds[counter] + sourceUrlNumber + 1;
countpages ++;
counter ++;
So first time counter is 0 index 0 .
Then i move it up by one so now counter value is 1.
Now the timer tick event:
private void timer1_Tick(object sender, EventArgs e)
if (htmlloaded == true)
try
uri = sourceUrlId + forumsIds[counter] + sourceUrlNumber + 1;
filename = uri.Substring(49);
webBrowser1.Navigate(uri);
htmlloaded = false;
timer1.Enabled = false;
counter ++;
countpages ++;
if (counter == numberofforums)
timer1.Stop();
catch (Exception err)
string ttt = err.ToString();
So now counter is 1 i'm navigating then counter is 2 now it will navigate again when counter is 2.
Since i navigated first time once when it was 0 this is 3 times.
So now counter will be 3 and the numberofforums is also 3.
And in the document completed event i'm also checking if counter == numberofforums:
if (counter == numberofforums)
timer1.Stop();
else
timer1.Enabled = true;
If counter is not equal to numberofforums keep navigating once they are equal stop the timer and finish the navigations.
So in the end i started from index 0 (counter = 0 ) and navigated last time when counter was 2. That's 3 times navigations. And counter is now 3 and i navigated to 3 forums.
I hope i did it right at least it's working like i wanted i think.
Navigated 3 times and there are 3 forums so i think it's logic.

JSTL c:import tag exception on WAS 6.20

Hi all,
has anyone been able to use the c:import jstl 1.0 tag on WAS 6.20?
Everytime we access it it throws the following error:
Exception occurs while processing a request to the servlet: jsp.
javax.servlet.jsp.JspTagException: Since tag handler class org.apache.taglibs.standard.tag.el.core.ImportTag implements BodyTag, it can't return Tag.EVAL_BODY_INCLUDE
Most, if not all, other tags seem to work fine, just this one doesn't. The same testpage and jstl version works fine on other non-SAP J2EE engines we have tested it on.
Best Regards,
Kalle Pokkinen

Hi,
This answer is mostly for reference - see OSS 0371142 2004 "JSP Standard 1.2 versus 1.1" for details.
Best regards,
Todor

Exception CX_RS_STEP_FAILED was logged.

Hi Experts,
We are extracting the data for IS-U Sales Statistics (Delta created by Mass Activity) - 0UC_SALES_STATS_02 datasource in BQ2-001 BW Test System and IQ1-250 Source System.
We are able to extract the data in PSA and write-optimised DSO but from there when the DTP is pushing the data into the Infocube, we get two
errors:
1. Error while updating to target ZUCSA_C05 (type INFOCUBE)
2. Exception CX_RS_STEP_FAILED logged.
The point where it is terminating in the method (IF_RSBK_CMD_U~RECEIVE_DATAPACKAGE) is:
if l_subrc <> 0.
l_key = l_infocube.
---> raise exception type cx_rs_step_failed
exporting
textid = cx_rs_step_failed=>update
object = 'INFOCUBE'
key = l_key.
endif.
We have implemented notes 983135, 1012607 & 1022026 earlier to fix our datasource tranport errors which is documented in this message number
0000728315.
We are able to load successfully till the infocube in the BQ1 001 system where we did not implement the above mentioned notes.
In the request processing flow the query terminated at posting
component: In the target InfoCube: BW-BEX-OT-DBIF
The request ID for this error is: 166
Details:
BI70 SAP NetWeaver 2004s
Support Package 10
Any help in this regard is very much appreciated.
Thanks,
Chandu

Hai chandu,
I got the same exception CX_RS_FAILED logged by doing DTP load to Master data info object.
Please assist me how to resolve this Exception...
Thanks in Advance
Naresh

The exception 'CX_HRPA_INVALID_BUFFER_ACCESS' was raised

hi evryone,
I am working on Previous employer's Details. When i am going to create a new entry , its throwing this exception and 'pskey record already exists' is coming. But there is no as such record created b4. there is some problem with buffer clearance. I am not getting any clue. Please help me out.
Thank you in advance.

Hi Manu
I checked your thread regarding the error message "cx_hrpa_invalid_buffer_access" while accessing HR_INFOTYPE_OPERATION. I am also facing the same issue, which i am working on for last 2-3 days.
Could you please shed some light, if you remember how you solved this?
Did you just used Buffer initialize Function module to rectify this error?
Your help would be highly appreciated.
Thanks,
Harish.

