J2se sdk 1.4.2_04  fail to install on Linux...

Hi.
1. ./j2sdk-1_4_2_04-linux-i586.bin
2. Saying yes to EULA
But then :
Do you agree to the above license terms? [yes or no]
yes
tail: `-1' option is obsolete; use `-n 1' since this will be removed in the future
Unpacking...
tail: cannot open `+466' for reading: No such file or directory
Checksumming...
1
The download file appears to be corrupted. Please refer
to the Troubleshooting section of the Installation
Instructions on the download page for more information.
Please do not attempt to install this archive file.
I'm on a Gentoo Linux installation, so I could have the very latest versions of tail and other utilities...
Could someone tell me if they were able to use the Linux Platform self-extracting file (j2sdk-1_4_2_04-linux-i586.bin, 34.17 MB) ?
Just in case, (but I downloaded the bin file 3 times to be sure) here is the md5sum of the file :
cc27ac6189062214c072cb5b4ae068fa j2sdk-1_4_2_04-linux-i586.bin

hi
i'm also running gentoo and was getting the same problem.
the solution is to copy the j2sdk-1_4_2_04-linux-i586.bin file to /usr/portage/distfiles and then run emerge sun-jdk. it should then install fine.
paul

Similar Messages

  • Weblogic Server 6.1 trial version fails to install in Linux

    Weblogic Server 6.1 trial version fails to install in Linux
    (in Linux Redhat 6.2, jdk 1.2.2)
    1. When unzipping the *.zip file "weblogic610_generic.zip", the unzip program
    reported that some files and directories not properly named. (using winzip, quite
    a number of files' directories start "d:/".
    2. During installation, the screen hanged right after choosing language, and the
    background threw "Exception in thread 'main'".

    Yes, that is exactly what I ran and it worked.
    Kernel: 2.2.12-20
    java -fullversion
    java full version "Linux_JDK_1.2.2_RC4"
    That was to install.
    Eric
    "Mo Guangquan" <[email protected]> wrote in message
    news:[email protected]...
    Hello,
    Could you give the detailed steps when you unzip and run? Did you only
    use the command "java -cp weblogic610_generic.zip install -i console" andit
    worked fine? Your system's basic setting like java version and kernal etc?
    Thanks.
    regards
    mo
    "Eric Gross" <[email protected]> wrote in message
    news:[email protected]...
    I actually did my test with RH 6.1. It worked fine.
    Regards,
    Eric
    "Alexander Klimenko" <[email protected]> wrote in message
    news:[email protected]...
    Sorry guys,
    but if you go to "supported platform" document you'll se just Linux RH
    7.1
    there.
    Regards,
    Alexander
    "Mo Guangquan" <[email protected]> wrote:
    error still occurs, guess it is because inside the zip file got some
    wrong
    absolute paths. error msg:
    ZGUtil.getInputStream(): ZGUtil.openZipFile(): Couldn't open /us
    java.io.IOException: ZGUtil.openZipFile(): Couldn't open /us
    at ZeroGb.c([DashoPro-V1.2-120198])
    at ZeroGb.a([DashoPro-V1.2-120198])
    at ZeroGb.a([DashoPro-V1.2-120198])
    at ZeroGb.m([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.Main.i([DashoPro-V1.2-120198])
    at
    com.zerog.ia.installer.Main.<clinit>([DashoPro-V1.2-120198])
    at install.main([DashoPro-V1.2-120198])
    preinstaller.properties not found.
    Exception in thread "main"
    regards,
    mo
    "Eric Gross" <[email protected]> wrote in message
    news:[email protected]...
    Run the following to install it:
    java -cp weblogic610_generic.zip install -i console
    That will provide a console based install.
    Regards,
    Eric
    "mo" <[email protected]> wrote in message
    news:[email protected]...
    Weblogic Server 6.1 trial version fails to install in Linux
    (in Linux Redhat 6.2, jdk 1.2.2)
    1. When unzipping the *.zip file "weblogic610_generic.zip", the
    unzip
    program
    reported that some files and directories not properly named.
    (using
    winzip, quite
    a number of files' directories start "d:/".
    2. During installation, the screen hanged right after choosing
    language,
    and the
    background threw "Exception in thread 'main'".

