SSO to R3 not working after system copy

Hi Experts,
Recently our QA R3 client XXX was deleted and the whole system was rebuild using system copy of client ZZZ of R3 production. Now we had to reconfigure the SSO between portal and QA R3 with the new client.
But it is not working. It was found that the QA R3's own self signed certificate shows CN=ERP (same as R3 Prod) and not ERU as it should have been. We changed the CN value to ERP,in Visual Admin (Services ->key storage , Ticket ). Still the result is same.
How to re-generate the self signed certificate in R3 with CN=ERU ?
or a workaround for this problem.
Regards
Jimmy

HI Jayendra
Recreate the saplogonticketkeypair following the procedure outlined here
http://help.sap.com/saphelp_nw70/helpdata/en/75/c80b424c6cc717e10000000a155106/content.htm
Then you can export the SAPLogonticketkeypair-cert (public key certificate) of the Java AS and import it into the target ABAP system
Important: the following two steps must be done in the ABAP client that will receive the logon tickets i.e the ABAP client that the component/application on the Java AS is configured to connect to e.g the client specified in the portal iview properties or the client specified in a Web Dynpro JCo Destination
(1) Import the public-key certificate of the Java AS into the ABAP systems certificate list using transaction STRUSTSSO2
(2) Add the certificate to access control list
When adding the certificate to the ACL the SID should be set to the SID of the ticket issuing Java AS and the client should be set to the client that the Java AS is writing to the logon tickets i.e the value of login.ticket_client in the Java AS
Remember, in an Add-In installation, where the system IDs are the same, you must change the default client for the J2EE Engine (000) to a client that does not exist on the SAP Web AS ABAP system e.g change login.ticket_client to 999
See: http://help.sap.com/saphelp_nw70/helpdata/en/cb/ac3d41a5a9ef23e10000000a155106/content.htm
The reason for this change is that the system ID and client combination must be unique when tickets are to be accepted by an SAP Web AS ABAP system
By the way it is better to start a new thread with your question rather than bumping a thread that was already set to 'answered'

Similar Messages

Dialog Instances Java are not up after System Copy NW2004s SR2 ABAP+JAVA

Hello guys,
I have just performed a system copy of our BW system (douple stack NW2004s) wich consists from CI and 2 DIs. First I made an export using SAPINST (Software from SAP_BUSINESS_SUITE_2005_SR2 for sparc solaris), where I choosed in SAP Installation Master->SAp Netweaver 2004s Support Release 2->Additional Software Life-cycle Tasks->System Copy->Oracle->Source System->Central System->Based on ABAP and Java->Database and Central Instance Export. I couldn't find any special task for export java from my dialog instances, so I thought it would be ok like that. Then I used the same software on my target system, choosed ...Additional Software Life-cycle Tasks->System Copy->Oracle->Target System->Central System->Based on ABAP and Java->Central System Installation. In the Dialog input phase of SAPINST I indicated that use db specific tools to copy your database. So I made the database restore+recovery with our DB tools and continued withthe SAPINST and Import.
Afterwards the ABAP part and Java on the central Instance run perfect, but Java Stack is not up by both of Dialog Instances. I have checked the configtool on the server where the CI is running (the DIs are running on different linux servers) and couldn't see any entries for my dialog instances, only the CI was seable there. I tried to start configtool from the application server, but there I could find only the file config.properties in the directory /usr/sap/<SID>/.../j2ee/configtool/, others were simply not there, so it was impossible to start it. Have i forgotten something by EXPORT/IMPORT or I should just use other software for coping a System with douple stack on a CI and DIs? Or should I get configtools for Linux platform ( have searched but not found yet) and try to make the same changes wich i have done by the CI before i started Java on the CI? The most irritated point is that i can't see the dialog instanes in Configtool from the CI.
Any other suggestions and good advices?
Thanks a lot in advance.
Regards, Polina

