J2EE Cluster is not created during system copy.

Hi all,
Iu2019ve been trying to perform a system copy on our PI 7.0 sp14 test system & create a second system on the same server.
I used the standard Sapinst tools for this because it is a PI ABAP+JAVA system.
The copy process went smooth but after it finished I realized that the ABAP side has been installed correctly but when I tried running "SXMB_IFR" I saw that the system points me to the source system J2EE process.
Looking into the file system of the target system, I saw that under the path \usr\sap\<SID>\<Instance>\j2ee\cluster only the bootstrap folder exists. Of course that in the SAP MMC, you cannot see any J2EE process under the new system process list.
I tried using a newer sapinst but that didnu2019t help.
Anyone ever encounter anything like that?
Thanks for your help.
Regards,
Yoav Zilberman

He again,
Now i finally managed to make all the J2EE process work but i keep having issues with the "server0" process in both systems on the server.
the first system i starts works fine but the second one will get the error: [Thr 8944] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\XIQ\DVEBMGS00\exe\jvmx.jar ; (SID changes according to which system started first).
Thanks,
Yoav

Similar Messages

Holder-Position relationship not created during hiring in PA40

Hi,
I have an issue right now where the holder-position relationship was not created when I hired a new employee thru PA40. We could correct this via RHINTE00. However, we would like to know first before we run the program on what could be the probable cause why the relationship was not created. All infotype records of the employee were added successfully in the system, it is only the SP relationship in HRP1001 that was not created during hiring. I'm still trying to replicate it to find the probable cause but still no luck. It only occurred once (quite rare). Since we can't replicate it, may we know when or how the relationship will not be created?
Your response will be greatly appreciated. Thank you very much.
Regards,
Angelo

Hi Venkatesh, thanks for the reply.
Yes, the PLOGI - ORGA switch is set to X

Error at step Run ABAP Reports during system copy in HPUX

Hi experts,
During system copy from Prodcution to Development i am facing the following errror at step
Run ABAP Reports
INFO 2009-03-18 03:57:36
Information for application function INST_EXECUTE_REPORT copied to local Repository.
INFO 2009-03-18 03:57:36
Function module INST_EXECUTE_REPORT set successfully.
INFO 2009-03-18 03:57:36
Executing function call INST_EXECUTE_REPORT.
ERROR 2009-03-18 03:57:38
FRF-00025 Unable to call function. Error message: Exception condition "WRITE_FAILED" raised. .
INFO 2009-03-18 03:57:38
RFC connection closed.
ERROR 2009-03-18 03:57:38
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
ERROR 2009-03-18 03:57:38
FCO-00011 The step runRADDBDIF with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR .
Please let me know the solution
Thanks & Regards,
Arun

This seems to be related with permission to write in /usr/sap/trans
Read,
Re: Run ABAP Reports error during ECC 6.0 installation on Win2003 with Oracle
Exception condition "WRITE_FAILED" raised during installation 4.0
and
Install error at Phase 33
Regards
Juan

Formulas not copied during system copy

Hi All ,
Recently we copied non-prod quality system to create new Dev system. In the process we have realised that in transformations ,formulas havent been copied to the new system .This is resulting in Processs chains failing with error "Assertion failed"
Has anybody faced such an issue before . Would appreciate all your help.
Thanks

Hi Krbas,
Make sure you did all the post processing activities after system copy. I doubt you missed some post processing activities related to CO after your system copy.
regards,
VInodh.

Jlaunch process is not running aftre system copy

Dear All,
I am having EP Production server, which is on SGeSAP Cluster. We are planning to remove the cluster and move the EP Production to a standalone server. So we planned to do a system copy po this server.
I have done a system copy of EP Production server, after doing the system copy, database and SAP instance is getting started without any problem in the new server, but processes related to java is not getting started.
dev_jcontrol:
trc file: "/usr/sap/EPP/JC00/work/dev_jcontrol", trc level: 1, release: "700"
node name   : jcontrol
pid         : 4109
system name : EPP
system nr. : 00
started at : Thu Oct 23 11:15:31 2008
arguments         :
          arg[00] : jc.sapEPP_JC00
          arg[01] : pf=/usr/sap/EPP/SYS/profile/EPP_JC00_epprdeol
[Thr 1] Thu Oct 23 11:15:31 2008
[Thr 1] *** WARNING => INFO: Unknown property [instance.box.number=EPPJC00epprdeol] [jstartxx_mt. 840]
[Thr 1] *** WARNING => INFO: Unknown property [instance.en.host=epprdeol] [jstartxx_mt. 840]
[Thr 1] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx_mt. 840]
[Thr 1] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx_mt. 840]
JStartupReadInstanceProperties: read instance properties [/usr/sap/EPP/JC00/j2ee/cluster/instance.properties:/usr/sap/EPP/JC0
0/SDM/program/config/sdm_jstartup.properties]
-> ms host    : epprdeol
-> ms port    : 3901
-> OS libs    : /usr/sap/EPP/JC00/j2ee/os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : /usr/sap/EPP/JC00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/EPP/JC00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host    : epprdeol
-> ms port    : 3901
-> os libs    : /usr/sap/EPP/JC00/j2ee/os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : /usr/sap/EPP/JC00/j2ee/cluster/instance.properties
-> [01] bootstrap_ID9437700 : /usr/sap/EPP/JC00/j2ee/cluster/instance.properties
-> [02] bootstrap_ID9437750 : /usr/sap/EPP/JC00/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID9437700            : /usr/sap/EPP/JC00/j2ee/cluster/instance.properties
-> [01] ID9437750            : /usr/sap/EPP/JC00/j2ee/cluster/instance.properties
-> [02] sdm                  : /usr/sap/EPP/JC00/SDM/program/config/sdm_jstartup.properties
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 1] [Node: bootstrap] java home is set by profile parameter
        Java Home: /opt/java1.4
[Thr 1] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/EPP/JC00/work/jstartup.jar
[Thr 1] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/EPP/JC00/work/jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name          : bootstrap
-> node type          : bootstrap
-> node execute       : yes
-> java path          : /opt/java1.4
-> java parameters    : -Djco.jarm=1
-> java vm version    : 1.4.2 1.4.2.17-071106-10:49-IA64W IA64W
-> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Hewlett-Packard Company)
-> java vm type       : server
-> java vm cpu        : IA64W
-> heap size          : 256M
-> root path          : /usr/sap/EPP/JC00/j2ee/cluster
-> class path         : ./bootstrap/launcher.jar
-> OS libs path       : /usr/sap/EPP/JC00/j2ee/os_libs
-> main class         : com.sap.engine.offline.OfflineToolStart
-> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path     : /usr/sap/EPP/JC00/work/jstartup.jar:/usr/sap/EPP/JC00/work/jvmx.jar
-> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0094377
-> debuggable         : yes
-> debug mode         : no
-> debug port         : 60000
-> shutdown timeout   : 120000
JControlStartJLaunch: program = /usr/sap/EPP/JC00/exe/jlaunch
-> arg[00] = /usr/sap/EPP/JC00/exe/jlaunch
-> arg[01] = pf=/usr/sap/EPP/SYS/profile/EPP_JC00_epprdeol
-> arg[02] = -DSAPINFO=EPP_00_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=/usr/sap/EPP/JC00/j2ee/cluster/instance.properties
-> arg[05] = -syncSem=2079
-> arg[06] = -nodeName=bootstrap
-> arg[07] = -jvmOutFile=/usr/sap/EPP/JC00/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/EPP/JC00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/EPP/JC00/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/EPP/SYS/profile/EPP_JC00_epprdeol
-> lib path = LD_LIBRARY_PATH=/opt/java1.4/jre/lib/IA64W:/opt/java1.4/jre/lib/IA64W/server:/opt/java1.4/jre/../lib/IA64W:/usr
/sap/EPP/JC00/exe::/usr/sap/EPP/JC00/exe:/usr/sap/EPP/JC00/exe:/tmp/sapinst_exe.4779.1223729040:/usr/sap/EPP/SYS/exe/run:/ora
cle/client/10x_64/instantclient:/usr/lib:/usr/sap/EPP/JC00/j2ee/os_libs:/usr/sap/EPP/JC00/exe:
-> exe path = PATH=/opt/java1.4/bin:/usr/sap/EPP/JC00/j2ee/os_libs:/oracle/EPP/102_64/bin:/opt/java1.4/bin:.:/home/eppadm:/us
r/sap/EPP/SYS/exe/run:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/contrib/Q4/bin:/opt/perl/bin:/opt/hparray/bin:/opt/nettladm
/bin:/opt/fcms/bin:/usr/contrib/kwdb/bin:/usr/bin/X11:/opt/graphics/common/bin:/opt/upgrade/bin:/opt/ipf/bin:/opt/wbem/bin:/o
pt/wbem/sbin:/opt/resmon/bin:/opt/hpsmh/bin:/opt/gwlm/bin:/opt/gvsd/bin:/opt/sas/bin:/opt/sec_mgmt/bastille/bin:/opt/dsau/bin
:/opt/dsau/sbin:/opt/firefox:/opt/gnome/bin:/opt/ignite/bin:/opt/mozilla:/opt/perl_32/bin:/opt/perl_64/bin:/opt/sec_mgmt/spc/
bin:/opt/ssh/bin:/opt/swa/bin:/opt/thunderbird:/opt/drd/bin:/opt/sfm/bin:/usr/contrib/bin/X11
[Thr 1] JStartupICreateProcess: fork process (pid 4114)
[Thr 1] Thu Oct 23 11:15:34 2008
[Thr 1] *** ERROR => invalid return code of process [bootstrap] (exitcode = 66) [jstartxx_mt. 1641]
[Thr 1] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = 66)
[Thr 1] JControlCloseProgram: started (exitcode = 66)
[Thr 1] JControlCloseProgram: good bye... (exitcode = 66)
Regards,
Ranjith

