RT does not run when deployed to 9642 sbRIO LV 2011
I have code deployed to a Ni sbRIO9642 where the RT code does not run when deployed to the when using LabVIEW 2011. It appears the NI-RT.ini file on the target is not being properly configured. I manually configured the ini file using FTP and the RT still will not run. I built a small test application and the RT on that did not run either, although i had hard validatiuon that the FPGA code was indeed running. Thanks - Keith
Hey Martin,
I don't know if this specific problem was resolved, but there was a known issue in LabVIEW Real-Time 2011 (sp1) that exhibited this behavior.
Shared Variables
292012
Return
Real-Time Applications containing typedef Shared Variables fail to run.
If you are building an RTEXE that contains Shared Variables whose data type is based upon a type definition and the build specification is configured to disconnect type definitions the RTEXE will not run.
Workaround: 1.) Manually disconnect the variable from the typedef before building the application 2.) Change the build spec so it doesn't disconnect type definitions
Reported Version: 2011 32-bit
Resolved Version: 2012
Added: 10/11/2011
Although this has been fixed in 2012, and shouldn't be an issue for you developing in LabVIEW 2012. Have you tried implementing a heartbeat VI? to verify if your RT app is actually running and not communicating? (great example here)
Do you have the system state pushier installed on your cRIO? does it point to a memory leak or 100% CPU utilization? (steps to install it found here, if you're not familiar)
Are you using the cRIO in Scan Interface mode? or in the FPGA interface?
Applications Engineer
National Instruments
CLD Certified
Similar Messages
-
AutoPlay does not run when inserting disk
System: dv7-1285dx
Vista Home Premium 64 bit SP1
When inserting a disk into the dvd drive AutoPlay does not run.
The information on the disk can be accessed through windows explorer by right clicking on the drive letter and choosing
open. The contents of the disk are displayed and can be accessed but windows does not recognise whether the disk
is video or data.
AutoPlay does not run from Windows Explorer.
In control panel > autoplay the "Use AutoPlay for all media and devices" is checked, all media have options other than
"take no action".
The driver for the DVD player has been unistalled and reinstalled with no effect.
Disks burned with the drive behave normally on other computers.
AutoPlay runs properly for any device plugged into a USB port.
Any ideas of what to try next?
Thanks
BoHi,
Please check the following steps:
http://windows.microsoft.com/en-AU/windows-vista/Troubleshoot-AutoPlay-problems
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
InfoPath 2010 - Multiple Selection List Box - Rule Does Not Run When Unchecking Value
I have a multiple selection list box on a form. I have a rule that sets the value of another field. There is not condition. Just any time item is checked or unchecked the value of the other field should
change. This works when checking an item in the list box but not when unchecking the item in the list box. My question is - do rules not fire for a multiple selection list box when unchecking an item?Hi,
I have tested in my lab environment, the rules seemed only fire for the latest checking action, and it did not fire when uncheck multiple-selection list box. Here is a workaround for your reference:
http://www.infopathdev.com/forums/p/17850/62269.aspx
However, I’d recommend you use check box instead, since it is much easier to set rule according to value of it. We can set it as true when we check the box, and set it as false when we uncheck it as below:
Then it is simple and clear to make rule according to the value of check box.
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Rebecca Tu
TechNet Community Support -
SSIS Job deployment does not run my .exe but is described as a success
Hi i have scripted a simple script task in c# to run an exe with the following code
Process.start(filename.exe);
i have also tried using the 'Execute Process task' in the SSIS toolbox.
both methods work when i debug.
However when deployed to the SQL server as a job, the jobs are described as a success but my program does not run?!
The exe file is published from SQL visual studio and the resultant filename is setup.exe which i am trying to run.
Any help pleasE?
I am not using any shared file resources, the setup.exe is on my desktop.this is all i get
Message Type
Message Time
Message
Message Source Name
Subcomponent Name
Execution Path
OnPostExecute
8/22/2014 4:15:09 PM
Package:Finished, 4:15:09 PM, Elapsed time: 00:00:00.234.
Package
\Package
OnPostExecute
8/22/2014 4:15:09 PM
Execute Process Task:Finished, 4:15:09 PM, Elapsed time: 00:00:00.203.
Execute Process Task
\Package\Execute Process Task
OnPostValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation is complete.
Execute Process Task
\Package\Execute Process Task
OnPreExecute
8/22/2014 4:15:09 PM
Execute Process Task:Start, 4:15:09 PM.
Execute Process Task
\Package\Execute Process Task
OnPreValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation has started.
Execute Process Task
\Package\Execute Process Task
OnPreExecute
8/22/2014 4:15:09 PM
Package:Start, 4:15:09 PM.
Package
\Package
OnPreValidate
8/22/2014 4:15:09 PM
Package:Validation has started.
Package
\Package
OnPreValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation has started.
Execute Process Task
\Package\Execute Process Task
OnPostValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation is complete.