  • JWSDP 1.1 fails to install on Linux/JDK 1.4.1_01

    I just tried to install JWSDP 1.1 on Linux with a JDK 1.4.1_01 and failed miserably. That happened both when doing the install as root or as normal user. The installer displays an error page without any error message. The log.txt contains the following exception:
    (Feb 28, 2003 2:43:08 PM), Setup.product.install, com.installshield.product.service.product.PureJavaProductServiceImpl$Installer, err, ServiceException: (error code = 315; message = ""; severity = 0)
    STACK_TRACE: 22
    ServiceException: (error code = 315; message = ""; severity = 0)
    at com.ibm.wizard.platform.linux.LinuxRegistryServiceImpl.getPackageInfo(LinuxRegistryServiceImpl.java:221)
    at com.ibm.wizard.platform.linux.LinuxRegistryServiceImpl.getSoftwareObject(LinuxRegistryServiceImpl.java:144)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.installshield.wizard.service.LocalImplementorProxy.invoke(LocalImplementorProxy.java:52)
    at com.installshield.wizard.service.AbstractService.invokeImpl(AbstractService.java:51)
    at com.installshield.product.service.registry.GenericRegistryService.getSoftwareObject(GenericRegistryService.java:120)
    at com.installshield.product.service.product.PureJavaProductServiceImpl.setSoftwareObject(PureJavaProductServiceImpl.java:1582)
    at com.installshield.product.service.product.PureJavaProductServiceImpl.access$14(PureJavaProductServiceImpl.java:1578)
    at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.addToVPD(PureJavaProductServiceImpl.java:4662)
    at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.checkInstalledVersion(PureJavaProductServiceImpl.java:4632)
    at com.installshield.product.service.product.InstallableObjectVisitor.visitSoftwareObject(InstallableObjectVisitor.java:252)
    at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBean(InstallableObjectVisitor.java:171)
    at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:122)
    at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4355)
    at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3590)
    at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:40)
    at java.lang.Thread.run(Thread.java:536)
    Has anyone had similar problems?
    A few general remarks for Sun:
    I only needed JAXB 1.0, why do I have to get the whole JWSDP? Why do I have to deal with this @$#! installer?

    I did,
    installation with 1.4.0_03 and running under 1.4.1_02.
    It does work so far.
    I would like to know what this is all about - but I don't
    want to invest my time in something stupid like that.
    Makes you wonder how Sun tests their own software before
    they release it.
    Cheers,
    Torsten
    <quote>
    This release of the Java Web Services Developer Pack has been tested with various configurations with the Java 2 SDK, Standard Edition version 1.3.1_07, 1.4.0_03, and 1.4.1_01 on the following platforms:
    * Sun SolarisTM Operating Environment 8 and 9
    * Windows 2000 Professional Edition
    * Windows XP Professional Edition
    * RedHat Linux 7.2
    </quote>
    well, I tried 1.4.1_01 as well - and - surprise - it didn't work
    either ?!

  • Net configuration assistant fail on install under linux

    Hi,
    after a crash of our server. I tried to install oracle 9i release 2. Everything is working, but on install die net configuration assistant failed. How can I start it up after install? The database is already created by the installer.
    thanks a lot,
    Remco Ploeg

    Your locales are cooked. Use dpkg-reconfigure locales, select your local language (both en_US versions for me), C as your default, and you should be set.

  • Linux 6.4 fails to install "Oracle Linux NTFS how-to"

