Jar file containing: com.sap.aii.messaging.adapter.Conversion package??

Hi! Gurus
Can you please let me know the name of the Jar/library file containing com.sap.aii.messaging.adapter.Conversion package.
Your help is greatly appreciated!!
Thank you,
Patrick

> Can you please let me know the name of the Jar/library file containing com.sap.aii.messaging.adapter.Conversion package.
aii_msg_runtime.jar
http://wiki.sdn.sap.com/wiki/display/XI/WheretogetthelibrariesforXI+development

Similar Messages

Com.sap.aii.messaging.adapter.trans.TransformException:'java.lang.NullPoint

Hi, This is Prasad
We are using 7.0 with SP15, i am using MTB module at receiver side ,we are getting following error.
Message processing failed. Cause: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'java.lang.NullPointerException'; nested exception caused by: java.lang.NullPointerException
And we are passing following FCC Parameters
Transform.Class = com.sap.aii.messaging.adapter.Conversion
Transform.ContentType = text/xml;charset=utf-8
xml.Record.fieldFixedLengths
xml.Recordset.fieldSeparator
xml.conversionType= StructXML2Plain
xml.recordsetStructure = Recordset,Record
Please help me out ASAP

Hi Stefan,
I am a little bit confused with the parameter "Transform.ContentType".
According to your post it should be "TransformContentType" but the document has not yet been updated. At least when I search within SDN for the document I still get the old version with the dot.
In addition there is OSS note 1131655 from September 2008 (pretty new) and there SAP still refers to parameter "Transform.ContentType".
So, I assume the parameter with the dot is the correct one, right?
Klaus

Com.sap.aii.messaging.util.URI$MalformedURIException: invalid port number

Experts,
My scenario is sync File to SOAP.
I am using File - bpm - soap - bpm - file.
I am trying to send a query to google in file with SOAP message and expecting a response back.
But in SOAP Adapter I am getting this error.
com.sap.aii.messaging.util.URI$MalformedURIException: invalid port number
2008-04-05 07:49:31 Success Message successfully received by messaging system. Profile: XI URL: http://xibox:50000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2008-04-05 07:49:31 Success Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the request queue.
2008-04-05 07:49:31 Success Message successfully put into the queue.
2008-04-05 07:49:31 Success The message was successfully retrieved from the request queue.
2008-04-05 07:49:31 Success The message status set to DLNG.
2008-04-05 07:49:31 Success Delivering to channel: CC_SOAP_Google
2008-04-05 07:49:31 Success MP: entering
2008-04-05 07:49:31 Success MP: processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
2008-04-05 07:49:31 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-04-05 07:49:31 Error SOAP: call failed: com.sap.aii.messaging.util.URI$MalformedURIException: invalid port number:
Could you pls tell me which piece I missed?
Regards,
AV.

I'm sending below SOAP message.
<?xml version='1.0' encoding='UTF-8'?>
<soap11:Envelope
   xmlns="urn:GoogleSearch"
   xmlns:soap11="http://schemas.xmlsoap.org/soap/envelope/">
<soap11:Body>
    <doGoogleSearch>
     
<key>1</key>
      <q>shrdlu winograd maclisp teletype</q>
      <start>0</start>
      <maxResults>10</maxResults>
      <filter>true</filter>
      <restrict></restrict>
      <safeSearch>false</safeSearch>
      <lr></lr>
      <ie>latin1</ie>
      <oe>latin1</oe>
    </doGoogleSearch>
</soap11:Body>
</soap11:Envelope>

Com.sap.aii.messaging.util.URI$MalformedURIException: no scheme

Hello Experts,
We are still configuring our XI in a RFC-XI-SOAP Scenario. We did all the Interface- and Message- Mapping, we configured our Business System and Business Services. But if we send a message from our R/3 4.6c system to the Web Service via the XI, we receive the following error messages: MP: exception caught with cause com.sap.aii.messaging.util.URI$MalformedURIException: no scheme. The error appears in the SOAP Adapter together with a com.sap.aii.af.ra.ms.api.RecoverableException with the message no scheme.
Does anyone know, why this error appears? What can we do to avoid this error?
Thanks for the answer! I appreciate every kind of answer.
Im looking forward to read your answers.
Best Regards
Philipp

Hello Bhavesh,
after we have checked the SOAP Receiver, we got the following exception:
<i>ErrorCode: GENERAL ErrorText: com.sap.aii.af.ra.ms.api.DeliveryException: Connection timed out: connect</i>.
Does this error show that we are through with our customizing?? Or is this still a problem on our xi??
Best Regards
Philipp

Replacement of com.sap.aii.messaging.lang.Binary; in PI7.11

Hi,
After upgrade to PI7.11 from XI3.0,I am trying to adapt an adapter module which uses following import statement:
import com.sap.aii.messaging.lang.Binary;
But I am not able to find the equivalent in PI7.11.
Can anyone please let me know.
Thanks.
Regards,
Shweta

import com.sap.aii.af.service.cpa.BinaryData worked.