Hi,
Thanks for your reply.
dev_bootstrap log file is as below.
trc file: "/usr/sap/EPP/JC00/work/dev_bootstrap", trc level: 1, release: "700"
node name   : bootstrap
pid         : 7597
system name : EPP
system nr. : 00
started at : Thu Oct 23 12:19:18 2008
arguments         :
          arg[00] : /usr/sap/EPP/JC00/exe/jlaunch
          arg[01] : pf=/usr/sap/EPP/SYS/profile/EPP_JC00_epprdeol
          arg[02] : -DSAPINFO=EPP_00_bootstrap
          arg[03] : pf=/usr/sap/EPP/SYS/profile/EPP_JC00_epprdeol
[Thr 1] Thu Oct 23 12:19:18 2008
[Thr 1] *** WARNING => INFO: Unknown property [instance.box.number=EPPJC00epprdeol] [jstartxx_mt. 840]
[Thr 1] *** WARNING => INFO: Unknown property [instance.en.host=epprdeol] [jstartxx_mt. 840]
[Thr 1] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx_mt. 840]
[Thr 1] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx_mt. 840]
JStartupReadInstanceProperties: read instance properties [/usr/sap/EPP/JC00/j2ee/cluster/instance.properties]
-> ms host    : epprdeol
-> ms port    : 3901
-> OS libs    : /usr/sap/EPP/JC00/j2ee/os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : /usr/sap/EPP/JC00/j2ee/cluster/instance.properties
Instance properties
-> ms host    : epprdeol
-> ms port    : 3901
-> os libs    : /usr/sap/EPP/JC00/j2ee/os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : /usr/sap/EPP/JC00/j2ee/cluster/instance.properties
-> [01] bootstrap_ID9437700 : /usr/sap/EPP/JC00/j2ee/cluster/instance.properties
-> [02] bootstrap_ID9437750 : /usr/sap/EPP/JC00/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID9437700            : /usr/sap/EPP/JC00/j2ee/cluster/instance.properties
-> [01] ID9437750            : /usr/sap/EPP/JC00/j2ee/cluster/instance.properties
[Thr 1] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 1] JLaunchRequestQueueInit: create pipe listener thread
[Thr 2] JLaunchRequestFunc: Thread 2 started as listener thread for np messages.
[Thr 3] WaitSyncSemThread: Thread 3 started as semaphore monitor thread.
[Thr 1] Thu Oct 23 12:19:19 2008
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 1] CPIC (version=700.2006.09.13)
[Thr 1] [Node: bootstrap] java home is set by profile parameter
        Java Home: /opt/java1.4
[Thr 1] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/EPP/JC00/exe/jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name          : bootstrap
-> node type          : bootstrap
-> node execute       : yes
-> java path          : /opt/java1.4
-> java parameters    : -Djco.jarm=1
-> java vm version    : 1.4.2 1.4.2.17-071106-10:49-IA64W IA64W
-> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Hewlett-Packard Company)
-> java vm type       : server
-> java vm cpu        : IA64W
-> heap size          : 256M
-> root path          : /usr/sap/EPP/JC00/j2ee/cluster
-> class path         : ./bootstrap/launcher.jar
-> OS libs path       : /usr/sap/EPP/JC00/j2ee/os_libs
-> main class         : com.sap.engine.offline.OfflineToolStart
-> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path     : /usr/sap/EPP/JC00/exe/jstartup.jar:/usr/sap/EPP/JC00/exe/jvmx.jar
-> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0094377
-> debuggable         : yes
-> debug mode         : no
-> debug port         : 60000
-> shutdown timeout   : 120000
[Thr 4] JLaunchIStartFunc: Thread 4 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [bootstrap]
-> stack   : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djco.jarm=1
-> arg[ 4]: -Dsys.global.dir=/usr/sap/EPP/SYS/global
-> arg[ 5]: -Dapplication.home=/usr/sap/EPP/JC00/exe
-> arg[ 6]: -Djava.class.path=/usr/sap/EPP/JC00/exe/jstartup.jar:/usr/sap/EPP/JC00/exe/jvmx.jar:./bootstrap/launcher.jar
-> arg[ 7]: -Djava.library.path=/opt/java1.4/jre/lib/IA64W:/opt/java1.4/jre/lib/IA64W/server:/opt/java1.4/jre/../lib/IA64W:/
usr/sap/EPP/JC00/exe::/usr/sap/EPP/JC00/exe:/usr/sap/EPP/JC00/exe:/tmp/sapinst_exe.4779.1223729040:/usr/sap/EPP/SYS/exe/run:/
oracle/client/10x_64/instantclient:/usr/lib:/usr/sap/EPP/JC00/j2ee/os_libs:/usr/sap/EPP/JC00/exe:
-> arg[ 8]: -Dmemory.manager=256M
-> arg[ 9]: -Xmx256M
-> arg[ 10]: -DLoadBalanceRestricted=no
-> arg[ 11]: -Djstartup.mode=BOOTSTRAP
-> arg[ 12]: -Djstartup.ownProcessId=7597
-> arg[ 13]: -Djstartup.ownHardwareId=U0102446091
-> arg[ 14]: -Djstartup.whoami=bootstrap
-> arg[ 15]: -Djstartup.debuggable=yes
-> arg[ 16]: -DSAPINFO=EPP_00_bootstrap
-> arg[ 17]: -DSAPSTARTUP=1
-> arg[ 18]: -DSAPSYSTEM=00
-> arg[ 19]: -DSAPSYSTEMNAME=EPP
-> arg[ 20]: -DSAPMYNAME=epprdeol_EPP_00
-> arg[ 21]: -DSAPDBHOST=epprdeol
-> arg[ 22]: -Dj2ee.dbhost=epprdeol
[Thr 4] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [bootstrap]
-> arg[ 0]: com.sap.engine.bootstrap.Bootstrap
-> arg[ 1]: ./bootstrap
-> arg[ 2]: ID0094377
[Thr 4] Thu Oct 23 12:19:20 2008
[Thr 4] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 6] Thu Oct 23 12:19:21 2008
[Thr 6] JLaunchIExitJava: exit hook is called (rc = 66)
[Thr 6] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 6] SigISetIgnoreAction : SIG_IGN for signal 18
[Thr 6] JLaunchCloseProgram: good bye (exitcode = 66)
Regards,
Ranjith