Hi Manoj, 
I have founded following information in the work directory of one of my dialog instances ( where the java stack doesn't want to start after the copy): /usr/sap/SID/instance/work/ 
1) std_server0.out is in the condition before the system copy, no new data was written there. 
2)dev_disp 
DpJ2eeStart: j2ee state = STARTED 
DpJ2eeLogin: j2ee state = CONNECTED 
Fri Feb 26 12:58:04 2010 
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212] 
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Fri Feb 26 12:58:20 2010 
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN 
Fri Feb 26 12:57:20 2010 
***LOG Q0I=> NiIBindSocket: could not delete file '/tmp/.sapstream64984' for hdl 2: unlink (1: Operation not permitted) [nixxi.cpp 3207] 
ERROR => NiIBindSocket: could not delete file '/tmp/.sapstream64984' (hdl 2; errno=0) [nixxi.cpp 3214] 
WARNING => NiIBind: Could not bind local domain socket, only listening on internet socket [nixxi.cpp 3491]
It seems that java is trying to start but something goes wrong and it have to shut down
3)dev_bootstrap 
[Thr 1086335296] JLaunchIExitJava: exit hook is called (rc = 66) 
[Thr 1086335296] ********************************************************************** 
ERROR => The Java VM terminated with a non-zero exit code. 
Please see SAP Note 943602 , section 'J2EE Engine exit codes' 
for additional information and trouble shooting. 
********************************************************************** 
[Thr 1086335296] SigISetIgnoreAction : SIG_IGN for signal 17 
[Thr 1086335296] JLaunchCloseProgram: good bye (exitcode = 66)
4) jvm_bootstrap.out 
... 
Exception occurred: 
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID264509300" does not exist.
.. 
Exception occurred: 
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties! 
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476) 
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146) 
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID264509300) in the database! Check database consistency or local Bootstrap properties! 
[Bootstrap module]> Problem occurred while performing synchronization.
j2ee/instance_id = ID2645093 <--- that is the ID of those DI where i took these traces from. So it seems that this ID is not in the database at all. Probably the infromation about the java stack of my DIs was not exported at all...
Thanks in advance. 
Regards, 
Polina

BannerMaker not working after system update.

Hello all,
I am not trusting Apple now for system updates anymore, because the last couple of updates, after updating my system software, I have problems. I never have these issues with Windows.
Getting to my point, I use BannerMaker (an app created by some Fed agency that I had found googling because Apple doesn't support it as standard, and Windows already had this for years to comply with DOD requirements) to use for a login warning legal note, etc. This goes on to the login window only when you disable the icon/name login. I was in the process of updating it and it told me that the loginwindow.plist wasn't found. I found it on the Spotlight, but I had no way of changing it.
I should also note that after the system update, the login process reverted back to the icon/name login, which never happened. I always require me and another user to type their username because to protect the user's privacy.
How can I get BannerMaker to work again, or how can I get into that file so I can change it and I also want to know if other users had their loginwindow settings mysteriously affected by the update?
I am really disappointed by the lousy updates that paralyzes my security and other issues with previous updates, which I won't get into. I am disappointed with Apple right now.
Steven

I had a feeling that was going to happen. Well I just don't have the patience to do that. Apple needs to go onto the Windows system that you could delete specific updates rather than reinstalling the system software. And I also don't like how updates affect work around apps, how they close them down because they are not authorized software. I need a secure system, and Apple won't let me. **** to screw with them, I might just give my mother my MacBook and I go get a Windows notebook. I had nothing but problems since I got this MacBook.

RFC connections do not work after system restart

Hi PI experts!
We're facing a problem with our PI 7.0 system. After each restart of the system, all RFC sender communication channels do not work. When testing the connection in the sending SAP system, the connection test fails. Currently we workaround the issue by manually restarting the RFC adapter after system restart.
Does anybody has any idea how th fix that problem? <<text removed>>
Cheers,
Matthias
Edited by: Matt on Apr 29, 2009 3:26 PM - don't offer points

Mathias,
Your problem is due to the fact that SAP is not up and running when XI restarts.
there is a parameter in RFC adapter that you can modify in order to fix that
Please, see the following link and let me know: /people/community.user/blog/2006/09/21/xi-rfcadapter-reconnect-issue
best regards,
David

Silverlight and google chrome not working after system update

I just did a system update and now google chrome and the silverlight plugin do not work. I've tried uninstalling and reinstalling both numerous times, restarted, and checked for updates again but nothing works. What's going on?

Check compatibility with their respective vendors.