    HI
    a total linux newbie here.
    I am running the latest x86_64 oracle linux Red Hat Enterprise Linux Server release 6.4 (Santiago)
    I have followed the instructions at : Oracle Linux NTFS how-to
    I manage to do :
    wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
    rpm -Uvh rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
    yum install fuse fuse-ntfs-3g
    however this gives me
    Loaded plugins: refresh-packagekit, security
    Setting up Install Process
    Package fuse-2.8.3-4.el6.x86_64 already installed and latest version
    Resolving Dependencies
    --> Running transaction check
    ---> Package fuse-ntfs-3g.x86_64 0:2013.1.13-2.el5.rf will be installed
    --> Finished Dependency Resolution
    Dependencies Resolved
    =========================================================================================================================================================================================
    Package Arch Version Repository Size
    =========================================================================================================================================================================================
    Installing:
    fuse-ntfs-3g x86_64 2013.1.13-2.el5.rf rpmforge 586 k
    Transaction Summary
    =========================================================================================================================================================================================
    Install 1 Package(s)
    Total download size: 586 k
    Installed size: 1.4 M
    Is this ok [y/N]:
    Downloading Packages:
    http://apt.sw.be/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror1.hs-esslingen.de/repoforge/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://be.mirror.eurid.eu/rpmforge/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror.cpsc.ucalgary.ca/mirror/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://ftp.fi.muni.cz/pub/linux/repoforge/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://repository.vsb.cz/mirrors/repoforge/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://merlin.fit.vutbr.cz/mirrors/repoforge/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://fr2.rpmfind.net/linux/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mir01.syntis.net/repoforge/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror.atrpms.net/repoforge/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror.de.leaseweb.net/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://ftp.heanet.ie/mirrors/ftp.freshrpms.net/pub/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://thammuz.tchpc.tcd.ie/mirrors/ftp.freshrpms.net/pub/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror.fairway.ne.jp/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://ftp.riken.jp/pub/Linux/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror.oscc.org.my/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror.nl.leaseweb.net/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://archive.cs.uu.nl/mirror/dag.wieers/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://ftp.lug.ro/freshrpms/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror.awanti.com/rpmforge/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://ftp.is.co.za/mirror/ftp.rpmforge.net/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://www.mirrorservice.org/sites/apt.sw.be/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://repoforge.spinellicreations.com/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror.teklinks.com/repoforge/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror.hmc.edu/repoforge/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror.rit.edu/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://repoforge.eecs.wsu.edu/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://nl.mirror.eurid.eu/rpmforge/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror.us.leaseweb.net/dag/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    http://mirror-fpt-telecom.fpt.net/repoforge/redhat/el6/en/x86_64/rpmforge/RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
    Trying other mirror.
    Error Downloading Packages:
    fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64: failure: RPMS/fuse-ntfs-3g-2013.1.13-2.el5.rf.x86_64.rpm from rpmforge: [Errno 256] No more mirrors to try.
    Any ideas?

