Java Applets do not run when UAC is enabled on Windows 7

HI,
I'm deploying Java 6.0_26-b03+ on Windows 7 and experiencing following problem:
Java applets do not run as standard domain users in Internet Explorer 9 on Windows 7 when UAC is enabled (i.E. http://www.java.com/de/download/installed.jsp). When logged on as Administrator or start IE9 as Administrator java applets do run.
If I diable UAC an log on as normal user then applets do run. Applets then still run if UAC is re-enabled again. It seems that UAC needs to be disabled for the Java Plug-In to register something in user context (assumption). If this registration happended Java applets do run also for standard Windows 7 users if UAC is enabled.
Since we're planning a corporate Windows 7 rollout (>800PCs) we cannot do this manually on every computer. Ther must be any solution for this problem.
Does anybody have the same problem and has already found a solution?
This is the content of the error log file generated when a standard domain user tries to run http://www.java.com/de/download/installed.jsp
+#+
+# A fatal error has been detected by the Java Runtime Environment:+
+#+
+# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x776677b2, pid=1320, tid=2380+
+#+
+# JRE version: 6.0_26-b03+
+# Java VM: Java HotSpot(TM) Client VM (20.1-b02 mixed mode, sharing windows-x86 )+
+# Problematic frame:+
+# C [ntdll.dll+0x477b2]+
+#+
+# If you would like to submit a bug report, please visit:+
+# http://java.sun.com/webapps/bugreport/crash.jsp+
+# The crash happened outside the Java Virtual Machine in native code.+
+# See problematic frame for where to report the bug.+
+#+
--------------- T H R E A D ---------------
+Current thread (0x01da8c00): JavaThread "main" [_thread_in_native, id=2380, stack(0x02420000,0x02620000)]+
siginfo: ExceptionCode=0xc0000005, writing address 0x00000024
Registers:
EAX=0x00000024, EBX=0x33827b58, ECX=0x7c38b4e8, EDX=0x7efeff3d
ESP=0x02616090, EBP=0x026160a4, ESI=0x00000024, EDI=0x00000020
EIP=0x776677b2, EFLAGS=0x00250212
Top of Stack: (sp=0x02616090)
+0x02616090: 02616236 00000000 7c34214f 01da6bc8+
+0x026160a0: 026160e4 026160ec 7c34f639 00000020+
+0x026160b0: 7c36b73f 00000000 6d1db83c 02616236+
+0x026160c0: 00000000 33827b58 7c38b548 026160b8+
+0x026160d0: 0000000d 026160bc 02615b4c 026165e0+
+0x026160e0: 7c34240d 7c382198 ffffffff 02616454+
+0x026160f0: 6d1d3b45 6d1db83c 00000000 02616210+
+0x02616100: 6d1db84c 01da8c00 33827b58 00000000+
Instructions: (pc=0x776677b2)
+0x77667792: 33 c0 5e 5d c2 04 00 90 90 90 90 90 90 90 8b ff+
+0x776677a2: 55 8b ec 83 ec 0c 56 57 8b 7d 08 8d 77 04 8b c6+
+0x776677b2: f0 0f ba 30 00 0f 83 eb e2 00 00 64 a1 18 00 00+
+0x776677c2: 00 8b 48 24 89 4f 0c c7 47 08 01 00 00 00 5f 33+
Register to memory mapping:
EAX=0x00000024 is an unknown value
EBX=0x33827b58 is an oop
+{method}+
+- klass: {other class}+
ECX=0x7c38b4e8 is an unknown value
EDX=0x7efeff3d is an unknown value
ESP=0x02616090 is pointing into the stack for thread: 0x01da8c00
EBP=0x026160a4 is pointing into the stack for thread: 0x01da8c00
ESI=0x00000024 is an unknown value
EDI=0x00000020 is an unknown value
Stack: [0x02420000,0x02620000], sp=0x02616090, free space=2008k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
+C [ntdll.dll+0x477b2] RtlEnterCriticalSection+0x12+
+C [MSVCR71.dll+0xf639] _crtGetLocaleInfoW+0x2b1+
+C [deploy.dll+0x3b45] Java_com_sun_deploy_config_WinConfig_installShortcut+0x235+
j com.sun.deploy.config.Config.versionUpdateCheck()V392+
j com.sun.deploy.config.Config.initialize()Z256+
j com.sun.deploy.config.Config.<clinit>()V1933+
v ~StubRoutines::call_stub
+V [jvm.dll+0xfae4b]+
+V [jvm.dll+0x18c531]+
+V [jvm.dll+0xfaecd]+
+V [jvm.dll+0x7deb7]+
+V [jvm.dll+0x7ed1e]+
+V [jvm.dll+0x7f009]+
+V [jvm.dll+0x7f126]+
+V [jvm.dll+0x4d719]+
+V [jvm.dll+0x4de7f]+
+V [jvm.dll+0x4e050]+
+V [jvm.dll+0x4ac51]+
j sun.plugin2.main.server.JVMManager.processJREInfo()V32+
j sun.plugin2.main.server.JVMManager.<init>()V86+
j sun.plugin2.main.server.JVMManager.<clinit>()V72+
v ~StubRoutines::call_stub
+V [jvm.dll+0xfae4b]+
+V [jvm.dll+0x18c531]+
+V [jvm.dll+0xfaecd]+
+V [jvm.dll+0x7deb7]+
+V [jvm.dll+0x7ed1e]+
+V [jvm.dll+0x7f009]+
+V [jvm.dll+0x7f126]+
+V [jvm.dll+0x4d719]+
+V [jvm.dll+0x4de7f]+
+V [jvm.dll+0x4e050]+
+V [jvm.dll+0x4ac51]+
j sun.plugin2.main.server.IExplorerPlugin.<clinit>()V41+
v ~StubRoutines::call_stub
+V [jvm.dll+0xfae4b]+
+V [jvm.dll+0x18c531]+
+V [jvm.dll+0xfaecd]+
+V [jvm.dll+0x7deb7]+
+V [jvm.dll+0x7ed1e]+
+V [jvm.dll+0x7f009]+
+V [jvm.dll+0x7f126]+
+V [jvm.dll+0xb2ae9]+
+V [jvm.dll+0x94be8]+
+C [jp2iexp.dll+0x25b6] Java_sun_plugin2_main_server_WindowsHelper_uninstallHook+0xeaa+
+C [jp2iexp.dll+0x3b6b] Java_sun_plugin2_main_server_IExplorerPlugin_fillInExceptionInfo0+0x7ee+
+C [jp2iexp.dll+0xd2a4] DllGetClassObject+0x57c6+
+C [MSHTML.dll+0x156e41] RunHTMLApplication+0x1a9a+
+C [MSHTML.dll+0x156c95] RunHTMLApplication+0x18ee+
+C [MSHTML.dll+0x156cc3] RunHTMLApplication+0x191c+
+C [MSHTML.dll+0x156948] RunHTMLApplication+0x15a1+
+C [MSHTML.dll+0x15675f] RunHTMLApplication+0x13b8+
+C [MSHTML.dll+0x1563bf] RunHTMLApplication+0x1018+
+C [MSHTML.dll+0x15602e] RunHTMLApplication+0xc87+
+C [MSHTML.dll+0x99a35] MatchExactGetIDsOfNames+0x5eed7+
+C [MSHTML.dll+0x262624] CTravelLog_CreateInstance+0x1edcf+
+C [MSHTML.dll+0x29dc6f] DllGetClassObject+0x23eb1+
+C [MSHTML.dll+0x267e1c] CTravelLog_CreateInstance+0x245c7+
+C [MSHTML.dll+0x267d48] CTravelLog_CreateInstance+0x244f3+
+C [MSHTML.dll+0x267cad] CTravelLog_CreateInstance+0x24458+
+C [MSHTML.dll+0x267c0d] CTravelLog_CreateInstance+0x243b8+
+C [MSHTML.dll+0x24b83d] CTravelLog_CreateInstance+0x7fe8+
+C [MSHTML.dll+0x3ea169] DllGetClassObject+0x1703ab+
+C [MSHTML.dll+0x4095e0] DllGetClassObject+0x18f822+
+C [USER32.dll+0x1c4e7] gapfnScSendMessage+0x1cf+
+C [USER32.dll+0x1c5e7] gapfnScSendMessage+0x2cf+
+C [USER32.dll+0x1cc19] gapfnScSendMessage+0x901+
+C [USER32.dll+0x1cc70] DispatchMessageW+0xf+
+C [IEFRAME.dll+0xf1b83] Ordinal234+0x6520+
+C [IEFRAME.dll+0x111ac6] Ordinal224+0x17ff9+