Note 585277 - iSeries: System Copy - SDM Export?

Hello,
Can someone explain why it's necessary to do an SDM export as part of this process? I got to thinking, if we were in a position where we needed to recover from a hardware failure, we wouldn't have an SDM export to use to rebuild the system. Is this something we should be exporting / saving with our daily backups? Or if we have it exported / saved once is that sufficient? Thank you.
~TJ

> So in a disaster, if I want to rebuild the system, where would I get the SDM export from? We backup the pieces of the IFS during our daily backups (along with the abap / java database), but it's not packaged as a nice export. If we needed to restore, could we use the IFS backup, or would we have to have that stored as an SDM export?
Basically you need to backup everything under /usr/sap/<SID>/.../j2ee, which you can restore if you can make sure the part in the database and the filesystem are "in sync" - means e. g. no deployments/changes during the backup of both.
> If we can use the backup of the IFS to do a restore, in the event of a disaster, why can't we use it in the case of a system copy?
Because Java clutters all information about hostname, SID, database connectivity etc. in .properties files on the filesystem and in the database. What is stored where and synchronized during startup of the engine is not really documented and is application dependent (a portal has more/different .properties files than a plain empty J2EE instance). This is also a reason why it's e. g. not that easy to just change a hostname of a Java instance.
If you do the export using sapinst in case of a system copy, it packs them together and at import time sapinst does the magic to replace all the necessary entries of hostname and sid and cluster ID etc. automatically for the new built instance.
Markus

DB Error during System Copy Import

Hello,
We are currently doing a heterogeneous system copy of an internal Solution Manager
7.01 (running on Linux SLES10 SP2 64Bit) to a new machine (running on
Linux SLES11 SP1 64Bit). The database we are using on both side is MaxDB.
During the export phase, nothing went wrong. The pre and post requisites were implemented.
But during the import phase with sapinst and more especially during the 'import ABAP' step we are facing the following errors.
__SAPDFACT.log :__
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 26, table "/BI0/F0SMD_PI2H"
DbSl Trace: EXECUTE on connection 0, rc=-7055 (POS(59) Column(s) already
indexed:/BI0/E0CCMARCDH~P)
ERROR : Execute for create index /BI0/E0CCMARCDH~P on /BI0/E0CCMARCDH
failed (dbrc=99).
(SQL error -7055)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "/BI0/E0CCMARCDH~P" ON "/BI0/E0CCMARCDH" (
"KEY_0CCMARCDHP" , "KEY_0CCMARCDHT" , "KEY_0CCMARCDHU" ,
"KEY_0CCMARCDH1" , "KEY_0CCMARCDH2" , "KEY_0CCMARCDH3" ,
"KEY_0CCMARCDH4" , "KEY_0CCMARCDH5" , "KEY_0CCMARCDH6" ,
"KEY_0CCMARCDH7" , "KEY_0CCMARCDH8" , "KEY_0CCMARCDH9" ,
"KEY_0CCMARCDHB" )
SAPAPPL1.log :
(DB) ERROR: DDL statement failed
(DROP INDEX "/TMWFLOW/TRORDHT~1" ON "/TMWFLOW/TRORDHT")
DbSlExecute: rc = 103
(SQL error -4011)
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: EXECUTE on connection 0, rc=-7055 (POS(59) Column(s) already
indexed:/BI0/E0CCMARCDH~P)
ERROR : Execute for create index /BI0/E0CCMARCDH~P on /BI0/E0CCMARCDH
failed (dbrc=99).
(SQL error -7055)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "/BI0/E0CCMARCDH~P" ON "/BI0/E0CCMARCDH" (
"KEY_0CCMARCDHP" , "KEY_0CCMARCDHT" , "KEY_0CCMARCDHU" ,
"KEY_0CCMARCDH1" , "KEY_0CCMARCDH2" , "KEY_0CCMARCDH3" ,
"KEY_0CCMARCDH4" , "KEY_0CCMARCDH5" , "KEY_0CCMARCDH6" ,
"KEY_0CCMARCDH7" , "KEY_0CCMARCDH8" , "KEY_0CCMARCDH9" ,
"KEY_0CCMARCDHB" )
Before the export we executed the report for the DDL migration, created
the right *.sql files. We copied those sql files in the right folder
according to note 771209 and the System Copy guide.
We also tried to implement note 942540 - System copy fails on SAPDFACT
import, but we are not able to drop the mentioned tables. We are
getting 'unknown tables' whereas we see them in DB.
We would like to avoid restarting the export and import phases from the beggining as there is approximately 80GB to transfer each time and we are not running this on a server but desktop PC.
Any help would be appreciated.
Thanks in advance
Regards,
Johann