    You should get the following output:
    [root@vm210 ~]# lsb_release -d
    Description:     Oracle Linux Server release 6.4
    [root@vm210 ~]#
    [root@vm210 ~]# rpm -Uvh rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
    warning: rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID 6b8d79e6: NOKEY
    Preparing...                ########################################### [100%]
       1:rpmforge-release       ########################################### [100%]
    [root@vm210 ~]# yum install fuse fuse-ntfs-3g
    Loaded plugins: security
    ol6_UEK_latest                                                                 | 1.2 kB     00:00    
    ol6_latest                                                                     | 1.4 kB     00:00    
    ol6_latest/primary                                                             |  26 MB     02:39    
    ol6_latest                                                                                21127/21127
    rpmforge                                                                       | 1.9 kB     00:00    
    rpmforge/primary_db                                                            | 2.6 MB     00:07    
    Setting up Install Process
    Resolving Dependencies
    --> Running transaction check
    ---> Package fuse.x86_64 0:2.8.3-4.el6 will be installed
    ---> Package fuse-ntfs-3g.x86_64 0:2013.1.13-2.el6.rf will be installed
    --> Finished Dependency Resolution
    Dependencies Resolved
    ======================================================================================================
    Package                 Arch              Version                        Repository             Size
    ======================================================================================================
    Installing:
    fuse                    x86_64            2.8.3-4.el6                    ol6_latest             71 k
    fuse-ntfs-3g            x86_64            2013.1.13-2.el6.rf             rpmforge              483 k
    Transaction Summary
    ======================================================================================================
    Install       2 Package(s)
    Total download size: 554 k
    Installed size: 1.7 M
    Is this ok [y/N]: y
    Downloading Packages:
    (1/2): fuse-2.8.3-4.el6.x86_64.rpm                                             |  71 kB     00:00    
    (2/2): fuse-ntfs-3g-2013.1.13-2.el6.rf.x86_64.rpm                              | 483 kB     00:01    
    Total                                                                 160 kB/s | 554 kB     00:03    
    Running rpm_check_debug
    Running Transaction Test
    Transaction Test Succeeded
    Running Transaction
    Warning: RPMDB altered outside of yum.
      Installing : fuse-2.8.3-4.el6.x86_64                                                            1/2
      Installing : fuse-ntfs-3g-2013.1.13-2.el6.rf.x86_64                                             2/2
      Verifying  : fuse-ntfs-3g-2013.1.13-2.el6.rf.x86_64                                             1/2
      Verifying  : fuse-2.8.3-4.el6.x86_64                                                            2/2
    Installed:
      fuse.x86_64 0:2.8.3-4.el6                  fuse-ntfs-3g.x86_64 0:2013.1.13-2.el6.rf                
    Complete!Your output:
    <pre>
    Package fuse-2.8.3-4.el6.x86_64 already installed and latest version
    Resolving Dependencies
    --> Running transaction check
    ---> Package fuse-ntfs-3g.x86_64 0:2013.1.13-2. el5 .rf will be installed
    </pre>
    It tells me that you perhaps tried to install the software before finding or following the instructions. If you check the fuse-ntfs-3g package of your output, it belongs to el5, not el6.
    I suggest to check /etc/yum.repos.d directory. It seems you have enabled or installed the wrong yum software repository from the rpmforge source.
    To solve your problem, perhaps the following will work:
    su - root
    yum remove rpmforge-release
    cd /etc/yum.repos.d
    tar -cf backup.tar ./* --remove-files
    wget http://public-yum.oracle.com/public-yum-ol6.repo
    wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
    rpm -Uvh rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
    yum install fuse fuse-ntfs-3gThe following does not seem absolutely necessary, but might be a good idea:
    Once you installed the rpmforge-release package you should be able to use:
    yum update rpmforge-release
    Loaded plugins: security
    Setting up Update Process
    Resolving Dependencies
    --> Running transaction check
    ---> Package rpmforge-release.x86_64 0:0.5.2-2.el6.rf will be updated
    ---> Package rpmforge-release.x86_64 0:0.5.3-1.el6.rf will be an update