+C [iertutil.dll+0x140150] Ordinal59+0x8b+
+C [IEFRAME.dll+0xffe03] Ordinal224+0x6336+
+C [kernel32.dll+0x53c45] BaseThreadInitThunk+0x12+
+C [ntdll.dll+0x637f5] RtlInitializeExceptionChain+0xef+
+C [ntdll.dll+0x637c8] RtlInitializeExceptionChain+0xc2+
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.sun.deploy.config.WinConfig.getBrowserPath()Ljava/lang/String;0+
j com.sun.deploy.config.Config.versionUpdateCheck()V392+
j com.sun.deploy.config.Config.initialize()Z256+
j com.sun.deploy.config.Config.<clinit>()V1933+
v ~StubRoutines::call_stub
j sun.plugin2.main.server.JVMManager.processJREInfo()V32+
j sun.plugin2.main.server.JVMManager.<init>()V86+
j sun.plugin2.main.server.JVMManager.<clinit>()V72+
v ~StubRoutines::call_stub
j sun.plugin2.main.server.IExplorerPlugin.<clinit>()V41+
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
+0x03226400 JavaThread "traceMsgQueueThread" daemon [_thread_blocked, id=1796, stack(0x0a8c0000,0x0a9c0000)]+
+0x031e2c00 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2144, stack(0x0a7b0000,0x0a8b0000)]+
+0x031d3800 JavaThread "C1 CompilerThread0" daemon [_thread_blocked, id=2036, stack(0x050d0000,0x051d0000)]+
+0x031d2800 JavaThread "Attach Listener" daemon [_thread_blocked, id=1268, stack(0x0a5b0000,0x0a6b0000)]+
+0x031d0800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1120, stack(0x0a4b0000,0x0a5b0000)]+
+0x031ca000 JavaThread "Finalizer" daemon [_thread_blocked, id=1140, stack(0x09fc0000,0x0a0c0000)]+
+0x031c8c00 JavaThread "Reference Handler" daemon [_thread_blocked, id=2500, stack(0x0a380000,0x0a480000)]+
+=>0x01da8c00 JavaThread "main" [_thread_in_native, id=2380, stack(0x02420000,0x02620000)]+
Other Threads:
+0x0318c800 VMThread [stack: 0x0a1c0000,0x0a2c0000] [id=2672]+
+0x031f2000 WatcherThread [stack: 0x0a9c0000,0x0aac0000] [id=2712]+
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation   total 4928K, used 281K [0x317e0000, 0x31d30000, 0x32280000)
eden space 4416K,   6% used [0x317e0000, 0x31826480, 0x31c30000)
from space 512K,   0% used [0x31c30000, 0x31c30000, 0x31cb0000)
to   space 512K,   0% used [0x31cb0000, 0x31cb0000, 0x31d30000)
tenured generation   total 10944K, used 0K [0x32280000, 0x32d30000, 0x337e0000)
the space 10944K,   0% used [0x32280000, 0x32280000, 0x32280200, 0x32d30000)
compacting perm gen total 12288K, used 371K [0x337e0000, 0x343e0000, 0x377e0000)
the space 12288K,   3% used [0x337e0000, 0x3383cc08, 0x3383ce00, 0x343e0000)
ro space 10240K, 51% used [0x377e0000, 0x37d0dff8, 0x37d0e000, 0x381e0000)
rw space 12288K, 55% used [0x381e0000, 0x3887c208, 0x3887c400, 0x38de0000)
Code Cache [0x0c910000, 0x0c980000, 0x0e910000)
total_blobs=147 nmethods=5 adapters=79 free_code_cache=33098880 largest_free_block=0
Dynamic libraries:
+0x00a40000 - 0x00af8000      C:\Program Files\Internet Explorer\iexplore.exe+
+0x77620000 - 0x7775c000      C:\Windows\SYSTEM32\ntdll.dll+
+0x75f50000 - 0x76024000      C:\Windows\system32\kernel32.dll+
+0x75a70000 - 0x75aba000      C:\Windows\system32\KERNELBASE.dll+
+0x777a0000 - 0x77840000      C:\Windows\system32\ADVAPI32.dll+
+0x75d60000 - 0x75e0c000      C:\Windows\system32\msvcrt.dll+
+0x75ac0000 - 0x75ad9000      C:\Windows\SYSTEM32\sechost.dll+
+0x764a0000 - 0x76541000      C:\Windows\system32\RPCRT4.dll+
+0x77250000 - 0x77319000      C:\Windows\system32\USER32.dll+
+0x76450000 - 0x7649e000      C:\Windows\system32\GDI32.dll+
+0x77840000 - 0x7784a000      C:\Windows\system32\LPK.dll+
+0x76550000 - 0x765ed000      C:\Windows\system32\USP10.dll+
+0x75ee0000 - 0x75f37000      C:\Windows\system32\SHLWAPI.dll+
+0x765f0000 - 0x7723a000      C:\Windows\system32\SHELL32.dll+
+0x774c0000 - 0x7761c000      C:\Windows\system32\ole32.dll+
+0x75c20000 - 0x75d30000      C:\Windows\system32\urlmon.dll+
+0x76080000 - 0x7610f000      C:\Windows\system32\OLEAUT32.dll+
+0x76110000 - 0x762c6000      C:\Windows\system32\iertutil.dll+
+0x762d0000 - 0x763ea000      C:\Windows\system32\WININET.dll+
+0x75f40000 - 0x75f43000      C:\Windows\system32\Normaliz.dll+
+0x75d40000 - 0x75d5f000      C:\Windows\system32\IMM32.DLL+
+0x75e10000 - 0x75edc000      C:\Windows\system32\MSCTF.dll+
+0x66850000 - 0x67195000      C:\Windows\system32\IEFRAME.dll+
+0x77240000 - 0x77245000      C:\Windows\system32\PSAPI.DLL+
+0x73850000 - 0x7388c000      C:\Windows\system32\OLEACC.dll+
+0x743d0000 - 0x7456e000      C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\comctl32.dll+
+0x75b70000 - 0x75beb000      C:\Windows\system32\comdlg32.dll+
+0x73600000 - 0x73631000      C:\Program Files\Internet Explorer\IEShims.dll+
+0x75740000 - 0x7574c000      C:\Windows\system32\CRYPTBASE.dll+
+0x75590000 - 0x75598000      C:\Windows\system32\Secur32.dll+
+0x756d0000 - 0x756eb000      C:\Windows\system32\SSPICLI.DLL+
+0x757c0000 - 0x757cb000      C:\Windows\system32\profapi.dll+
+0x77760000 - 0x77795000      C:\Windows\system32\WS2_32.dll+
+0x75d30000 - 0x75d36000      C:\Windows\system32\NSI.dll+
+0x750a0000 - 0x750e4000      C:\Windows\system32\dnsapi.DLL+
+0x72fa0000 - 0x72fbc000      C:\Windows\system32\iphlpapi.DLL+
+0x72f90000 - 0x72f97000      C:\Windows\system32\WINNSI.DLL+
+0x757b0000 - 0x757be000      C:\Windows\system32\RpcRtRemote.dll+
+0x63ef0000 - 0x64aa8000      C:\Windows\system32\MSHTML.dll+
+0x74cb0000 - 0x74cb9000      C:\Windows\system32\VERSION.dll+
+0x6f5f0000 - 0x6f6aa000      C:\Windows\system32\d2d1.dll+
+0x6c8a0000 - 0x6c9aa000      C:\Windows\system32\DWrite.dll+
+0x6d3c0000 - 0x6d443000      C:\Windows\system32\dxgi.dll+
+0x739d0000 - 0x739e3000      C:\Windows\system32\dwmapi.dll+
+0x75300000 - 0x75316000      C:\Windows\system32\CRYPTSP.dll+
+0x758d0000 - 0x758fd000      C:\Windows\system32\WINTRUST.dll+
+0x75950000 - 0x75a6d000      C:\Windows\system32\CRYPT32.dll+
+0x75830000 - 0x7583c000      C:\Windows\system32\MSASN1.dll+
+0x74b70000 - 0x74b91000      C:\Windows\system32\ntmarta.dll+
+0x76030000 - 0x76075000      C:\Windows\system32\WLDAP32.dll+
+0x75000000 - 0x7503b000      C:\Windows\system32\rsaenh.dll+
+0x75ae0000 - 0x75b63000      C:\Windows\system32\CLBCatQ.DLL+