Replace a string except it was replaced

Hey guys:
I met a big problem and would you guys do me a big favour?
I want to replace a part of a text String by some other Strings.
for example,I want to replace the String "ab" into "cd",and the String "cd" into "xx" from the text "abcdefg", and what I expected result is "cdxxefg",but if i call the method

You rperformance has been praiseworthy. Andthere's
no one else to blame but you :)I agree. And, may I please take the blame foryour
typo?It's a conspiracy... that space moved after I posted.
Blame it on... dunno who :)Got to let this poor OP get back to his/her thread, but , keep on blaming it on me. I am a conspiracy all on my own.
RD-R
� {�

PowerPivot refresh error with data feed from sharepoint list with empty exception information

Hi,
My Powpivot refreshing error seems to be different from what others already experienced.
Scenario:
Constructed an external data source in the format of Http://<server_IP>/sites/<mysitecollection>/_vti_bin/listdata.svc
selected one table with some of the needed columns in the next step
Create calculate colums etc.
Create pivot tables etc.
All worked well offline
Upload the workbook into PowerPivot Gallery
Reference it from a page through Excel Web Service webpart allowing manual refresh
The refresh always reports failure with the named external data source
I opend the log file in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS and located the following error messages:
ASPPHOST::ShowEngineError: Out of line object 'DataSource', referring to ID(s) 'f8939b694cae', has been specified but has not been used。The following exception occurred while the managed IDbCommand interface was being used: .
Please note in the above message, NO detailed exception message was given. In other words,
the exception information is empty.
I checked as many things as I possibly could includin the security accounts etc. All seem to be right. But this empty exception got me stuck here.
What could possibly go wrong? Any help will be appreciated.
Thanks.

Hello,
Here is a good article regarding Where to get information about data refresh failures for your reference, please see:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
In addition, which credential option you're configured for the PowerPivot data refresh in SharePoint farm? You can go through the following articles regarding configure the PowerPivot data refresh:
Configure the PowerPivot Unattended Data Refresh Account (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ff773327.aspx
Configure Stored Credentials for PowerPivot Data Refresh (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ee210671.aspx
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

An unexpected exception has been detected in native code outside the VM.