  • SunOne 7 Fails To Install - Mandrake Linux 10

    Hi, my system:
    - Mandrake Linux 10 (Community)
    - Kernel 2.6.6
    - KDE 3.2
    I tried to install SunOne 7 Platform Edition updates 2, 3 and 4, everytime I launch the ./setup (as root), the result is the initial screen with the following error:
    appservResources:LinOSCheckPanel-Gui-HeaderText
    appservResources:LinOSCheckPanel-unsupportedOS-Text
    And Just the "cancel" button available.
    The I tried to start with -debug option
    java appserv -debug
    Give me the following results (console) :
    Enabling debug mode.
    Using long form attribute offset calculation.
    Time to find offset table: 62ms
    archiveReader class com.sun.wizards.core.ArchiveReader has length 27219
    archiveReader class com.sun.wizards.core.Platform has length 7176
    archiveReader class com.sun.wizards.core.SystemInterface has length 9819
    archiveReader class com.sun.wizards.core.PlatformToolkit has length 3134
    archiveReader class AixNativeToolkit has length 15854
    archiveReader class SolarisPlatformToolkit has length 17266
    archiveReader class LinuxNativeToolkit has length 10697
    archiveReader class WindowsPlatformToolkit has length 16366
    archiveReader class WindowsNativeToolkit has length 17953
    archiveReader class HpuxNativeToolkit has length 11420
    archiveReader class LinuxPlatformToolkit has length 10110
    archiveReader class Osf1NativeToolkit has length 20329
    archiveReader class Osf1PlatformToolkit has length 17213
    archiveReader class AixPlatformToolkit has length 13323
    archiveReader class WindowsBootstrap has length 4046
    archiveReader class HpuxPlatformToolkit has length 13975
    archiveReader class SolarisNativeToolkit has length 20355
    Unable to find class: com.sun.wizards.core.MsgCat
    Extracting...Using long form attribute offset calculation.
    Time to find offset table: 60ms
    ...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Unable to find class: com.sun.wizards.WizardResources_pt
    Unable to find class: com.sun.wizards.WizardResources_pt_BR
    Initializing...VM: osName="Linux"
    VM: osArch="i386"
    VM: osVer="2.6.6-mh1"
    osType=1
    osName=2
    arch=2
    currentVersion is 2.6.6-mh1
    platformNameClass=LinuxPlatformToolkit
    trying to instantiate LinuxPlatformToolkit . . . success
    systemInterface created.
    writing native stuff to /tmp
    nativeProcessAvailable=true
    com.sun.wizards.core.Def instantiated.
    system locale = pt_BR
    initial default locales = []
    Unable to find class: com.sun.wizards.WizardResources_pt
    Unable to find class: com.sun.wizards.WizardResources_pt_BR
    Unable to find class: com.iplanet.ias.installer.resource.appservResources_pt
    Unable to find class: com.iplanet.ias.installer.resource.appservResources_pt_BR
    com.iplanet.install.util.wbResource::setResourceBundleKeyName: resource bundle key name is "com.iplanet.ias.installer.resource.appserv"
    com.iplanet.install.util.wbResource::setResourceBundleKeyName: os name "Linux" os type "Unix"
    Unable to find class: com.iplanet.ias.installer.resource.appservResources_pt
    Unable to find class: com.iplanet.ias.installer.resource.appservResources_pt_BR
    Command line to be processed:
    -debug
    com.iplanet.install.util.wbResource::getString: resource string "appservResources:LinOSCheckPanel-Gui-HeaderText" not found
    com.iplanet.install.util.wbResource::getString: resource string "appservResources:LinOSCheckPanel-unsupportedOS-Text" not found
    com.iplanet.install.util.wbResource::getString: resource string "appservResources:LinOSCheckPanel-Gui-OnlineHelp" not found
    Unable to find class: com.sun.wizards.WizardResources_pt
    Unable to find class: com.sun.wizards.WizardResources_pt_BR
    Deleting file /tmp/LinuxNativeToolkit_5.5.1_1
    Deleting file /tmp/j2sdk-1_4_1_04-linux-i586.rpm.rpm.out0.432396
    I am totally lost, :-/
    Can you help me ?
    Thank you very much
    Claudio Miranda

    Sun Java System Application Server 7 installer explicitly checks for supported Linux kernel versions (2.4 and 2.5) and will not let you proceed with installation if different kernel version is detected. Since Mandrake Linux 10 is running 2.6 kernel, you will not be able to install this version of application server on this system.

  • I cannot finish installation of J2SE SDK, help!!!

    I downloaded J2SE SDK v1.4.2.05, and installed on Windows 2000 Professional with SP4.
    But the installation always waits endlessly on status:
    Finishing installation, please wait. This may take several minutes.
    It never success after my many times retries.
    I donnot know why. It's the first time I meet such a problem.
    If I terminate the installation forcely, the next J2ME installation won't find the j2se and report error.
    Do you have the same experiences?
    Please help me to resolve the boring prolem.
    Thanks.

    Did you wait for "several minutes"? This can take up to 5 minutes and longer! I also noticed this since the first 1.4 SDKs when i installed with the Windows installer. I also thought that it crashed but it continued after many minutes (5-10 minutes ...). I have no idea why this takes so long on a GHz server computer, but just give it a try.

  • J2SE v 1.4.2_04 SDK on Linux (ubuntu) install problem

    I've seen this question posted on this forum a number of times but no-one seems to know the answer. I would love an answer to this as have already spent far too much time trying to sort it out.
    I am trying to install the j2me mobile development kit: J2SE v 1.4.2_04 SDK with NetBeans 3.6 Bundle, on Linux ubuntu ...
    I download the file from this site ....
    I follow the instructions on the site:
    I do the chmod and this works ok
    I type ./j2sdk-1_4_2_04-nb-3_6-bin-linux.bin ( this is the instruction from Sun)
    and then get the error message:
    bash: j2sdk-1_4_2_04-nb-3_6-bin-linux.bin: command not found
    What's the solution? Any ideas?
    thanks

    try :
    sh jdkblahblhabl.bin
    But there is a debian way to install it see links at http://rzr.online.fr/q/Java