[SOLVED] Audio not working after system update

Hi all,
About 4 days ago, I installed Arch Linux (full systemd) with LXDE on a Dell Inspiron Mini netbook. Everything seemed to be OK until today, when I did pacman -Syu and then installed the SLiM login manager. After rebooting there was no audio. I am not sure if this happened because of the upgrade or because of SLiM. I am pretty new to systemd, so I could be missing something very obvious. I have tried many things so far, with no success:
1) I disabled SLiM and instead started X from the terminal at boot, and nothing happened.
2) I have removed my username from the 'audio' group, added it again, removed it, etc... No change.
3) I downgraded systemd, systemd-sysvcompat, and xine-lib (just in case) to their previous version and nothing happened.
4) I seem to be detecting the sound card correctly. If I run "aplay -l" as my normal, non-root user I get the same output as the root user:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
5) If I login with SLiM, my session seems to be setup correctly, as far as I can tell:
$ loginctl show-session $XDG_SESSION_ID
Id=1
Timestamp=Mon, 2012-10-29 00:38:35 EDT
TimestampMonotonic=14973592
DefaultControlGroup=name=systemd:/user/vrg/1
VTNr=7
Display=:0.0
Remote=no
RemoteUser=root
Service=slim
Leader=274
Audit=1
Type=x11
Class=user
Active=yes
State=active
KillProcesses=no
IdleHint=no
IdleSinceHint=0
IdleSinceHintMonotonic=0
Name=vrg
6) I reinstalled pulseaudio, pulseaudio-alsa, alsa-plugins, and alsa-oss... Nothing.
7) I do not have the ~/.asoundrc file.
Here is a full list of the packages I upgraded:
[2012-10-28 11:19] Running 'pacman -Syy'
[2012-10-28 11:19] synchronizing package lists
[2012-10-28 11:19] Running 'pacman -Syu'
[2012-10-28 11:19] synchronizing package lists
[2012-10-28 11:19] starting full system upgrade
[2012-10-28 11:20] upgraded linux-api-headers (3.5.5-1 -> 3.6.3-1)
[2012-10-28 11:20] Generating locales...
[2012-10-28 11:20] en_US.UTF-8... done
[2012-10-28 11:20] Generation complete.
[2012-10-28 11:21] upgraded glibc (2.16.0-4 -> 2.16.0-5)
[2012-10-28 11:21] upgraded binutils (2.22-10 -> 2.23-1)
[2012-10-28 11:21] upgraded bison (2.6.2-1 -> 2.6.4-1)
[2012-10-28 11:21] upgraded coreutils (8.19-1 -> 8.20-1)
[2012-10-28 11:21] upgraded systemd (194-4 -> 195-2)
[2012-10-28 11:21] upgraded device-mapper (2.02.97-1 -> 2.02.98-1)
[2012-10-28 11:21] upgraded cryptsetup (1.5.0-2 -> 1.5.1-1)
[2012-10-28 11:21] installed nss-myhostname (0.3-3)
[2012-10-28 11:21] warning: /etc/shadow installed as /etc/shadow.pacnew
[2012-10-28 11:21] upgraded filesystem (2012.10-1 -> 2012.10-2)
[2012-10-28 11:21] upgraded firefox (16.0.1-1 -> 16.0.2-1)
[2012-10-28 11:21] upgraded gcc-libs (4.7.2-1 -> 4.7.2-2)
[2012-10-28 11:21] upgraded gcc (4.7.2-1 -> 4.7.2-2)
[2012-10-28 11:21] upgraded lirc-utils (1:0.9.0-32 -> 1:0.9.0-33)
[2012-10-28 11:21] upgraded lvm2 (2.02.97-1 -> 2.02.98-1)
[2012-10-28 11:21] upgraded mkinitcpio (0.10-1 -> 0.11.0-1)
[2012-10-28 11:21] upgraded syslinux (4.05-7 -> 4.06-1)
[2012-10-28 11:21] upgraded systemd-sysvcompat (194-4 -> 195-2)
[2012-10-28 11:21] upgraded xine-lib (1.2.2-2 -> 1.2.2-3)
More information:
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Oct 29 00:38 by-path
crw-rw----+ 1 root root 116, 5 Oct 29 00:38 controlC0
crw-rw----+ 1 root root 116, 4 Oct 29 00:38 hwC0D0
crw-rw----+ 1 root root 116, 3 Oct 29 00:38 pcmC0D0c
crw-rw----+ 1 root root 116, 2 Oct 29 01:53 pcmC0D0p
crw------- 1 root root 116, 1 Oct 29 00:38 seq
crw-rw----+ 1 root root 116, 33 Oct 29 00:38 timer
$ lsmod | grep '^snd' | column -t
snd_hda_codec_realtek 52245 1
snd_hda_intel 22256 1
snd_hda_codec 83677 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 61470 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 5869 2 snd_pcm,snd_hda_intel
snd_timer 14902 1 snd_pcm
snd 44874 8 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
If I run 'fuser -v /dev/snd/*' I get nothing (blank) and if I run 'fuser -v /dev/dsp' I get file not found. I've also done 'amixer sset Master unmute' and 'speaker-test'. Everything seems OK, except that I can't hear anything!
Any help or suggestions that could point me in the right direction would be greatly appreciated.
Last edited by vrg (2012-10-29 07:25:36)