+0x69240000 - 0x69272000      C:\Program Files\Internet Explorer\ieproxy.dll+
+0x756f0000 - 0x7573c000      C:\Windows\system32\apphelp.dll+
+0x74130000 - 0x74263000      C:\Windows\System32\msxml3.dll+
+0x75750000 - 0x757af000      C:\Windows\system32\SXS.DLL+
+0x73d90000 - 0x73d9b000      C:\Windows\system32\msimtf.dll+
+0x6d390000 - 0x6d3bb000      C:\Windows\system32\msls31.dll+
+0x77320000 - 0x774bd000      C:\Windows\system32\setupapi.dll+
+0x75920000 - 0x75947000      C:\Windows\system32\CFGMGR32.dll+
+0x75900000 - 0x75912000      C:\Windows\system32\DEVOBJ.dll+
+0x73570000 - 0x7359c000      C:\Windows\system32\d3d10_1.dll+
+0x734b0000 - 0x734ea000      C:\Windows\system32\d3d10_1core.dll+
+0x6c770000 - 0x6c89c000      C:\Windows\system32\D3D10Warp.dll+
+0x69760000 - 0x6978e000      C:\Windows\system32\MLANG.dll+
+0x74970000 - 0x74a65000      C:\Windows\system32\PROPSYS.dll+
+0x6ab00000 - 0x6ac02000      C:\Windows\system32\d3d10.dll+
+0x73520000 - 0x73553000      C:\Windows\system32\d3d10core.dll+
+0x73d40000 - 0x73d80000      C:\Windows\system32\UxTheme.dll+
+0x73180000 - 0x731d2000      C:\Windows\system32\RASAPI32.dll+
+0x73160000 - 0x73175000      C:\Windows\system32\rasman.dll+
+0x73150000 - 0x7315d000      C:\Windows\system32\rtutils.dll+
+0x6f6b0000 - 0x6f6b6000      C:\Windows\system32\sensapi.dll+
+0x75190000 - 0x751cc000      C:\Windows\system32\mswsock.dll+
+0x74d40000 - 0x74d45000      C:\Windows\System32\wshtcpip.dll+
+0x747f0000 - 0x74815000      C:\Windows\system32\peerdist.dll+
+0x74e00000 - 0x74e17000      C:\Windows\system32\USERENV.dll+
+0x753f0000 - 0x7540b000      C:\Windows\system32\AUTHZ.dll+
+0x747e0000 - 0x747f0000      C:\Windows\system32\NLAapi.dll+
+0x72330000 - 0x72336000      C:\Windows\system32\rasadhlp.dll+
+0x75180000 - 0x75186000      C:\Windows\System32\wship6.dll+
+0x72b90000 - 0x72bc8000      C:\Windows\System32\fwpuclnt.dll+
+0x695a0000 - 0x6975b000      C:\Windows\System32\jscript9.dll+
+0x72de0000 - 0x72e1a000      C:\Windows\System32\Dxtrans.dll+
+0x74790000 - 0x747a4000      C:\Windows\System32\ATL.DLL+
+0x74330000 - 0x7433a000      C:\Windows\system32\ddrawex.dll+
+0x694b0000 - 0x69597000      C:\Windows\system32\DDRAW.dll+
+0x742d0000 - 0x742d6000      C:\Windows\system32\DCIMAN32.dll+
+0x6c710000 - 0x6c769000      C:\Windows\System32\Dxtmsft.dll+
+0x73a00000 - 0x73afb000      C:\Windows\system32\windowscodecs.dll+
+0x6cf70000 - 0x6cfa2000      C:\Windows\system32\WINMM.dll+
+0x739a0000 - 0x739cf000      C:\Windows\system32\XmlLite.dll+
+0x74310000 - 0x74317000      C:\Windows\system32\msiltcfg.dll+
+0x6c410000 - 0x6c650000      C:\Windows\system32\msi.dll+
+0x6ac70000 - 0x6acb7000      C:\Windows\system32\Adobe\Director\SwDir.dll+
+0x6c6d0000 - 0x6c703000      C:\Windows\system32\windowscodecsext.dll+
+0x69790000 - 0x69809000      C:\Windows\system32\mscms.dll+
+0x6ac30000 - 0x6ac68000      C:\Windows\system32\icm32.dll+
+0x69410000 - 0x694ad000      C:\Windows\system32\Adobe\Shockwave 11\Control.dll+
+0x6e810000 - 0x6e861000      C:\Windows\system32\winspool.drv+
+0x69390000 - 0x69402000      C:\Windows\system32\DSOUND.dll+
+0x74ac0000 - 0x74ae5000      C:\Windows\system32\POWRPROF.dll+
+0x74a70000 - 0x74aa9000      C:\Windows\System32\MMDevApi.dll+
+0x73960000 - 0x73996000      C:\Windows\system32\AUDIOSES.DLL+
+0x736e0000 - 0x736ec000      C:\Windows\system32\mssprxy.dll+
+0x69320000 - 0x6938a000      C:\Windows\system32\vbscript.dll+
+0x653b0000 - 0x659de000      C:\Windows\system32\Macromed\Flash\Flash10t.ocx+
+0x74f70000 - 0x74f78000      C:\Windows\system32\credssp.dll+
+0x74f20000 - 0x74f5a000      C:\Windows\system32\schannel.DLL+
+0x67430000 - 0x674f8000      C:\Windows\system32\OPENGL32.DLL+
+0x68ce0000 - 0x68d02000      C:\Windows\system32\GLU32.dll+
+0x10000000 - 0x10dc0000      C:\Windows\system32\ig4icd32.dll+
+0x68c70000 - 0x68cd4000      C:\Windows\system32\D3DIM.DLL+
+0x67360000 - 0x6742c000      C:\Windows\system32\D3DIM700.DLL+
+0x01d40000 - 0x01d5f000      C:\Program Files\Java\jre6\bin\jp2iexp.dll+
+0x7c340000 - 0x7c396000      C:\Program Files\Java\jre6\bin\MSVCR71.dll+
+0x72d30000 - 0x72d37000      C:\Windows\system32\wsock32.dll+
+0x71b10000 - 0x71b20000      C:\Windows\system32\napinsp.dll+
+0x71af0000 - 0x71b02000      C:\Windows\system32\pnrpnsp.dll+
+0x720d0000 - 0x720d8000      C:\Windows\System32\winrnr.dll+
+0x71ae0000 - 0x71aed000      C:\Windows\system32\wshbth.dll+
+0x6f8f0000 - 0x6f974000      C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.17514_none_ec83dffa859149af\comctl32.dll+
+0x6d7f0000 - 0x6da9f000      C:\PROGRA~1\Java\jre6\bin\client\jvm.dll+
+0x6d7a0000 - 0x6d7ac000      C:\PROGRA~1\Java\jre6\bin\verify.dll+
+0x6d320000 - 0x6d33f000      C:\PROGRA~1\Java\jre6\bin\java.dll+
+0x6d7e0000 - 0x6d7ef000      C:\PROGRA~1\Java\jre6\bin\zip.dll+
+0x01dc0000 - 0x01dc6000      C:\Program Files\Java\jre6\bin\jp2native.dll+
+0x6d1d0000 - 0x6d1e3000      C:\Program Files\Java\jre6\bin\deploy.dll+
VM Arguments:
jvm_args: -Xbootclasspath/a:C:\PROGRA~1\Java\jre6\lib\deploy.jar;C:\PROGRA~1\Java\jre6\lib\javaws.jar;C:\PROGRA~1\Java\jre6\lib\plugin.jar -Xmx32m -Djava.awt.headless=true -Dkernel.background.download=false -Dkernel.download.dialog=false -XX:MaxDirectMemorySize=64m
java_command: <unknown>
Launcher Type: generic
Environment Variables:
PATH=C:\Program Files\Internet Explorer;;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\system32\Empirum
USERNAME=%username%
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 42 Stepping 7, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows 7 Build 7601 Service Pack 1
CPU:total 4 (2 cores per cpu, 2 threads per core) family 6 model 42 stepping 7, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, popcnt, ht
Memory: 4k page, physical 3063864k(2285416k free), swap 6125972k(5328168k free)
vm_info: Java HotSpot(TM) Client VM (20.1-b02) for windows-x86 JRE (1.6.0_26-b03), built on May 4 2011 00:50:59 by "java_re" with MS VC+ 7.1 (VS2003)+
time: Thu Jun 30 17:20:35 2011
elapsed time: 0 seconds