Hello Andreas
thank you for your answer. However, the table specified in the Note is not found when I am running the specified request in the correct schema:
-4004: POS(16) Unknown table name:/MAXDB/INDEXSTATEMENTS SQLSTATE: 42000
SAP_BW component in Solution Manager 7.01 SPS24 is SAPKW70106. As this BW release is already more recent than the one recommended in the Note, this issue should not be link to an old BW component patch version then.
In the meantime, I have applied Notes 888210 and 942540. But I cannot drop the tables specified since the user SAPSMJ has no DROPIN privilege and I cannot grant them even when using SUPERDBA user.
So I think we need to re-run the export as we are running out of options to try continuing the import phase.
Regarding the use of last R3load release, would you know the path to download it on the marketplace and if I need the last R3load kernel version (7.3) or only the last patch for 7.01 and knowing that I am using Netweaver 7.01 packages for the copy ? R3load used so far is 7.01/V1.4.
Thanks and Regards,
Johann

SSO to R3 not working after system copy

Hi Experts,
Recently our QA R3 client XXX was deleted and the whole system was rebuild using system copy of client ZZZ of R3 production. Now we had to reconfigure the SSO between portal and QA R3 with the new client.
But it is not working. It was found that the QA R3's own self signed certificate shows CN=ERP (same as R3 Prod) and not ERU as it should have been. We changed the CN value to ERP,in Visual Admin (Services ->key storage , Ticket ). Still the result is same.
How to re-generate the self signed certificate in R3 with CN=ERU ?
or a workaround for this problem.
Regards
Jimmy

HI Jayendra
Recreate the saplogonticketkeypair following the procedure outlined here
http://help.sap.com/saphelp_nw70/helpdata/en/75/c80b424c6cc717e10000000a155106/content.htm
Then you can export the SAPLogonticketkeypair-cert (public key certificate) of the Java AS and import it into the target ABAP system
Important: the following two steps must be done in the ABAP client that will receive the logon tickets i.e the ABAP client that the component/application on the Java AS is configured to connect to e.g the client specified in the portal iview properties or the client specified in a Web Dynpro JCo Destination
(1) Import the public-key certificate of the Java AS into the ABAP systems certificate list using transaction STRUSTSSO2
(2) Add the certificate to access control list
When adding the certificate to the ACL the SID should be set to the SID of the ticket issuing Java AS and the client should be set to the client that the Java AS is writing to the logon tickets i.e the value of login.ticket_client in the Java AS
Remember, in an Add-In installation, where the system IDs are the same, you must change the default client for the J2EE Engine (000) to a client that does not exist on the SAP Web AS ABAP system e.g change login.ticket_client to 999
See: http://help.sap.com/saphelp_nw70/helpdata/en/cb/ac3d41a5a9ef23e10000000a155106/content.htm
The reason for this change is that the system ID and client combination must be unique when tickets are to be accepted by an SAP Web AS ABAP system
By the way it is better to start a new thread with your question rather than bumping a thread that was already set to 'answered'