Unable to start service 'com.sap.aii.adapter.jms.svc'

Hi people,
After I have successfully deployed the external drivers jdbc/jms drivers on a PI 7.1 system trough JSPM using the com.sap.aii.adapter.lib.sda file but now the com.sap.aii.adapter.jms.svc and the com.sap.aii.adapter.jdbc.svc do not want to start up. When checking the log DefaulTrace log file I found the following error Reported reason: Service com.sap.aii.adapter.jms.svc is not loaded Any ideas on what the problem could be?

Hi people,
Thanks for all the ideas. I have followed all the notes and guides to prepare the SDA file ie editing the XML file and adding the JAR files.
The problem was that somewhere along the line the provider.xml file of the old aii_af_jmsproviderlib.sda and the new com.sap.aii.adapter.lib.sda file seeming ot "merged" during my struggles.
The provider.xml file of the SDA which I tried to uploaded had the two reference entries which actually belong to the old aii_af_jmsproviderlib.sda in as well as the correct reference entry. Once I removed these incorrect reference entries the services started up correctly.
I found the error mention above by firstly renaming the DefaultTrace_X.trc file and restarting the JAVA stack. I then stepped through each line of the newly created DefaultTrace_X.trc file from the top down and found the following entries:
1) Cannot resolve component library:sap.com/com.sap.aii.adapter.lib because referenced component Reference strong to library com.sap.aii.messaging.runtime not found#
2) Cannot resolve component service:sap.com/com.sap.aii.adapter.jdbc.svc because referenced component library:sap.com/com.sap.aii.adapter.lib not resolved#
3) Cannot resolve component service:sap.com/com.sap.aii.adapter.jms.svc because referenced component library:sap.com/com.sap.aii.adapter.lib not resolved#
In line line 1 I saw that it was referencing the com.sap.aii.messaging.runtime which seemed suspect. Luckily I still had the original SDA file and when comparing it to the uploaded SDA file I found the incorrect entry.
Thanks again for all the help

Where can I find com.sap.aii.proxy.xiruntime.core.* library?

Hi all,
some of you now where is the .JAR that contains the com.sap.aii.proxy.xiruntime.core.* api's? Generated java proxies from PI 7.0 are using many classes at this package, and I couldn't find it... some tip?
Thank you!
regards!
roberti

Roberti,
You can get them from this location in XI Server:
aii_proxy_xirt.jar C:usrsapJ2EJC00j2eeclusterserver0 inextcom.sap.aii.proxy.xiruntime
aii_msg_runtime.jar C:usrsapJ2EJC00j2eeclusterserver0 inextcom.sap.aii.messaging.runtime
aii_utilxi_misc.jar C:usrsapJ2EJC00j2eeclusterserver0 inextcom.sap.xi.util.misc
guidgenerator.jar C:usrsapJ2EJC00j2eeclusterserver0 inextcom.sap.guid
Also check this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d06315a6-e66e-2910-039c-ba8bbbd23702
Regards,
---Satish

Java Proxy error .... com.sap.aii.utilxi.misc.api.BaseException

Hello All,
I have generated a java proxy and trying to compile in Developer Studio. I am getting this error while doing so. I have all my jars in classpath.
com.sap.aii.utilxi.misc.api.BaseException
Below are the jars i have in my class path.. Anybosy has idea
aii_msg_runtime.jar
aii_proxy_xirt.jar
aii_utilxi_misc.jar
guidgenerator.jar
ejb20.jar
exception.jar
jARM.jar
sapj2eeclient.jar
sapxmltoolkit.jar
-Srinivas

Hi Srinivasa,
Other than that u can try importing these jars as well:
aii_adapter_xi_svc
aii_af_cci
aii_af_cpa
aii_af_mp
aii_af_ms_api
aii_af_ms_spi
aii_af_service_message_security
aii_msg_runtime
aii_proxy_xirt
aii_utilxi_misc
jperflib
jta
log_api
logging
sapni
It might help.
Thanks and Regards,
Sanjeev.

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550

Hi Experts,
We have many File to EDI scenarios wherein XI System pick up the XML and sent to customers via EDI. Recently we faced a problem so created a Back-up System (Production copy) and tested successfully. After sometime the messages were routed to this back-up system and when we notice it and then stopped the back-up system. All the messages that were routed to back-up system, we try to send the same messages from the actually Production system to our customers. Now the problem is XI system (Production system) is unable to pick these files and I check the communication monitoring and encountered the below error message.
Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550.550
Can anyone let me know how to fix the issue or what needs to be done?
Your help is highly appreciated.
Regards
Faisal

Hi,
It seems to be problem with permission of files. Please ask your basis to do following:
1. Set the permissions to FTP User you are using as 777 rights(full access to read , write and delete)
2.If you have access to PI server, try to telnet /connect to ftp using command prompt (open ftp .....) the FTP server form there, you should see the same error there , inform this to your network guys.
3.Clear all the files places already in the ftp (take backup) and test afresh after permissions are set by basis team.
Regards
Aashish Sinha