Thanks Rasi. Incidentally, I just solved the issue a few minutes ago and was about to post the answer, but yes, you are right... the device was muted. It's embarrassing, but it did not seem obvious to me that the device was muted... All the sliders seemed OK, with nice, green values between 50 and 100. Also, the LXDE volume control was unmuted with a value between 50% and 100%, and I ran the 'amixer sset Master unmute' command several times. Clearly, this command does not do the job.
What I was missing is nicely described in the PulseAudio troubleshooting:
If one experiences no audio output via any means while using ALSA, attempt to unmute the sound card. To do this, launch alsamixer and make sure each column has a green 00 under it (this can be toggled by pressing 'm')
I was not pressing 'm'... I know it's on the wiki, but this did not seem to be a PulseAudio issue, which was working perfectly yesterday and was not upgraded, so the PulseAudio troubleshooting was not the first place I looked for solutions. I wonder why the device got muted in the first place.
Thanks again for the help!

Excite PRO 3G connection not work after system update

Hello, I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35. After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service". My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me I'm waiting for your help.
Thank you
Regards

This is the forums for Toshiba USA. Unfortunately, we don't have informaiton about your model. You may want to contact Toshiba in your region. You could check the Toshiba Europe forums.
- Peter

Broadcom driver not working after system update on 10/10/2014

Yesterday I updated my system (pacman -Syyu) and after rebooting my wireless card is no longer detected by the operating system. I have a 15 inch macbook pro (late 2013) with a broadcom BCM4360 wireless card. It was tough to get working in the first place, but eventually I got it to work with the broadcom-wl-dkms driver. The package is still installed, so I have no idea what to do because I have tried all of the available broadcom driver packages that I know to exist.

Did you rebuild the wireless driver after updating the system? I've never quite figured out how to deal with the dkms variation of the drivers so you are on your own for the correct syntax (surely in the wiki somewhere), but I know that for my BCM4314 with the broadcom-wl driver, every time there is an update to the kernel, I need to rebuild the broadcom-wl driver (even if broadcom-wl itself didn't change) so that the wl.ko module shows up in the appropriate place in the kernel modules directory.

Touch screen not working after system update

A few months ago, my laptop (Satelitte P55t-A5202) went through an automatic system update. Ever since then, my touch screen won't work. I followed the directions to reinstall the HDI programs several times. The first time it worked but only for a few hours. The next time I tried to reinstall, it worked for a second. Now reinstalls do nothing.
Before the system update, my touchscreen worked fine. And in reading the forums, this seems to be a common problem with the updates. I called TOSHIBA customer service for help. The FIRST thing they want to do is charge me for tech support because my laptop is out of warranty. I told the customer service rep repeatedly that my touch screen worked fine until the update. He refused to give me any help because I did not want to pay for him to tell me how to resolve...
In my opinion, this is a toshiba issue not mine so regardless if my laptop is out of warranty, Toshiba should take ownership and be accountable for the problems they cause.
Does anyone have any suggestions as to how to take care of this?
By the way, Toshiba customer service representative was rude, you could barely understand him because of his accent, I had to repeat SEVERAL times what my issue was because he couldn't get past the warranty issue and I had to ask several times to speak with a supervisor ( to which he told me a supervisor would call me instead)

See my reply in the laptop forum.
-Jerry

Itunes not working after system restore

hey i searched this and found nothing helpful.
i did a system restore before and now my itunes won't open. it shows a message that tells me it can't open. i've reinstalled and uninstalled and everything i can think of...
how can i fix this and make itunes work again?