Issue with secure store key phrase during system copy export

Hi,
We recently upgraded our all production portals to SAP NW 7.31 SP7
(Migrated them from windows to Linux).
While taking the export in production portals, we are stuck at a stage
while defining parameters.
We did not move further if we tried the all the passwords at this stage.
We ran the key phrase check tool and found the key phrase we are
supplying is correct with the below command that tells us on the
sapinst screen
'<global directory>/sltools/checkKeyPhrase(.sh) -f <global
directory>/security/data/SecStore.properties'.
so the problem is not with the key phrase
We are stuck with system copy export as our refresh is halted because
of this issue.Screenshot is attached.
sapinst.log
'/usr/sap/put/usages_data_P0P.1.xml'.
INFO 2014-03-21 12:29:01.742
Copied file '/usr/sap/put/usages_data_P0P.xml' to '/usr/sap/put/usages_data_P0P.2.xml'.
INFO 2014-03-21 12:29:04.919
Working directory changed to /usr/sap/put.
INFO 2014-03-21 12:29:05.10
Execute step getUsageTypes of component |NW_Export|ind|ind|ind|ind|0|0|NW_Java_Export_Dialog|ind|ind|ind|ind|javaUnload|0|NW_JAVA_Export_PREPARE|ind|ind|ind|ind|prep|0
INFO 2014-03-21 12:29:05.757
Working directory changed to /usr/sap/put.
INFO 2014-03-21 12:29:05.777
Execute step dss_checkForPI of component |NW_Export|ind|ind|ind|ind|0|0|NW_Java_Export_Dialog|ind|ind|ind|ind|javaUnload|0|NW_JAVA_Export_PREPARE|ind|ind|ind|ind|prep|0
INFO 2014-03-21 12:29:05.887
Working directory changed to /usr/sap/put.
INFO 2014-03-21 12:29:05.907
Execute step checkKeyPhrase of component |NW_Export|ind|ind|ind|ind|0|0|NW_Java_Export_Dialog|ind|ind|ind|ind|javaUnload|0|NW_JAVA_Export_PREPARE|ind|ind|ind|ind|prep|0
INFO 2014-03-21 12:29:26.291
Effective group id set to 202.
WARNING 2014-03-21 12:29:26.310
Execution of the command "/bin/csh -c "source /home/p0padm/.cshrc; env"" finished with return code 100. Output:
INFO 2014-03-21 12:29:26.291 [syuxccuren.cpp:285]
 CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
 lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:29:26.318
Creating file /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:29:26.409
Output of /usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask is written to the logfile /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:29:26.414
Effective group id set to 202.
WARNING 2014-03-21 12:29:26.434
Execution of the command "/usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask" finished with return code 100. Output:
INFO 2014-03-21 12:29:26.414 [syuxccuren.cpp:285]
 CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
 lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:38:17.491
Effective group id set to 202.
WARNING 2014-03-21 12:38:17.512
Execution of the command "/bin/csh -c "source /home/p0padm/.cshrc; env"" finished with return code 100. Output:
INFO 2014-03-21 12:38:17.491 [syuxccuren.cpp:285]
 CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
 lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:38:17.527
Creating file /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:38:17.618
Output of /usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask is written to the logfile /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:38:17.626
Effective group id set to 202.
WARNING 2014-03-21 12:38:17.647
Execution of the command "/usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask" finished with return code 100. Output:
INFO 2014-03-21 12:38:17.626 [syuxccuren.cpp:285]
 CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
 lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:43:38.969
Effective group id set to 202.
WARNING 2014-03-21 12:43:38.992
Execution of the command "/bin/csh -c "source /home/p0padm/.cshrc; env"" finished with return code 100. Output:
INFO 2014-03-21 12:43:38.969 [syuxccuren.cpp:285]
 CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
 lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:43:39.6
Creating file /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:43:39.101
Output of /usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask is written to the logfile /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:43:39.113
Effective group id set to 202.
WARNING 2014-03-21 12:43:39.140
Execution of the command "/usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask" finished with return code 100. Output:
INFO 2014-03-21 12:43:39.113 [syuxccuren.cpp:285]
 CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
 lib=syslib module=syslib
Effective group id set to 202.
sapinst_dev.log
TRACE
2014-03-21 12:43:39.67 [syuxcuser.cpp:643]
PSyGroupImpl CSyUserImpl::getPrimaryGroup()const
lib=syslib module=syslib
account user="p0padm" uid="390" exists with parameter gid="301"
TRACE
2014-03-21 12:43:39.87 [syuxcuser.cpp:643]
PSyGroupImpl CSyUserImpl::getPrimaryGroup()const
lib=syslib module=syslib
account user="p0padm" uid="390" exists with parameter gid="301"
TRACE
2014-03-21 12:43:39.97 [syuxctask.cpp:270]
CChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 20950
INFO
2014-03-21 12:43:39.101
CJSlibModule::writeInfo_impl()
Output of /usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask is written to the logfile /usr/sap/put/checkKeyPhrase.log.
INFO
2014-03-21 12:43:39.113 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
TRACE
2014-03-21 12:43:39.137 [syuxctask.cpp:880]
CUnixProcessManager::sap_waitpid(pid_t pid, int * pStatus, int options)
lib=syslib module=syslib
Child process 20950 returned 100
WARNING
2014-03-21 12:43:39.140
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask" finished with return code 100. Output:
INFO
2014-03-21 12:43:39.113 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
TRACE
2014-03-21 12:43:39.140
check key phrase returns: 100
TRACE
2014-03-21 12:43:39.141
NWException thrown: nw.syscopy.java.secStoreFSException:
Error checking key phrase, see output of log file '/usr/sap/put/checkKeyPhrase.log'.
TRACE
2014-03-21 12:43:39.142
Function setMessageIdOfExceptionMessage: nw.syscopy.java.secStoreFSException but already set to nw.syscopy.java.secStoreFSException
TRACE
2014-03-21 12:43:39.269 [iaxxgenimp.cpp:660]
CGuiEngineImp::showMessageBox
Error checking key phrase, see output of log file '/usr/sap/put/checkKeyPhrase.log'.
TRACE
2014-03-21 12:43:39.270 [iaxxgenimp.cpp:1137]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE
2014-03-21 12:43:42.489 [iaxxdlghnd.cpp:165]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE
2014-03-21 12:43:42.490 [iaxxcnclhd.cpp:158]
CCancelHandler::doHandleDoc(IDialogDocument * pDoc )
CCancelHandler: ACTION_ERROR received
TRACE
2014-03-21 12:43:42.490 [iaxxgenimp.cpp:1137]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
CheckKeyPhrase.log
INFO
2014-03-21 12:43:39.113 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
Logs are attached.Request you to please have a look on this with priority.
Regards,
Sudheer.

Hi Sudheer,
You need to provide the keyphrase correctly.
<global directory>/sltools/checkKeyPhrase(.sh) -f <global
directory>/security/data/SecStore.properties'.
If you don't know the keyphrase...ten change it in configtool and take a restart of the system since you have the downtime with you.
Activating Secure Storage in the File System (SAP Library - System Security)
With Regards
Ashutosh Chaturvedi

Dialog Instances Java are not up after System Copy NW2004s SR2 ABAP+JAVA

Hello guys,
I have just performed a system copy of our BW system (douple stack NW2004s) wich consists from CI and 2 DIs. First I made an export using SAPINST (Software from SAP_BUSINESS_SUITE_2005_SR2 for sparc solaris), where I choosed in SAP Installation Master->SAp Netweaver 2004s Support Release 2->Additional Software Life-cycle Tasks->System Copy->Oracle->Source System->Central System->Based on ABAP and Java->Database and Central Instance Export. I couldn't find any special task for export java from my dialog instances, so I thought it would be ok like that. Then I used the same software on my target system, choosed ...Additional Software Life-cycle Tasks->System Copy->Oracle->Target System->Central System->Based on ABAP and Java->Central System Installation. In the Dialog input phase of SAPINST I indicated that use db specific tools to copy your database. So I made the database restore+recovery with our DB tools and continued withthe SAPINST and Import.
Afterwards the ABAP part and Java on the central Instance run perfect, but Java Stack is not up by both of Dialog Instances. I have checked the configtool on the server where the CI is running (the DIs are running on different linux servers) and couldn't see any entries for my dialog instances, only the CI was seable there. I tried to start configtool from the application server, but there I could find only the file config.properties in the directory /usr/sap/<SID>/.../j2ee/configtool/, others were simply not there, so it was impossible to start it. Have i forgotten something by EXPORT/IMPORT or I should just use other software for coping a System with douple stack on a CI and DIs? Or should I get configtools for Linux platform ( have searched but not found yet) and try to make the same changes wich i have done by the CI before i started Java on the CI? The most irritated point is that i can't see the dialog instanes in Configtool from the CI.
Any other suggestions and good advices?
Thanks a lot in advance.
Regards, Polina