  • Installation error:  Cannot find a J2SE SDK installed at path C:\Program Fi

    I am installing latest version of SQL Developer, Release 1.2. I have Sun Java 2 Standard Edition Version 1.5.0 (build 1.5.0_10-b03). When I browse and select the java.exe found it comes up with error: Cannot find a J2SE SDK installed at patch
    C:\Program Files\Java\jre1.5.0_10
    I am installing the version I downloaded for Windows systems with JDK1.5.
    I have tried on two different machines.
    Any ideas?

    This is going to seem loooong, but comprehensive.
    I'd initially always suggest using the bundled
    package, since that's supposed to be a tested and
    proven combination.You know what, I'm gonna be mighty surprised if you're implying that Oracle hasn't 'tested and proven' the releases at http://www.oracle.com./technology/software/products/sql/index.html other than the first 77 MB download labeled Oracle SQL Developer for Windows... :)
    After having problems with a graphics card for
    example, installing the latest JDK might be
    indicated.Huh?!? Not a clue what you're talkin' 'bout! :S
    It's also easy for users who don't know which Java
    version to download, or even where to find it! You
    guys have proven that: although it's stated you need
    .First of all, it says right there on the download page (http://www.oracle.com./technology/software/products/sql/index.html) that:
    "JDK 1.5 (JDK 5.0) is required. This is the minimum JDK version required"
    And we've "proven that [..] although it's stated you need the JDK, [we]'ve tried running with the JRE" and have NOT been able to run the application. It just presents the user a dialog box to locate the 'SDK' manually and exits gracefully if you try to dismiss it. So, conclusively proven, the JDK (or as SQL Developer puts it, Java SDK) is required- QED.
    And given users might have several versions running
    on the same machine (I have half a dozen), sqldev
    could easily pick up a wrong version.And every JRE installation (atleast all of Sun's) make sure they update the default (via PATH and other required system variables) JRE point to the latest one installed. So if you have anything 1.5+ you're good to go; if not, you've got an incompatile JRE. Doesn't sound that hard to me!
    As for being bulky, even without the bundled JDK, it
    still is.Ya missed the point. Developers are making Java applications bulkier by including the JRE/JDK with their distributions. A SQL Developer release sans JDK is about 46 MB; with JDK that climbs to 77 MB (sizes quoted from download page linked above).
    Imagine what happens when you have, besides SQL Developer (JDK 1.5 included), some-cool-java-app that also includes the JRE/JDK it was built on; and then another-java-app that also includes a JRE/JDK... I bet JDeveloper also comes with a JDK bundled in. So, now you have FOUR copies of JRE/JDK (aside from the "have half a dozen" that probably installed themselves via Java Update Checker)!
    Here's the big picture, the savings in disk space would only be the beginning of your benefits. Here's a few others:
    - Class Data Sharing (http://java.sun.com/javase/6/docs/technotes/guides/vm/class-data-sharing.html) introduced in Java SE 5.0 provides for storing definitions of commonly used classes in a representation closer to machine code, even closer than bytecode, this reducing load and startup time. Plus all VM's launced using that particular distribution get to share the cache- Performace+ !!
    Running each app offa' it's own VM just causes multiple caches to be loaded. You just multiplied your losses! :(
    - Sun is currently working on a way to have applications simply inject into a running JVM. That way, there is no load and startup time for the JVM, just the time to load you app classes. Using different distros would completely defeat this!
    (The reason why this feature isn't out yet is because they're still trying to make it possible to specify hitherto VM configurations like security and logging as application configurations. Then there's also the issue of setting up class loading boundaries between applications.
    You say you don't have to bring over the VB runtime
    for each app? I remember in the 90's doing it all the
    time. Of course, being MS, now that's not necessary
    anymore, since it's "magical" Windows. I don't have
    any machine from Sun, but for sure they've got Java
    bundled with it, right?I don't believe you had to do that since VB 5; and that's because MS realized that they messed up on this very point upto then! Sun worked the simple solution to that into their deployment strategy- install only ONE runtime and run all apps off that. As for you're half-a-dozen, I think you can safely uninstall the five older versions; because, even today, people are running apps developed using JDK1.1 on Java SE 6.0!
    Again, I find the most logical difference between JRE
    and JDK being the debugger. As you say it yourself:
    JRE for end-users, who don't need to do any
    debugging.
    Now, sqldev is not just a table browser, but also for
    debugging PL/SQL. 1 + 1 = 2.I think it's a little naive to differentiate between the JRE and JDK on just the debugger! Aside from the obvious inclusion of a compiler, the JDK has several other tools for monitoring/managing the heap, threads and logging on the fly. There's also the Doclet API and Sun's javadoc implementation, dev interfaces for instrumenting the VM, native interfaces, ...
    And I reiterate, we're talkin' PL/SQL developers here. Why would I want to give a PL/SQL developer a Java Development Kit?!? ;|
    Nevertheless, as said in the other thread, if the
    team discloses how to circumvent the SDK check at
    startup, you can go ahead and use the JRE. In any
    case, you'd have to agree that won't work as
    out-of-the-box solution...You're right, it won't work like a standard Windows OOTB app. But, it WILL work as a Java OOTB that only mandates that there be a JRE available; just like the scores of Java apps out there- from tiny little Pong clones to large IDE's like NetBeans.
    BTW, don't even think about quoting Websphere/Rational/Eclipse as counter-arguments. They are the biggest offenders as far as this issue goes. And jikes is an abomination, a curse Sun must carry as a result to opening the VM Spec. But, I digress...