Com.sap.aii.adapter.file.ftp.FTPEx: 550

Hi,
I have the below error in my sender file channel. I also read the following thread
FTP Error
Error:
An error occurred while connecting to the FTP server '10.12.12.101:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 C:Inetpubftproot: The filename, directory name, or volume label syntax is incorrect. '. For details, contact your FTP server vendor.
The above thread suggests me to change the setting in the IIS. Should do that settings in the PI server or the source FTP server.
Also does anybody have any other solution to this problem.
Rgds,
Mithun

HI,
If you're using an FTP server you need to know the path to the file on the FTP.
To do this I suggest to connect to the FTP using Internet Explorer and navigating the FTP folders until reaching the right one.
Then on the url bar you should got something like this: "ftp://server:21/path/to/file/". Use "/path/to/file" as value for the file adapter configuration.
Please refer below blogs:
unable to send file to FTP server
FTP to Windows Server
thanks,

Com.sap.aii.adapter.file.ftp.FTPEx: 421

Hi Guys,
I am getting these two error messages:
1) com.sap.aii.adapter.file.ftp.FTPEx: 421 Maximum session time exceeded - closing
2) com.sap.aii.adapter.file.ftp.FTPEx: 421 Too many users - please try again later
when XI Sender File Adapter tries to pick the files from the FTP server.
I have not set any limit to the number of session for the user that I have mantianied in the adapter. (Niether I know it -:) how to set.)
Any idea or help, how to resove this error.
Thanks in adavance,
Namadev

Hi Namdev,
Your this error is coming as your FTP server maximum allowed connection is reached. so as the solution I would suggest to change the Connection mode property of your communication channel as Per File Transfer as default property is Permanently which reserves connection forever.
So other communication channels cannot communicate. Make this changes to all the communication channel you have configured.
And your problem is solved.
enjoy....
Thanks & Regards,
Gaurav Patwari

Com.sap.aii.adapter.file.ftp.FTPEx: 550 You are not allowed to issue this

hi All,
We are getting below error while connecting to an FTP location through File Adapter:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server XYZ. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 You are not allowed to issue this command'. For details, contact your FTP server vendor.
Also when we tried to connect to this FTP location through PI server we able to connect, but when we connect to it through channel we are getting above error.
Please Help!
Thanks,
Mayank

hi All,
The usedid we are using to connect to FTP location has appropriate access to write(we have an receiver file adapter) the files, when we connected to FTP location from PI server using same useid(as used in channel) we are able to connect to FTP location and also able to write the file there.
Now error soming is:
An error occurred while connecting to the FTP server XYZ. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Operation is not supported under Connect:Enterprise FTP server.'. For details, contact your FTP server vendor.
Thanks,
Mayank

'com.sap.aii.adapter.file.ftp.FTPEx: 501 Unknown error

Hello ,
I am facing an error in communication channel while trying to post the file to the FTP server,
The error is " Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '10.100.5.00:20'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Unknown error'. For details, contact your FTP server vendor"
Please could you advice what need to be done to resolve this.
Thanks ,
Siva

Hi ,
FTP 501 Error is: "Syntax error in parameters or arguments"
Also, i see that the ftp address and port mentioned in your case is:
10.100.5.00:20
Hence, i see three probable issues here.
1. FTP Port :
Just check if the FTP server's port number '20' mentioned in your case is open as this is the data connection port. Moreover, the default port mentioned while creating a file channel is 21. Just check about the port number '20' with the FTP server administrator if this port number is opened and functioning.
2. FTP server address:
Also, try giving your FTP Server's address as 10.100.5.0
3. Also, check if the FTP server is reachable from the PI Server by using a simple ping command.

FTP error-Unable to create new pooled resource: com.sap.aii.adapter.file.ft

Hi,
We have a scenario where XI receives a Idoc and based on the contents of Idoc, It will generate 5 different files and send it to the external FTP server.We configured 5 receiver channels for these 5 files.
When this interface runs, most of the files will be delivered but some of the messages will be errored out.
The receiver channel has shown the following error-
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: com.sap.aii.adapter.file.ftp.FTPEx
I tried to resend them by temperorily stopping other channels to reduce connections to this FTP server.But these messages again resulted with same error.
Can someone suggest what might be the cause for this error.
Thanks in advance.

Hi ,
As I am not sure about the problem so U just try all of the option I am writing below. It may help u as these are the probable solutions for this problem.
1.perform Full CPA cache refresh using PIDIRUSER
2.The problem seems to be in establishing the connection with the File server . This could be due to
a. Wrong user name or password in receiver adapter .
b. Firewall connection are not open
actually you are saying that some files are being delivered so all the file has to be deliverd on same server on diffrent directory or all files are going on diffrent server at present I am assuming that all files are going on diffrent server so please check UID & PWD properly.if they are on same server but diff. directory it can be easily done using one Communication channel only.
3. Finally please check the errorneous communication channel .
to check your communication channels are working fine or not you can check in channel monitoring in PI7.0, adapter monitoring in Xi3.0.
if you are on PI7.0, goto RWBCache monitoring select AE and cilck disply-select the date todays--check everything is greent here
4.Please check your maximal connection pool .
Regards,
Saurabh

Jar file containing: com.sap.aii.messaging.adapter.Conversion package??

Similar Messages

Maybe you are looking for