user11262844 wrote:
Since we're planning a corporate Windows 7 rollout (>800PCs) we cannot do this manually on every computer. Ther must be any solution for this problem.If you're doing a corporate rollout of that size then surely you're just making an image of the desired configuration and just duplicating it onto the 800 PCs? In which case you would just configure IE appropriately as part of the image.
Or alternatively you are manually configuring each of the 800 PCs, in which case this would be just one more thing in the checklist.

Similar Messages

How to tell embedded jinitator applet is still running when window closed

Hello, we are trying to accomplish the same thing that is mentioned in this post from Metalink. I've searched for a solution and hope someone here can help. Instead of restating the issue I think David Wilson does a good job of explaining what is needed. Can anyone please suggest a possible solution?
From: David Wilton 07-Oct-05 01:08
Subject: How to tell embedded jinitator applet is still running when window closed
How to tell embedded jinitator applet is still running when window closed
Hi,
We run an oracle 10g forms application through 9iAS over an intranet. All users are running windows 2000 professional.
We run separate frame = true but I would like to switch to separate frame = false
With separate frame = true if the user clicks the outer windows "X" close button (forms mdi window) the user is prompted to save changes before the application ends.
BUT
when using separate frame = false
If the user clicks the upper window "X" button (no longer form mdi window but regular browser window) the window and application is abruptly closed.
I'm interested in using a onbeforeunload function to confirm if the user wants to close the window. This would be placed in the basejini.htm file. This could always ask if the user wants to exit or not. If they click OK then the window closes but if they click "Cancel" you are returned to the forms application exactly where you left. something like event.returnvalue="do you really want to exit?";
However if the user exited using the normal exit form method then the applet is already closed before the onbeforeunoad event fires and there is nothing to go back to and I want the window to close automatically. This is accomplished using close.html file in post forms trigger.
So what I want and what I think many may also want is the check if the embedded applet is still running and if so prompt the user to return to the application or continue to close. Of course If the applet is no longer running then just close because there is no reason confirm closing anymore.
Does anyone have a html/JavaScript solution that can be placed in the jinitiator.htm file? or similar?
Thank you
David
[email protected]
From: Andrew Lenton 07-Oct-05 08:58
Subject: Re : How to tell embedded jinitator applet is still running when window closed
I don't know if this is exactly what you are after but you can add the following to the top of your basejini.htm file and it should prompt the user before exiting the IE window.
<BODY %HTMLbodyAttrs%>
%HTMLbeforeForm%
<SCRIPT>

</SCRIPT>
From: Oracle, mohammed pasha 07-Oct-05 09:55
Subject: Re : How to tell embedded jinitator applet is still running when window closed
David,
Well I could not understand your complete requirement.
Refer to Note.201481.1 How to Close the Browser Window When Closing Forms And How to Simulate SeparateFrame By Javascript
Note.115905.1 How to Close Browser Window When Closing Webforms Applet
Kind Regards,
Anwar
From: David Wilton 07-Oct-05 14:37
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Thank you for your reply and yes you did not understand my question fully.
Sorry if this is a long reply
I am able to close the browser window using information in notes 115905.1 and 201481.1, this is not the issue. We implemented this several years ago. It is workable for both separate frame = true or false.
It is most important to not allow the user to end their forms application by closing the windows browser, they must close using normal form exit commands.
What I want is to have separate frame = false, the big drawback to this option is the user can exit the application and bypass all forms code by pressing the windows "X" close button. This is why we need the code as just provided by Andrew Lenton above in this thread.
BUT Andrew's code will always prompt the user before closing the window and I do not want that. I want the user to be prompted only under scenario 2 listed below.
Here's the 2 case scenario for exiting the application.
1. If the user closes properly and uses exit form which fires all normal form triggers including post_form with it's call to close.html file.
All uncommitted changes are saved or rollback and the users session is ended normally both on the database and in the application server.
All browser windows will close, great all is good. And without Andrew's code the window will close but with Andrew's code the user will be prompted to close or not, if they select Cancel the window will remain but the applet has already ended so why prompt? ...This is what I want to avoid.
2. In the forms app. if the user clicks the windows "X" close button with uncommitted changes. The browser just closes the changes are rollback without prompting the user to save. The users sessions are now lost and still running in the database and application server until they are timed out.
If I use Andrew's code then the user will be prompted to continue to close or go back, if they click Cancel to go back then focus returns to the forms application and the user can continue to work. If the user clicks OK then the window closes and unfortunately their sessions are still lost until timed out.
So what I desire is to add to Andrew's code to check if the embedded applet is still running and prompt the user to close or not accordingly.
Something like:
Basejini.htm like
</HEAD>
<SCRIPT LANGUAGE="JavaScript">
function maximizeWindow()
window.moveTo(0,0);
window.resizeTo(screen.availWidth,screen.availHeight);
function confirm(){
If(document.embeddedapplet.closed())
Win.opener = self;
win.close();
Else if
event.returnValue = "Closing Forms Application. OK to continue?";
</SCRIPT>
<BODY %HTMLbodyAttrs%, onload="maximizeWindow()", onbeforeunload="confirm()">
%HTMLbeforeForm%
I hope this explains my requirements.
David
From: Oracle, Evelene Raechel 10-Oct-05 06:45
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Hi,
Note.199928.1 How to Alert User on Closing Client's Browser Window in Webforms
Regards,
Rachel
From: David Wilton 11-Oct-05 17:40
Subject: Re : How to tell embedded jinitator applet is still running when window closed
I'm sorry this is not helpful at all.
Note 199928.1 is only an alert which does not stop the closing of the window and still displays as an alert if the user does close properly using exit form ... so why would you want to display the alert then?
This is exaclty what I do not want and why I want to determine if the applet is still running before displaying any kind of message.
David
From: Oracle, Evelene Raechel 17-Oct-05 12:23
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Closing thread.
Thanks,