  • Oracle 11gR1 on Windows Xp Error Cannot find J2SE SDK installed at path

    When I type in path for java.exe in SQL Dev. , I get error 'Cannot find J2SE SDK installed at path: C:\Program Files\Java\jre6.' when I entered the path C:\Program Files\Java\jre6\bin\java. What is the reason for this error? How can I correct it? Database installation said it was successful

    SQL Developer needs the Java JDK not the JRE to operate successfully. Your path looks like a path to the JRE. There is a windows download that comes complete with a Java Developer kit.
    regards
    Niall

  • When SDDM x64 says "Cannot find a J2SE SDK installed at ..."  what is it actually looking for?

    First of all,please forgive me if this question has been answered before, but search facilities in this new forum are even more rubbish than the old one, which is an achievement I wouldn't have thought possible.
    Anyhoo.
    I have downloaded the 64-bit version of Data Modeller, which comes without the JRE.
    I have installed JDK1.3.0.21.  I have subsequently also downloaded and installed JRE 1.7u21.  However when I run datamodellerx64.exe for the first time it hurls with this message:  "Cannot find a J2SE SDK installed at C:\Program Files\Java\jdk1.7.0_21\bin".     It also doesn't like  C:\Program Files\Java\jre7\bin  (under the JDK install) or .C:\Program Files (x86)\Java\jre7\bin (the JRE install)
    So what path does it actually want?
    I suppose I could download and install the 32-bit version with the inbuilt JRE but that would be a pretty sorry workaround.
    Cheers, APC
    Message was edited by: APC - just realised I had typed "with the JRE" instead of "without", which is actually the entire source of the issue.  Doh!

    The first time you start up Data Modeler, it should prompt for the Java home.  You should select the java.exe file within the jre\bin folder of a Java JDK.
    Thanks!  This was the bit which was confusing me.  What I needed was C:\Program Files\Java\jdk1.7.0_21\jre\bin\java.exe
    Of course, then I get a message telling me that versions above 1.6 are not certified, but I'm not installing a monstrous rootkit on my new laptop simply to run SDDM, so I guess I'll just rub along without the certification.   It seems to start up just fine.
    Cheers, APC

  • Problem installing SQLdeveloper. Cannot find a J2SE SDK error

    I am trying to install SQL developer in my windows 7 64 bit machine. It is asking for the java path when clickin the sqldeveloper.exe. I am giving the path of java as C:\Program Files (x86)\Java\jre6\bin where i have java application file available. but i am getting cannot find a j2se SDK installed in the above path error. Please help