Hi Manoj, 
I have founded following information in the work directory of one of my dialog instances ( where the java stack doesn't want to start after the copy): /usr/sap/SID/instance/work/ 
1) std_server0.out is in the condition before the system copy, no new data was written there. 
2)dev_disp 
DpJ2eeStart: j2ee state = STARTED 
DpJ2eeLogin: j2ee state = CONNECTED 
Fri Feb 26 12:58:04 2010 
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212] 
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Fri Feb 26 12:58:20 2010 
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN 
Fri Feb 26 12:57:20 2010 
***LOG Q0I=> NiIBindSocket: could not delete file '/tmp/.sapstream64984' for hdl 2: unlink (1: Operation not permitted) [nixxi.cpp 3207] 
ERROR => NiIBindSocket: could not delete file '/tmp/.sapstream64984' (hdl 2; errno=0) [nixxi.cpp 3214] 
WARNING => NiIBind: Could not bind local domain socket, only listening on internet socket [nixxi.cpp 3491]
It seems that java is trying to start but something goes wrong and it have to shut down
3)dev_bootstrap 
[Thr 1086335296] JLaunchIExitJava: exit hook is called (rc = 66) 
[Thr 1086335296] ********************************************************************** 
ERROR => The Java VM terminated with a non-zero exit code. 
Please see SAP Note 943602 , section 'J2EE Engine exit codes' 
for additional information and trouble shooting. 
********************************************************************** 
[Thr 1086335296] SigISetIgnoreAction : SIG_IGN for signal 17 
[Thr 1086335296] JLaunchCloseProgram: good bye (exitcode = 66)
4) jvm_bootstrap.out 
... 
Exception occurred: 
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID264509300" does not exist.
.. 
Exception occurred: 
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties! 
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476) 
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146) 
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID264509300) in the database! Check database consistency or local Bootstrap properties! 
[Bootstrap module]> Problem occurred while performing synchronization.
j2ee/instance_id = ID2645093 <--- that is the ID of those DI where i took these traces from. So it seems that this ID is not in the database at all. Probably the infromation about the java stack of my DIs was not exported at all...
Thanks in advance. 
Regards, 
Polina

How to change the SID during system copy

This blog /people/johannes.heinrich/blog/2006/07/07/new-features-in-db2-udb-v9--part-3 (i.e. the "new feature of V9" in this group) only
talk about the system copy without changing the SID.
In reality, we often want to change the SID during the system copy. Can we modify the script mentioned in above blog
to make SID change possible?
Thanks!

Hi Christy,
if you´re using export/import which is prefered you can change the sid during the parameter setting for export and import. You´ll be asked by the old sid and the new sid. For the tablespace names it is not so important because db2 is using tablespace id not the name for the internal administration.
Regards
Olaf

Could not create source System to r/3 Server

hi,
I have a BW QAS System
I am trying to create a r/3 system(QA2) as source system to this server.
When i go to RSA1 and create the source system, i am getting the following message Source system PD2CLNT100 does not exist
R/3 System QA2 was copied from PD2 yesterday. The logical name for the client 100 is still PD2CLNT100
I understand that this is a problem in R/3 Server that the logical name should reflect something like QA2CLNT100 which was before.
Pls guide

Hello Balaji,
Have you run BDLS after the system copy. If not please do it where in you need to replace PD2CLNT100 by QA2CLNT100 .
Regards.
Ruchit.

DB2 Row compression activated - Any changes during System Copy process?

Hell All,
I have activated DB2 Row Compression.
Now i want to do a System Copy.
Any changes due to this feature in the regular System Copy procedure? Like using R3load fastload COMPRESS options?
Thanks,
Bidwan

Hello Bidwan,
Please see the following blog regarding row compression:
/people/johannes.heinrich/blog/2006/09/05/new-features-in-db2-udb-v9--part-4
R3load has the new option '-loadprocedure fast COMPRESS'. Started with this option it loads part of the data, does a REORG to create the compression dictionary and then loads the rest of the data. This way the table does not grow up to it's full size before it is compressed. For more details see OSS note 886231.
Regards,
Paul

Setting a new UME datasource during system copy

Hi experts,
As a part of an sap solution we are currently working onu2026.the following two systems have been installed: SAP NTW AS ABAP 7.01 and SAP NTW AS JAVA 7.01
In a first moment the ABAP DB was set as the UME data sourceu2026.however according to new requirements, LDAP should be set as data source. Iu2019m aware this is not possible. Apparently the only way to accomplish this is a complete reinstallation.
My question isu2026..Itu2019s possible to perform a system copy instead of re install the system? Does sapinst provide the chance to define a new UME data source during the system copy?
Thanks in advance

Hi,
Unfortunately, the SAPInst in system copy would not give an option to change the UME.
Regards,
Srikishan

Bad file is not created during the external table creation.