Hello,
I had the same issue last year - wanting to provide a warning on closing the browser, but only if the Forms session is still running. The approach I took is described below, see also the thread where I originally posted this at Closing brower window
Hi there,I've had a similar requirement - or rather, the two conflicting requirements: to warn when the browser is being closed, but for the app to be able to close the browser without a warning being fired.
To always provide a warning when someone (the user or the Forms app) tries to go to a different page (e.g. your close.htm), use Javascript like:
function confirmExit(){
if(appletRunning==true) {
msg="Closing this window or navigating to another page will end your SomeGreatApp session.";
window.event.returnValue=msg;
And make a call to confirmExit() in the onBeforeUnload event of your main page.
You'll notice I first check an 'appletRunning' variable before displaying the warning. This Javascript variable is set to true by my app when it starts up, using an embedded Javabean that calls out to Javascript. Once that variable is set to true, then the warning will be displayed if the user tries to shut the browser by clicking on the 'x' button, or to go to a different URL.
When my app is shutting down, it uses the same Javabean to set appletRunning back to false. It then navigates to a close.htm - which will be done without a warning being displayed.
See Re: How can a Javabean call Javascript function of the basejpi.html?? for example code on how to call Javascript from a bean embedded in your Forms app.
Hope these ideas help you out, it's worked for me (so far, anyway!!)
James

File Uploader Java Applet cannot be run

I have a website that I need to upload PDFs to, but since ugrading to Lion, I cannot do it any more. I have downloaded the separte Java app, but it still does not work.
This is the error message I get:
File Uploader Java Applet cannot be run. Make sure that Java is installed on your PC and Java applets are permitted in browser settings. Use this link to download and install appropriate version of Java:

Thank you etresoft - that did not solve the problem. However, I did fix it by changing something in Java Preferences (which is located in the Utilities Folder).
I first deleted the cache files as you suggested in the Network tab. Then I quit and restarted Firefox. I still got the same error message when I tried to upload.
Then, I went back into Java Preferences and checked the box, "Enable Appplet Plug-in and Webstart Applications" located in the General Tab. I then quit and restarted Firefox. Now I am able to upload documents as I could before Lion.
Thank you!!

Applet does not run in Browser

Iam using Windows XP and IE 6.0. Applets do not run in my browser. Hovering the cursor where the applet should be in the browser, I get a Class not found message. Setting the CLASSPATH variable did not help. Any suggestions?

You might find an answer in this new page
[url http://java.sun.com/j2se/1.4.2/docs/guide/deployment/deployment-guide/upgrade-guide/index.html]Java Upgrade Guide: Migrating From the Microsoft JVM to the Sun JRE

My firefox is not running- when i try to open it their appears.. "The exception unknown software exception (0xc0000417) occurred in the application at location

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/942433]]</blockquote>
my firefox is not running… when i try to open it their appears.. “The exception unknown software exception (0xc0000417) occurred in the application at location 0x78b2ae6e” ..what can i do..????
REPLY

If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
If you can't open Firefox then see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
Try a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*C:\Program Files\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

In my iphone 4, wifi is connected but internet is not running. when i usd safari and other internet application it alwasys says wifi is not connected. why ? what happen to my iphone?

in my iphone 4, wifi is connected but internet is not running. when i usd safari and other internet application it alwasys says wifi is not connected. why ? what happen to my iphone?

Try Settings > General > Reset > Reset network connections.
Other basic troubleshooting from the User's Guide is reset, restart, and restore.

RT does not run when deployed to 9642 sbRIO LV 2011

I have code deployed to a Ni sbRIO9642 where the RT code does not run when deployed to the when using LabVIEW 2011. It appears the NI-RT.ini file on the target is not being properly configured. I manually configured the ini file using FTP and the RT still will not run. I built a small test application and the RT on that did not run either, although i had hard validatiuon that the FPGA code was indeed running. Thanks - Keith

Hey Martin,
I don't know if this specific problem was resolved, but there was a known issue in LabVIEW Real-Time 2011 (sp1) that exhibited this behavior.
Shared Variables
292012
Return
Real-Time Applications containing typedef Shared Variables fail to run.
If you are building an RTEXE that contains Shared Variables whose data type is based upon a type definition and the build specification is configured to disconnect type definitions the RTEXE will not run.
Workaround: 1.) Manually disconnect the variable from the typedef before building the application 2.) Change the build spec so it doesn't disconnect type definitions
Reported Version: 2011 32-bit
Resolved Version: 2012
Added: 10/11/2011
Although this has been fixed in 2012, and shouldn't be an issue for you developing in LabVIEW 2012. Have you tried implementing a heartbeat VI? to verify if your RT app is actually running and not communicating? (great example here)
Do you have the system state pushier installed on your cRIO? does it point to a memory leak or 100% CPU utilization? (steps to install it found here, if you're not familiar)
Are you using the cRIO in Scan Interface mode? or in the FPGA interface?
Applications Engineer
National Instruments
CLD Certified

Some Java applets do not work after silent installation, solved by toggling "Enable Java content in the browser" - Why?