    Hello,
    please ask this in the appropriate forum: {forum:id=260}
    It seems to be a common problem
    https://forums.oracle.com/forums/search.jspa?objID=f260&q=win+64bit
    Regards
    Marcus
    Edited by: Marwim on 12.10.2011 10:59
    added search link

  • Cannot find a J2SE SDK installed at path C:\Program Files\Java\jre6

    Hi,
    I am trying to install the latest version of SQL Developer 3.0 on my brand new Windows7(64-bit) computer. I already installed the Java SDK6 (Update26). Unfortunatelly I am forcing some problems.
    When I start the sqldeveloper.exe for installing - at the beginning when I browse and select the java.exe an error comes up:
    Cannot find a J2SE SDK installed at path C:\Program Files\Java\jre6
    Why isn't it working?
    Can you help me? Any ideas?
    Thanks a lot!

    That's because you are trying to run SQLDeveloper with a JRE not a JDK.
    Since you already installed a JDK you should have a folder labeled
    jdk1.6.0_26in your C:\Program Files\Java directory.
    If you cant find the proper JDK in your system the 64 bit version for windows can be found here:
    http://download.oracle.com/otn-pub/java/jdk/6u26-b03/jdk-6u26-windows-x64.exe

  • Cannot find a J2SE SDK installed at path...

    I posted this in the SQL-Deveolper forum, but perhaps it is better posted here, since it is a Java issue.
    I found a thread for this same problem from 2007, but did not find an answer for it.
    I'm installing sql-developer on a Windows7 machine 64bit. When I go to run the exe, I get the popup:
    "Cannot find a J2SE SDK installed at path: C:\Program Files\Java\jre7."I've downloaded and installed a couple of jdk's to fix this:
    jdk-6u37-windows-x64.exe
    jdk-7u9-windows-x64.exe
    These did not work.
    Can anyone tell me what I need to download to get this to work and where I can find it?
    Thanks,

    I realized we have another wiindows machine that runs sql-developer just fine. I copied the jdk-6u25-windows-x64.exe from that machine and installed on the newer one. The install complained that a new version of java was already installed. But, the older version works where the newer one did not - does not.
    So I'm good. But it would be nice to know why the new versions do not include all the foo that seems to make sql-developer work.

  • Semi-Colon error when installing J2SE SDK

    Hello!
    When I try to install J2SE SDK I get error:
    "A path with semi-colon in it, is not supported for this product. Please select a directory path without a semi-colon."
    The path is:
    C:\j2sdk1.4.2_09\
    Please help!

    Use this installer
    http://www.microsoft.com/downloads/details.aspx?familyid=889482FC-5F56-4A38-B838-DE776FD4138C&displaylang=en
    That was usefull by me and ohters (forum where I find it), i was that problem when i re installed my XP SP2 with UE installer, any version of JSDK was fuctioning by me (1,4.. 1,6). then all was OK
    Try it
    http://www.microsoft.com/downloads/details.aspx?familyid=889482FC-5F56-4A38-B838-DE776FD4138C&displaylang=en

Maybe you are looking for

  • Importing to iphoto 08

    Hi, I'm new to iphoto 08, I've been trying it out for the last few days and I now wants to use it as by photo organizer. I have about 30gb of photos presently organized into folders years and months and now I want to import them to iphoto. Do I just

  • Sales Order Open Quantity

    Hello Folks, I am trying to calculate the open sales order quantity for a particular material and plant combination. Can you please provide me with the table and field where the open sales order quantity is stored. If it is a manual calculation, can

  • How do you set "All" sequence?

    I have two iPods - an 8G Nano and an 80G iPod. Say I go to Music, then Genre and I select a genre, say Classical . . . I puts me on a page called Artists. If I hit "All" again it gives me "All Albums" and if I hit "All" again it gives me "All Songs".

  • ODT 11.1.0.5.10

    Does ODT 11.1.0.5.10 beta support work with Oracle 9i database server? Will the production release of this product support work with Oracle 9i? Eugene.

  • Rendering of css different in Firefox vs IE8

    I created an external style sheet to define a:link (color light grey), a:visited (light purple), a:hover (light red) and  a:active (also light red) to apply to a text and an associated image's border. Firefox renders it correctly but IE8 does not ass