Execute Process Task
\Package\Execute Process Task
OnPostValidate
8/22/2014 4:15:09 PM
Package:Validation is complete.
Package
\Package
OnInformation
8/22/2014 4:15:08 PM
Package:Information: Succeeded in upgrading the package.
Package
\Package
OnInformation
8/22/2014 4:15:08 PM
run exe:Information: The Script Task "ST_6ba434db5c5649b7b68ab5fb14977781" has been migrated.
The package must be saved to retain migration changes.
run exe
\Package\run exe
OnWarning
8/22/2014 4:15:04 PM
run exe:Warning: Found SQL Server Integration Services 2012 Script Task "ST_6ba434db5c5649b7b68ab5fb14977781"
that requires migration!
run exe
\Package\run exe -
I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?command-option-esc keys and force quit Mail. Then relaunch.
-
Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards. -
My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]] -
I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.
Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
Thank You!
I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
Incidentally, whats up with all of the Java Console Add Ons?
I have:
Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
Also, .NET Framework 0.0.0 Should I uninstall it? -
RE: my input fields does not display when running the page
my input fields does not display when running the page
why is that so?Hi,
Can you send the HTML code for us?
Afonso -
My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?
Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums. -
Why when i run magic bullet with adobe premiere CS5 then adobe premiere CS5 does not run ?
Hi there,
I would like to ask you why when i am using magic bullet and then i am going to open the premiere CS5 , then the adobe premiere CS5 does not run ?First of all , I would like to thank you for the help.
Secondly , I would like to inform you that I used to have the Adobe CS4 but one friend of mine change it into CS5 , but nothing worked properly after it. e
I download the Adobe CS5.5 Master Collection (as trial) from the official site of the Adobe. Then , I download the MB http://www.redgiantsoftware.com/support/faq/product-specific/magic-bullet-looks/226/ from here but when i am going to use the filters , one X shows on the screen and i cant work... Any help ? -
My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.
Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling -
The information on my sim card does not transfer when i run isync
macbook Mac OS X (10.4.9) The information on my sim card does not transfer when i run isync everthig else works fine . i have a nokia 6103
Welcome to Apple Discussions.
There's nothing unusual about that, as the SIM standard is not written to support external data exchanges. In order to synchronize your SIM-stored data, you must first copy or move each contact record into the memory location on your device reserved for contact records not stored on the SIM. -
In guided Access does not unlock when I Press the home button I need to run down the Battery and turn back on and it is then out off guided Access
How To Get Out Of Guided Access On iOS6? : TechNGuide
SOS I cannot Exit Guided access: Apple Support Communities -
Reports in BIDS does not update when stored procedure is modified
Hi,
I am using SQL Server 2008 R2 SP1, and BIDS 2008 SP1. The problem I am about to define does NOT happen when the report is deployed to the report server, but only within the report development environment (BIDS).
From within BIDS my reports are fed by stored procedures. The problem is when I modify a stored procedure in Management Studio, and refresh the report from within BIDS, the report does not reflect the new changes made in the stored procedure. So far I have
found one clumsy solution to this problem:
1) Go to the folder where the project is saved on the file system.
2)Find the ".data" file that is associated to the particular report, then delete it. For instance, if my report name is TestReport.rdl, find the file named TestReport.rdl.data, then delete it.
However, I would like to find a better, and permanent solution. Please comment.
Thank you!Hi AmirBabazadeh,
Base on my research, this issue is caused by data caching in the Business Intelligence Development Studio (BIDS). When we modify the stored procedure in Management Studio, but the data of the report doesn’t change, then it will try to cached data when reprocessing
the report. In this scenario, we should try to refresh the report/dataset, or delete the .rdl.data file to avoid this issue as you are now doing.
In order to refresh the data of the report, the following two methods are for your reference:
Manual refresh: Re-run the stored procedure with Query Designer in Dataset Properties dialog box.
Auto refresh: Set the AutoRefresh property of report to an appropriate value in the Properties window.
Hope this helps.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
Cannot Complete KB2919355 Update, Error Code : 0xc0000001
Hello, I encountered the MS KB2919355 update problem last year, and did not succeed in installing this update. I returned to the problem a few days ago and made some progress, however full installation is still elusive. I have a HP m7-J010DX notebo
-
My iPad 1keeps freezing every time I try to access apple store. I complete all the information including payment account details lithe screen turns grey colour and then freezes . Help please.
-
How do I upload music from my iPod to my new computer's iTunes Library?
To try to explain this simply; I recently purchased a new computer (Toshiba laptop), I have already uploaded some CD's to my Library and synced my iPod Touch to my Library, But when I connect my iPod Classic to my computer's iTunes tells me that my i
-
I have access to the number associated to the SMS that is verified on my account but not the phone its self due to water damage of my previous iPhone. I simply need to enact the SMS verification process.
-
Hello everyone! I have a unusual problem to address. I have recently gotten into HTML coding, and I am using a navigation menu and it requires quotation marks. As seen in the picture on the top, TextEdit keeps inverting them, thus ruining my code! I