We have about 1,800 workstations running Windows 7 (both 32-bit and 64-bit) running various versions of the Java JRE from 6 update 32 through 7 update 51. Most are on 6 update 45. We would like to standardize on Java 7 update 51 (32-bit) and get everyone updated to that version for security reasons.
For the past two weeks, we have been having trouble with our installation pre-pilot. What we are seeing is that our procedure successfully closes any open Internet Explorer windows and Java-related processes, uninstalls all old versions of the Java JRE, and then claims to have successfully installed Java 7 update 51. The Java Control panel works. We can even take Internet Explorer to Verify Java Version or Java Tester - What Version of Java Are You Running? and confirm that the Java applets on those sites are loading (though the latter only works after adding the site to the exceptions site list); however, when testers try to access our Kronos Workforce Central 6.3.10 system, the Java applets used by that system do not load.
We have tried the following things, none of which worked:
Clear Internet Explorer browser cache and cookies.
Clear the local Java cache.
Reboot the computer.
Reset Internet Explorer settings, including personal settings.
The one thing which does work is going into the Java Control Panel, going to the Security tab, unchecking "Enable Java content in the browser", pressing Apply, pressing OK on the pop-up window, checking the "Enable Java content in the browser" box again, pressing OK, pressing OK on the pop-up window, and then restarting Internet Explorer. It is only after this point that all Java applets, including the ones used by Kronos Workforce Central 6.3.10, work.
What I need to know is how I can automate the procedure of reinitializing the "Enable Java content in the browser" checkbox after installation or am I doing something wrong or missing a step in the automated installation that is causing this to happen?
We are using Microsoft SCCM 2007 R3 to accomplish this upgrade, and everything is being run on the client machine using the SYSTEM account. First, the PowerShell script "javaclean.ps1" is run, with part of the command-line process changing the PowerShell script execution policy to Bypass. This script handles the closing of Java-dependent applications and Java processes and uninstalls old Java versions.
javaclean.ps1:
#Find all Java products excluding the auto updater which actually gets uninstalled when the main install is removed.
write-host "Searching for all installed Java versions" -ForegroundColor Yellow
[array]$javas=Get-WmiObject -query "select * from win32_Product where (Name like 'Java %' or Name like 'Java(TM)%' or Name like 'J2SE%') and Name <> 'Java Auto Updater'"
if ($javas.count -gt 0)
    write-host "Java is already Installed" -ForegroundColor Yellow
    #Get all the Java processes and kill them. If java is running and the processes aren't killed then this script will invoke a sudden reboot.
    [array]$processes=Get-Process -Name "Java*" #-erroraction silentlycontinue
    $processes += Get-Process -Name "iexplore" #-erroraction silentlycontinue
    $processes += Get-Process -Name "firefox" #-erroraction silentlycontinue
    $processes += Get-Process -Name "chrome" #-erroraction silentlycontinue
    $processes += Get-Process -Name "jqs" #-erroraction silentlycontinue
    $processes += Get-Process -Name "jusched" #-erroraction silentlycontinue
    $processes += Get-Process -Name "jp2launcher" #-erroraction silentlycontinue
    if ($processes.Count -gt 0)
        foreach ($myprocess in $processes)
            $myprocess.kill()
    #Loop through the installed Java products.
    foreach($java in $javas){
        write-host "Uninstalling "$java.name -ForegroundColor Yellow
        $java.Uninstall()
After this script is complete, SCCM calls a the VBS script "install.vbs" to perform the actual installation of Java JRE 7 update 51.
install.vbs
'* Script: Install JRE 7 routine
'* Date:   3/14/14
'* Author: [REDACTED]
'* Rev:    1.0
'* Notes:
'/// Common
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objWshShell = CreateObject("WScript.Shell")
' Get system architecture
Dim colSys : Set colSys = GetObject("WinMGMTS://").ExecQuery("SELECT AddressWidth FROM Win32_Processor",, 48)
Dim objSys
For Each objSys In colSys
    If objSys.AddressWidth = 64 Then bolIs64Bit = True
Next
' Get operating system
Dim colOS : Set colOS = GetObject("WinMGMTS://").ExecQuery ("Select * from Win32_OperatingSystem",,48)
Dim objOS
For Each objOS In colOS
    If Left(objOS.caption, 20) = "Microsoft Windows 8 " Then
        bolIsWin8 = True
        WScript.Echo "win8"
    End If
    If Left(objOS.caption, 22) = "Microsoft Windows 8.1 " Then
        bolIsWin81 = True
        WScript.Echo "win81"
    End    If
Next
' Set 32 bit program files directory
If bolIs64Bit = True Then
    strPFILES = "Program Files (x86)"
    strSYSDIR = "SysWOW64"
    Else strPFILES = "Program Files"
    strSYSDIR = "System32"
End If
' Set windows directory
strWIN = objWshShell.ExpandEnvironmentStrings("%windir%")
' Set the current directory
strCurrentDir = objFSO.GetParentFolderName(Wscript.ScriptFullName)
' Set computer name
strCompName = objWshShell.ExpandEnvironmentStrings("%computername%")
'/// Main script
    '/// Install via .msi & capture exit code
    'intExitCode = objWshShell.Run("msiexec.exe /i """ & strCurrentDir & "\package.msi""" & " TRANSFORMS=""" & strCurrentDir & _
    '    "\transform.mst"" ALLUSERS=1 Reboot=ReallySuppress /qn", 8, True)
    'wscript.quit(intExitCode)
    '****RUN COMMANDS HERE****
    ' Create folder structure if it doesn't exist already
    strFullPath = "c:\Windows\Sun\Java\Deployment" '
    ' How many levels are there in the path?
    nLevel = 0
    strParentPath = strFullPath
    Do Until strParentPath = ""
        strParentPath = objFSO.GetParentFolderName(strParentPath)
        nLevel = nLevel + 1
    Loop
    For iLevel = 1 To nLevel
        ' Figure out path for directory at level iLevel
        strParentPath = strFullPath
        For j = 1 To nLevel - iLevel
            strParentPath = objFSO.GetParentFolderName(strParentPath)
          Next
    ' Does this directory exist? If not, create it.
        If objFSO.FolderExists(strParentPath) = False Then
            Set newFolder = objFSO.CreateFolder(strParentPath)
        End If
    Next
    ' Kill running processes
    objWshShell.Run "taskkill /F /IM iexplore.exe", 8, True
    objWshShell.Run "taskkill /F /IM firefox.exe", 8, True
    objWshShell.Run "taskkill /F /IM chrome.exe", 8, True
    objWshShell.Run "taskkill /F /IM javaw.exe", 8, True
    objWshShell.Run "taskkill /F /IM java.exe", 8, True
    objWshShell.Run "taskkill /F /IM jqs.exe", 8, True
    objWshShell.Run "taskkill /F /IM jusched.exe", 8, True
    ' Copy deployment files
    objFSO.CopyFile strCurrentDir & "\deployment.config", "c:\Windows\Sun\Java\Deployment\", True
    objFSO.CopyFile strCurrentDir & "\deployment.properties", "c:\Windows\Sun\Java\Deployment\", True
    ' Disable UAC
'    If bolIsWin8 Or bolIsWin81 = True Then
'        objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v PromptOnSecureDesktop /t REG_DWORD /d 0 /f", 8, True
'        objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 0 /f", 8, True
'        objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v ConsentPromptBehaviorAdmin /t REG_DWORD /d 0 /f", 8, True
'    End If
    ' Install application
    intExitCode = objWshShell.Run("msiexec.exe /i """ & strCurrentDir & "\jre1.7.0_51.msi"" IEXPLORER=1 AUTOUPDATECHECK=0 JAVAUPDATE=0 JU=0 WEB_JAVA=1 ALLUSERS=1 Reboot=ReallySuppress /qn", 8, True)
    ' Enable UAC
'    If bolIsWin8 Or bolIsWin81 = True Then
'        objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v PromptOnSecureDesktop /t REG_DWORD /d 1 /f", 8, True
'        objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 1 /f", 8, True
'        objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v ConsentPromptBehaviorAdmin /t REG_DWORD /d 5 /f", 8, True
'    End If
    wscript.quit(intExitCode)
    '/// Install via .exe on network
    'objWshShell.Run """" & strCurrentDir & "\Setup.exe"" -s -sms -f1""" & strCurrentDir & _
    '    "\setup.iss"" -f2""" & strWIN & "\Temp\Install-app.txt""", 8, True
    ' Need to turn off the open file security warning first
    Set objEnv = objWshShell.Environment("PROCESS")
    objEnv("SEE_MASK_NOZONECHECKS") = 1
'    intExitCode = objWshShell.Run("""" & strCurrentDir & "\jre-7u45-windows-i586.exe"" /s /v""/norestart " & _
'        "TRANSFORMS=""" & strCurrentDir & "\Tribe-jre7.mst""""", 8, True)
'    WScript.Quit(intExitCode)
    '****RUN COMMANDS HERE****
    ' Then turn it back on
    objEnv.Remove("SEE_MASK_NOZONECHECKS")
'/// Additional functions
Help on this issue would be much appreciated!