Hello Experts,
I have created a script for external table in Oracle 10g DB. Everything is working fine except it does not create the bad file, But it creates the log file. I Cann't figure out what is the issue. Because my shell scripts is failing and the entire program is failing. I am attaching the table creation script and the shell script where it is refering and the error. Kindly let me know if something is missing. Thanks in advance
Table Creation Scripts:_-------------------------------
create table RGIS_TCA_DATA_EXT
guid VARCHAR2(250),
badge VARCHAR2(250),
scheduled_store_id VARCHAR2(250),
parent_event_id VARCHAR2(250),
event_id VARCHAR2(250),
organization_number VARCHAR2(250),
customer_number VARCHAR2(250),
store_number VARCHAR2(250),
inventory_date VARCHAR2(250),
full_name VARCHAR2(250),
punch_type VARCHAR2(250),
punch_start_date_time VARCHAR2(250),
punch_end_date_time VARCHAR2(250),
event_meet_site_id VARCHAR2(250),
vehicle_number VARCHAR2(250),
vehicle_description VARCHAR2(250),
vehicle_type VARCHAR2(250),
is_owner VARCHAR2(250),
driver_passenger VARCHAR2(250),
mileage VARCHAR2(250),
adder_code VARCHAR2(250),
bonus_qualifier_code VARCHAR2(250),
store_accuracy VARCHAR2(250),
store_length VARCHAR2(250),
badge_input_type VARCHAR2(250),
source VARCHAR2(250),
created_by VARCHAR2(250),
created_date_time VARCHAR2(250),
updated_by VARCHAR2(250),
updated_date_time VARCHAR2(250),
approver_badge_id VARCHAR2(250),
approver_name VARCHAR2(250),
orig_guid VARCHAR2(250),
edit_type VARCHAR2(250)
organization external
type ORACLE_LOADER
default directory ETIME_LOAD_DIR
access parameters
RECORDS DELIMITED BY NEWLINE
BADFILE ETIME_LOAD_DIR:'tstlms.bad'
LOGFILE ETIME_LOAD_DIR:'tstlms.log'
READSIZE 1048576
FIELDS TERMINATED BY '|'
MISSING FIELD VALUES ARE NULL(
GUID
,BADGE
,SCHEDULED_STORE_ID
,PARENT_EVENT_ID
,EVENT_ID
,ORGANIZATION_NUMBER
,CUSTOMER_NUMBER
,STORE_NUMBER
,INVENTORY_DATE char date_format date mask "YYYYMMDD HH24:MI:SS"
,FULL_NAME
,PUNCH_TYPE
,PUNCH_START_DATE_TIME char date_format date mask "YYYYMMDD HH24:MI:SS"
,PUNCH_END_DATE_TIME char date_format date mask "YYYYMMDD HH24:MI:SS"
,EVENT_MEET_SITE_ID
,VEHICLE_NUMBER
,VEHICLE_DESCRIPTION
,VEHICLE_TYPE
,IS_OWNER
,DRIVER_PASSENGER
,MILEAGE
,ADDER_CODE
,BONUS_QUALIFIER_CODE
,STORE_ACCURACY
,STORE_LENGTH
,BADGE_INPUT_TYPE
,SOURCE
,CREATED_BY
,CREATED_DATE_TIME char date_format date mask "YYYYMMDD HH24:MI:SS"
,UPDATED_BY
,UPDATED_DATE_TIME char date_format date mask "YYYYMMDD HH24:MI:SS"
,APPROVER_BADGE_ID
,APPROVER_NAME
,ORIG_GUID
,EDIT_TYPE
location (ETIME_LOAD_DIR:'tstlms.dat')
reject limit UNLIMITED;
_***Shell Script*:*----------------_*
version=1.0
umask 000
DATE=`date +%Y%m%d%H%M%S`
TIME=`date +"%H%M%S"`
SOURCE=`hostname`
fcp_login=`echo $1|awk '{print $3}'|sed 's/"//g'|awk -F= '{print $2}'`
fcp_reqid=`echo $1|awk '{print $2}'|sed 's/"//g'|awk -F= '{print $2}'`
TXT1_PATH=/home/ac1/oracle/in/tsdata
TXT2_PATH=/home/ac2/oracle/in/tsdata
ARCH1_PATH=/home/ac1/oracle/in/tsdata
ARCH2_PATH=/home/ac2/oracle/in/tsdata
DEST_PATH=/home/custom/sched/in
PROGLOG=/home/custom/sched/logs/rgis_tca_to_tlms_create.sh.log
PROGNAME=`basename $0`
PROGPATH=/home/custom/sched/scripts
cd $TXT2_PATH
FILELIST2="`ls -lrt tstlmsedits*.dat |awk '{print $9}'`"
NO_OF_FILES2="`ls -lrt tstlmsedits*.dat |awk '{print $9}'|wc -l`"
$DEST_PATH/tstlmsedits.dat for i in $FILELIST2
do
cat $i >> $DEST_PATH/tstlmsedits.dat
printf "\n" >> $DEST_PATH/tstlmsedits.dat
mv $i $i.$DATE
#mv $i $TXT2_PATH/test/.
mv $i.$DATE $TXT2_PATH/test/.
done
if test $NO_OF_FILES2 -eq 0
then
echo " no tstlmsedits.dat file exists " >> $PROGLOG
else
echo "created dat file tstlmsedits.dat at $DATE" >> $PROGLOG
echo "-------------------------------------------" >> $PROGLOG
fi
NO_OF_FILES1="`ls -lrt tstlms*.dat |awk '{print $9}'|wc -l`"
FILELIST1="`ls -lrt tstlms*.dat |awk '{print $9}'`"
$DEST_PATH/tstlms.datfor i in $FILELIST1
do
cat $i >> $DEST_PATH/tstlms.dat
printf "\n" >> $DEST_PATH/tstlms.dat
mv $i $i.$DATE
# mv $i $TXT2_PATH/test/.
mv $i.$DATE $TXT2_PATH/test/.
done
if test $NO_OF_FILES1 -eq 0
then
echo " no tstlms.dat file exists " >> $PROGLOG
else
echo "created dat file tstlms.dat at $DATE" >> $PROGLOG
fi
cd $TXT1_PATH
FILELIST3="`ls -lrt tstlmsedits*.dat |awk '{print $9}'`"
NO_OF_FILES3="`ls -lrt tstlmsedits*.dat |awk '{print $9}'|wc -l`"
$DEST_PATH/tstlmsedits.datfor i in $FILELIST3
do
cat $i >> $DEST_PATH/tstlmsedits.dat
printf "\n" >> $DEST_PATH/tstlmsedits.dat
mv $i $i.$DATE
#mv $i $TXT1_PATH/test/.
mv $i.$DATE $TXT1_PATH/test/.
done
if test $NO_OF_FILES3 -eq 0
then
echo " no tstlmsedits.dat file exists " >> $PROGLOG
else
echo "created dat file tstlmsedits.dat at $DATE" >> $PROGLOG
echo "-------------------------------------------" >> $PROGLOG
fi
NO_OF_FILES4="`ls -lrt tstlms*.dat |awk '{print $9}'|wc -l`"
FILELIST4="`ls -lrt tstlms*.dat |awk '{print $9}'`"
$DEST_PATH/tstlms.datfor i in $FILELIST4
do
cat $i >> $DEST_PATH/tstlms.dat
printf "\n" >> $DEST_PATH/tstlms.dat
mv $i $i.$DATE
# mv $i $TXT1_PATH/test/.
mv $i.$DATE $TXT1_PATH/test/.
done
if test $NO_OF_FILES4 -eq 0
then
echo " no tstlms.dat file exists " >> $PROGLOG
else
echo "created dat file tstlms.dat at $DATE" >> $PROGLOG
fi
#connecting to oracle to generate bad files
sqlplus -s $fcp_login<<EOF
select count(*) from rgis_tca_data_ext;
select count(*) from rgis_tca_data_history_ext;
exit;
EOF
#counting the records in files
tot_rec_in_tstlms=`wc -l $DEST_PATH/tstlms.dat | awk ' { print $1 } '`
tot_rec_in_tstlmsedits=`wc -l $DEST_PATH/tstlmsedits.dat | awk ' { print $1 } '`
tot_rec_in_tstlms_bad=`wc -l $DEST_PATH/tstlms.bad | awk ' { print $1 } '`
tot_rec_in_tstlmsedits_bad=`wc -l $DEST_PATH/tstlmsedits.bad | awk ' { print $1 } '`
#updating log table
echo "pl/sql block started"
sqlplus -s $fcp_login<<EOF
define tot_rec_in_tstlms = '$tot_rec_in_tstlms';