If you have an HP, you need to goto Hp.com and download a patch for your model of PC, alot of there PCs have issues with iTUnes after using there software to do a restore. If you have another brand, check there site.
You can also try uninstalling iTunes AND quicktime, disabling antivirus and downloading/installing the latest iTunes from apple.com

Speakers not working after system restore

After a fatal disk crash I've restored my system with a new internal hard drive. However, now the audio out isn't working. I've repaired permissions, and the only option shown in the sound system preferences is 'Built-in audio'.
Any ideas?

Try zapping the PRAM:
http://docs.info.apple.com/article.html?artnum=2238

Qiv not work after system update

error message:
zhiwen ~/ qiv /doc/img/1.jpg
Gdk-ERROR **: BadMatch (invalid parameter attributes)
serial 115 error_code 8 request_code 2 minor_code 0
Locking assertion failure. Backtrace:
#0 /usr/lib/libxcb-xlib.so.0 [0xb7b02767]
#1 /usr/lib/libxcb-xlib.so.0(xcb_xlib_lock+0x2e) [0xb7b0281e]
#2 /usr/lib/libX11.so.6 [0xb7c9de08]
#3 /usr/lib/libX11.so.6(XSync+0x25) [0xb7c92ce5]
#4 /usr/lib/libgdk-1.2.so.0(gdk_flush+0x28) [0xb7da0fb8]
#5 /usr/lib/libgdk-1.2.so.0(gdk_image_destroy+0x65) [0xb7da84c5]
#6 /usr/lib/libgdk-1.2.so.0(gdk_image_exit+0x2a) [0xb7da85da]
#7 /usr/lib/libgdk-1.2.so.0 [0xb7d942a5]
#8 /lib/libc.so.6(exit+0xd5) [0xb7b344cd]
#9 /usr/lib/libgdk-1.2.so.0 [0xb7d94386]
#10 /usr/lib/libX11.so.6(_XError+0xd3) [0xb7c97053]
#11 /usr/lib/libX11.so.6 [0xb7c9e72c]
#12 /usr/lib/libX11.so.6(_XReply+0x15a) [0xb7c9eaea]
#13 /usr/lib/libX11.so.6(XSync+0x6a) [0xb7c92d2a]
#14 /usr/lib/libgdk-1.2.so.0(gdk_flush+0x28) [0xb7da0fb8]
#15 qiv(update_image+0x384) [0x804c744]
qiv: xcb_xlib.c:73: xcb_xlib_lock: Assertion `!c->xlib.lock' failed.
Aborted
please help.

Hello,
I have the same error since about two weeks. Today I tried to solve that problem and i found this link:
https://bugs.launchpad.net/ubuntu/+sour … +bug/41056
So to fix the problem you have to do:
export XLIB_SKIP_ARGB_VISUALS=1
It seems to be a problem with imlib1 and the X composite extension..... I don't really know what that means .
For those people all were fine with the versions:
ii gdk-imlib11 1.9.14-32ubuntu1 imaging library for use with gtk
ii qiv 2.0-7 A quick image viewer for X
and personally I have
local/imlib 1.9.15-3
General image handling library for X11 and Gtk
local/imlib2 1.4.0-1
Imlib2 is the successor to Imlib. It is NOT a newer version -- Imlib 2 can
be installed alongside Imlib 1.x
local/qiv 2.0-1
Quick Image Viewer (qiv) is a very small and fast GDK/Imlib image viewer
Perhaps the qiv version is too old. Could anyone help ?

Data protector online backup not running after system copy

Dear guru's,
My online backup is not running.The integration of oracle user sapsr3 with data protector 6.0 failed.the error message that came out is;
Oracle Output: ORA-01031: insufficient privileges
SP2-0640: Not connected
sqlcode 1031
Please advise.
Thanks

can you have a look Note 834917 - Oracle Database 10g: New database role SAPCONN
Note 400241 - Problems with ops$ or sapr3 connect to Oracle
cheers,
-Sunil