It turns out that this is actually a problem with Kronos Workforce Central. We had the "site.java.plugin.CLSID.familyVersion" setting in that application set to "clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA", which is the Java CLSID for Java 6. After updating this value to "clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" (the Java universal CLSID), this problem did not occur upon the automatic upgrade of Java.
We have both Java 6 and Java 7 in our environment, and did during our Kronos implementation, so I don't know why we were using the Java 6 CLSID in the first place.
Case closed!

Forms applet does not load when request forwarded from custom servlet

I have an existing forms app that I wish to call from a newly-developed servlet. The servlet determines which form to call and then forwards the request to the forms servlet using RequestDispatcher.forward().
The request is forwarded correctly but when it is done all I see is a blank browser (IE7) window. When I View Source I see all the correct HTML code (from basejpi.htm) but it seems my browser does not attempt to load the forms applet. No messages are displayed in the Java Console. This is the same HTML that comes back if I run the forms app directly, e.g. click a link that goes straight to the forms servlet URL, only in that case the forms app starts up fine.
Anyone know why this does not work?

Figured out what is going on:
In basejpi.htm there is "<SCRIPT LANGUAGE=JavaScript SRC=java/forms_ie.js>" that creates an OBJECT tag to load the forms applet. I believe since the context of my custom servlet is different than that of the forms servlet, forms_ie.js is not found when the request is forwarded from my servlet.
One question answered raises another. There is also an OBJECT tag inside a NOSCRIPT tag for machines where scripting has been disabled:

<NOSCRIPT>
<OBJECT name=FormsApplet
type="application/x-java-applet"
...>
</NOSCRIPT>
<SCRIPT LANGUAGE="JavaScript" SRC="java/forms_ie.js"></SCRIPT>
My thinking is to remove the NOSCRIPT tag, and also the SCRIPT tag mentioned above, so all machines will simply see the OBJECT tag, like so:

<OBJECT name=FormsApplet
type="application/x-java-applet"
...>
This makes me wonder why the SCRIPT option is there to begin with. Anyone see a downside to this approach?
Kevin

Add Files java applet does not trust our certificate

We have installed Novell Filr and it is working great except for one issue. The java applet that runs when the Add Files button is clicked does not trust our certificate authority. We purchased and installed a SSL certificate, and both IE and Firefox accept it (before installing, we got a certificate warning every time we went to Filr).
The certificate authority is Starfield Secure Certificate Authority, and we use certificates from them for our websites and mail servers, so I do not understand why this applet and/or Java do not.
Is there any way to stop the scary warning message our users get. FYI - this happens the first time the Add Files button is clicked in each session.
Paul Rebmann

Originally Posted by jmarton
na paul wrote:
>
> We have installed Novell Filr and it is working great except for one
> issue. The java applet that runs when the Add Files button is clicked
> does not trust our certificate authority. We purchased and installed
> a SSL certificate, and both IE and Firefox accept it (before
> installing, we got a certificate warning every time we went to Filr).
>
> The certificate authority is Starfield Secure Certificate Authority,
> and we use certificates from them for our websites and mail servers,
> so I do not understand why this applet and/or Java do not.
>
> Is there any way to stop the scary warning message our users get.
> FYI - this happens the first time the Add Files button is clicked in
> each session.
That sounds a little different than what this was designed to fix, but
by any chance have you installed the updated Java applets on the Filr
appliance?
http://download.novell.com/Download?...d=zRrgEN6Kvxo~
Your world is on the move. http://www.novell.com/mobility/
BrainShare 2014 is coming. http://www.novell.com/brainshare/
Hi Paul
Whatever you do it will not work properly especially when some of the users try to use "edit in place". Save yourself the headache and install trusted certificate (primary and intermediate) then even Java will work ok.

Java applets won't run on Safari???

I have reinstalled Java twice, and it still won't run any Java applets. It just sits there with the cup logo and the arrow on either side. It works fine on Firefox but not Safari. Help?

Hello
I'm piggy backing on this thread because I too have had problems with Java and Safari
Java runs fine for me in Firefox, however.
I went to a federal website
https://blrscr3.egs-seg.gc.ca/gol-ged/gov/browserdetection/BrowserCheck.html
that uses java and received this message
" Java applet unable to load
To use this service, you must either install a recent version of the Sun JVM or enable "Scripting of Java applets" if it has been disabled."
so i looked for an update and have downloaded and installed release 6, (at least, it said that it was installed, but have never been able to figure out where)
when I check Java preferences, the choices are J2SE 1.4.2 or J2SE 5, and when I've switched to 1.4.2 I still have no luck.
When i run firefox, i get the java console opening, but it doesn't open with safari, and I can't find the option for this to turn on in safari
i have restarted both safari and my computer and no luck. I have repaired permissions and no changes have taken place.
Any more suggestions?
(thank you, by the way)

Applet can not run without JRE

I have compiled the applet with J2SE 1.4.0. When I tested on the browser IE 5.0 in my computer, it could run because there is JRE included by J2SE 1.4.0 in my computer. When I tested in other computers, it can not run.the display only gray rectangle and there was a statement x.class is not found in bottom bar.The browser IE 5.0 is java enable. But when I access the webpage that include java application in the same computer without JRE, that could run.
what wrong?
thanks

It is likely that the applet you compiled is using bytecode or features that the other machines don't recognize/have. If the other machines have the MS Java virtual machine but don't have the Sun virtual machine, try compiling the applet with the compiler option "-target 1.1" and see if that helps. It may, unless you used Java features that don't exist in Java 1.1 (for instance Swing classes). If so, then the other machines won't be able to run the applet unless they have the Sun jvm installed (like your machine).

Web logic 10.3 - WLDF Console Extension java applet is not loading

Weblogic running in Solaris
Navigating to the weblogic console using – HTTP like , http://host:port/console
I was trying to enable WDLF console extension , as mentioned in documentation copied diagnostics-console-extension.jar to <domain>/console-ext folder. After this a I could see the “WLDF Console Extension” tab when I log into the admin console. But the java applet is failing to load - showing Error: Click for details , follwing are the details
Java Plug-in 10.2.0.13
Using JRE version 1.7.0_02-b13 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\user
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Appreciate your comments

Do you see any further nested exceptions OR errors in the log file.
Considering that the same WLS-JDK combination works on one machine and does not work on another machine, it indicates an environmental issue.
"However installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) on that same server. The web page cannot be displayed....
Have tried installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) in a test server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu."
I am suspecting if it has to do anything with the native libraries being loaded JAVA_LIB_PATH.
Please review the server log file again for identifying differences in LIB_PATH or PATH or any messages saying "Unable to load native.. performance pack.."
Arun