define tot_rec_in_tstlmsedits = '$tot_rec_in_tstlmsedits';
define tot_rec_in_tstlms_bad = '$tot_rec_in_tstlms_bad';
define tot_rec_in_tstlmsedits_bad='$tot_rec_in_tstlmsedits_bad';
define fcp_reqid ='$fcp_reqid';
declare
l_tstlms_file_id number := null;
l_tstlmsedits_file_id number := null;
l_tot_rec_in_tstlms number := 0;
l_tot_rec_in_tstlmsedits number := 0;
l_tot_rec_in_tstlms_bad number := 0;
l_tot_rec_in_tstlmsedits_bad number := 0;
l_request_id fnd_concurrent_requests.request_id%type;
l_start_date fnd_concurrent_requests.actual_start_date%type;
l_end_date fnd_concurrent_requests.actual_completion_date%type;
l_conc_prog_name fnd_concurrent_programs.concurrent_program_name%type;
l_requested_by fnd_concurrent_requests.requested_by%type;
l_requested_date fnd_concurrent_requests.request_date%type;
begin
--getting concurrent request details
begin
SELECT fcp.concurrent_program_name,
fcr.request_id,
fcr.actual_start_date,
fcr.actual_completion_date,
fcr.requested_by,
fcr.request_date
INTO l_conc_prog_name,
l_request_id,
l_start_date,
l_end_date,
l_requested_by,
l_requested_date
FROM fnd_concurrent_requests fcr, fnd_concurrent_programs fcp
WHERE fcp.concurrent_program_id = fcr.concurrent_program_id
AND fcr.request_id = &fcp_reqid; --fnd_global.conc_request_id();
exception
when no_data_found then
fnd_file.put_line(fnd_file.log, 'Error:RGIS_TCA_TO_TLMS_CREATE.sh');
fnd_file.put_line(fnd_file.log, 'No data found for request_id');
fnd_file.put_line(fnd_file.log, sqlerrm);
raise_application_error(-20001,
'Error occured when executing RGIS_TCA_TO_TLMS_CREATE.sh ' ||
sqlerrm);
when others then
fnd_file.put_line(fnd_file.log, 'Error:RGIS_TCA_TO_TLMS_CREATE.sh');
fnd_file.put_line(fnd_file.log,
'Error occured when retrieving request_id request_id');
fnd_file.put_line(fnd_file.log, sqlerrm);
raise_application_error(-20001,
'Error occured when executing RGIS_TCA_TO_TLMS_CREATE.sh ' ||
sqlerrm);
end;
--calling ins_or_upd_tca_process_log to update log table for tstlms.dat file
begin
rgis_tca_to_tlms_process.ins_or_upd_tca_process_log
 (l_tstlms_file_id,
 'tstlms.dat',
 l_conc_prog_name,
 l_request_id,
 l_start_date,
 l_end_date,
 &tot_rec_in_tstlms,
 &tot_rec_in_tstlms_bad,
 null,
 null,
 null,
 null,
 null,
 null,
 null,
 l_requested_by,
 l_requested_date,
 null,
 null,
 null,
 null,
 null);
exception
when others then
fnd_file.put_line(fnd_file.log, 'Error:RGIS_TCA_TO_TLMS_CREATE.sh');
fnd_file.put_line(fnd_file.log,
'Error occured when executing rgis_tca_to_tlms_process.ins_or_upd_tca_process_log for tstlms file');
fnd_file.put_line(fnd_file.log, sqlerrm);
end;
--calling ins_or_upd_tca_process_log to update log table for tstlmsedits.dat file
begin
rgis_tca_to_tlms_process.ins_or_upd_tca_process_log
 (l_tstlmsedits_file_id,
 'tstlmsedits.dat',
 l_conc_prog_name,
 l_request_id,
 l_start_date,
 l_end_date,
 &tot_rec_in_tstlmsedits,
 &tot_rec_in_tstlmsedits_bad,
 null,
 null,
 null,
 null,
 null,
 null,
 null,
 l_requested_by,
 l_requested_date,
 null,
 null,
 null,
 null,
 null);
exception
when others then
fnd_file.put_line(fnd_file.log, 'Error:RGIS_TCA_TO_TLMS_CREATE.sh');
fnd_file.put_line(fnd_file.log,
'Error occured when executing rgis_tca_to_tlms_process.ins_or_upd_tca_process_log for tstlmsedits file');
fnd_file.put_line(fnd_file.log, sqlerrm);
end;
end;
exit;
EOF
echo "rgis_tca_to_tlms_process.sql started"
sqlplus -s $fcp_login @$SCHED_TOP/sql/rgis_tca_to_tlms_process.sql $fcp_reqid
exit;
echo "rgis_tca_to_tlms_process.sql ended"
_**Error:*----------------------------------*_
RGIS Scheduling: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
TCATLMS module: TCA To TLMS Import Process
Current system time is 18-AUG-2011 06:13:27
COUNT(*)
 16
COUNT(*)
 25
wc: cannot open /home/custom/sched/in/tstlms.bad
wc: cannot open /home/custom/sched/in/tstlmsedits.bad
pl/sql block started
old 33: AND fcr.request_id = &fcp_reqid; --fnd_global.conc_request_id();
new 33: AND fcr.request_id = 18661823; --fnd_global.conc_request_id();
old 63: &tot_rec_in_tstlms,
new 63: 16,
old 64: &tot_rec_in_tstlms_bad,
new 64: ,
old 97: &tot_rec_in_tstlmsedits,
new 97: 25,
old 98: &tot_rec_in_tstlmsedits_bad,
new 98: ,
ERROR at line 64:
ORA-06550: line 64, column 4:
PLS-00103: Encountered the symbol "," when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternatively-q
ORA-06550: line 98, column 4:
PLS-00103: Encountered the symbol "," when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql st
rgis_tca_to_tlms_process.sql started
old 12: and concurrent_request_id = '&1';
new 12: and concurrent_request_id = '18661823';
old 18: and concurrent_request_id = '&1';
new 18: and concurrent_request_id = '18661823';
old 22: rgis_tca_to_tlms_process.run_tca_data(l_tstlms_file_id,&1);
new 22: rgis_tca_to_tlms_process.run_tca_data(l_tstlms_file_id,18661823);
old 33: rgis_tca_to_tlms_process.run_tca_data_history(l_tstlmsedits_file_id,&1);
new 33: rgis_tca_to_tlms_process.run_tca_data_history(l_tstlmsedits_file_id,18661823);
old 44: rgis_tca_to_tlms_process.send_tca_email('TCATLMS',&1);
new 44: rgis_tca_to_tlms_process.send_tca_email('TCATLMS',18661823);
declare
ERROR at line 1:
ORA-20001: Error occured when executing RGIS_TCA_TO_TLMS_PROCESS.sql ORA-01403:
no data found
ORA-06512: at line 59
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 18661823
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 18-AUG-2011 06:13:29
---------------------------------------------------------------------------

Hi,
Check the status of the batch in SM35 transaction.
if the batch is locked by mistake or any other error, now you can release it and aslo you can process again.
To Release -Shift+F4.
Also you can analyse the job status through F2 button.
Bye

J2EE Cluster is not created during system copy.

Similar Messages

Maybe you are looking for