J2ee engine does not start up after system copy

Dear All,
I have done a system copy of BW3.5 (NW04). I installed the BW.3.5 and then replaced the data and control files.
This has ABAP + java.
Now after system copy when i am starting the server, the J2ee instance doesnt start up.
ABAP is running and DB is up too.
I am getting the following error in log_bootstrap file:-
Exception occured:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID1125100) in the database! Check
database consistency or local Bootstrap properties!
 at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:81)
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
[Aug 26, 2008 2:00:26 PM ] [Bootstrap module]> Problem occured while performing synchronization.
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:42 PM ] Bootstrap MODE:
[Aug 26, 2008 2:00:42 PM ] <INSTANCE GLOBALS>
[Aug 26, 2008 2:00:42 PM ] determined by parameter [ID0011251].
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:46 PM ] Exception occured:
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/di
spatcher/ID1125100" does not exist.
 at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(Configura
tionDataCacheAllImpl.java:107)
 at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfi
guration.java:715)
 at com.sap.engine.bootstrap.Synchronizer.getConfiguration(Synchronizer.java:365)
 at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:78)
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
What could the problem?. Do I need to do some other settings for system copy of JVA instance?
Kindly help
Thanks
Tajinder

Hi,
I already checked that note. It did not help.
I am pasting mine dev_jcontrol file:--
trc file: "/usr/sap/BD1/DVEBMGS00/work/dev_jcontrol", trc level: 1, release: "640"
node name : jcontrol
pid : 868524
system name : BD1
system nr. : 00
started at : Tue Aug 26 16:27:10 2008
arguments :
 arg[00] : jcontrol
 arg[01] : pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
 arg[02] : -DSAPSTART=1
 arg[03] : -DCONNECT_PORT=64380
 arg[04] : -DLISTEN_PORT=64381
 arg[05] : -DSAPSYSTEM=00
 arg[06] : -DSAPSYSTEMNAME=BD1
 arg[07] : -DSAPMYNAME=BWQAS_BD1_00
 arg[08] : -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
 arg[09] : -DFRFC_FALLBACK=ON
 arg[10] : -DFRFC_FALLBACK_HOST=localhost
JStartupReadInstanceProperties: read instance properties [/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.proper
ties:/usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties]
-> ms host : BWQAS
-> ms port : 3601
-> OS libs : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host : BWQAS
-> ms port : 3601
-> os libs : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] bootstrap_ID1125100 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] bootstrap_ID1125150 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID1125100 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] ID1125150 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] sdm : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
[Thr 01] Tue Aug 26 16:27:10 2008
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 258] JControlDPMessageFunc: Thread 258 started as handler thread for R/3 dispatcher messages.
[Thr 01] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) -
using -Xmx512m [jstartxx_mt. 2282]
[Thr 01] [Node: bootstrap] java home is set by profile parameter
 Java Home: /usr/java14_64
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> java path : /usr/java14_64
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20060421 (SR5) (JIT enabl
ed: jitc)
-> java vm vendor : Classic VM (IBM Corporation)
-> java vm type : <default>
-> java vm cpu : ppc64
-> heap size : 512M
-> root path : /usr/sap/BD1/DVEBMGS00/j2ee/cluster
-> class path : ./bootstrap/launcher.jar
-> OS libs path : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jstartup.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0011251
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout: 120000
JStartupStartJLaunch: program = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[00] = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[01] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[02] = -DSAPINFO=BD1_00_bootstrap
-> arg[03] = -file=/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=12582961
-> arg[07] = -jvmOutFile=/usr/sap/BD1/DVEBMGS00/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=64382
-> arg[14] = -DLISTEN_PORT=64381
-> arg[15] = -DSAPSYSTEM=00
-> arg[16] = -DSAPSYSTEMNAME=BD1
-> arg[17] = -DSAPMYNAME=BWQAS_BD1_00
-> arg[18] = -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[19] = -DFRFC_FALLBACK=ON
-> arg[20] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/B
D1/DVEBMGS00/j2ee/os_libs:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/runU:/usr/lib:/usr/sap/BD1/DVEBMGS00/
j2ee/os_libs:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/
runU
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/oracle/BD1/920_64/bin:/usr/java14_
64/bin:/home/bd1adm:/usr/sap/BD1/SYS/exe/runU:/usr/sap/BD1/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home
/bd1adm/bin:/usr/bin/X11:/sbin:.
[Thr 01] JStartupICreateProcess: fork process (pid 893002)
[Thr 01] Tue Aug 26 16:27:18 2008
[Thr 01] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx_mt. 1433]
[Thr 01] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 01] JControlCloseProgram: started (exitcode = 66)
[Thr 01] JControlCloseProgram: good bye... (exitcode=66)
DO i have to change the some settingdsin any file for java instance after system copy.
Thanks
Tajinder

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

SSO to R3 not working after system copy

Similar Messages

Maybe you are looking for