I thought that my problem had been solved yesterday when I managed to run my application with out getting "An unexpected exception has been detected in native code outside the VM."
I was told to uninstall "j2sdk1.4.1_02" and install my old version of 1.3.1 and then completely remove that (as i do not think i removed it correctly in the first place), then reinstall my new version again (j2sdk1.4.1_02). This appeared to work, and my application ran. However, today i planned to do more work on it and it errored again. I am getting the following error:
C:\Documents and Settings\Mike Costen\Desktop\Mar27d>java ImageViewerFrame
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6D1C369C
Function=Java_sun_awt_font_NativeFontWrapper_registerFonts+0x14BC
Library=C:\j2sdk1.4.1_02\jre\bin\fontmanager.dll
Current Java thread:
at sun.awt.font.NativeFontWrapper.registerFonts(Native Method)
- locked <06C15D48> (a java.lang.Class)
at sun.java2d.SunGraphicsEnvironment.addPathFonts(SunGraphicsEnvironment.java:736)
at sun.java2d.SunGraphicsEnvironment.registerFonts(SunGraphicsEnvironment.java:587)
at sun.java2d.SunGraphicsEnvironment.access$100(SunGraphicsEnvironment.java:49)
at sun.java2d.SunGraphicsEnvironment$2.run(SunGraphicsEnvironment.java:209)
at java.security.AccessController.doPrivileged(Native Method)
at sun.java2d.SunGraphicsEnvironment.loadFonts(SunGraphicsEnvironment.java:203)
- locked <02F948A0> (a sun.awt.Win32GraphicsEnvironment)
at sun.java2d.SunGraphicsEnvironment.mapFontName(SunGraphicsEnvironment.java:451)
at java.awt.Font.initializeFont(Font.java:313)
at java.awt.Font.<init>(Font.java:345)
at sun.awt.windows.WDesktopProperties.setFontProperty(WDesktopProperties.java:148)
- locked <02AE0000> (a sun.awt.windows.WDesktopProperties)
at sun.awt.windows.WDesktopProperties.getWindowsParameters(Native Method)
at sun.awt.windows.WDesktopProperties.<init>(WDesktopProperties.java:56)
at sun.awt.windows.WToolkit.initializeDesktopProperties(WToolkit.java:865)
at java.awt.Toolkit.getDesktopProperty(Toolkit.java:1533)
- locked <02F92380> (a sun.awt.windows.WToolkit)
at sun.awt.shell.ShellFolder.<clinit>(ShellFolder.java:171)
at javax.swing.filechooser.FileSystemView.getRoots(FileSystemView.java:324)
at javax.swing.filechooser.WindowsFileSystemView.getHomeDirectory(FileSystemView.java:625)
at javax.swing.plaf.metal.MetalFileChooserUI.installComponents(MetalFileChooserUI.java:213)
at javax.swing.plaf.basic.BasicFileChooserUI.installUI(BasicFileChooserUI.java:130)
at javax.swing.plaf.metal.MetalFileChooserUI.installUI(MetalFileChooserUI.java:152)
at javax.swing.JComponent.setUI(JComponent.java:449)
at javax.swing.JFileChooser.updateUI(JFileChooser.java:1700)
at javax.swing.JFileChooser.setup(JFileChooser.java:345)
at javax.swing.JFileChooser.<init>(JFileChooser.java:320)
at javax.swing.JFileChooser.<init>(JFileChooser.java:273)
at ImageViewerFrame.<init>(ImageViewerFrame.java:30)
at ImageViewerFrame.main(ImageViewerFrame.java:227)
Dynamic libraries:
0x00400000 - 0x00406000 C:\j2sdk1.4.1_02\bin\java.exe
0x77F50000 - 0x77FF7000 C:\WINDOWS\System32\ntdll.dll
0x77E60000 - 0x77F46000 C:\WINDOWS\system32\kernel32.dll
0x77DD0000 - 0x77E5D000 C:\WINDOWS\system32\ADVAPI32.dll
0x78000000 - 0x7807F000 C:\WINDOWS\system32\RPCRT4.dll
0x77C10000 - 0x77C63000 C:\WINDOWS\system32\MSVCRT.dll
0x6D340000 - 0x6D46A000 C:\j2sdk1.4.1_02\jre\bin\client\jvm.dll
0x77D40000 - 0x77DC6000 C:\WINDOWS\system32\USER32.dll
0x77C70000 - 0x77CB0000 C:\WINDOWS\system32\GDI32.dll
0x76B40000 - 0x76B6C000 C:\WINDOWS\System32\WINMM.dll
0x6D1E0000 - 0x6D1E7000 C:\j2sdk1.4.1_02\jre\bin\hpi.dll
0x6D310000 - 0x6D31E000 C:\j2sdk1.4.1_02\jre\bin\verify.dll
0x6D220000 - 0x6D239000 C:\j2sdk1.4.1_02\jre\bin\java.dll
0x6D330000 - 0x6D33D000 C:\j2sdk1.4.1_02\jre\bin\zip.dll
0x6D000000 - 0x6D105000 C:\j2sdk1.4.1_02\jre\bin\awt.dll
0x73000000 - 0x73023000 C:\WINDOWS\System32\WINSPOOL.DRV
0x76390000 - 0x763AC000 C:\WINDOWS\System32\IMM32.dll
0x771B0000 - 0x772D1000 C:\WINDOWS\system32\ole32.dll
0x6D190000 - 0x6D1E0000 C:\j2sdk1.4.1_02\jre\bin\fontmanager.dll
0x73760000 - 0x737A4000 C:\WINDOWS\System32\ddraw.dll
0x73BC0000 - 0x73BC6000 C:\WINDOWS\System32\DCIMAN32.dll
0x73940000 - 0x73A07000 C:\WINDOWS\System32\D3DIM700.DLL
0x76C90000 - 0x76CB2000 C:\WINDOWS\system32\imagehlp.dll
0x6D510000 - 0x6D58D000 C:\WINDOWS\system32\DBGHELP.dll
0x77C00000 - 0x77C07000 C:\WINDOWS\system32\VERSION.dll
0x76BF0000 - 0x76BFB000 C:\WINDOWS\System32\PSAPI.DLL
Local Time = Mon Mar 31 08:59:02 2003
Elapsed Time = 6
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1_02-b06 mixed mode)
# An error report file has been saved as hs_err_pid584.log.
# Please refer to the file for further information.
C:\Documents and Settings\Mike Costen\Desktop\Mar27d>
I am now not sure at all why my computer is doing this, as it worked yesterday...
Any light shed on this matter is much appreciated.
Thanks, Mike

Welcome to native code hell! The reason we all use Java is because
native code sucks. It is to be isolated and quarantined to the smallest
area possible.
File a TAR/SR. Maybe you just need a newer vesion of the OCI client
libraries on your machine. Maybe they are out of sync with the native
portion of the type-2 driver.
Say why you went from type-4 to type-2. In my opinion, unless you have
a very good reason, you should go back to the reliable java driver. Java
can't kill a JVM.
Good luck,
Joe Weinstein at BEA Systems

J2CA0056I Exception in WAS

Similar Messages

Maybe you are looking for