Applet does not run for non-admin users

When logged in as a normal user, our applet fails to run. When logged in as a local admin, the applet runs successfully. The client machine is running Windows XP and IE 8.
The java console contains this error message when it fails:
JNLPAppletLauncher.loadLibrary("jogl")
Exception in thread "AWT-EventQueue-3" java.lang.UnsatisfiedLinkError: jogl
at org.jdesktop.applet.util.JNLPAppletLaunc her.loadLibrary(JNLPAppletLauncher.java: 1922)
at sun.reflect.NativeMethodAccessorImpl.inv oke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.inv oke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl .invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sun.opengl.impl.NativeLibLoader.load LibraryInternal(NativeLibLoader.java:174 )
at com.sun.opengl.impl.NativeLibLoader.acce ss$000(NativeLibLoader.java:49)
at com.sun.opengl.impl.NativeLibLoader$Defa ultAction.loadLibrary(NativeLibLoader.ja va:80)
at com.sun.opengl.impl.NativeLibLoader.load Library(NativeLibLoader.java:103)
at com.sun.opengl.impl.NativeLibLoader.acce ss$200(NativeLibLoader.java:49)
at com.sun.opengl.impl.NativeLibLoader$1.ru n(NativeLibLoader.java:111)
at java.security.AccessController.doPrivile ged(Native Method)
at com.sun.opengl.impl.NativeLibLoader.load Core(NativeLibLoader.java:109)
at com.sun.opengl.impl.windows.WindowsGLDra wableFactory.<clinit>(WindowsGLDrawableF actory.java:60)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at javax.media.opengl.GLDrawableFactory.get Factory(GLDrawableFactory.java:106)
at javax.media.opengl.GLCanvas.chooseGraphi csConfiguration(GLCanvas.java:520)
at javax.media.opengl.GLCanvas.<init>(GLCan vas.java:131)
at javax.media.opengl.GLCanvas.<init>(GLCan vas.java:90)
at gov.nasa.worldwind.awt.WorldWindowGLCanv as.<init>(WorldWindowGLCanvas.java:50)
Java on Windows XP attempts to store the native libraries it downloads at C:\Documents and Settings\<USER>\Local Settings\Temp\
Non local admin users do not have access to this folder. Is there any way to change the applet launcher so that it stores the native lib cache elsewhere?
Thanks,
Jeremy

user11193214 wrote:
JNLPAppletLauncher.loadLibrary("jogl")
..Non local admin users do not have access to this folder. Is there any way to change the applet launcher so that it stores the native lib cache elsewhere?I don't know. One thing I do know is that the JNLPAppletLauncher since plug-in2 architecture JREs allow hooking into JNLP services. Try using web start to launch the applet.

Applet was not running in Browser

I have wriiten one applet (using JMF for playing a song)program and it was run in appletviewer it's work perfectly.After that i was open this prog in browser it doen't work ,it gives following error :
java.lang.NoClassDefFoundError: javax/media/ControllerListener
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NoClassDefFoundError: javax/media/ControllerListener
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)Any one help me,becaz past 4 days i have getting this error ,so i cann't move further any steps on my module ,so any one help me.
Advance Thankx & Regards
K.suresh

Hai Manu
I am using u r code,and change my applet tag like
<APPLET CODE="SimplePlayerApplet.class" WIDTH = "300" HEIGHT = "300" ></XMP>
<PARAM NAME ="FILE" VALUE = "artist - Track 01.mp3" >
</APPLET>Now i am getting error as:
APPLET tag missing CODE parameter.
java.lang.NullPointerException: name
     at sun.applet.AppletClassLoader.getResourceAsStream(Unknown Source)
     at sun.applet.AppletPanel$6.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
the applet program below there
import java.applet.Applet;
import java.awt.*;
import java.io.IOException;
import java.io.PrintStream;
import java.net.MalformedURLException;
import java.net.URL;
import javax.media.*;
public class SimplePlayerApplet extends Applet
    implements ControllerListener
    public SimplePlayerApplet()
        player = null;
        visualComponent = null;
        controlComponent = null;
        progressBar = null;
        firstTime = true;
        CachingSize = 0L;
        panel = null;
        controlPanelHeight = 0;
        videoWidth = 0;
        videoHeight = 0;
        System.out.println("Hai");
public void init()
        setLayout(null);
        setBackground(Color.white);
        panel = new Panel();
        panel.setLayout(null);
        add(panel);
        panel.setBounds(0, 0, 320, 240);
        String s = null;
        MediaLocator medialocator = null;
        Object obj = null;
        System.out.println("IT's from Init");
        System.out.println("S value is:" + s);
        if ((s = getParameter("FILE")) == null)
             System.out.println("S value is:NULL");
            Fatal("Invalid media file parameter");
        try
            URL url = new URL(getDocumentBase(), s);
            System.out.println("URL Value is:" + url);
            s = url.toExternalForm();
        catch(MalformedURLException malformedurlexception) { }
        try
            if((medialocator = new MediaLocator("file:" + s)) == null)
                Fatal("Can't build URL for " + s);
                System.out.println("catch in malformed");
            try
                player = Manager.createPlayer(medialocator);
                System.out.println("it is from create player");
            catch(NoPlayerException noplayerexception)
                System.out.println(noplayerexception);
                Fatal("Could not create player for " + medialocator);
            player.addControllerListener(this);
            System.out.println("player add control");
        catch(MalformedURLException malformedurlexception1)
            Fatal("Invalid media file URL!");
        catch(IOException ioexception)
            Fatal("IO exception creating player for " + medialocator);
    public void start()
        if(player != null)
            player.start();
            System.out.println("This from start");
    public void stop()
        if(player != null)
               System.out.println("This from stop");
            player.stop();
            player.deallocate();
    public void destroy()
        player.close();
        System.out.println("This from Destory");
    public synchronized void controllerUpdate(ControllerEvent controllerevent)
          System.out.println("This from cotrollerUpdate");
        if(player == null)
            return;
        if(controllerevent instanceof RealizeCompleteEvent)
            if(progressBar != null)
                panel.remove(progressBar);
                progressBar = null;
            int i = 320;
            int j = 0;
            if(controlComponent == null && (controlComponent = player.getControlPanelComponent()) != null)
                controlPanelHeight = controlComponent.getPreferredSize().height;
                panel.add(controlComponent);
                j += controlPanelHeight;
            if(visualComponent == null && (visualComponent = player.getVisualComponent()) != null)
                panel.add(visualComponent);
                Dimension dimension = visualComponent.getPreferredSize();
                videoWidth = dimension.width;
                videoHeight = dimension.height;
                i = videoWidth;
                j += videoHeight;
                visualComponent.setBounds(0, 0, videoWidth, videoHeight);
            panel.setBounds(0, 0, i, j);
            if(controlComponent != null)
                controlComponent.setBounds(0, videoHeight, i, controlPanelHeight);
                controlComponent.invalidate();
        } else
        if(controllerevent instanceof CachingControlEvent)
            if(player.getState() > 200)
                return;
            CachingControlEvent cachingcontrolevent = (CachingControlEvent)controllerevent;
            CachingControl cachingcontrol = cachingcontrolevent.getCachingControl();
            if(progressBar == null && (progressBar = cachingcontrol.getControlComponent()) != null)
                panel.add(progressBar);
                panel.setSize(progressBar.getPreferredSize());
                validate();
        } else
        if(controllerevent instanceof EndOfMediaEvent)
            player.setMediaTime(new Time(0L));
            player.start();
        } else
        if(controllerevent instanceof ControllerErrorEvent)
            player = null;
            Fatal(((ControllerErrorEvent)controllerevent).getMessage());
        } else
        if(controllerevent instanceof ControllerClosedEvent)
            panel.removeAll();
    void Fatal(String s)
        System.err.println("FATAL ERROR: " + s);
        throw new Error(s);
    Player player;
    Component visualComponent;
    Component controlComponent;
    Component progressBar;
    boolean firstTime;
    long CachingSize;
    Panel panel;
    int controlPanelHeight;
    int videoWidth;
    int videoHeight;
}

Java Applets do not run when UAC is enabled on Windows 7

Similar Messages

Maybe you are looking for